It was adding and subtracting the segment base here and there, but it
was also doing so incorrectly, leading to various calculation errors.
Fixed a few bugs uncovered, related to getting a new segment:
* If we reset base_ts/next_ts/out_frame_count, also reset prevbuf
* Only do so if the new segment is different than the previous one
Also replaced a few occurrences of GST_BUFFER_TIMESTAMP with
GST_BUFFER_PTS for consistency.
Integrated the tests of
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2186
, now passing. The test_segment_update_same test had to be fixed,
because it was wrongly assuming that we would not fill the gap inside
the new-but-same segment.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6031>
This allows metas to be serialized to be transmitted or stored. This is
intended to be used for example by gdppay or unixfdsink.
Implemented on GstCustomMeta, GstVideoMeta, GstReferenceTimestampMeta,
and GstAudioMeta.
Sponsored-by: Netflix Inc.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5355>
Otherwise if there is a huge gap it will only be considered a
discontinuity after another discont-time amount of buffers has passed.
Like this it will be immediately a discontinuity if the gap between the
expected and received time becomes bigger than the discont-time.
The last part of the test was actually testing for this behaviour and
expected the previous behaviour. Most other tests also had to be
adjusted because discont will now happen at slightly different times
than before.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5759>
Windows does not support fork() so all tests will run in a single
process, and global variables will be reused across multiple tests.
Thus, each test should reset global variables.
Also, setup pad chain/event functions before playing state
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5752>
Adds list of formats that should be used by element in needs to passthrough
video. It contains the full list of video format plus DMA_DRM format
and will be extended in the future as needed. This patches includes 3 new
symbols:
- GST_VIDEO_FORMATS_ANY_STR
- GST_VIDEO_FORMATS_ANY
- gst_video_formats_any()
The last one can be used by bindings or for code that prefers having
GstVideoFormat values instead of strings.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5386>
Fixes a potential GPU stall if an immediately freed texture/buffer is
attempted to be reused immediately by the CPU, e.g. when uploading.
Problematic scenario is this:
1. element does GPU processing reading from texture
2. frees the buffer back to the pool
3. pool acquire returns the just released buffer
4. GPU processing then has to wait for the previous GPU operation to
complete causing a stall
If there was a reliable way to know whether a buffer had been finished
with across all GPU drivers, we would use it. However as that does not
exist, this workaround is to keep the released buffer unusable until the
next released buffer.
This is the same approach as is used in the qml (Qt5) elements.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5144>
If a depayloader aggregates multiple RTP buffers into one buffer only
the last RTP buffer was checked for header extensions. Now the
depayloader remembers all RTP packets pushed before a output buffer is
pushed and checks all RTP buffers for header extensions.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4979>
These 10bit formats are identical to NV12_16L32S, but 64bytes of data is being
prefixed with 16bytes data with four pixels of lower 2bits per byte. For
MT2110T, the lower two bits set so each bytes contains a column of 4 pixels,
also describe as tiled lower 2 bits. MT2110T has been chosen as a name to match
the vendor chosen name. This format is unlikely to exist for other vendors.
For MT2110R, the 2 low bits are in raster order.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3444>
The current limit is `x10`, which allows just `+20 dB` of gain.
While it may seem sufficient, this came up as a problem
in a real-world, non-specially-engineered situation,
in strawberry's EBU R 128 loudness normalization.
(https://github.com/strawberrymusicplayer/strawberry/pull/1216)
There is an audio track (that was not intentionally engineered that way),
that has integrated loudness of `-38 LUFS`,
and if we want to normalize it's loudness to e.g. `-16 LUFS`,
which is a very reasonable thing to do,
we need to apply gain of `+22 dB`,
which is larger than `+20 dB`, and we fail...
I think it should allow at least `+96 dB` of gain,
and therefore should be at `10^(96/20) ~= 63096`.
But, i don't see why we need to put any specific restriction
on that parameter in the first place, other than the fact
that the fixed-point multiplication scheme does not support volume
larger than 15x-ish.
So let's just implement a floating-point fall-back path
that does not involve fixed-point multiplication
and lift the restriction altogether?
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5063>
Don't assume that compositor will output only single buffer
for single input buffer. If buffer's running time is not completly
aligned to output buffer running time or duration, compositor
can generate multiple buffers. If that happens, two threads,
one is aggregator output thread and main thread were trying
to modify buffer in this test. Clear the buffer after
shutting down pipeline to avoid the race.
Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2836
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5081>
The current implementation copies metas without checking if the buffer
is writable.
The operation that needs to be done, replacing the input buffer and
copying the metas, is only part of that process. We create a new function
that does both.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4912>
If gst_buffer_pool_set_config() fails then the pool will use its old
config. This may include different width or height when
pic_width/pic_height != frame_width/frame_height.
As a result, the assertions in theora_handle_image() will fail.
So check the result of gst_buffer_pool_set_config() and only use the pool
if it succeeds. Otherwise let the parrent decide_allocation() create a new
pool.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4600>
The first serialized events that can be send on a src pad are a CAPS and then a
SEGMENT event.
When handling events from user in appsrc, we used to send a segment
automatically if the SEGMENT has not been sent yet.
This breaks if the CAPS event was not send either as we were now sending
a SEGMENT before the CAPS.
Fix this by delaying such events until the CAPS has been configured.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4297>
Adding propose_allocation is to meet the requirement of Application to
request buffers. Application sometimes need to create buffer pool
and request buffers to maintain buffer management itself, and Gstreamer plugin
import Application's buffers to use. So, add propose_allocation in
appsink like waylandsink and kmssink etc.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4185>
This allows correct handling of wrapping around backwards during the
first wraparound period and avoids the infamous "Cannot unwrap, any
wrapping took place yet" error message.
It allows makes sure that for actual timestamp jumps a valid value is
returned instead of 0, which then allows the caller to handle it
properly. Not having this can have the caller see the same timestamp (0)
for a very long time, which for example can cause rtpjitterbuffer to
output the same timestamp for a very long time.
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1500
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3202>
