udpsrc gtk-doc documentation refers to sockfd and closefd properties which has
been removed. This patch replaces those references to socket and close-socket
respectively.
https://bugzilla.gnome.org/show_bug.cgi?id=734987
They are very confusing for people, and more often than not
also just not very accurate. Seeing 'last reviewed: 2005' in
your docs is not very confidence-inspiring. Let's just remove
those comments.
Protect caps with the lock.
Don't push the caps event from the set_property function but mark the
pad for reconfiguration so that it will renegotiate and push the new
caps event in the streaming thread.
We should open the socket when going to NULL<->READY and not in the
start/stop vemthod, which is called in READY<->PAUSED. This makes it
possible to allocate a socket without going to PAUSED (and starting the
negotiation).
On Windows it's not possible to bind to a multicast address
but the OS will make sure to filter out all packets that
arrive not for the multicast address the socket joined.
On Linux and others it is necessary to bind to a multicast
address to let the OS filter out all packets that are received
on the same port but for different addresses than the multicast
address
And deprecate the multicast-group property and replace it with the
address property.
https://bugzilla.gnome.org/show_bug.cgi?id=707042
This is equivalent to multicast-group currently for backwards compatibility.
In 2.0 this should be handled separately, the former only being the multicast
group and the latter always being the address the socket is bound to, even if
a multicast group is given.
On Windows and OS/X, _get_available_bytes() may not return the size
of the next pending packet, but the size of all pending packets in
the kernel-side buffer, which might be rather large depending on
configuration. Sanity-check the size returned by _get_available_bytes()
to make sure we never allocate more memory than the max. size for
a packet, if it's an IPv4 socket.
https://bugzilla.gnome.org/show_bug.cgi?id=610364
Make it possible to set the timeout after we went to the READY state by using
the timeout when checking the condition. This also makes it possible to set the
timeout with a higher granularity than seconds.
udpsrc/udpsink are almost always used with RTP, so let's use an
RTP port as the default port. It's unclear why 4951 was used, it
goes back to early commits in CVS.
It is allowed to send/receive UDP packets with no data. When such
a packet is available, select() will return with success but
ioctl(FIONREAD) will return 0. But a read() must still occur in
order to clear off the UDP packet from the queue.
This patch will read the dataless packet from the socket. If
select() was woken for other reasons (and FIONREAD returns 0),
this may result in a UDP packet getting accidentally dropped.
But since UDP is not reliable, this is acceptable.
NOTE: This patch fixes a nasty bug where sending a dataless
UDP packet to a udpsrc instance will cause an infinite
loop.
https://bugzilla.gnome.org/show_bug.cgi?id=666644
Signed-off-by: John Ogness <john.ogness@linutronix.de>
On windows builds, sets source address for bind to INADDR_ANY, while
maintaining the original multicast group address for subsequent join.
Fixes#595978
Add network interface selection when joining multicast groups.
Useful when using the udpsrc on multihomed hosts.
Fixes#575234.
API: GstUDPSrc::multicast-iface
Previously the sockaddr length used for recvfrom() was calculated as
sizeof (struct sockaddr). However, this is too little to hold an IPv6
address, so the full size of the gst_sockaddr union should be used
instead.
When we are dealing with connected sockets shared between a udpsrc and a udpsink
we might receive ICMP connection refused error messages in udpsrc that will
cause it to go into a bursty loop because the poll returns right away without a
message to read.
Instead of looping, read the error message from the error queue in udpsrc.
Fixes#567857.
Link to properties. Correct titles for examples. Document a few trivial cases. Keep lists in section file and docs/plugins/Makefile.am alphabetically ordered. Fix warnings that gtk-doc points out.
Link to properties. Correct titles for examples. Document a few trivial cases. Keep lists in section file and docs/plugins/Makefile.am alphabetically ordered.
