The outgoing buffer timestamp is calculated by scaling an output buffer
count by the src pad frame rate caps. If these caps change, we need to
reset the count and work from a new base timestamp. The new output
buffer timestamp is then the count scaled by the new caps values added
onto the base timestamp.
We currently don't use the GAP flag for video and the docs say
that this is for buffers, that have been created to fill a gap
and contains neutral data. For video this is the previous frame.
This information can be used by encoders to encode the duplicated
frames more efficiently. See bug #627459.
Add a property that makes videorate skip to the first buffer it
receives instead of padding the stream from segment start to the
first real buffer.
Fixes bug #567928.
Handle buffers with -1 timestamps better by keeping track of the en time of the
previous buffer and assuming the -1 timestamp buffer goes right after the
previous one.
when we have two buffers that are equally good, output the oldest buffer once to
minimize latency.
don't try to calculate latency when the input framerate is unknown.
When videorate duplicates a buffer with a DISCONT flag, it copies the discont on
the first pushed buffer but fails to clear it for subsequent buffers. This
causes theoraenc!oggmux and possibly other elements to consider this a discont
stream.
Fix videorate to produce discont as the first buffer and after a flushing seek.
Fixes#580271.
Original commit message from CVS:
Patch by: Mark Nauwelaerts <manauw at skynet be>
* gst/videorate/gstvideorate.c: (gst_video_rate_reset),
(gst_video_rate_flush_prev), (gst_video_rate_event),
(gst_video_rate_chain):
* gst/videorate/gstvideorate.h:
React (more) to NEWSEGMENT
Small adjustment in timestamp calculation to prevent mismatches
Fixes#435633.
Original commit message from CVS:
* gst/videorate/gstvideorate.c: (gst_video_rate_init),
(gst_video_rate_query):
Use boilerplate.
Add latency query, might not be perfect yet but already works a lot
better. Fixes#442557.
Original commit message from CVS:
* gst/videorate/gstvideorate.c: (gst_video_rate_chain):
There is no sensible way to handle incoming buffers which don't have a
valid timestamp. We therefore discard them and wait for the next one.
Original commit message from CVS:
Patch by: Dan Williams <dcbw redhat com>
* gst/videorate/gstvideorate.c: (gst_video_rate_chain):
Don't leak incoming buffer if gst_pad_push() returns a
non-OK flow. Fixes#432755.
* tests/check/elements/videorate.c: (GST_START_TEST),
(videorate_suite):
Unit test for the above by Yours Truly.
Original commit message from CVS:
* gst/videorate/gstvideorate.c: (gst_video_rate_setcaps),
(gst_video_rate_chain):
Add some debug.
* tests/check/elements/videorate.c: (GST_START_TEST),
(videorate_suite):
Added check for videorate changing caps handling. Closes#421834.
Original commit message from CVS:
2007-03-29 Andy Wingo <wingo@pobox.com>
* gst/videorate/gstvideorate.c (gst_video_rate_flush_prev): Make
perfect offsets also, not just timestamps.
* tests/check/elements/videorate.c (test_more): Test that given
any incoming offsets, that videorate produces perfect offsets.
Original commit message from CVS:
* gst/videorate/gstvideorate.c: (gst_video_rate_setcaps),
(gst_video_rate_reset), (gst_video_rate_chain):
If videorate changes caps, we can no longer use the old buffer
(which may have a different size, incompatible with our caps).
So don't do that; just duplicate the new frame more times.
Original commit message from CVS:
2006-10-10 Zaheer Abbas Merali <zaheerabbas at merali dot org>
Patch by: Josep Torre Valles <josep@fluendo.com>
* ext/gnomevfs/gstgnomevfssink.c:
* ext/gnomevfs/gstgnomevfssrc.c:
Fix URI interface implementation return type.
* ext/pango/gsttextoverlay.c: (gst_text_overlay_set_property):
Fix what looks like a copy/paste issue when assigning values.
* gst-libs/gst/audio/gstaudiofiltertemplate.c:
(gst_audio_filter_template_get_type):
Cast to prevent Forte warnings.
* gst-libs/gst/cdda/gstcddabasesrc.c: (gst_cdda_base_src_create):
Fix URI interface implementation return type.
gst_pad_query_position requires a signed integer pointer as
3rd parameter, GstClockTime is unsigned.
* gst/audioconvert/audioconvert.c:
Fix integer overflow when treated as signed.
* gst/audioresample/resample.c: (resample_add_input_data):
Cast to prevent warnings on Forte.
* gst/ffmpegcolorspace/imgconvert.c: (build_rgb_palette):
Fix integer overflow when treated as signed.
* gst/ffmpegcolorspace/imgconvert_template.h:
Fix integer overflow when treated as signed. RGBA_OUT shifts bits.
* gst/playback/gstdecodebin.c: (queue_filled_cb),
(cleanup_decodebin):
Who initialises a guint to -1!
Cast function pointers to prevent warnings on Forte.
* gst/playback/gstplaybasebin.c: (queue_deadlock_check),
(queue_threshold_reached):
Cast function pointers correctly to prevent warnings on Forte.
