Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_transform_caps),
(gst_base_transform_prepare_output_buffer):
Add debug info.
When a buffer is writable, its metadata is also writable so we don't
need to subbuffer (which then makes the buffer not-writable anymore).
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_set_async_enabled),
(gst_base_sink_set_ts_offset), (gst_base_sink_perform_qos):
Add some debug.
Make sure we don't generate invalid QoS messages.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times),
(gst_base_sink_get_position):
The reported position must always be smaller than the last seen
timestamps (or timestamp + duration for reverse).
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times),
(gst_base_sink_get_position_last), (gst_base_sink_get_position):
Fix position query range checks in reverse playback.
Original commit message from CVS:
Based on patch by: Bjarne Rosengren <bjarne at axis dot com>
* libs/gst/base/gstbasesrc.c: (gst_base_src_send_event),
(gst_base_src_get_range), (gst_base_src_pad_get_range),
(gst_base_src_loop), (gst_base_src_set_flushing),
(gst_base_src_change_state):
Make sending an EOS event to the basesrc non-blocking even if the
implementation does blocking waits in the create function. This is done
by unlocking the create function when EOS is sent.
Fixes#535218.
Original commit message from CVS:
Patch by: Sjoerd Simons <sjoerd at luon dot net>
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times):
If nothing else can be used, use the last buffer's start time as
the segment's last stop. Fixes bug #534258.
Original commit message from CVS:
Patch by: Tim-Philipp Müller <tim.muller at collabora co uk>
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_event):
Unref events that the GstBaseTransform::event vfunc didn't want to
have forwarded by the base class. Closes a leak in identity.
Fixes bug #446763.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesink.c: (gst_base_sink_wait_clock):
* libs/gst/base/gstbasesink.h:
Expose a method that was previously used internally to synchronize
against the clock because it can be useful for subclasses too.
GstBaseSink::gst_base_sink_wait_clock()
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_adjust_time),
(gst_base_sink_wait_clock), (gst_base_sink_wait_eos),
(gst_base_sink_do_sync), (gst_base_sink_chain_unlocked):
Refactor adjusting the running_time with latency and offset into a
separate method.
When doing clipping, we still want to use the subclass get_times method,
just in case the DURATION or TIMESTAMP are not set.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_start):
Use right error code when typefinding fails, so we can use
the default (translated) error messages.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_get_range),
(gst_base_src_start):
When the subclass did not set caps on outgoing buffers, configure the
caps we negotiated on the source pad.
When the typefind helper does not find caps, error out properly instead
of doing things with NULL caps.
Original commit message from CVS:
* libs/gst/base/gsttypefindhelper.c: (helper_find_peek):
Sort buffer cache list by end offsets. This makes sure that we don't
stop to search for a cached buffer that contains the requested data
too early.
Also read a minimum of 4k bytes instead of 512 bytes as this is a bit
more efficient. Fixes bug #459862.
Original commit message from CVS:
Patch by: Sjoerd Simons <sjoerd at luon dot net>
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_buffer_alloc):
Check the caps of the buffer returned by gst_pad_alloc_buffer() and
fall back to default negotiation in the chain function if the caps
are different from what was requested. Fixes bug #526768.
Original commit message from CVS:
Based on a patch by: Sjoerd Simons <sjoerd at luon dot net>
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_buffer_alloc):
Don't passthrough buffer allocation too easily if the caps change.
This breaks when working in passthrough mode and upstream changes
it's caps. Fixes bug #526768.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_query_latency),
(gst_base_sink_send_event):
Rearrange the latency query code. We always want to do the upstream
query, even if we are not live so that the upstream elements can get the
latency results too. If we fail doing the query and we are live, we
return TRUE afterwards.
Original commit message from CVS:
* gst/gstutils.c:
* gst/gstutils.h:
API: Deprecate gst_atomic_int_set(), g_atomic_int_set() should be used
now that we depend on new enough GLib.
* gst/gstcaps.c: (gst_static_caps_get):
* gst/gstclock.c: (gst_clock_entry_new):
* gst/gstinfo.c: (_gst_debug_init), (gst_debug_set_colored),
(gst_debug_set_default_threshold), (_gst_debug_category_new),
(gst_debug_category_set_threshold):
* libs/gst/base/gstbasesink.c: (gst_base_sink_init),
(gst_base_sink_set_qos_enabled):
* libs/gst/net/gstnettimeprovider.c:
(gst_net_time_provider_set_property):
Use g_atomic_int_set() instead of gst_atomic_int_set().
Original commit message from CVS:
* docs/design/part-buffering.txt:
Fix some typos and set the estimated total for push mode to -1.
* gst/gstquery.c: (gst_query_new_buffering):
Set buffering-left to 0 as we're not buffering by default.
* libs/gst/base/gstbasesrc.c: (gst_base_src_default_query):
Implement BUFFERING query.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buffer):
Also unset the GAP flag on buffers if we're working inplace but
the element is not GAP-aware.
Mark a comment as FIXME 0.11.
