mirrors/gstreamer
mirrors/gstreamer
1
1
Fork 0
mirror of https://gitlab.freedesktop.org/gstreamer/gstreamer.git synced 2024-11-28 12:41:05 +00:00
Code Issues 1 Projects Releases Wiki Activity
10214 commits 44 branches 1509 tags 436 MiB
Commit graph

5164 commits

Author SHA1 Message Date
Vincent Penquerc'h
26ae233035 matroskademux: fix stuttering A/V 
Someone got had by implicit promotion to unsigned in ops with
a signed and an unsigned value.

https://bugzilla.gnome.org/show_bug.cgi?id=659153
 2011-09-15 17:29:00 +01:00
Vincent Penquerc'h
352bab2ef7 navseek: toggle pause/play on space bar 
A useful thing to have.

https://bugzilla.gnome.org/show_bug.cgi?id=659065
 2011-09-14 21:32:42 +01:00
David Svensson Fors
682ae32f6f matroskademux: configurable timestamp gap handling 
matroskademux performs segment tricks to skip gaps in streams,
notably at start for non 0 based files.  There may however be
cases when full presentation (including intermediate gaps) is
desired, so a property allows to configure as of which gap
to act (or not at all).

API: GstMatroskaDemux::max-gap-time

Fixes #659009.
 2011-09-14 14:49:36 +02:00
Thiago Santos
261d11a6d7 qtmux: Fix ctts generation for streams that don't start at 0 timestamps 
Subtract the first timestamp of a stream from all input buffers to
get 0-based timestamps for creating a sane ctts table. Without this
patch the ctts could have larger values than needed, causing the
playback to have a delay at startup.

As the first timestamp is only found after a few buffers are queued
(due to possible reordered buffers), once we find the first timestamp
we subtract it from all buffers on the queue, from that point on,
all buffers have their timestamps subtract when they are collected.

https://bugzilla.gnome.org/show_bug.cgi?id=658659
 2011-09-12 07:37:10 -03:00
Alessandro Decina
aea09188dc flvmux: don't release request pads going PAUSED->READY 
Don't release request pads but just reset them. This makes pipelines using
flvmux reusable.
 2011-09-12 10:00:59 +02:00
Vincent Penquerc'h
d17d13219c ac3parse: use bsid 9 and 10 to control sample rate 
See http://matroska.org/technical/specs/codecid/index.html

The spec is silent about this though...

https://bugzilla.gnome.org/show_bug.cgi?id=658546
 2011-09-09 13:59:31 +02:00
Mark Nauwelaerts
95b5ece2c9 rtspsrc: ensure some initial state variable setup 
... which might otherwise be skipped if the PLAY command is issued before
the OPEN command had a chance to actually be acted upon.

Fixes #657376.
 2011-09-09 10:53:08 +02:00
Mark Nauwelaerts
ef1ad78eee matroskademux: tweak gap handling 
... so as to avoid buffers before and after gap to have identical running time.
 2011-09-08 15:10:43 +02:00
Thiago Santos
ed3adece77 qtmux: remove one G_UNLIKELY for user property 
Using G_UNLIKELY on user properties isn't nice, specially when
that is the default option.
 2011-09-07 11:46:07 -03:00
Andoni Morales Alastruey
782fc78d57 matroskamux: handle GstForceKeyUnit event 
... by starting a new cluster after forwarding event.

Fixes #644154.
 2011-09-07 14:51:56 +02:00
Sebastian Dröge
c29069fd11 ac3parse: Add Converter to the classification because it can convert between different alignments 
This allows decodebin2 to let it negotiate properly.
 2011-09-07 12:11:39 +02:00
Sebastian Dröge
786d35f53f audioparsers: Improve src template caps 
Remove the parsed/framed fields and add all fields to the template
caps that always exist.
 2011-09-07 12:10:48 +02:00
Mark Nauwelaerts
625e7a6143 aacparse: parse codec_data to determine number of samples per frame 
Fixes #656734.
 2011-09-07 11:20:03 +02:00
Mark Nauwelaerts
aa0ae490d0 matroskamux: make default duration check less sensitive 
Frame duration might vary for 1 usecond, in this case matroskamux
decides to create BLOCKGROUP instead of SIMPLEBLOCK.

Convert duration to timecodescale which is (typically) less precise, and
then also allow the difference of 1/-1 to arrange for less sensitive check.