Original commit message from CVS:
* gst/udp/gstmultiudpsink.c:
* gst/udp/gstudpnetutils.c:
* gst/udp/gstudpnetutils.h:
* gst/udp/gstudpsrc.c:
Fix multiudpsink on OSX by passing the specific length of the socket,
refactor that into a function shared with the same thing in udpsrc.
Original commit message from CVS:
* gst/udp/gstudpsrc.c: (gst_udpsrc_class_init),
(gst_udpsrc_set_uri), (gst_udpsrc_start):
Switch on the socket family to get the addrlen size right.
Original commit message from CVS:
Patch by: Daniel Franke <df at dfranke dot us>
* gst/udp/gstudpsrc.c: (gst_udpsrc_create), (gst_udpsrc_start):
OS X's bind() implementation is picky about its addrlen parameter and
fails with EINVAL if it is larger than expected for the socket's address
family. Set the length to the expected length instead. Fixes#553191.
Original commit message from CVS:
* gst/goom/convolve_fx.c:
* gst/goom/filters.c:
* gst/goom/goom_config.h:
* gst/goom/goom_core.c:
* gst/goom/goom_tools.h:
Fix build with MSVC: include glib.h to define inline appropriately,
use header guards where needed.
* gst/udp/gstudpnetutils.c:
* gst/udp/gstudpsrc.c:
Fix build with MSVC: use WSA* constants/functions where appropriate, use
g_snprintf rather than snprintf.
Fixes#544433.
Original commit message from CVS:
* gst/udp/gstudpsrc.c: (gst_udpsrc_start):
Call getsockname() after the call to bind() to get updated values
for the port, etc. This fixes the usage of udpsrc on anonymous
binding and it's usage by rtspsrc. Fixes bugs #539372, #539548.
Thanks to Aurelien Grimaud for pointing out the obvious fix.
Original commit message from CVS:
* gst/udp/gstudpsrc.c: (gst_udpsrc_class_init), (gst_udpsrc_init),
(gst_udpsrc_create), (gst_udpsrc_set_property),
(gst_udpsrc_get_property), (gst_udpsrc_start), (gst_udpsrc_stop):
* gst/udp/gstudpsrc.h:
Add property to control automatic join/leave of multicast groups.
Add G_LIKELY.
Remove setting caps on buffers explicitly, basesrc does that for us now.
Improve debug info.
Convert some non-fatal error into warnings.
Use g_ntohs for better portability.
Leave multicast groups when stopping.
When using external sockets, use getsockname() on them to fill up the
addr structure before calling methods that use the structure.
Should all fix#536903.
API: GstUDPSrc::auto-multicast property
Original commit message from CVS:
* gst/udp/gstmultiudpsink.c: (gst_multiudpsink_init_send),
(gst_multiudpsink_add_internal):
* gst/udp/gstudpnetutils.c: (gst_udp_set_loop_ttl),
(gst_udp_join_group):
* gst/udp/gstudpnetutils.h:
* gst/udp/gstudpsrc.c: (gst_udpsrc_start):
Joining a multicast group and setting the loop/ttl properties are
totally unrelated tasks are must be separated.
Original commit message from CVS:
Patch by: Bruno Santos <brunof at ua dot pt>
* gst/udp/gstudpnetutils.c: (gst_udp_get_addr),
(gst_udp_join_group), (gst_udp_leave_group),
(gst_udp_is_multicast):
* gst/udp/gstudpnetutils.h:
Provide a bunch of helper methods to deal with IPv4 and IPv6
transparently.
* gst/udp/gstmultiudpsink.c: (gst_multiudpsink_class_init),
(gst_multiudpsink_init), (gst_multiudpsink_set_property),
(gst_multiudpsink_get_property), (join_multicast),
(gst_multiudpsink_init_send), (gst_multiudpsink_add_internal),
(gst_multiudpsink_remove):
* gst/udp/gstmultiudpsink.h:
Add multicast TTL and loopback properties.
Use the helper methods to implement ip4 and ip6.
