Commit graph

151 commits

Author SHA1 Message Date
He Junyan
242401915f av1parse: Correct the pts for frames and OBUs inside a TU.
When the output alignment is smaller than the input alignment, for
example, When the output alignment is "FRAME" and the parse is likely
connecting to a decoder, the current PTS setting for AV1 frames inside
a TU is not very correct.

For example, a TU may begin with non-displayed frames and end with a
displayed frame. The current way will assign the PTS to the first
non-displayed frame, which is a decode-only frame and the PTS will be
discarded in the video decoder. While the last displayed frame has
invalid PTS, and so the video decoder needs to guess its PTS based on
the frame rate and previous frame's PTS. This is not a decent and
robust way. And more important, when the previous frames provide DTS,
the video decoder will also guess the PTS based on the previous frames'
DTS and trigger the warning like:

  gstvideodecoder.c:3147:gst_video_decoder_prepare_finish_frame: \
  <vavp9dec0> decreasing timestame

It sets the reordered_output and makes the decoder in free run mode.

We should correct the PTS for a TU, let the non-displayed frames have
no PTS while set the correct PTS to the displayed one. Also, when the
AV1 stream has multi spatial layers, there are more than one displayed
frames inside one TU with the same PTS.

Note: If the input alignment is not TU aligned, we can not know the
exact PTS of this TU, and so we just clear the PTS of the decode only
frame and leave others unchanged.

We also correct all the PTS if the output is OBU aligned. All their
PTS and DTS are set to the input buffer's PTS.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3182>
2022-10-21 11:16:13 +00:00
He Junyan
a1f352196f av1parse: Only check the TU bound when the alignment is TU.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3182>
2022-10-21 11:16:13 +00:00
He Junyan
ee5d7ce075 av1parse: push all data once when input alignment not smaller than output.
When the incoming data has big alignment than the output, we do not need to
call finish_frame() and exit the current handle_frame() for each splitted
frame. We can push them all at one shot with in one handle_frame(), whcih
may improve the performance and can help us to find the edge of TU.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3182>
2022-10-21 11:16:13 +00:00
He Junyan
b7d3a219ab av1parse: Set the output buffer flags correctly.
The current code forgets to clear some flags and has some typo.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3182>
2022-10-21 11:16:13 +00:00
Mathieu Duponchelle
11c74ccec6 fake{video|audio}sink: don't proxy properties at instance init.
Instead proxy properties from the GstBaseSink class at class_init time,
and duplicate the rest of the fakesink properties manually.

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1442

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3073>
2022-10-19 09:12:11 +00:00
Arun Raghavan
34ca46c786 rtmp2sink: Correctly return GST_FLOW_ERROR on error
If there is an error while connecting, the streaming task will be stopped, and
is_running() will be false, causing a GST_FLOW_FLUSHING to be returned. Instead,
we perform the error check (!self->connection) first, to return an error if
that's what occured.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3189>
2022-10-15 08:21:40 +00:00
He Junyan
11436be268 vp9parse: The show_existing_frame buffer should not be decode only.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3155>
2022-10-13 06:41:06 +00:00
He Junyan
eac9c33cc1 vp9parse: Correct the pts for frames inside a super frame.
When the alignment is "FRAME" and the parse is likely connecting to
a decoder, the current PTS setting for VP9 frames inside a super
frame is not very correct.

For example, the super frame may begin with non-displayed frames and
end with a displayed frame. The current way will assign the PTS to
the first non-displayed frame, which is a decode-only frame and the
PTS will be discarded in the video decoder. While the last displayed
frame has invalid PTS, and so the video decoder needs to guess its
PTS based on the frame rate and previous frame's PTS. This is not a
decent and robust way. And more important, when the previous frames
provide DTS, the video decoder will also guess the PTS based on the
previous frames' DTS and trigger the warning like:

  gstvideodecoder.c:3147:gst_video_decoder_prepare_finish_frame: \
  <vavp9dec0> decreasing timestame

It sets the reordered_output and makes the decoder in free run mode.

