Commit graph

95 commits

Author SHA1 Message Date
Edward Hervey
d678d7136c tsdemux: Fix AC-4 detection
This regression was introduced by
https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1102
and has been present since 1.18

* Stream Type 0x06 is defined in the base mpeg-ts specification as Private PES
Packets. Determining the content should be solely based on descriptors found
within the PMT.
* This was abused in that commit by defining a "bluray-only" stream type for AC4
: `ST_BD_AUDIO_AC4`
* This should be entirely handled in the regular private pes handling further
down in the code

Fixes #1154

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2175>
2022-04-14 08:33:34 +02:00
Edward Hervey
25b37c33dd mxfdemux: Fix issue with re-syncing
In case of re-syncing (i.e. moving to another partition to avoid too much of an
interleave), there was previously no checks to figure out whether a given
partition was already fully handled (i.e. when coming across it again after a
previous resync).

In order to handle this at least for single-track partitions, check whether we
have reached the essence track duration, and if so skip the partition.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2150>
2022-04-12 07:57:38 +00:00
Edward Hervey
3a77a3c696 mxfdemux: Don't double-increase track position
The essence track position should only be overriden if we sucesfully switched to
another position. In case of EOS we do not want to override it else we would
increase the track position *again* at the end of this function

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2150>
2022-04-12 07:57:37 +00:00
Edward Hervey
80e83089b5 mxfvanc: Handle empty VANC packets
Some XDCAM recorders store empty packets for VANC, and don't even include the
2byte length.

Handle them in the same way as VANC packets with 0 packets.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2122>
2022-04-06 10:05:09 +00:00
Xavier Claessens
b004464ac6 Remove glib and gobject dependencies everywhere
They are part of gst_dep already and we have to make sure to always have
gst_dep. The order in dependencies matters, because it is also the order
in which Meson will set -I args. We want gstreamer's config.h to take
precedence over glib's private config.h when it's a subproject.

While at it, remove useless fallback args for gmodule/gio dependencies,
only gstreamer core needs it.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2031>
2022-04-01 16:32:17 +00:00
Matthew Waters
f65b61fd53 speed: fix unused-but-set warning
../gst/speed/gstspeed.c:523:39: error: variable 'base' set but not used [-Werror,-Wunused-but-set-variable]
      gint64 start_value, stop_value, base;
                                      ^

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2046>
2022-03-28 10:30:23 +00:00
Matthew Waters
6f95f7263f mpegts: don't shadow res variable
Fixes unused-but-set warning:

../gst/mpegtsmux/gstbasetsmux.c:2115:43: error: variable 'res' set but not used [-Werror,-Wunused-but-set-variable]
      gboolean all_headers, done = FALSE, res = FALSE;
                                          ^

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2046>
2022-03-28 10:30:23 +00:00
Matthew Waters
063ca24bd8 mpegdemux: silence unused-but-set werror
../gst/mpegdemux/gstpesfilter.c:117:11: error: variable 'STD_buffer_size_bound' set but not used [-Werror,-Wunused-but-set-variable]
  guint16 STD_buffer_size_bound;
          ^

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2044>
2022-03-28 05:23:31 +00:00
Vivia Nikolaidou
fabf948194 tsdemux: Don't check SCTE events for being too far from the PCR
Otherwise it happens that SCTE events can only be scheduled up to 15
seconds since the last seen PCR, which is a useless restriction.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2021>
2022-03-24 18:59:37 +00:00
Seungha Yang
1bd5b7356d fakevideosink,fakeaudiosink: Proxy handoff and preroll-handoff signals
Proxy signals for application to be able to consume them

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1585>
2022-03-23 20:03:40 +00:00
Vivienne Watermeier
6c2f6c3bd4 all: Use new navigation interface and API
Use and implement the new navigation interface in all relevant sink elements,
and use API functions everywhere instead of directy accessing the event structure.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1633>
2022-03-23 13:14:52 +00:00
Branko Subasic
2689277a6b rtponviftimestamp: add support for using reference timestamps
Make it posible to configure the element to obtain the timestamps from
reference timestamp meta data instead of using the ntp-offset property,
or estimating its own offset. Currently the only time format supported
is "timestamp/x-unix", i.e. UTC time expressed in the unix time epoch.

