When getting caps of the decode chain, in get_topology, the caps are being
checked if fixed or not. But get_topology will be called when the decode is
chain is being exposed and hence it will always be fixed. Hence removing the
check for fixed caps. Removing gst_pad_get_current_caps for the chain->pad, as
get_pad_caps will again call the same api.
And get_topology can return NULL value if currently shutting down the
pipeline, which on being passed to create message will result in assertion
error. Check if topology is valid before using it
https://bugzilla.gnome.org/show_bug.cgi?id=755918
analyze_new_pad() can return a new decode chain, which might have a new
GstDecodePad in the end. We should use those two for expose_pad() and not the
original ones that were passed to analyze_new_pad().
This fails when having a demuxer element that has raw pads immediately or
if a decoder with raw caps is after an adaptive demuxer.
https://bugzilla.gnome.org/show_bug.cgi?id=760949
[..] when resetting group start time. In GES, we are usually connected
to the streamsynchronizer on one audio and one video pad.
When seeking the timeline, both nlecompositions often output their flush_start
before any of them has output its flush_stop.
The current code, when receiving the first flush stop was using the
running time of the start of the second composition, which could
be pretty much anything, and means nothing at that point.
This patch is thread-safe, as STREAM_SYNCHRONIZER_LOCK is taken
both when setting flushing and when checking it.
https://bugzilla.gnome.org/show_bug.cgi?id=750013
When blocking input pads, we also need to properly set the appropriate
pending flag.
Without this, when switching stream types after initial configuration
(like going from Audio+Video to Audio+Video+Sub) playsink would never
wait for *all* input streams to be blocked (it would just wait for the
new input pad (text in this case) to be blocked).
Since the reconfiguration might introduce unlinking/relinking of elements,
we need to ensure that *ALL* input streams are blocked.
Failure to do so would result in having some input streams pushing data
to inactive elements (returning GST_FLOW_FLUSHING) or unlinked pads
(returning GST_FLOW_NOT_LINKED).
A later optimization could involve only blocking the input pads that
might be involved in reconfiguration. But better be safe than sorry for
now :)
Elements usually require that all fields on their caps are present
on the fixed caps they receive. Using intersection won't verify it,
resort to using is_subset() checks.
https://bugzilla.gnome.org/show_bug.cgi?id=760477
Those accept caps are actually checking if downstream supports
some particular caps to check if it need to negotiate a different
format. Checking only the next element with accept-caps is not enough
to guarantee that it is supported.
Using a caps query makes it obtain the supported caps for downstream
as a whole instead of only the next element.
The filters' floating references are sinked during set_property() already,
which means that GstBin takes a new reference when adding the filter to it.
Get rid of the additional reference after adding the filter to the bin.
Unconditionally adding the template caps when proxying the caps query will play
havoc with decoders that attempt to choose an output format based on some caps
features. Creating a sink that does not include those caps features and a
decoder/parser/etc that preferentially chooses some specific caps feature when
available, will always return the decoder/parser/etc template caps and choose a
feature that downstream will be unable to support.
Fix by limiting the addition of the template caps to when the result is actually
empty.
https://bugzilla.gnome.org/show_bug.cgi?id=758212
This reverts commit 77dc09c3a9.
It can cause the FLUSH_START/STOP events to go to the sink elements, which
then causes state changes and various other problems. We shouldn't really
flush downstream here, the idea is to do *draining*.
Apart from that the testcase for the original bug here works without this
commit now.
Otherwise we'll remove that element while keeping its buffering message in our
list, and because of that never ever report buffering 100% as that element
will always be at a lower percentage.
This fixes e.g. seeking over Period boundaries in DASH and various other
issues when buffering happens between group switches.
Also use a new mutex for protecting the buffering messages. The object lock is
already used by gst_object_has_as_ancestor() and we need to use it now for
checking if the buffering message sender has the to-be-removed element as
ancestor.
Make sure that any access to the GstDecodeBin's decode_chain
field is protected using the EXPOSE_LOCK. Also add a simple
reference counter to the GstDecodeChain structure so that when
the type_found signal fires it can hold onto the decode chain
even while the EXPOSE_LOCK is not held. This should fix a
race condition if the type_found signal fires right in the
middle of a state change that messes with the same decode
chain.
https://bugzilla.gnome.org/show_bug.cgi?id=755260
Just setting the ghostpad as flushing wasn't enough. It needs to be
consistent on the internal proxypad also, otherwise you end up in
situations where:
* a pending buffer on the target pad triggers the sticky event
propagation
* the default implementation sees that the proxypad is not flushing,
so it tries to push it to the other pad (the actual ghostpad)
* the ghostpad is flushing, so returns FALSE
* the push_event function sees that pushing the event failed...
* ... and pending buffer push returns GST_FLOW_ERROR, instead of
GST_FLOW_FLUSHING
By using gst_pad_set_active(FALSE), we ensure that both the ghostpad
and the proxypad are flushing/deactivated. The situation above will
no longer occur, and a GST_FLOW_FLUSHING will be returned.
