Stefan Sauer
12930c2f8c
docs: fix "Symbol name not found at the start of the comment block"
...
Add symbols or change comment into a regular comment.
2015-07-07 17:12:02 +02:00
Luis de Bethencourt
063f553275
docs: decodebin2 -> decodebin
2015-06-25 10:57:29 +01:00
Jan Schmidt
e5db2673bd
matroska-demux: Use gst_video_multiview_guess_half_aspect()
...
Use the gst_video_multiview_guess_half_aspect() utility function
to set the half-aspect flag (or not) on stereoscopic frame-packed
videos.
2015-06-23 11:58:41 +10:00
Vineeth TM
9a1ed36b7a
matroska: remove useless check
...
No need to check for context availability while freeing. We are inside
inside a code block with a condition that dereferences context.
if (context->type == 0 ...
https://bugzilla.gnome.org/show_bug.cgi?id=751306
2015-06-22 12:26:23 +01:00
Vineeth T M
e97df1e097
lzo: fix memory leak
...
the opened file is not being closed during test, which will result
in memory leak.
https://bugzilla.gnome.org/show_bug.cgi?id=751306
2015-06-22 12:22:06 +01:00
Jan Schmidt
0c46c5c3e2
matroska-demux: Actually set detected 3D info into output caps.
...
Use the information read from the StereoMode info
to configure multiview-mode and multiview-flags in the
video caps.
2015-06-12 01:57:36 +10:00
Jan Schmidt
ec5bc9dccb
matroska: Implement basic stereoscopic video support
...
Implement support for the packed video formats WebM
uses, not all the values that Matroska might use.
In practice, it's really hard to find any samples in the
wild of any.
Supported in both the muxer and demuxer.
2015-06-11 12:11:42 +10:00
Luis de Bethencourt
6d06a74f7f
matroska: overwritten value assignment
...
curpos is set and immediately after, set again. Remove the redundant
assignment.
https://bugzilla.gnome.org/show_bug.cgi?id=749909
2015-05-27 16:56:15 +01:00
Luis de Bethencourt
06d1ae313d
matroska: remove unused property enum items
2015-04-30 15:43:09 +01:00
Guillaume Desmottes
7f4f4131df
matroskademux: fix seek event leak
...
gst_matroska_demux_handle_seek_event() doesn't consume the
event so we have to unref it.
https://bugzilla.gnome.org/show_bug.cgi?id=748584
2015-04-28 19:24:40 +01:00
Sebastian Dröge
9119fbd774
matroska-demux: Send pending tags when adding a new pad
...
We might've parsed those tags before already and tried to push them to
non-existing pads before. Now let's do it for real.
2015-04-28 15:42:49 +02:00
Luis de Bethencourt
9391622579
Rename property enums from ARG_ to PROP_
...
Property enum items should be named PROP_ for consistency and readability.
2015-04-27 11:22:11 +01:00
Tim-Philipp Müller
d753a3eeb1
Remove obsolete Android build cruft
...
This is not needed any longer.
2015-04-26 17:55:07 +01:00
Guillaume Desmottes
592cab1512
matroska: fix GValue leaks when parsing tags
...
gst_tag_list_add_value() doesn't consume the GValue we pass to it so there is
no point copying it.
https://bugzilla.gnome.org/show_bug.cgi?id=746810
2015-03-30 08:59:36 -03:00
Mark Nauwelaerts
593cfa086c
matroskademux: resurrect some flow return handling
...
https://bugzilla.gnome.org/show_bug.cgi?id=744572
2015-03-29 13:58:56 +02:00
Thiago Santos
d56b11af56
matroska: store stream tags and push as updated
...
New tags can be found on different parts of the file, so this patch
keeps the stream taglists around for the life cycle of the pad
and adds those new tags as found. Then a new tag is found, the
pad's is marked with a tags changed flag, making the element push
a new tag event on the next check. Before this, we were sending
only the newly found tags, as the element was losing its taglist
when pushing the event.
2015-03-28 11:20:39 -03:00
Ramiro Polla
7b2b619a8f
matroskademux: send global tags incrementally
...
Instead of sending only new tags once they are found, merge the taglist
and send them incrementally.
2015-03-28 10:24:57 -03:00
Ramiro Polla
af45021036
matroskaparse: send global tags
...
Global tags are already being read in matroskaparse, but they are not
currently being sent.
This patch makes global tags get sent incrementally whenever new ones
are found.
https://bugzilla.gnome.org/show_bug.cgi?id=746242
2015-03-28 10:24:57 -03:00
Nicola Murino
bb3d82ef04
matroskademux: for dts only stream set pts=dts for intra only formats
...
https://bugzilla.gnome.org/show_bug.cgi?id=745192
2015-03-15 14:28:36 +00:00
Ramiro Polla
0fad053497
matroskademux: fix sending of tags
...