Based on patch by Alexey Fisher <bug-track@fisher-privat.net>

Fixes #653080.
 2011-09-06 15:09:13 +02:00
Mark Nauwelaerts
06f8e356a6 rtpmp4gdepay: improve bogus interleaved index compensating 
Patch by <gudake@gmail.com>

Fixes #654585.
 2011-09-06 13:20:23 +02:00
Mark Nauwelaerts
b9a54a38b0 amrparse: fix and streamline valid frame checking 
... to handle various combinations of sync or not, and sufficient data
or not as might be expected.

Fixes #650714.
 2011-09-05 15:51:48 +02:00
Mark Nauwelaerts
4b8ead4340 qtdemux: fragmented support; avoid adjustment for keyframe seek 
... since all index data may not yet be available at that time.
 2011-09-05 14:56:18 +02:00
Mark Nauwelaerts
08d25a69d5 qtdemux: fragmented support; mark all audio track samples as keyframe 2011-09-05 14:56:18 +02:00
Brian Li
a3e9b676c0 qtdemux: fragmented support; properly init return variable value 
Fixes #655918.
 2011-09-05 14:56:08 +02:00
Mark Nauwelaerts
2603c2079d rtspsrc: add gtk-doc for new short-header property 2011-09-05 13:32:17 +02:00
Marc Leeman
ce276d903c rtspsrc: allow sending short RTSP requests to a server 
Some encoders (Arecont) do not like the long OPTIONS sent at startup as sent by
GStreamer, but do accept the short header as sent by Live555.

This patch makes the extending the request optional by adding a property
(short-header).

Fixes #655805.

API: GstRTSPSrc:short-header
 2011-09-05 13:26:06 +02:00
Olivier Crête
d4778dbe43 rtph263ppay: Set H263-2000 if thats what the other side wants 
The static caps states this element supports H263-2000, but setcaps never
sets it, so it was lie.

See https://bugzilla.gnome.org/show_bug.cgi?id=577784
 2011-09-05 12:58:55 +02:00
Olivier Crête
b2e8362767 rtpsession: Initialise the last_keyframe_request variable 2011-09-02 19:24:46 -04:00
Peter Korsgaard
d73410c4af multiudpsink: make add/remove/clear/get-stats action signals 
http://bugzilla.gnome.org/show_bug.cgi?id=657830

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
 2011-09-01 22:54:27 +01:00
Mark Nauwelaerts
e15d29ffe4 qtdemux: push mode; perform some extra checks prior to upstream seeking 2011-08-30 14:24:04 +02:00
Mark Nauwelaerts
9de9d7e4d4 qtdemux: push mode; fix buffered streaming 
That is, in case where no seek is peformed to moov, but preceding
limited mdat is buffered.
 2011-08-30 14:23:49 +02:00
Mark Nauwelaerts
5ea19b0696 qtdemux: avoid overflow wraparound in timestamp when adding durations 
Do some type juggling to avoid overflow, while still allowing for 'negative'
durations (which would need a wraparound effect).
 2011-08-29 15:16:16 +02:00
Vincent Penquerc'h
f3fc3e1f69 aacparse: only require two frames in a row when we do not have sync 
This avoids a single bit error dropping two frames unnecessarily.
The two consecutive frames check is still required when we don't
have sync.

https://bugzilla.gnome.org/show_bug.cgi?id=657080
 2011-08-24 08:26:31 +02:00
David Schleef
88557c4792 breakmydata: element is not passthrough 2011-08-21 15:15:14 -07:00
David Schleef
2a83da13fc multifilesrc: quiet debugging 2011-08-21 15:15:14 -07:00
David Schleef
0446787e65 deinterlace: change field handling through methods 
This likely breaks stuff.  The good: all of the methods now create
field images aligned with input frames, without timestamp mangling.
The bad: this touches a lot of code, much of which is hairy and in
need of cleanup.  However, at this point we can reasonably create a
PSNR-based test.
 2011-08-21 15:15:14 -07:00
Alessandro Decina
ad996feb28 multifilesink: reset ->streamheaders to NULL on _stop 
Fixes invalid memory access reusing multifilesink
 2011-08-21 14:41:59 +02:00
Vincent Penquerc'h
e032d26674 matroskademux: ensure no-more-pads is always emitted 
In particular, do so even if failing to read while prerolling,
such as when reading from a partial file (eg, while it is being
downloaded).