In addition the custom event GstNtpOffset has been renamed to
GstOnvifTimestamp, to reflect that it is not necessarily used to convey
the ntp-offset. As a consequence we had to modify a couple of files in
the rtsp-server as well.

Fixes #984

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1683>
2022-03-11 08:39:50 +00:00
Tim-Philipp Müller
6fec258930 sdpdemux: add media attributes to caps to fix ptp clock handling
Those are needed by rtpjitterbuffer to do the right thing, e.g.

a=ts-refclk:ptp=IEEE1588-2008:00-**-**-**-**-**-**-**:0
a=mediaclk:direct=1266592257

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1924>
2022-03-10 20:49:36 +00:00
Edward Hervey
fb81c4dbf5 mpegts: Handle glib < 2.58
By using a workaround to the lack of g_ptr_array_steal_index.

Fixes #1078

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1917>
2022-03-10 17:24:45 +00:00
Edward Hervey
a95a3ca807 tsbase: Handle more program updates
There could be a case where the new program has the same program number as the
previous one ... but is actually located on a PID previously used for elementary
stream. In that case the program is guaranteed to not be an update of the
previous program but a completely new one.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1893>
2022-03-09 19:45:08 +00:00
Edward Hervey
76543ee73a mpegtsbase: Use an array to track programs
We need to be able to look for programs by their PID also. Using a hash table
was a bit sub-par (and overkill) for storing a range of programs.

This is needed because there could potentially be two programs with the same
program id but different PMT PID (while one is being deactivated the new one
would "exist").

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1893>
2022-03-09 19:45:08 +00:00
Jan Alexander Steffens (heftig)
95ff949eff mpegtsmux: Start last_ts with GST_CLOCK_TIME_NONE
And use the output segment position for the outgoing timestamp while it
is. This is needed to delay the calculation of `output_ts_offset` until
we actually have a usable timestamp, as tsmux will output a few initial
packets while `last_ts` is still unset.

Without this, the calculation would use the initial `0` value, which did
not have the intended effect of making VBR mode behave like CBR mode,
but always calculated an offset equal to the selected start time.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1884>
2022-03-08 10:57:44 +00:00
Jan Alexander Steffens (heftig)
e5dbf86a54 mpegtsmux: Use GST_CLOCK_STIME_NONE for output_ts_offset
It's a GstClockTimeDiff, thus GST_CLOCK_TIME_NONE isn't appropriate.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1884>
2022-03-08 10:57:44 +00:00
He Junyan
2d624a1d6b av1parse: Add a comment when the detection of TU fails.
Also update the print message.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1863>
2022-03-05 11:45:15 +08:00
Nicolas Dufresne
576b074dde camerabin: Remove drain query
This was to support very old V4L2 kernel. As we moved to DMABuf and can now
detach buffers on renegotiation, the buffer it tries to fix no longer exist.
The risk to blocking indefinitly the application does still exist though.