This makes sure that they will always get SEEK events, even if we're currently
in the middle of a group switch (i.e. switching to another
representation/bitrate/etc).
https://bugzilla.gnome.org/show_bug.cgi?id=606382
As stated in GST_PAD_PROBE_HANDLED's documentation, we are
supposed to unref the event before returning.
Fixes an event leak in the validate.hls.playback.play_15s.hls_bibbop
validate scenario.
https://bugzilla.gnome.org/show_bug.cgi?id=754459
Send event directly to playsink instead of letting GstBin iterate
over all sink elements. The latter might send the event multiple times
in case the SEEK causes a reconfiguration of the pipeline, as can easily
happen with adaptive streaming demuxers.
What would then happen is that the iterator would be reset, we send the
event again, and on the second time it will fail in the majority of cases
because the pipeline is still being reconfigured
The logic introduced by
[d50b713: decodebin: set the decode pad target before setting elements to PAUSED]
to expose pads would only ever be able to possibly expose one (the last) pad per element.
Make it so that any exposable pads are able to be exposed rather than just the
last pad returned by connect_element.
https://bugzilla.gnome.org/show_bug.cgi?id=742924
In the case of analyzing a demuxer chain, analyze_new_pad may create
a new GstDecodeChain. This was not propagated to the calling function which as
of [d50b713f decodebin: set the decode pad target before setting elements to PAUSED]
is now required to be able to expose the correct pad.
https://bugzilla.gnome.org/show_bug.cgi?id=742924
In case of reconfiguration, text_pad should be re-connected with
stream synchronizer sink pad. Otherwise we'll leave an unlinked pad around if
there always was a streamsynchronizer text pad.
https://bugzilla.gnome.org/show_bug.cgi?id=756804
Otherwise caps and context queries will disappear into nothing and therefore
fail. With autoplug-query now actually working, users (such as playbin) can
proxy these queries to the selected video sink and be able to select an
more appropriate configuration.
https://bugzilla.gnome.org/show_bug.cgi?id=731204
In case sink implements a streamvolume interface, volume element is being got
from the sink. But this is transfer full. So the memory should be freed before
setting it to NULL. This was resulting in major memory leaks
https://bugzilla.gnome.org/show_bug.cgi?id=755867
Casting to gpointer from gulong generates the following warning with
64bit Windows target MinGW:
gstplaybin2.c: In function 'pad_added_cb':
gstplaybin2.c:3476:7: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
(gpointer) group_id_probe_handler);
^
cc1: all warnings being treated as errors
We should cast to guintptr from gulong before we cast to gpointer.
https://bugzilla.gnome.org/show_bug.cgi?id=754755
The default one will just go through the internal elements which might
just be identity when it is in passthrough which will lead to the query
being handled by the downstream sink, ignoring all that playsinkconvertbin
could actually handle and convert.
https://bugzilla.gnome.org/show_bug.cgi?id=754235
It's only relevant for each group, and by storing it in the group
we have locking and everything else like for the other buffering-related
variables. Locking looks a bit fishy still, but it was like that for a long
time already so shouldn't be worse than before.
Overview:
There are some of interleaved streams which has long-term location of audio data.
It mean the audio data is located far away more than multiqueue size.
In this case, because of multiqueue overrun, the pipeline is stopped.
To prevent hanging-like state, the decodebin needs to handle the queue size.
Caused:
The multiqueue size is not enough, the pipeline will stay being stalled status
and decodebin cannot complete to build decode chain.
In this issue file, decodebin did not receive no_more_pads signal or audio data yet.
Steps to Reproduce:
play the high-resolution(4K file) files or some streaming media(push mode).
Actual Results:
There is no audio or subtitle.
We can see only video or infinite loading.
Resolution:
Decodebin detect this problem, and add extra buffer size to multiqueue.
The multiqueue is larger than before, the next data can be pushed the downstream element.
Additional Information:
The max-preroll extra buffer size is set 8MB.
We can use total pre-roll buffer 10MB.
Only first overrun callback can handle multiqueue size.
https://bugzilla.gnome.org/show_bug.cgi?id=733235
When an upstream element wants to flush downstream, we need to take
all chains/groups into consideration.
To that effect, when a FLUSH_START event is seen, after having it
sent downstream we mark all those chains/groups as "drained" (as if
they had seen a EOS event on the endpads).
When a FLUSH_STOP event is received, we check if we need to switch groups.
This is done by checking if there are next groups. If so, we will switch
over to the latest next_group. The actual switch will be done when
that group is blocked.
https://bugzilla.gnome.org/show_bug.cgi?id=606382
When upstream events/queries reach sinkpads of unlinked groups (i.e.
no longer linked to the upstream demuxer), this patch attempts to find
the linked group and forward it upstream of that group.
This is done by adding upstream event/query probes on new group sinkpads
and then:
* Checking if the pad is linked or not (has a peer or not)
* If there is a peer, just let the event/query follow through normally
* If there is no peer, we find a pad to which to proxy it and return
GST_PROBE_HANDLED if it succeeded (allowing the event/query to be properly
returned to the initial called)
Note that this is definitely not thread-safe for the time being
https://bugzilla.gnome.org/show_bug.cgi?id=606382