We should correct the PTS for a super frame, let the non-displayed
frames have no PTS while set the correct PTS to the displayed one.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3155>
2022-10-13 06:41:06 +00:00
Edward Hervey
3215136d67 mxfdemux: Add support for Canon XF-HEVC
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1495

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3163>
2022-10-12 09:15:57 +00:00
Edward Hervey
9ca306d22c mxfdemux: Don't leak index table segments on failures
The segment was freed ... but not the contents :)

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3163>
2022-10-12 09:15:57 +00:00
Thibault Saunier
bf964f896f transcodebin: Implement support for upstream stream selection
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3128>
2022-10-06 09:14:41 -03:00
Sebastian Dröge
a2d121cf9a gaussblur: Fix memory leak when setting caps multiple times
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3091>
2022-09-29 22:34:37 +00:00
Mart Raudsepp
8a2edc6581 tsdemux: Don't trigger a program change when falling back to ignore-pcr behaviour
Since commit a79a756b79 we could change to ignore-pcr automatically at 500ms
into a live stream when no PCR is seen by then. However the stream counting in
program change detection was wrongly considering ignore-pcr programs to have a
separate PCR PID, even though we are actually ignoring the PCR PID completely,
resulting in an erroneous program switch getting triggered from the different
stream count. This in turn would send an EOS and switch out the pads for what
actually is still the same program, while we intended to simply apply a
workaround for broken encoders.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3060>
2022-09-28 07:18:45 +00:00
Seungha Yang
a45273aaeb codectimestamper: Update document
Add more description about those elements

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3021>
2022-09-16 18:06:58 +00:00
Seungha Yang
4db55bc759 codectimestamper: Fix for unknown framerate
Use default framerate if numerator or denominator is unknown

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3031>
2022-09-15 21:48:30 +00:00
Seungha Yang
6a8a20ff92 Add H.264/H.265 timestamp correction element
Adding {h264,h265}timestamper element to correct timestamp of
encoded frames. This initial version supports only DTS
correction based on given PTS and SPS data.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2580>
2022-09-12 19:02:21 +00:00
Thibault Saunier
64010bb1f8 testsrcbin: Add a way to specify caps for the output of the sources
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3007>
2022-09-09 15:25:45 +00:00
Thibault Saunier
19e33a6c5e testsrcbin: Plug some leaks
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3007>
2022-09-09 15:25:45 +00:00
Thibault Saunier
7f34b5610f testsrcbin: Add an 'expose-sources-async' property
Which allows simluating usual source which require decoding etc in decodebin for example

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3007>
2022-09-09 15:25:45 +00:00
Thibault Saunier
6a4425e46a meson: Call pkgconfig.generate in the loop where we declare plugins dependencies
Removing some copy pasted code

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2970>
2022-09-01 21:17:35 +00:00
Seungha Yang
3632e97df2 mxfdemux: Always calculate BlockAlign of raw audio
Workaround for nBlockAlign and nBitsPerSample mismatch. Always
use the formula described in the specification for BlockAlign value

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2864>
2022-08-12 19:26:08 +00:00
Nirbheek Chauhan
5da9f62313 rtsp+rtmp: Forward warning added to tls-validation-flags to our users
With the 2.72 release, glib-networking developers have decided that
TLS certificate validation cannot be implemented correctly by them, so
they've deprecated it.

In a nutshell: a cert can have several validation errors, but there
are no guarantees that the TLS backend will return all those errors,
and things are made even more complicated by the fact that the list of
errors might refer to certs that are added for backwards-compat and
won't actually be used by the TLS library.

Our best option is to ignore the deprecation and pass the warning onto
users so they can make an appropriate security decision regarding
this.

We can't deprecate the tls-validation-flags property because it is
very useful when connecting to RTSP cameras that will never get
updates to fix certificate errors.

Relevant upstream merge requests / issues:

https://gitlab.gnome.org/GNOME/glib/-/merge_requests/2214

https://gitlab.gnome.org/GNOME/glib-networking/-/issues/179

https://gitlab.gnome.org/GNOME/glib-networking/-/merge_requests/193

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2494>
2022-07-30 11:27:12 +00:00
Benjamin Gaignard
a275e1e029 videoparsers: h265: Be less restrictive between PPS and SPS parsing order
Allow to parse PPS to be parser even if SPS hasn't been parsered before.
This help to parse VPSSPSPPS_A_MainConcept_1 conformance test

