Commit graph

438 commits

Author SHA1 Message Date
Tristan Matthews
8e0adba996 gstrtpceltpay: don't always fixate sink caps to 1 channel
The getcaps function should not fixate the channels field until we
get the encoding-params field from our srcpad's caps. Fixes #620591
2010-06-05 10:02:35 +02:00
Sjoerd Simons
952fd666b3 Keep announcing the delivery-method in the capabilities
Even though we don't use delivery-method in our payloader, older versions of
the theora payloader in gstreamer required it. As such we need to keep this
around in the caps for backwards-compatibility.

This reverts part of 49463a37cb

Fixes #618940
2010-06-03 18:47:40 -04:00
Wim Taymans
ffc06e17f0 mp4gdepay: calculate the frame duration correctly
When we calculate the frame duration, we need to use the amount of
frames in the _previous_ packet, not the current packet. The frame duration is
needed to correctly de-interleave interleaved streams. This fixes the case where
there are a variable number of frames in a packet.

Fixes #620494
2010-06-03 19:39:04 +02:00
Wim Taymans
49463a37cb rtptheora: remove delivery-method from caps
We can accept all delivery methods so don't advertise anything on the caps or
parse anything, we will handle whatever we receive.

Fixes #618940
2010-05-25 18:53:48 +02:00
Olivier Crête
28f509fdca rtptheoradepay: make delivery-method parameter optional
It probably will not be in the final RFC as it is not in RFC 5215 for Vorbis.
If there is a configuration specified, assume it is in-line and if nothing is
specified, assume it is in-band.

https://bugzilla.gnome.org/show_bug.cgi?id=618386
2010-05-13 12:22:36 +02:00
Wim Taymans
3e4bc043a5 celtpay: fix queue duration calculations
Don't blindly add the durations of incomming buffers to the total queued
duration because it might be invalid. Mark the total queued duration invalid
when we receive an invalid incomming timestamp because that's when we lose track
of the total queued duration.

Fixes #618324
2010-05-13 11:30:27 +02:00
Mark Nauwelaerts
4cff2e2c67 rtph264pay: extract SPS and PPS from property provided parameter set
... so it can also be regularly inserted into the stream if so configured.

Fixes #617164.
2010-05-12 10:24:10 +02:00
Tim-Philipp Müller
c209a6ab40 rtp: dist missing header file to fix make distcheck 2010-05-11 20:26:37 +01:00
Olivier Crête
34d0d59142 rtph264pay: Re-send SPS/PPS when requested
https://bugzilla.gnome.org/show_bug.cgi?id=606689
2010-05-10 15:07:09 +02:00
Mark Nauwelaerts
90311e522f rtph264pay: fix typo in debug message 2010-05-10 13:35:55 +02:00
Mark Nauwelaerts
af6fc84377 rtptheorapay: add config-interval parameter to re-insert config in stream
Add a new config-interval property to instruct the payloader to insert
configuration headers at periodic intervals in the stream
(when a keyframe is countered).
2010-05-10 13:35:52 +02:00
Mark Nauwelaerts
14b14fdf7a rtptheoradepay: fix in-band configuration parsing
Also make configuration header parsing a bit more relaxed with respect
to length field interpretation.
2010-05-10 13:35:50 +02:00
Mark Nauwelaerts
b899afaeb6 rtpvorbisdepay: fix in-line configuration parsing
Also make configuration header parsing a bit more relaxed with respect
to length field interpretation.
2010-05-10 13:35:48 +02:00
Mark Nauwelaerts
7bd3943bb9 rtptheorapay: do not discard downstream flow return 2010-05-10 13:35:44 +02:00
Mark Nauwelaerts
53928a74fa rtptheorapay: refactor buffer payloading 2010-05-10 13:35:41 +02:00
Mark Nauwelaerts
220f865f77 rtpmp4vpay: add config-interval parameter to re-insert config in stream
Add a new config-interval property to instruct the payloader to insert
config (VOSH, VOS, etc) at periodic intervals in the stream
(when a GOP or VOP-I is encountered).

Based on patch by <marc.leeman at gmail.com>

Fixes #607452.
2010-05-04 11:19:43 +02:00
Tim-Philipp Müller
c1d24699f5 rtp: fix printf format of some debug messages 2010-05-01 11:25:26 +01:00
Mark Nauwelaerts
be5ffd96fe rtptheoradepay: also accept in-band configuration
Fixes #574416 (theora).
2010-04-30 13:54:56 +02:00
Mark Nauwelaerts
a344cfba27 rtpvorbisdepay: also accept in-line configuration
Fixes #574416 (vorbis).
2010-04-30 13:54:52 +02:00
Olivier Crête
7bc3253761 rtptheoradepay: Ignore packets without a known codebook
Don't produce an error if a packet is received without a valid codebook,
it's possible that the codebook will just be coming later.

See #574416.
2010-04-30 13:54:50 +02:00
Mark Nauwelaerts
6bf7f5cfd3 rtph264depay: DELTA_UNIT marking of output buffers
... which evidently makes (most) sense if output buffers are
actually frames.

Partially based on a patch by
Miguel Angel Cabrera <mad_aluche at hotmail.com>

Fixes #609658.
2010-04-30 13:50:03 +02:00
Mark Nauwelaerts
0206b67b1d rtph263depay: extra keyframe info from PTYPE header
... as opposed to taking it from h263 payload header, which need not
be so reliable.

