Link to properties. Correct titles for examples. Document a few trivial cases. Keep lists in section file and docs/plugins/Makefile.am alphabetically ordered.
Original commit message from CVS:
* gst/level/gstlevel.c: (gst_level_message_new):
Fix compilation (also known as the classic 'fix code that someone
committed without compiling it first').
Original commit message from CVS:
* gst/level/gstlevel.c:
Little renaming (l -> level).
* gst/spectrum/gstspectrum.c:
* gst/spectrum/gstspectrum.h:
Also send full timestamp/duration details here.
Original commit message from CVS:
* gst/level/gstlevel.c:
* gst/level/gstlevel.h:
Send same timestamp/duration details as videoanalysis. This gives
applications better chance to sync analysis results with playback.
Original commit message from CVS:
* gst/level/gstlevel.c:
Also support 32bit (e.g. whe having it after 'mad'). Add more notes
about whats needed for liboil acceleration. Simplify docs a bit.
Original commit message from CVS:
* configure.ac:
* gst/audiofx/audioamplify.c:
(gst_audio_amplify_clipping_method_get_type),
(gst_audio_amplify_init), (gst_audio_amplify_transform_ip):
* gst/audiofx/audiodynamic.c: (gst_audio_dynamic_init),
(gst_audio_dynamic_transform_ip):
* gst/audiofx/audioinvert.c: (gst_audio_invert_init),
(gst_audio_invert_transform_ip):
* gst/audiofx/audiopanorama.c: (gst_audio_panorama_init),
(gst_audio_panorama_transform):
* gst/level/gstlevel.c: (gst_level_init):
Make elements GST_BUFFER_FLAG_GAP aware and call
gst_base_transform_set_gap_aware for this.
Bump core requirement to CVS.
* gst/audiofx/audiochebyshevfreqband.c:
(gst_audio_chebyshev_freq_band_transform_ip):
* gst/audiofx/audiochebyshevfreqlimit.c:
(gst_audio_chebyshev_freq_limit_transform_ip):
Also sync GObject properties to the controller if operating
in passthrough mode.
Original commit message from CVS:
* gst/level/gstlevel.c: (gst_level_class_init), (gst_level_start),
(gst_level_transform_ip):
* gst/level/gstlevel.h:
Use basetransform segment so that it is correctly managed on flushes and
start/stop.
Report message timestamp as stream time, which is what an application
can understand.
Original commit message from CVS:
* gst/level/gstlevel.c: (gst_level_transform_ip):
Use guint8 * instead of gpointer then vs6 can build
in_data += (filter->width / 8).
Original commit message from CVS:
* gst/level/gstlevel.c: (gst_level_calculate_##TYPE),
(gst_level_transform_ip):
Use guint8 * instead of gpointer then vs6 know the size of data
pointed when moving the pointer.
* gst/rtp/gstrtph264pay.c: (gst_rtp_h264_pay_handle_buffer):
Move instructions after variables declaration.
* win32/vs6/autogen.dsp:
* win32/vs6/libgstrtp.dsp:
* win32/vs6/libgstrtsp.dsp:
Update vs6 project files.
Original commit message from CVS:
* gst/level/gstlevel.c: (gst_level_init), (gst_level_set_caps),
(gst_level_transform_ip):
* gst/level/gstlevel.h:
Use function pointer for process function and add process functions
for float audio.
Original commit message from CVS:
* gst/level/gstlevel.c: (gst_level_set_property):
* gst/level/gstlevel.h:
Fix type mixup in level->interval (gdouble<->guint64). Spotted by
René Stadler
Original commit message from CVS:
* gst/level/gstlevel.c: (gst_level_set_caps),(gst_level_transform_ip):
use G_GINT64_CONSTANT for INT64 constants
* gst/videofilter/gstvideobalance.c:
define rint for WIN32 #define rint(x) (floor((x)+0.5))
* win32/vs6/libgstavi.dsp:
add missing libraries for the link and remove avimux.c from
the project as it isn't ported to 0.10 yet
Original commit message from CVS:
* ext\jpeg\smokecodec.c:
use of GST_DEBUG instead of DEBUG(a...) for WIN32
* ext\speex\gstspeexenc.c: (gst_speexenc_set_header_on_caps):
move first instruction after all variables declarations
* gst\alpha\gstalpha.c:
* gst\effectv\gstshagadelic.c:
* gst\smpte\paint.c:
* gst\videofilter\gstvideobalance.c:
define M_PI if it's not defined (it's not defined on WIN32)
* gst\cutter\gstcutter.c: (gst_cutter_chain):
* gst\id3demux\id3v2frames.c: (parse_relative_volume_adjustment_two):
* gst\level\gstlevel.c: (gst_level_set_property), (gst_level_transform_ip):
* gst\matroska\matroska-demux.c: (gst_matroska_demux_parse_info),
(gst_matroska_demux_video_caps):
* gst\matroska\matroska-mux.c: (gst_matroska_mux_start), (gst_matroska_mux_finish):
* gst\wavparse\gstwavparse.c: (gst_wavparse_stream_data):
use gst_guint64_to_gdouble for conversions
* gst\goom\filters.c: (setPixelRGB_):
fix a debug which was using undefined variable
* gst\level\gstlevel.c: (gst_level_set_caps), (gst_level_transform_ip):
* gst\matroska\ebml-read.c: (gst_ebml_read_sint):
replace LL suffix with L suffix (LL isn't supported by MSVC6.0)
* win32/vs6:
add vs6 projects files for most of plugins-good
Original commit message from CVS:
2006-01-13 Thomas Vander Stichele <thomas at apestaart dot org>
patch by: Mike Smith
* gst/level/gstlevel.c: (gst_level_message_new),
(gst_level_message_append_channel):
Fix memleak. Fixes#326612
Original commit message from CVS:
* check/elements/level.c: (GST_START_TEST):
fix test for new GstClockTime use
* gst/level/gstlevel.c: (gst_level_init), (gst_level_set_caps),
(gst_level_transform_ip):
* gst/level/gstlevel.h:
fix up the decay peak, ensuring the decay peak is never lower
than the peak for that interval
Original commit message from CVS:
* common/c-to-xml.py:
* common/gtk-doc-plugins.mak:
a simple py script to generate valid xml from a C example
probably also need to strip an MIT license when we decide
* docs/plugins/Makefile.am:
* gst/level/Makefile.am:
* gst/level/gstlevel.c: (gst_level_init):
* gst/level/level-example.c: (message_handler), (main):
add an example to level that will show up in the docs
* gst/rtp/TODO:
add a note for the future
Original commit message from CVS:
Andrewio Patrickoforus Wingonymus - 5 additional tests for your sins
Add a regression test for level and fix a casting bug that made the additional
channels turn out wrong
Original commit message from CVS:
2005-08-28 Andy Wingo <wingo@pobox.com>
* Updates for two-arg init from GST_BOILERPLATE.
* ext/ladspa/gstsignalprocessor.c (gst_signal_processor_init): Use
the second arg for the class, because G_OBJECT_GET_CLASS (self)
returns the wrong thing.
(gst_signal_processor_add_pad_from_template): Make pads of the
right type.
* ext/ladspa/gstladspa.c (gst_ladspa_class_get_param_spec): Make
writable param specs G_PARAM_CONSTRUCT so default values work.
(gst_ladspa_init): Use the second arg for the class.