Fixes #1070

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1861>
2022-03-04 22:45:58 +00:00
He Junyan
9c4adf5a64 av1parse: check the error return when parse_alignment_from_caps()
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1837>
2022-03-04 21:58:15 +00:00
He Junyan
81bae87079 av1parse: Use the intersected caps to decide the alignment.
When we negotiate with downstream, We should use the intersected
caps of input and output to decide the alignment and stream format.
The current code just uses the input caps which may lack the stream
format.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1837>
2022-03-04 21:58:15 +00:00
He Junyan
ccd1ed9cbc ivfparse: Set the alignment to tu for AV1 stream.
Just do the same as other demux.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1837>
2022-03-04 21:58:15 +00:00
He Junyan
4c8777667a av1parse: Only detect the stream format when input alignment is tu.
The demux now outputs the AV1 stream in "tu" alignment, so we do not need
to detect the input alignment. But the annex b stream format is not recognized
by the demux, we still need to detect that stream format for the first input.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1837>
2022-03-04 21:58:15 +00:00
Nicolas Dufresne
29826aa80e av1parse: Save the default alignment
Otherwise the transformation is not applied and decoders may not
get the appropriate format despite the caps being negotiated
correctly.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1837>
2022-03-04 21:58:15 +00:00
Nicolas Dufresne
f627d6aafc av1parse: Remove duplicated check
The case of both strings being empty is already checked in the
helper function. No functional changes.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1837>
2022-03-04 21:58:15 +00:00
Nicolas Dufresne
57c2adeeb2 vp9parse: Fix auto-plugging of HW frame decoder
Decoders that required frame aligmment and didn't have an associated
alpha decoder were skipped. This is because the parser was constructing
caps based on the software alpha decoder, which specify super-frame
alignment.

Iterate over the caps to filter the one that have a matching codec-alpha, with
the semantic the no codec-alpha field means codec-alpha=false. Then if
everything was removed, callback to the original, so that the first non-alpha
decoder will be picked.

Fixes #820

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1855>
2022-03-04 21:24:17 +00:00
Edward Hervey
03b1790e0d tsdemux: Handle PES headers bigger than a mpeg-ts packet
While the actual PES header parser could notify us that it needed more data, we
would never actually act on it.

This commit will accumulate incoming packets in such situation and re-attempt
the header parsing.

Fixes #1027

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1852>
2022-03-04 15:14:31 +00:00
Vivia Nikolaidou
7cebd5b359 tsmux: Skip empty buffers
They can be created e.g. by aggregator when there is a gap. Such buffers
should not be muxed at all.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1611>
2022-02-25 21:29:43 +00:00
Xavier Claessens
3d8372cc50 devenv: Add some missing GStreamer specific env variables
This should make "meson devenv" closer to what "gst-env.py" sets.

- GST_VALIDATE_SCENARIOS_PATH
- GST_VALIDATE_APPS_DIR
- GST_OMX_CONFIG_DIR
- GST_ENCODING_TARGET_PATH
- GST_PRESET_PATH
- GST_PLUGIN_SCANNER
- GST_PTP_HELPER
- _GI_OVERRIDES_PATH

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1768>
2022-02-25 20:35:26 +00:00
Vivia Nikolaidou
e0d5e022a1 tsmux: Lock mux->tsmux, the programs hash table, and pad streams
They contain implementations that are not thread-safe (e.g. GList, GHashTable).

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1616>
2022-02-25 17:42:52 +00:00
Tim Mooney
97720dabe0 meson: check for libsocket and libnsl
If present, add '-lsocket' and '-lnsl' to network_deps.

ext/curl/meson.build: add network_deps to dependencies
gst/festival/meson.build: same
sys/shm/meson.build: same

Fixes linking issues on Illumos distros.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1525>
2022-02-17 18:44:49 +00:00
Seungha Yang
e1f0687b09 meson: Do hard build error for some MSVC warnings
Handle various MSVC warnings as errors for development version.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1006>
2022-02-16 17:03:29 +00:00
Stéphane Cerveau
a4b83810fe tsdemux: unlock mutex on -1 start_offfset
Closing #1013

