This fixes the regression introduced in 64acc74.
If a pad supports multiple set of capsfeatures, it needs to add
multiple equal structures with different feature sets to the caps.
Because caps structures with the same name but with a non-equal
set of caps features are not compatible.
Without this patch, playbin will autoplug xvimagesink instead of vaapisink.
https://bugzilla.gnome.org/show_bug.cgi?id=750095
This is a work-around to satisfy the va-intel-driver.
Normalize the quality factor and scale QM values (only for packed header
generation) similar to what VA-Intel driver is doing . Otherwise the
generated packed headers will be wrong, since the driver itself is
scaling the QM values using the normalized quality factor.
https://bugzilla.gnome.org/show_bug.cgi?id=748335
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
Fix uninitialized variables when decoding SPS and PPS NAL units from
"codec-data" buffers. This is particularly important when seeking ops
are involved, and the new persistent states are used more often.
https://bugzilla.gnome.org/show_bug.cgi?id=750094
This is a naïve approach to the calculation of the VA-API decoding latency. It
takes into consideration when the frame-rate has some insane value.
https://bugzilla.gnome.org/show_bug.cgi?id=740419
The approximation of 6 times compression ratio migh not
work in all cases. Especially when enabling I frames.
Provide large enough size for coded-buffer creation.
The approximation of 4 times compression ratio will not
work in all cases. Especially when enabling I frames.
Provide large enough size for coded-buffer creation.
Implement decoding process for gaps in frame_num (8.5.2). This
also somewhat supports unintentional loss of pictures.
https://bugzilla.gnome.org/show_bug.cgi?id=745048https://bugzilla.gnome.org/show_bug.cgi?id=703921
Original-patch-by: Wind Yuan <feng.yuan@intel.com>
[fixed derivation of POC, ensured clone is valid for reference,
actually fixed detection of gaps in FrameNum by PrevRefFrameNum]
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Try to identify missing first fields too, thus disregarding any
intermediate gaps in frames. We also assume that we keep the same
field sequence, i.e. if previous frames were in top-field-first
(TFF) order, then so are subsequent frames.
Note that insertion of dummy first fields need to operate in two
steps: (i) create the original first field that the current field
will inherit from, and (ii) submit that field into the DPB prior
to initializing the current (other) field POC values but after any
reference flag was set. i.e. copy reference flags from the child
(other field) to the parent (first field).
https://bugzilla.gnome.org/show_bug.cgi?id=745048
Interlaced H.264 video frames always have two fields to decode and
display. However, in some cases, e.g. packet loss, one of the field
can be missing. This perturbs the reference picture marking process,
whereby the number of references available in DPB no longer matches
the expected value.
This patch adds initial support for missing field within a decoded
frame. The current strategy taken is to find out the nearest field,
by POC value, and with the same parity.
https://bugzilla.gnome.org/show_bug.cgi?id=745048
Try to maintain a "top-field-first" (TFF) flag, even if the H.264 standard
does not mandate it. This will be useful for tracking missing fields, and
also for more correct _split_fields() implementation for frames in the DPB.
Don't try to decode pictures until the first I-frame is received within
the currently active sequence. There is no point is decoding and then
displaying frames with artifacts.
Fix decoding of end_of_seq() NAL unit so that to not submit the current
picture for decoding again. This is pretty vintage code that dates back
before the existing of the whole decoder units machinery.
One issue that could be arising if that code was kept is that we could
have submitted a picture, and subsequently a GstVideoCodec frame, twice.
Once without the decode_only flag set, and once with that flag set. The
end result is that the GstVideoDecoder would release the codec frame
twice, thus releasing stale data.
In short, the piece of code that is removed by this patch is for once
completely obsolete for a while, and secondly error-prone in corner
cases.
