Commit graph

1138 commits

Author SHA1 Message Date
Wim Taymans
25067558dc stepping: more stepping improvements
Update design doc with step-start docs.
Add eos field to step done message
when stepping in reverse, update the segment time field.
Flush out the current step when we are flushing.
2009-06-12 13:20:36 +02:00
Wim Taymans
23b772664b basesink: post step-start
when we clip, also stop the stepping.
Don't do QoS when stepping
Post step-start when queueing and activating the step.
2009-06-12 13:16:29 +02:00
Wim Taymans
6e633cbe33 basesink: update segment start/stop for clipping
When we start stepping, store the start/stop values of the segment before we
install new start/stop values for clipping in non-flushing steps.

for non-flushing steps, update the element start time. For flushing steps, it
does not change because running_time does not advance

Make sure we always perform the stop_stepping operations even when we drop
frames.
2009-06-09 12:06:35 +02:00
Wim Taymans
72e8d9909c basesink: do proper clipping in stepping
Update the stop position of the segment so that we clip correctly.
After clipping in non-flushing mode, rerender the remainder of the buffer.
2009-06-09 10:25:34 +02:00
Wim Taymans
89c42f8506 stepping: do flushing steps correctly
Note in the docs that a flushing step in PLAYING brings the pipeline to the lost
state and skips the data before prerolling again.

Implement the flushing step correctly by invalidating the current step
operation, which would activate the new step operation.
2009-06-08 17:41:56 +02:00
Jan Schmidt
f0f9ed875f basesink: Change awkward wording in a translateable message. 2009-06-08 16:16:27 +01:00
Wim Taymans
a4c6d04b4c basesink: add non-flushing steps
Add support for non-flushing steps and with different rates.
Clear step info when flushing
2009-06-08 16:27:36 +02:00
Mark Nauwelaerts
4bb3702886 basesrc: reply to QUERY_SEEKING with original format. Fixes #584838. 2009-06-05 16:01:27 +02:00
Wim Taymans
fa7db7d247 basesink: fix clipped start/stop after step
Use the segment helpers to get a more accurate clipped start/stop position after
a stepping operation ended.
2009-06-04 17:27:03 +02:00
Wim Taymans
957e40343d basesink: use more correct segment methods
Use the more correct new segment methods for updating the segment before and
after a step.
2009-06-04 12:53:23 +02:00
Wim Taymans
a907f8d145 basesink; handle EOS correctly.
Handle EOS and buffers without a timestamp gracefully.
Remove a warning that is not so much a warning now anymore.
2009-06-03 15:39:13 +02:00
Wim Taymans
c811d51471 basesink: forget previous times when stepping
When we start a flushing step operation, forget about the previous stream time
so that the position reporting works correctly.
2009-06-03 10:39:53 +02:00
Wim Taymans
71a5ebe638 basesink: fix regression in unit tests
Store the timestamp of the buffer after prerolling. While we are prerolled we
want to report the position of the segment start value.
2009-06-02 15:37:22 +02:00
Wim Taymans
484d188440 basesink: post a warning on excessive framedrops
When we go into emergency rendering, post a warning informing the user about
this fact.
2009-06-01 19:37:14 +02:00
Wim Taymans
5479772bec basesink: more stepping in reverse
Fix stepping and position reporting in reverse playback.
2009-06-01 13:37:29 +02:00
Wim Taymans
8c54c70d9c basesink: use start_time as the step start
Use the start_time of the element as the point from where the step operation
starts. This fixes stepping in all paused states.
2009-06-01 13:37:29 +02:00
Wim Taymans
642bb32196 basesink: catch step cases in _wait_preroll()
When a subclass is blocking in _wait_preroll() in the _render method, make sure
we can unlock the subclass and detect this return value from the render method.
2009-06-01 13:37:29 +02:00
Wim Taymans
1caab05238 basesink: more stepping in reverse fixes 2009-06-01 13:37:28 +02:00
Wim Taymans
4be27fa555 basesink: small cleanups 2009-06-01 13:37:28 +02:00
Wim Taymans
0c205b96b4 framestep: implement backwards framestep
Update framestep document, we want to pass the flush flag in the step-done
message.

Add flush flag to the gstmessage.

Update examples to use the new step-done message api.

Implement framestep with playback rates < 0.0 too.
2009-06-01 13:37:28 +02:00
Wim Taymans
1839782379 basesink: add framestepping in time 2009-06-01 13:37:28 +02:00
Wim Taymans
7a7e9629ce basesink: keep track of stepped time
Pass running_time around so that the stepping code can calculate the elapsed
time correctly.
2009-06-01 13:37:27 +02:00
Wim Taymans
f07b86f18b basesink: move stuff around, more stepping
Make start and stop_stepping methods and move their invocation in the right
places.