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2575>
2022-07-22 16:13:47 -04:00
Sebastian Dröge
0aad12fbce audiobuffersplit: Actually store number of samples to drop in gapless mode
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2780>
2022-07-22 08:01:45 +00:00
Sebastian Dröge
fad0a72eca audiobuffersplit: Use input running time for comparison instead of the currently tracked running time
Otherwise gapless mode would do completely wrong calculations on
discontinuities and cause input/output to drift slowly.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2780>
2022-07-22 08:01:45 +00:00
Sebastian Dröge
0485c354d2 audiobuffersplit: Combine two if expressions to reduce indentation
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2780>
2022-07-22 08:01:45 +00:00
Seungha Yang
8aeb8ea58f proxysink: Fix GstProxySrc leak
Clear weak pointer to peer src when disposing.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1552>
2022-07-07 05:54:54 +09:00
Seungha Yang
37fdaaf8ff proxysink: Make sure stream-start and caps events are forwarded
There might be a sequence of event and buffer flow:
- Got stream-start/caps/segment events
- Got flush events
- And then buffers with a new segment event

In the above case, stream-start and caps event might not be reached to
peer proxysrc if peer proxysrc is not ready to receive them.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1552>
2022-07-07 05:42:21 +09:00
Víctor Manuel Jáquez Leal
56f9359136 jpegparse: Add YUV440 sampling support.
Found some samples with this sampling, so in order to support it,
JPEG2000 header cannot be used anymore, a this patch also adds the
enums for each supported colorspace and sampling, avoiding hacks.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2641>
2022-06-22 18:44:11 +00:00
He Junyan
f0d4135b3a h265parse: Fix uninitialized width and height when update src caps.
The commit b90d0274 introduces uninitialized width and height when we
consider to change the "pixel-aspect-ratio" for some interlaced stream.
We need to check the resolution in the src caps, and if no resolution
info found, there is no need to consider the aspect ratio.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2630>
2022-06-21 15:47:45 +00:00
Vivia Nikolaidou
b90d02741e avviddec, video.c, h265parse: Workaround for broken field-based interlaced encoders
Some encoders (e.g. Makito) have H265 field-based interlacing, but then
also specify an 1:2 pixel aspect ratio. That makes it kind-of work with
decoders that don't properly support field-based decoding, but makes us
end up with the wrong aspect ratio if we implement everything properly.
As a workaround, detect 1:2 pixel aspect ratio for field-based
interlacing, and check if making that 1:1 would make the new display
aspect ratio common. In that case, we override it with 1:1.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2577>
2022-06-16 10:03:02 +00:00
Seungha Yang
a1b4c62b35 h264parse: Use newly added avcC data parsing API
Use gst_h264_parser_parse_decoder_config_record() method to parse
codec_data.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2449>
2022-06-15 19:58:59 +00:00
Tim-Philipp Müller
9d9e59622f Bump GLib requirement to >= 2.62
Can't require 2.64 yet because of
https://gitlab.freedesktop.org/gstreamer/cerbero/-/issues/323

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2568>
2022-06-10 06:01:41 +00:00
Jan Alexander Steffens (heftig)
5ebc9427d9 rtmp2: Fix allocation of GstRtmpMeta
Use the right size.

On 64-bit platforms, `GstMetaInfo` is larger than `GstRtmpMeta`, which
masked this bug. On 32-bit platforms, it causes crashes. Thanks to
@maxatka for discovering this.

Fixes: https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/issues/1721
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2553>
2022-06-06 15:51:07 +00:00
Marc Leeman
955adc4564 rfbsrc: add uri interface
Adding a uri interface enables plugging in RFB/VNC sources to anything
that makes use of uridecodebin:

gst-play-1.0 rfb://:password@10.40.216.180:5903?shared=1

Use userinfo to pass user (ignored) and password, other key/value pairs
can be encoded in the query part of the URI (see shared)

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1963>
2022-06-03 19:44:28 +00:00
Andoni Morales Alastruey
77937f9398 videoparse: rename from _free to _clear
The function does not free the structure but the data
contained within.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1458>
2022-06-03 08:29:05 +00:00
Andoni Morales Alastruey
ca2eb9f65f h264parse: add support Precision Time Stamp in SEI messages
Expose User Data Unregistered as a new Meta and add
API to parse Precision Time Stamp (ST 0604).