If the GOP temporal sequence number (TSN) is interpolated from a valid
PTS, then we need to compensate that PTS corresponding to the start of
GOP with the next picture to be decoded, which shall be an I-frame,
based on its sequence number.
https://bugzilla.gnome.org/show_bug.cgi?id=748676
b7dded3: h264parse: don't consider unknown stream-format as avc
5110ad9: h264parse: fix up handling of input caps corner cases
e51db3e: h264parse: Remove dead code
3d739d0: codecparser: h265: Fix the number of tile rows/columns parsing
8482957: h265parse: Fix profile, tier and level setting in caps
4649acb: h265parse: Fix the memory freeing of stored VPS nals
f2beeb7: h265parse: Fix source caps to report cropped dimensions
6886a31: h264parse: Fix profile and level setting in caps
5286c1a: h264parse: Consider SEI NALU as "HEADER" packets
eb97854: videoparsers: h264: bit-exact sync with upstream, minor changes here and there
53074fc: build: Upgrade GStreamer dependency to 1.0
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
Before pushing a the new frame, the render() method calls sync() to flush the
pending frames. Nonetheless, the last pushed frame never gets rendered, leading
to a memory leak too.
This patch calls sync() in the destroy() to flush the pending frames before
destroying the window.
Also a is_cancelled flag is added. This flag tells to not flush the event
queue again since the method failed previously or were cancelled by the user.
https://bugzilla.gnome.org/show_bug.cgi?id=749078
Otherwise wl_display_dispatch_queue() might prevent the pipeline from
shutting down. This can happen e.g. if the wayland compositor exits while
the pipeline is running.
Changes:
* renamed unlock()/unlock_stop() to unblock()/unblock_cancel() in gstvaapiwindow
* splitted the patch removing wl_display_dispatch_queue()
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=747492https://bugzilla.gnome.org/show_bug.cgi?id=749078
wl_display_dispatch_queue() might prevent the pipeline from shutting
down. This can happen e.g. if the wayland compositor exits while the
pipeline is running.
This patch replaces it with these steps:
- With wl_display_prepare_read() all threads announce their intention
to read.
- wl_display_read_events() is thread save. On threads reads, the other
wait for it to finish.
- With wl_display_dispatch_queue_pending() each thread dispatches its
own events.
wl_display_dispatch_queue_pending() was defined since wayland 1.0.2
Original-patch-by: Michael Olbrich <m.olbrich@pengutronix.de>
* stripped out the unlock() unlock_stop() logic
* stripped out the poll handling
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=749078https://bugzilla.gnome.org/show_bug.cgi?id=747492
Since frame in the private data means the last frame sent, it would
semantically better use last_frame.
Also, this patch makes use of g_atomic_pointer_{compare_and_exchange, set}()
functions.
https://bugzilla.gnome.org/show_bug.cgi?id=749078
Wayland window has a pointer to the last pushed frame and use it to set the
flag for stopping the queue dispatch loop. This may lead to memory leaks,
since we are not keeping track of all the queued frames structures.
This patch removes the last pushed frame pointer and change the binary flag
for an atomic counter, keeping track of number of queued frames and use it for
the queue dispatch loop.
https://bugzilla.gnome.org/show_bug.cgi?id=749078
This patch takes out the wayland's buffer from the the frame structure. The
buffer is queued to wayland and destroyed in the "release" callback. The
frame is freed in the surface's "done" callback.
In this way a buffer may be leaked but not the whole frame structure.
- surface 'done' callback is used to throttle the rendering operation and to
unallocate the frame, but not the buffer.
- buffer 'release' callback is used to destroy wl_buffer.
Original-patch-by: Zhao Halley <halley.zhao@intel.com>
* code rebase
* kept the the event_queue for buffer's proxy
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=749078
This patch fixes several issues found when running the `make distcheck`
target:
- In commit c561b8da, the update of gstcompat.h in Makefile.am was
forgotten.
- In commit c5756a91 add the simple_encoder_source_h in EXTRA_DIST was
forgotten.
- vpx.build.stamp is not generated at all, only vpx.configure.stamp.
- The make target distcleancheck failed because some autogenerated files
were not handled with the DISTCLEANFILES variable.
Note: `make distcheck -jXX` is not currently supported.