Perform the atual stepping operation where we have full context about the
timestamps.
2009-06-01 13:37:27 +02:00
Wim Taymans
546c959f26 basesink: first stab at frame stepping in PAUSED
Unlock the prerolled frame and recheck if we need to step.
Keep a simple counter for the frames we're about to skip while stepping and
preroll/post step_done when stepping finished.
2009-06-01 13:37:26 +02:00
Arnout Vandecappelle
c74c3bf1b3 adapter: fix _masked_scan_uint32() at boundaries
gst_adapter_masked_scan_uint32 could return values smaller than offset
if the first byte(s) of the mask are 0 and the pattern matches the
beginning of the adapter.
Added examples to documentation of gst_adapter_masked_scan_uint32().
Also added some more masked boundary tests.
Fixes #584118
2009-05-28 22:02:21 +02:00
Stefan Kost
04ece69838 controller: add G_LIKELY and join two if for same condition
A G_LIKELY for the sequence!=NULL checks. Join two ifs to an if-else. Add
indent guides to keep indent form breaking the function declaration
2009-05-22 14:21:39 +03:00
Edward Hervey
d72c17e328 gsttypefindhelper: Fix indentation 2009-05-22 12:57:10 +02:00
Jan Schmidt
2437a08666 controller: Silence a warning from the GSequence being NULL.
Fix a warning that occurs when the self->priv->values is NULL and
the code tries to retrieve an iterator from it. The warning was showing
up in the checks for the volume element.
2009-05-22 09:43:02 +01:00
Wim Taymans
72232cfef1 adapter: improve the flush function
Remove a compare and branch from flush.
2009-05-20 22:20:46 +02:00
Stefan Kost
6784355d52 controller: fix assertion when freeing the control source 2009-05-20 17:33:18 +03:00
Wim Taymans
fd76e4fc93 adapter: potentially save a memcpy in _take
Directly use the assembled_data in _take() functions when we can instead of
copying it out.
2009-05-20 12:48:41 +02:00
Wim Taymans
f3ff7ad055 adapter: micro optimisations 2009-05-20 11:36:11 +02:00
Wim Taymans
49c4e367e9 adapter: avoid comparisions in fast path
Small tweaks to reduce the number of useless compares in loops.
2009-05-20 11:12:43 +02:00
Wim Taymans
9197f4399b adapter: avoid branch in copy code 2009-05-20 10:28:45 +02:00
Wim Taymans
270723c85c adapter: add _masked_scan_uint32
Add a reasonably optimized new gst_adapter_masked_scan_uint32() function
to scan the adapter for a pattern after applying a mask.

Add some unit tests.

API: GstAdapter::gst_adapter_masked_scan_uint32()

Fixes #583187
2009-05-20 00:37:53 +02:00
Wim Taymans
d6b21ba529 adapter: more optimisations
Remove duplicate copy code (_peek_into and _copy) and make a unified
optimized copy function.
2009-05-19 22:13:04 +02:00
Sebastian Dröge
10743802be controller: Use ordered GSequence instead of GList
This makes lookups and insertions O(log n) instead of
always O(n) for insertions and O(n) in worst case for
lookups.

Fixes bug #582564.
2009-05-14 22:13:47 +02:00
Wim Taymans
b23279e922 adapter: don't use realloc, it does a memcpy
Don't use realloc to grow the scratch area because we don't want the memcpy the
old useless data into the new area before we write our new stuff in it.
2009-05-13 23:52:02 +02:00
Wim Taymans
cc7985ab48 adapter: use g_realloc for resizing the buffer
Use g_realloc for resizing the internal buffer instead of a
less fancy _free/_malloc pair.
2009-05-13 22:51:18 +02:00
Wim Taymans
bb013081a4 adapter: move new member to private struct
Move the new members to a private struct because we don't have enough padding
anymore on 32-bits platforms.
2009-05-13 21:35:23 +02:00
Wim Taymans
763a6f6761 adapter: update some docs 2009-05-13 18:50:23 +02:00
Wim Taymans
3d19b75147 adapter: add method to keep track of timestamps
Keep track of the timestamp and offset associated with the current head of the
adapter.

API: GstAdapter::gst_adapter_prev_timestamp()
2009-05-13 16:22:58 +02:00
Wim Taymans
8ceff30ca9 adapter: small cleanups 2009-05-13 16:20:26 +02:00
Wim Taymans
605639a2bf adapter: optimize taking the headbuffer
When a are requested to take a buffer from the adapter that is exactly the
headbuffer, don't make a subbuffer of it but return that head buffer.

Add a unit-test for this new optimisation.
2009-05-12 10:25:40 +02:00
Wim Taymans
50bcf96ffe basesrc: don't ignore pad_start return value 2009-05-11 23:06:39 +02:00
Stefan Kost
e778c5fd8b logging: fix unused variable warning when disabling debug logs.
The var was NULL anyway, bacause of the ifdefs there, the message makes no
sense including it.
2009-04-15 23:35:35 +03:00
Stefan Kost
dd3c9ab6b6 controller: factor out duplicated code and add a description for it.
Also fix typo in the tests while reviewing them.
2009-04-14 22:08:56 +03:00
Edward Hervey
9e4fa43657 basesink: Remove dead assignments.
sstart/sstop/rstart/rstop are all either:
* assigned values later on before being used in 'do_times:' (EOS and buffers)
* not used (non-EOS events)
2009-04-04 14:39:51 +02:00
Edward Hervey
ec3cd5d438 basesrc: remove dead assignment.
The variable will not be read before it's assigned a value line 942/945
2009-04-04 14:38:52 +02:00
Sebastian Dröge
d12034ab4b gst: Use g_once_init* or G_DEFINE_TYPE 2009-04-04 10:59:39 +02:00