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1694>
2022-02-14 12:58:33 +00:00
He Junyan
90cea4fadf av1parse: Add temporal unit check when TD is absent.
The current manner for deciding the new temporal unit is based on
temporal delimiter(TD) OBU. We only start a new temporal unit when
the TD comes.
But some streams do not have TD at all, which makes the output "TU"
alignment fail to work. We now add check based on the relationship
between the different layers and it can successfully judge the TU edge.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1634>
2022-02-11 14:34:04 +08:00
He Junyan
a7ca0b2079 av1parse: let the parse continue when MISSING_OBU_REFERENCE error.
Some streams may have verbose OBUs before a valid sequence header. We
should let the parse continue rather than return a error.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1634>
2022-02-11 14:21:34 +08:00
He Junyan
348658dd0a av1parse: Continue when we fail to detect the alignment.
Some streams may have problematic OBUs at the beginning, which causes
the parse fail to detect the alignment and return error. For example,
there may be verbose OBUs before a valid sequence, which should be
discarded until we meet a valid sequence. We should let the parse
continue when we meet such cases, rather than just return error.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1634>
2022-02-11 14:20:13 +08:00
Seungha Yang
66b176322c ivfparse: Don't set zero resolution on caps
It could be zero if the information is not available at ivfparse
side, or not implemented. In that case, simply don't set
width/height on caps, otherwise downstream would be confused

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1649>
2022-02-10 20:30:40 +00:00
Jan Alexander Steffens (heftig)
2f7ec968f4 tsmux: Allow specifying PMT order via the prog-map
Look for an entry `PMT_<PID>` in the `prog-map`, which specifies the
relative index of the stream in the PMT.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1510>
2022-01-24 15:37:46 +00:00
Jan Alexander Steffens (heftig)
22fb7b7b71 tsmux: Deterministically order program streams by PID
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1510>
2022-01-24 15:37:46 +00:00
Jan Alexander Steffens (heftig)
b7ae1fa683 tsmux: Deterministically order PAT programs by number
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1510>
2022-01-24 15:37:46 +00:00
Jan Alexander Steffens (heftig)
853178894e tsmux: Remove program_array_index
It's only used for removal. Let's just scan the array.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1510>
2022-01-24 15:37:46 +00:00
Jan Alexander Steffens (heftig)
2acaa3940a tsmux: Replace streams GArray with GPtrArray
This is more appropriate.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1510>
2022-01-24 15:37:46 +00:00
Tim-Philipp Müller
cab0eaed1c mxfdemux: don't error out if VANC track only contains packets we don't handle
If the VANC track does contain packets, but we skip over all packets, just
treat it the same as if there hadn't been any packets at all and send a
GAP event instead of erroring out with "Failed to handle essence element".

We would error out because when we reach the end of the loop without having
found a closed caption packet the flow return variable is still FLOW_ERROR
which is what it has been initialised to.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1518>
2022-01-13 11:34:37 +00:00
Stéphane Cerveau
51e93408a9 alphacombine: update example launch line
Fix typos and missing videoconvert element to demonstrate
the alphacombine element.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1494>
2022-01-06 14:59:02 +00:00
He Junyan
d334c08b55 av1parse: Set the "tu" as the default alignment.
The tu(temporal unit) is more widely used than the current alignment.
We now change the default alignment to tu.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1468>
2022-01-05 08:47:06 +00:00
He Junyan
cfd69b0467 av1parse: Fix the wrong DELTA_UNIT flag setting for key frames.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1468>
2022-01-05 08:47:06 +00:00
He Junyan
2266f70d79 av1parse: Copy the PTS and DURATION when we create data.
We need to create header buffers for annex b format. This kind of
buffers should inherit the PTS and DURATION from the original buffers.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1468>
2022-01-05 08:47:06 +00:00
He Junyan
13f0128f7e codecparsers: av1parse: Add the DECODE_ONLY flag to output buffer.
When the alignment is ALIGN_FRAME and the output buf contains a frame
which is not to be shown, the GST_BUFFER_FLAG_DECODE_ONLY flag should
be set.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1050>
2021-12-25 12:18:24 +00:00
Seungha Yang
40213b5c75 av1parse: Use descriptive profile name instead of numeric
As per AV1 specification Annex A, AV1 profiles have explicit and
descriptive names for each seq_profile.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1456>
2021-12-21 22:20:30 +09:00