* gst/udp/gstudpsrc.c: (gst_udpsrc_create), (gst_udpsrc_start):
* gst/udp/gstudpsrc.h:
Use the helper methods to implement ip4 and ip6.
Fixes#515962.
Original commit message from CVS:
Patch by: Youness Alaoui <youness.alaoui at collabora co uk>
* gst/udp/gstudpsrc.c: (gst_udpsrc_create):
Don't error out if we get an ICMP destination-unreachable
message when trying to read packets on win32 (#529454).
Original commit message from CVS:
* gst/rtp/gstasteriskh263.c: (gst_asteriskh263_chain):
* gst/udp/gstmultiudpsink.c: (gst_multiudpsink_add_internal):
* gst/udp/gstudpsrc.c: (gst_udpsrc_start):
Use GLib versions of htonl, htons, ntohl and ntohs in order
to avoid problems on win32 (#529707).
Original commit message from CVS:
Patch by: Ole André Vadla Ravnås <ole.andre.ravnas@tandberg.com>
* gst/udp/gstudpsrc.c: (gst_udpsrc_finalize), (gst_udpsrc_start),
(gst_udpsrc_stop):
Properly balance WSA_Cleanup with WSA_Startup.
Also make the poll controllable on windows. Fixes#520888.
Original commit message from CVS:
Patch by: Peter Kjellerstedt <pkj at axis com>
* gst/udp/gstudpsrc.c: (gst_udpsrc_init), (gst_udpsrc_create),
(gst_udpsrc_get_property), (gst_udpsrc_start), (gst_udpsrc_unlock),
(gst_udpsrc_unlock_stop), (gst_udpsrc_stop):
* gst/udp/gstudpsrc.h:
Port to GstPoll. See #505417.
Original commit message from CVS:
Patch by: Ole André Vadla Ravnås <ole.andre.ravnas@tandberg.com>
* configure.ac:
* gst/udp/gstdynudpsink.c:
* gst/udp/gstdynudpsink.h:
* gst/udp/gstmultiudpsink.c:
* gst/udp/gstmultiudpsink.h:
* gst/udp/gstudpsink.c:
* gst/udp/gstudpsink.h:
Fix includes for MSVC and GLib-2.14.0 (#492388).
* gst/udp/gstudpsrc.c: (gst_udpsrc_start):
No more pipe define since GLib-2.14.0, need to use _pipe() directly.
Original commit message from CVS:
Based on patch by: Laurent Glayal <spglegle yahoo fr>
* gst/udp/gstudpsrc.c: (gst_udpsrc_create):
When the socket is used by the app for other purposes, don't generate an
error if there is activaty on the socket that is not data related.
Fixes#487488.
Original commit message from CVS:
* gst/udp/gstudpsrc.c: (gst_udpsrc_init), (gst_udpsrc_create):
Make udpsrc timestamp outgoing buffers based on when they were received.
Also make it output a segment in time.
Original commit message from CVS:
* gst/udp/gstmultiudpsink.c: (gst_multiudpsink_class_init),
(gst_multiudpsink_init), (gst_multiudpsink_set_property),
(gst_multiudpsink_get_property), (gst_multiudpsink_init_send),
(gst_multiudpsink_close), (gst_multiudpsink_add):
* gst/udp/gstmultiudpsink.h:
Add support for getting and setting the socket to use.
* gst/udp/gstudpsrc.c: (gst_udpsrc_class_init), (gst_udpsrc_init),
(gst_udpsrc_create), (gst_udpsrc_get_property):
Add support for getting the currently used socket.
Original commit message from CVS:
* gst/udp/gstudpsrc.c: (gst_udpsrc_create):
Improve UDP performance by avoiding a select() when we have data
available immediatly.
Original commit message from CVS:
* gst/udp/gstudpsrc.c: (gst_udpsrc_class_init),
(gst_udpsrc_create), (gst_udpsrc_unlock), (gst_udpsrc_unlock_stop):
Since we depend on 0.10.13 -core, override the unlock_stop vmethod for
safer shutdown.