Fixes #927

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1458>
2022-06-03 08:29:05 +00:00
Víctor Manuel Jáquez Leal
5542dd395d jpegparse: Rewrite element.
Now it uses the JPEG parser in libgstcodecparsers, while the whole
code is simplified by relying more in baseparser class for tag
handling.

The element now signals chroma-format and default framerate is 0/1,
which is for still-images.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1473>
2022-05-20 08:51:23 +00:00
Víctor Manuel Jáquez Leal
17046fc1ad jpegformat: Use codecparsers' for JPEG markers.
Instead of repeating JPEG markers definition, this patch uses those
defined in gstcodecparsers library.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1473>
2022-05-20 08:51:23 +00:00
Víctor Manuel Jáquez Leal
547d324325 jpegparse: Headers cleanup
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1473>
2022-05-20 08:51:23 +00:00
Sebastian Dröge
bf79a6908c tsmux: Make sure to set srcpad caps under all conditions before outputting the first buffer
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1218

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2438>
2022-05-18 12:19:07 +00:00
Sebastian Dröge
3487c81ac2 sdpdemux: Release request pads from rtpbin when freeing a stream
Otherwise the pads of the rtpbin stay around forever and are leaked.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2437>
2022-05-17 12:36:44 +00:00
Edward Hervey
7ac4dd3d9d mxfdemux: Handle files produced by legacy FFmpeg
Until March 2022, the FFmpeg MXF muxer would write the various index table
segments with the same instance ID, which should only be used if it is a
duplicate/repeated table.

In order to cope with those, we first compare the other index table segment
properties (body/index SID, start position) before comparing the instance
ID. This will ensure that we don't consider them as duplicate, but can still
detect "real" duplicates (which would have the same other properties).

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2407>
2022-05-12 07:27:57 +02:00
Olivier Crête
86105a4774 pcapparse: Set timestamp in DTS, not PTS
This matches the behaviour of basesrc, in particular, it matches the
behaviour of udpsrc, so it's easier to use to as a replacement to test
rtpjitterbuffer and other similar elements.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2388>
2022-05-07 07:32:41 +00:00
Sebastian Dröge
7a679cc1f1 mxfmux: Disable aggregator's default negotiation
mxfmux can't negotiate caps with upstream/downstream and always outputs
specific caps based on the input streams. This will always happen before
it produces the first buffers.

By having the default aggregator negotiation enabled the same caps
would be pushed twice in the beginning, and again every time a
reconfigure event is received.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2372>
2022-05-05 17:41:58 +00:00
Sebastian Dröge
52c419b799 mpegtsmux: Disable aggregator's default negotiation
mpegtsmux can't negotiate caps with upstream/downstream and always outputs
specific caps based on the input streams. This will always happen before
it produces the first buffers.

By having the default aggregator negotiation enabled the same caps
would be pushed twice in the beginning, and again every time a
reconfigure event is received.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2372>
2022-05-05 17:41:58 +00:00
Edward Hervey
89780341e8 tsdemux: Demote warning to simple debug
That issue is actually handled, so don't pollute the logs with such warning.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2340>
2022-05-02 09:15:57 +02:00
Sebastian Dröge
bf89c80d74 interlace: Also handle a missing "interlace-mode" field as progressive
Otherwise caps negotiation will fail in situations that are supposed
to work, like:

  "video/x-raw,framerate=(fraction)60/1" ! interlace field-pattern=0 ! "video/x-raw,framerate=(fraction)30/1"

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2335>
2022-04-29 23:08:50 +00:00
Sebastian Dröge
c7db9ce70b interlace: Add some more debug output to the getcaps function
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2335>
2022-04-29 23:08:50 +00:00
Edward Hervey
10f72da504 mpegts: Handle "empty" PMT gracefully
Some streams have 2 PMT sections in a single TS packet. The first one is "valid"
but doesn't contain/define any streams. That causes an unrecoverable issue when
we try to activate the 2nd (valid) PMT.

Instead of doing that, pre-emptively refuse to process PMT without any streams
present within. We still do post that section on the bus to inform applications.

Fixes #1181

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2310>
2022-04-28 09:36:54 +00:00