Original commit message from CVS:
Patch by: Mark Nauwelaerts <manauw at skynet be>
* gst/gstclock.h:
* libs/gst/base/gstbasesrc.h:
* libs/gst/base/gstbasetransform.c:
* libs/gst/check/gstcheck.c:
Small documentation fixes. Fixes#523978.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_loop),
(gst_base_sink_get_position_paused):
Add fixme regarding EOS in pull mode.
Fix position reporting in PAUSED for negative rates.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_perform_seek),
(gst_base_src_loop):
The start segment for reverse playback goes from start to last_stop.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_size):
Print element name with g_warning() if there's a problem
with the unit size.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_default_do_seek),
(gst_base_src_loop):
Don't update the last_stop position in do_seek, that's the position we
did a seek to.
Read backwards when we have a negative rate.
* tests/check/elements/filesrc.c: (event_func), (wait_eos),
(setup_filesrc), (cleanup_filesrc), (GST_START_TEST),
(filesrc_suite):
Add check for reverse reading.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_send_event),
(gst_base_src_get_range), (gst_base_src_pad_get_range),
(gst_base_src_loop), (gst_base_src_set_flushing),
(gst_base_src_change_state):
Allow sending EOS to the source to make it send out an EOS event from
the streaming thread.
Update docs and deprecate the old NULL/READY shutdown method.
* tests/check/libs/basesrc.c: (GST_START_TEST),
(gst_basesrc_suite):
Add unit test for controlled shutdown.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_wait_playing),
(gst_base_src_perform_seek), (gst_base_src_get_range),
(gst_base_src_set_playing), (gst_base_src_change_state):
Make _wait_playing() not check any variables so that we can call this
function from subclasses. Move the checks elsewhere similar to
_wait_preroll() in basesink.
Add some debugging.
Only signal the LIVE cond when we are going back to PLAYING.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_set_gap_aware):
* libs/gst/base/gstbasetransform.h:
API: Add gst_base_transform_set_gap_aware() to control whether
the element correctly handles GST_BUFFER_FLAG_GAP or shouldn't
get buffers with this flag at all. Fixes#503231.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstclock.h:
* gst/gstdebugutils.c:
* gst/gstinfo.c:
* gst/gstutils.c:
* gst/gstutils.h:
* libs/gst/base/gstbasesink.c:
* tools/gst-launch.c:
Change GST_GET_TIMESTAMP into gst_util_get_timestamp and replace all
uses as we don't have HAVE_POSIX_TIMERS in public headers.
Thanks Tim for spotting.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_set_last_buffer):
Don't hold the object lock when unreffing a buffer because it could
cause a deadlock when the finalize function wants to grab the object
lock too. Fixes#495133.
Original commit message from CVS:
* gst/gstsegment.c: (gst_segment_set_newsegment_full),
(gst_segment_to_stream_time), (gst_segment_to_running_time):
Also accumulate time correctly when doing reverse playback. Fixes
#488201,
When converting to running and stream time, use default values for
start/stop/time/accum when comparing different formats. Fixes#494245.
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times):
Do running/stream time in TIME format.
* tests/check/gst/gstsegment.c: (GST_START_TEST),
(gst_segment_suite):
2 new unit tests for segment accumulation.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_default_query),
(gst_base_src_perform_seek), (gst_base_src_default_event),
(gst_base_src_set_flushing), (gst_base_src_activate_push),
(gst_base_src_activate_pull):
Unify flushing code, remove some old unlock code that is no longer used.
Take the streaming lock when seeking to avoid races. Fixes#492729.
Added some more comments.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times),
(gst_base_sink_do_sync), (gst_base_sink_preroll_object),
(gst_base_sink_event), (gst_base_sink_get_position_last),
(gst_base_sink_get_position_paused), (gst_base_sink_get_position),
(gst_base_sink_change_state):
Don't try to report a 0 position when we don't know, return -1 and FALSE
instead. This mostly happens when we are prerolling.
Make sure we can report the right position before we post the ASYNC_DONE
message so that a message handler can query position without races.
* tests/check/generic/sinks.c: (send_eos), (GST_START_TEST),
(async_done_handoff), (async_done_func), (send_buffer),
(async_done_eos_func), (gst_sinks_suite):
Add two tests for the above.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_get_last_buffer), (gst_base_sink_set_last_buffer),
(gst_base_sink_get_property), (gst_base_sink_render_object),
(gst_base_sink_preroll_object),
(gst_base_sink_queue_object_unlocked), (gst_base_sink_event),
(gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
Add a new last-buffer property that contains the last buffer used in
basesink for preroll or rendering. useful for making snapshots.
API: gst_base_sink_get_last_buffer()
API: GstBaseSink::last-buffer
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_event):
Reset last seen position after flushing so that we don't report the old
position anymore.
Original commit message from CVS:
Patch inspired by: Benoit Fouet <benoit dot fouet at purplelabs dot com>
* libs/gst/base/gstbasesink.c: (gst_base_sink_wait_eos),
(gst_base_sink_event):
* libs/gst/base/gstbasesink.h:
Add function to wait for EOS, subclasses can use this to correctly wait
for devices to drain before performing the EOS logic. Fixes#485343.
API: gst_base_sink_wait_eos()