* Fix critical when new tags are found after segment event has already
been sent.
* Send global tags before stream tags.
* Split sending of tags out of gst_matroska_demux_send_event() into its
own function.
https://bugzilla.gnome.org/show_bug.cgi?id=745973
2015-03-14 18:17:48 +00:00
Luis de Bethencourt
db3ade5bfb
matroska: error mode if can't push buffer
...
If gst_pad_push() fails, inform and return flow error.
2015-03-09 12:51:21 +00:00
Luis de Bethencourt
f494da89b4
matroska: unused value
...
Value set in ret will be overwritten just before exiting the function.
CID #1226469
2015-03-09 12:13:40 +00:00
Nicola Murino
c4e542de69
matroskamux: Remove duration accumulation logic
...
Duration accumulation can cause rounding errors and generate wrong
duration with different buffers that share the same timestamp.
https://bugzilla.gnome.org/show_bug.cgi?id=745192
2015-03-04 11:37:48 +01:00
Nicola Murino
f727762c1f
matroska: Add an helper method to get buffer timestamps
...
... and replace GST_BUFFER_TIMESTAMP that always return PTS with this method
that return PTS or DTS based on stream type.
https://bugzilla.gnome.org/show_bug.cgi?id=745192
2015-03-04 11:36:24 +01:00
Nicola Murino
e676b8ba9c
matroskamux/demux: initialize dts_only
...
https://bugzilla.gnome.org/show_bug.cgi?id=745192
2015-02-27 09:56:06 +02:00
Nicola Murino
09b8f0efc3
matroskamux: store DTS for V_MS/VFW/FOURCC streams
...
https://bugzilla.gnome.org/show_bug.cgi?id=745192
2015-02-27 09:56:06 +02:00
Matej Knopp
fa283f407f
matroskademux: V_MS/VFW/FOURCC streams have DTS instead of PTS
...
When such stream is present demuxer should set DTS on buffers instead
of PTS. This is consistent with how VLC and libav/ffmpeg handle VFW
streams.
Sample file
https://s3.amazonaws.com/MatejK/Samples/Matroska-VFW-DTS-Only.mkv
https://bugzilla.gnome.org/show_bug.cgi?id=745192
2015-02-26 11:12:34 +02:00
Thiago Santos
7772a25fdc
matroskamux: store and write stream tags
...
Separate global from stream tags storage and write them to the
appropriate tags entry in the output
2015-02-02 20:07:13 -03:00
Jan Schmidt
4a77c8a84f
matroska: Fix seeking past the end of the file in reverse mode.
...
Snap to the end of the file when seeking past the end in reverse mode,
and also fix GST_SEEK_TYPE_END and GST_SEEK_TYPE_NONE handling
for the stop position by always seeking on a segment in stream time
2015-01-31 06:15:44 +11:00
Luis de Bethencourt
1e15808563
matroskademux: remove unnecessary check
...
No matter if gst_matroska_read_common_parse_index_cuetrack () returns that the
flow is OK or not, the check there will be a break from the switch. Removing the
check since the outcome is the same.
CID #1265762
2015-01-23 17:35:51 +00:00
Edward Hervey
932b32bb6e
matroskamux: Avoid using freed variable
...
the name variable might have been attributed to pad_name, make sure we
free it only *after* pad_name has been used.
Coverity CID : 1265774
2015-01-23 15:16:25 +01:00
Edward Hervey
9fa85f72e1
matroska: Avoid debugging below category threshold
...
This part alone was what made the matroska thread take a full core
on an android phone ...
2015-01-21 15:26:41 +01:00
Sebastian Dröge
67d4b85d6a
matroskademux: Improve detection of being stuck at the same offset
...
Only error out if we read from the same position again and got the
same length. Just the same position is not necessarily enough.
2014-12-29 15:35:19 +01:00
Sebastian Dröge
e596a3b6a7
matroskademux: Don't get stuck at the same offset when searching for clusters
...
This could happen if there is an invalid cluster with size 0, and in that
case just error out instead of looping forever.
2014-12-29 15:02:52 +01:00
Edward Hervey
cbe56d2331
matroska-demux: Cache upstream length
...
Instead of constantly querying upstream, just cache the last duration,
and in the unlikelyness we might have gone over query again before
deciding we are EOS.
Cut 15% cpu off matroskademux streaming thread (srsly...)
2014-12-19 10:59:18 +01:00
Vincent Penquerc'h
b7413279d9
matroska: mux/demux the OpusHead header
...