This fixes a wedge in playbin2.

https://bugzilla.gnome.org/show_bug.cgi?id=651965
 2011-08-18 11:30:07 +02:00
Vincent Penquerc'h
f8a9f5bc1c spectrum: avoid crashing by resetting the correct number of channels 
https://bugzilla.gnome.org/show_bug.cgi?id=656606
 2011-08-16 22:44:07 +01:00
Vincent Penquerc'h
6ac7ad8a2c flacparse: fix off by one in frame size check 
Yes, I was tracking another bug and the small test file I generated
to test with improbably just happened to trigger this, with a second
and last frame of 1615 bytes.

https://bugzilla.gnome.org/show_bug.cgi?id=656649
 2011-08-16 13:25:30 +01:00
Tim-Philipp Müller
5866c3a413 id3demux: remove specs from git as well now that parsing code is in -base 2011-08-14 20:46:01 +01:00
Mark Nauwelaerts
1ca89389e4 id3demux: use -base provided id3 tag parsing 
https://bugzilla.gnome.org/show_bug.cgi?id=654388
 2011-08-13 23:19:32 +01:00
Stefan Kost
a1b1d19105 qtdemux: initialize bitrate variable and reset for each loop 
Don't check eventually unset variable and don't accidentially use values from last
cycle.
 2011-08-12 16:32:58 +02:00
Edward Hervey
d08e0ccc48 rtspsrc: Properly error out if SDP contains no streams 
Also fixes unitialized variable error on macosx.
 2011-08-09 11:28:17 +02:00
Jan Schmidt
1438bf26ac matroska: Register new debug category 
Register the matroskareadcommon debug category when the
plugin is loaded to avoid assertion output when debug is turned on.
 2011-08-03 22:52:07 +10:00
Philippe Normand
0424368cfc qtdemux: soften assertion check on stream size 
https://bugzilla.gnome.org/show_bug.cgi?id=655570
 2011-08-03 10:11:59 +02:00
Robert Krakora
f7893b8721 rtpjpegpay: Add support for H.264 payload in MJPEG container 
See http://www.quickcamteam.net/uvc-h264/USB_Video_Payload_H.264_0.87.pdf

Fixes bug #655530.
 2011-08-03 10:09:42 +02:00
Tim-Philipp Müller
a1712ad87c docs: fix two more Since: tags 2011-08-02 23:42:58 +01:00
Mart Raudsepp
62cd1215c7 deinterlace: Fix Since tags for fieldanalysis related new properties 
commit c1b100cf9c is after 0.10.29 and 0.10.30 was a branched release.
So fix Since tags from 0.10.29 to 0.10.31 for the new properties.
 2011-08-02 23:38:13 +01:00
Mark Nauwelaerts
c03648c8bb rtpsession: properly init rtcp_min_interval 2011-07-29 12:08:42 +02:00
Mark Nauwelaerts
3a98f6f0fd rtpssrcdemux: keep a ref on the src pad while using it 
Prevent a possible race if clear_ssrc() is called between getting the pad and
doing the push.

Based on patch by <olivier.crete@collabora.com>

https://bugzilla.gnome.org/show_bug.cgi?id=650916
 2011-07-28 14:51:01 +02:00
Olivier Crête
c7b9b98648 rtpssrcdemux: Make the pads lock recursive and hold it across the signal emit 
We need to keep the lock held because we don't want a push before the "new-ssrc-pad"
handler has completed. But we may want to push an event from inside that handler, hence
the recursive mutex.

https://bugzilla.gnome.org/show_bug.cgi?id=650916
 2011-07-28 14:50:59 +02:00
Olivier Crête
e26b5391c2 rtpssrcdemux: Use PADs lock 
https://bugzilla.gnome.org/show_bug.cgi?id=650916
 2011-07-28 14:50:57 +02:00
Sjoerd Simons
4c73439ee3 rtph264depay: Cope with FU-A E bit not being set 
Some h264 payloaders are unfortunately buggy and don't correctly set the
E bit in FU-A NAL when they have ended. Work around this by assuming
such a fragmentation unit has ended when there was no packet loss and a
new NAL is started
 2011-07-27 18:18:13 +01:00
Arun Raghavan
89564fcb69 ac3parse: Support switching alignment on-the-fly 
This allows switching of alignment for E-AC3 streams at run-time. This
is requested by downstream elements via a custom event.

https://bugzilla.gnome.org/show_bug.cgi?id=650313
 2011-07-27 20:43:56 +05:30