Converting from RGB to YUV: When comparing the info.colorimetry to
GST_VIDEO_COLORIMETRY_BT709 it does not make sense to look at the input
signal because that is of type of RGB. The plugin needs to look at the
output YUV-type and compare GST_VIDEO_COLORIMETRY_BT709 to that, because
that is the YUV-type the plugin needs to convert input-RGB into.
Converting from YUV to RGB: Comparing to the input is correct, but because
here the color encoding info BT601/BT709 is on input side of the plugin.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6046>
Remove optional sprop-stereo and sprop-maxcapture fields from Opus
remote offer caps before intersecting with local codec preferences.
According to https://datatracker.ietf.org/doc/html/rfc7587#section-7.1
those fields are sender-only informative, and don't affect
interoperability.
Fixes cases where the webrtc media will end up receive-only if the
local side wants to send stereo but the remote is sending mono, or
vice versa.
There may be other fields in other codecs, so the implementation
anticipates needing to add further fields and codecs in the future.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5999>
Test included.
The problem appears when aggregator drops the query while
it's being proccessed by the klass->sink_query handler.
This can happen on FLUSH_START event. If the query is still
in the queue, it can be safely dropped, but if it's already
in the klass->sink_query() handler, then sink pad has no
choice and has to wait for the proccessing to complete.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5958>
This simplifies the way it picks the closest caps to preference and take into
consideration the framerate to avoid picking high resolution at 5fps or so.
Simply calculate a "distance" of caps A and B from the preference and put
closest first, sorting by framerate first.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5956>
Use gst_data_queue_push_force() for most events so they
are immediately enqueued. Only gap events and actual buffer
data will now block when the queue is full.
This fixes a problem with non-flushing seek handling
where events following a segment-done event would block
if they precede the SEGMENT event, since only SEGMENT
events would clear the 'eos' state of the multiqueue
queue.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5954>
Don't call wait_event() at all for gap events, as basesink will
end up waiting for the time that the gap event would be rendered
out at the audio device. There's no need to render it at all,
just treat it as a handy point to resync the audio if needed,
let the ringbuffer render silence, and place the next buffer
into the ringbuffer where it belongs.
The only thing we really need to do is make sure the ringbuffer
and clock are running, and wait for preroll.
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2749
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5953>
If GST_PAD_SINK is passed in this means that we're supposed to convert
from sink caps to src caps, not the other way around. In other words, if
GST_PAD_SINK is passed we're supposed to produce the possible output
caps.
Previously this was inverted. This had the effect that glcolorconvert
pretended to be able to convert *to* I420 without glDrawBuffers, which is
not possible, and pretended not to be able to convert *from* I420
without glDrawBuffers, which it always supports.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5947>
The GstMpeg2Picture system_frame_number is guint32, constant 1000 is guint32,
GstV4l2CodecMpeg2Dec *_ref_ts multiplication result is u64 .
```
u64 result = (u32)((u32)system_frame_number * (u32)1000);
```
behaves the same as
```
u64 result = (u32)(((u32)system_frame_number * (u32)1000) & 0xffffffff);
```
so in case `system_frame_number > 4294967295 / 1000`, the `result` will
wrap around. Since the `result` is really used as a cookie used to look
up V4L2 buffers related to the currently decoded frame, this wraparound
leads to visible corruption during MPEG2 decoding. At 30 FPS this occurs
after cca. 40 hours of playback .
Fix this by changing the 1000 from u32 to u64, i.e.:
```
u64 result = (u64)((u32)system_frame_number * (u64)1000ULL);
```
this way, the wraparound is prevented and the correct cookie is used.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5850>
The GstVp9Picture system_frame_number is guint32, constant 1000 is guint32,
GstV4l2CodecVp9Dec v4l2_vp9_frame.*_frame_ts multiplication result is u64 .
```
u64 result = (u32)((u32)system_frame_number * (u32)1000);
```
behaves the same as
```
u64 result = (u32)(((u32)system_frame_number * (u32)1000) & 0xffffffff);
```
so in case `system_frame_number > 4294967295 / 1000`, the `result` will
wrap around. Since the `result` is really used as a cookie used to look
up V4L2 buffers related to the currently decoded frame, this wraparound
leads to visible corruption during VP9 decoding. At 30 FPS this occurs
after cca. 40 hours of playback .