* gst/playback/gststreaminfo.c: (gst_stream_info_dispose):
Cast function pointers correctly to prevent warnings on Forte.
* gst/subparse/gstssaparse.c: (gst_ssa_parse_setcaps):
Obvious change to unsigned, 0xEF > max signed char.
* gst/tcp/gstmultifdsink.c: (get_buffers_max), (count_burst_unit):
GstClockTime is unsigned, initialise correctly.
* gst/tcp/gsttcp.c: (gst_tcp_socket_write):
Cast so pointer arithemetic doesn't cause warnings on Forte.
* gst/videorate/gstvideorate.c:
Use correct return value.
* tests/examples/seek/scrubby.c:
GstClockTime is unsigned, initialise correctly.
Original commit message from CVS:
* gst/audiorate/gstaudiorate.c: (gst_audio_rate_chain):
Set caps on outgoing buffers.
* gst/videorate/gstvideorate.c: (gst_video_rate_flush_prev),
(gst_video_rate_event), (gst_video_rate_chain):
* gst/videorate/gstvideorate.h:
Fix videorate some more. Fixes#357977
Original commit message from CVS:
* gst/videorate/gstvideorate.c: (gst_video_rate_reset),
(gst_video_rate_swap_prev), (gst_video_rate_chain):
fix up docs
fix a leak when no caps negotiated
fix counting of input frames
* tests/check/elements/.cvsignore:
* tests/check/elements/videorate.c: (assert_videorate_stats),
(GST_START_TEST), (videorate_suite):
add tests for these
Original commit message from CVS:
Patch by: Edward Hervey <edward@fluendo.com>
* gst/videorate/gstvideorate.c: (gst_video_rate_chain):
* tests/check/Makefile.am:
* tests/check/elements/videorate.c: (assert_videorate_stats),
(setup_videorate), (cleanup_videorate), (GST_START_TEST),
(videorate_suite), (main):
Fix an infinite loop if frames are passed in with wrongly ordered
timestamps. Fixes#339013.
Original commit message from CVS:
2006-04-06 Andy Wingo <wingo@pobox.com>
* gst/videorate/gstvideorate.c (gst_video_rate_reset)
(gst_video_rate_init): Caps-related parameters should not be reset
by a flush -- move their inits to the instance init function.
(gst_video_rate_flush_prev): Don't complain if gst_pad_push
is not OK, just return the result.
* gst/audiotestsrc/gstaudiotestsrc.c
(gst_audio_test_src_class_init)
(gst_audio_test_src_get_times): Re-enable is-live=true, as was
broken by Stefan's commit on 24 March.
Original commit message from CVS:
2006-04-04 Andy Wingo <wingo@pobox.com>
* gst/videorate/gstvideorate.c (gst_video_rate_flush_prev):
Whoops, fix bug introduced. Bad hacker!
Original commit message from CVS:
2006-04-04 Andy Wingo <wingo@pobox.com>
* gst/videorate/gstvideorate.c (gst_video_rate_flush_prev):
Properly handle the case where you get EOS before any buffers are
received. Use gst_buffer_make_metadata_writable where appropriate.
Original commit message from CVS:
* docs/libs/gst-plugins-base-libs-docs.sgml:
* docs/libs/gst-plugins-base-libs-sections.txt:
* docs/libs/gst-plugins-base-libs.types:
* docs/plugins/Makefile.am:
* docs/plugins/gst-plugins-base-plugins-docs.sgml:
* docs/plugins/gst-plugins-base-plugins-sections.txt:
Added some more docs to libs and plugins.
* gst-libs/gst/audio/gstringbuffer.c:
(gst_ring_buffer_prepare_read), (gst_ring_buffer_clear):
* gst-libs/gst/audio/gstringbuffer.h:
Document ringbuffer some more.
* gst/videorate/gstvideorate.c: (gst_video_rate_class_init),
(gst_video_rate_setcaps), (gst_video_rate_reset),
(gst_video_rate_init), (gst_video_rate_flush_prev),
(gst_video_rate_swap_prev), (gst_video_rate_event),
(gst_video_rate_chain), (gst_video_rate_change_state):
* gst/videorate/gstvideorate.h:
Fix videorate to use segments.
Make it work with 0/1 framerates (closes#331903)
Handle EOS correctly.
Added docs.
Original commit message from CVS:
* gst-libs/gst/audio/audio.h: (GST_CLOCK_TIME_TO_FRAMES)
* gst-libs/gst/audio/gstbaseaudiosink.c: (gst_base_audio_sink_render)
use of gst_guint64_to_gdouble to be compliant with vs6
* gst/playback/gstdecodebin.c: (try_to_link_1)
* gst/videorate/videorate.c: (gst_video_rate_blank_data)
use of G_GINT64_CONSTANT for int64 constants
* win32/common/libgstinterfaces.def:
export some symbols (gst_mixer_get_type,gst_mixer_track_get_type)
* win32/vs6:
update and add new project files
Original commit message from CVS:
* gst/videorate/gstvideorate.c: (gst_video_rate_blank_data),
(gst_video_rate_chain):
Fix timestamping for videorate when the first buffer it sees has a
non-zero timestamp. Fix some misleading debug output.