This is meant to be so (https://wiki.xiph.org/MatroskaOpus - while
it is marked as a draft, this part was confirmed to be correct on
IRC), and allows one to determine whether a demuxed stream is
multistream or not, and thus set the multistream caps field
accordingly. In turn, this means downstream does not have to guess.
https://bugzilla.gnome.org/show_bug.cgi?id=740744
2014-12-18 11:38:49 +00:00
Nicola Murino
c466ff4748
matroskademux: set framerate 0/1 when duration is not known
...
https://bugzilla.gnome.org/show_bug.cgi?id=740130
2014-12-04 18:20:37 +01:00
Sebastian Dröge
7a909917b5
matroska-mux: Use G_DEFINE_TYPE() to register the pad instead of manually registering it
2014-11-09 11:04:33 +01:00
Göran Jönsson
ec05d3b6d8
matroskamux: make GstMatroskamuxPad get_type() function thread-safe
...
https://bugzilla.gnome.org/show_bug.cgi?id=739722
2014-11-07 21:20:31 +00:00
Tim-Philipp Müller
85c3c36712
matroskamux: tweak writing app tag string a little
2014-11-02 19:02:35 +00:00
Jonas Holmberg
1371fa0c61
matroskademux: make demuxer reusable
...
Remove pads from flow combiner and reset last
flow return to FLOW_OK by resetting the flow combiner.
This prevents FLOW_FLUSHING when trying to re-use the
demuxer after setting it back to NULL/READY state.
https://bugzilla.gnome.org/show_bug.cgi?id=737359
2014-09-25 16:14:18 +01:00
Sanjay NM
26a1344f37
Miscellaneous minor cleanups
...
Fix redundant variables and assignments,
and unreachable breaks.
https://bugzilla.gnome.org/show_bug.cgi?id=736875
https://bugzilla.gnome.org/show_bug.cgi?id=736876
https://bugzilla.gnome.org/show_bug.cgi?id=736879
https://bugzilla.gnome.org/show_bug.cgi?id=736880
https://bugzilla.gnome.org/show_bug.cgi?id=736881
https://bugzilla.gnome.org/show_bug.cgi?id=736888
https://bugzilla.gnome.org/show_bug.cgi?id=736890
https://bugzilla.gnome.org/show_bug.cgi?id=736892
https://bugzilla.gnome.org/show_bug.cgi?id=736893
https://bugzilla.gnome.org/show_bug.cgi?id=736894
2014-09-24 00:45:31 +01:00
Anuj Jaiswal
4242495ea7
matroskamux: don't bitwise OR the same flag twice
...
https://bugzilla.gnome.org//show_bug.cgi?id=736543
2014-09-12 10:37:31 +01:00
Tim-Philipp Müller
4c08f2694d
matroskademux: handle real audio 28_8
...
Fixes duplicate check for 14_4.
https://bugzilla.gnome.org//show_bug.cgi?id=736543
2014-09-12 10:35:36 +01:00
Sebastian Dröge
a3a5530518
matroska-demux: Don't handle parse errors at the end of file as an error
...
But only if they happen after the Matroska segment.
https://bugzilla.gnome.org/show_bug.cgi?id=735833
2014-09-05 11:36:30 +03:00
Jan Schmidt
f1c3a40547
matroska: Use gst_video_guess_framerate() function
...
Remove local framerate guessing function in favour of
the new gst_video_guess_framerate() function.
2014-08-15 01:17:27 +10:00
Vincent Penquerc'h
5653b1a25a
matroskademux: send gap events instead of segment tricks
...
This fixes missing frames from being time skipped.
https://bugzilla.gnome.org/show_bug.cgi?id=732372
2014-07-01 15:14:34 +01:00
Sebastian Dröge
5500dd4a20
matroskamux: Fix compiler warnings when compiling with G_DISABLE_ASSERT
2014-06-29 19:57:57 +02:00
Tim-Philipp Müller
155a3fec93
matroskaparse: don't error out if there's not enough data in the adapter
...
gst_matroska_parse_take() would return FLOW_ERROR instead of
FLOW_EOS in case there's less data in the adapter than requested,
because buffer is NULL in that case which triggers the error
code path. This made the unit test fail (occasionally at least,
because of a bug in the unit test there's a race and it would
happen only sporadically).
2014-06-28 17:39:36 +01:00
Sebastian Dröge
daf25482ed
matroskademux: Don't call GST_DEBUG_OBJECT() and other macros with non-GObject objects
...
It will crash with latest GLib GIT and was never supposed to work before
either.
2014-06-22 19:26:03 +02:00