Fix this by changing the 1000 from u32 to u64, i.e.:
```
u64 result = (u64)((u32)system_frame_number * (u64)1000ULL);
```
this way, the wraparound is prevented and the correct cookie is used.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5850>
The GstVp8Picture system_frame_number is guint32, constant 1000 is guint32,
GstV4l2CodecVp8Dec v4l2_vp8_frame.*_frame_ts multiplication result is u64 .
```
u64 result = (u32)((u32)system_frame_number * (u32)1000);
```
behaves the same as
```
u64 result = (u32)(((u32)system_frame_number * (u32)1000) & 0xffffffff);
```
so in case `system_frame_number > 4294967295 / 1000`, the `result` will
wrap around. Since the `result` is really used as a cookie used to look
up V4L2 buffers related to the currently decoded frame, this wraparound
leads to visible corruption during VP8 decoding. At 30 FPS this occurs
after cca. 40 hours of playback .
Fix this by changing the 1000 from u32 to u64, i.e.:
```
u64 result = (u64)((u32)system_frame_number * (u64)1000ULL);
```
this way, the wraparound is prevented and the correct cookie is used.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5850>
In gst_va_allocator_try, the first try is to use derive_image, if it
succeeds, we should use info from derived image to create bufferpool.
If derive fails, then try create_image and give created image info
to the pool.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5778>
When exporting a DMABuf from a VASurface the user might tell that the surface
was allocated with certain fourcc, but the returned VADRMPRIMESurfaceDescriptor
migth tell a different fourcc, as in the case or radeonsi driver, for duplicated
fourcc, such as YUY2 and YUYV.
Originally it was supposed to be a failed exportation. This patch relax this
validation by allowing different fourcc.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5778>
When overlay coordinates are updated, after the initial coordinates
are set, the shader indices are applied to the wrong buffer, resulting
in the background image appearing where the overlay should.
Bind the array buffer before applying subsequent coordinate
updates.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5909>
When level value is greater than 127, it was being clamped but this clamped
value was not the one being actually used. For level values greater than 127
this resulted in an incorrect value being used. As an example, a level value
of 187, after and'ed with 0x7F, it would result in 0x3B being reported as the
level value.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5894>
This reverts a part of de92a6c7f2. Unlike `image_filter` and
`video_filter`, `viewfinder_filter` does not get linked to `src` but
`viewfinderbin_queue`. Thus the fix in the mentioned commit does not
apply for it and should be reverted.
This was not spotted earlier as only the other filters are used in
the project that uncovered the issue.
Fixes: de92a6c7f2 ("camerabin: Fix source updates with user filters")
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5842>
When reopening a v4l2 device, the v4l2object->poll will include some old fds,
which was assigned to this device before. If the pipeline opens multiple v4l2
devices, the old fd may been assigned to other v4l2 devices when reopening
devices.
This will cause the timing of the pipeline become confusing when polling devices,
leading functional abnormalities.
Therefore, when closing v4l2object, remove the old fds in poll to ensure that the
pipeline timing is normal.
Signed-off-by: Chao Guo <chao.guo@nxp.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5840>
Since the AV1 specification is not explicitly mentioning about
the array size bounds, array sizes in scalability structure
should be defined as possible maximum sizes that can have.
Also, this commit removes GST_AV1_MAX_SPATIAL_LAYERS define from
public header which is API break but the define is misleading
and this patch is introducing ABI break already
ZDI-CAN-22300
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5824>
This commit corrects the mapping relationship between RGB and BGR in GST and DRM.
The previous mapping was incorrect, causing potential color mismatches in the output.
The changes are as follows:
{WL_SHM_FORMAT_RGB888, DRM_FORMAT_RGB888, GST_VIDEO_FORMAT_BGR},
{WL_SHM_FORMAT_BGR888, DRM_FORMAT_BGR888, GST_VIDEO_FORMAT_RGB},
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5792>
If the ladspa plugin is enabled explicitly or via auto-features, the
liblrdf dependency can not be disabled.
As the RDF parsing currently provides hardly any features, the possibility
to disable it fairly useful.
Fixes: #3168
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5802>