Fixes #610172.
2010-04-30 13:50:00 +02:00
Mark Nauwelaerts
fe9e6d82ee rtph263depay: also use Picture Start Code to detect packet loss
This ensures a whole frame is dropped if a (start) packet is lost,
rather than relying only on the DISCONT flag.
2010-04-30 13:49:57 +02:00
Mark Nauwelaerts
84ac277add rtph263depay: detect frame start using Picture Start Code
So we stop dropping fragments as soon as there is a picture start (code).
In particular, this prevents dropping the first frame following
initial DISCONT.
2010-04-30 13:49:54 +02:00
Mark Nauwelaerts
e7903311f5 rtph263depay: handle a few FIXMEs 2010-04-30 13:49:51 +02:00
Mark Nauwelaerts
3692bbb7ae rtph263depay: slightly refactor payload dropping 2010-04-30 13:49:47 +02:00
Mark Nauwelaerts
a08f76a92e rtph263pay: use found GOBs to apply Mode A payloading
... rather than falling back to sending the whole frame in one packet
if number of GOB startcodes < maximum.
One might take this further and still perform Mode B/C payloading,
but at least this should cater for decent fragments in typical cases.

Fixes #599585.
2010-04-30 13:49:43 +02:00
Wim Taymans
754007b344 qcelpdepay: add first version of a QCELP depayloader 2010-04-29 18:07:10 +02:00
Mark Nauwelaerts
e053a89c21 rtph264depay: profile-level-id is an optional parameter
So, if needed, extract the corresponding info from
sprop-parameter-sets.

Based on patch provided by <dxssx at gmail.com>

Fixes #612657.
2010-04-16 12:14:26 +02:00
Stefan Kost
6772badb88 docs: enable the 2 of 65 rtp elements in the docs 2010-04-08 17:19:41 +03:00
Marco Ballesio
2ff1558a87 h264depay: handle properly STAPs
in rtph264depay.c, lines 577-576, NALU-type 24 (Single-Time Aggregation
Packet) is handled in fall-through as NALU-type 26 (unhandled).

This leads high quality h264 streams such as:

rtsp://stream.yle.mobi/yle/areena/MEDIA_E0342657_p3.mp4

to fail with "NAL unit type 24 not supported yet" (but it's actually
supported), and thus to close any stream which contains STAPs.

The proposed one-liner patch fixes the issue.
Fixes #615051.
2010-04-07 16:17:06 +03:00
Benjamin Otte
412cc10314 Add -Wold-style-definition flag
And fix the warnings
2010-03-21 15:17:46 +01:00
Benjamin Otte
3f511ec361 Add -Wwrite-strings to the configure flags
... and fix all warnings
2010-03-21 14:17:47 +01:00
Wim Taymans
b019a78ab8 h264pay: fix config-interval property
Use the same units for comparing the elapsed time against the interval.

Fixes #613013
2010-03-19 17:13:07 +01:00
Tim-Philipp Müller
073201b329 build: Makefile.am cleanups
Mostly add $(GST_BASE_CFLAGS) where it was missing, but also fix up
order of flags and libs if needed (see docs/random/moving-plugins).
2010-03-18 21:34:24 +00:00
Benjamin Otte
cccfeaa59c gst_element_class_set_details => gst_element_class_set_details_simple 2010-03-18 14:32:00 +01:00
Mark Nauwelaerts
fd5164af96 rtph264depay: do not call _push_ts with unneeded (and wrong) time parameter
Fixes #613206.
2010-03-18 12:43:14 +01:00
Benjamin Otte
1055aaa9cb Add -Wredundant-decls warning flag
Also fix compile issues
2010-03-17 19:35:10 +01:00
Benjamin Otte
3342b1679e Add -Wmissing-declarations -Wmissing-prototypes warning flags
And fix all the warnings.
2010-03-17 18:23:28 +01:00
Wim Taymans
7e363149f3 mp4gdepay: improve constantDuration guessing
When no constantDuration has been given in the caps, try to derive one from the
timestamp difference between packets. Also keep doing this for each packet
because some broken streams might simply provide wrong timestamps.
2010-03-17 16:27:13 +01:00
Wim Taymans
cabe01ef95 Revert "rtph263depay: baseclass handles timestamps for us"
This reverts commit 564581e1b8.

If we don't call push_ts, there will be no timestamp at all on the outgoing
buffer.

Fixes #612154
2010-03-08 17:48:27 +01:00
Wim Taymans
968c981e74 h263pay: fix typo in debug 2010-03-08 17:47:14 +01:00
Wim Taymans
3a09d334a0 rtpmp4gdepay: avoid division by 0
Avoid a division by 0 when no constantDuration was specified and when out two
timestamps are equal.

Fixes #610265
2010-02-23 12:58:03 +01:00
Wim Taymans
e43839eae9 dvdepay: don't output frames until we have a header
Wait for the complete first 6 header DIF packets before outputting a frame.
Decoders need this info to correctly decode the data.

Fixes #610556
2010-02-23 12:54:36 +01:00
Wim Taymans
ad6d4540a7 rtppay: don't ignore result from set_outcaps
set_outcaps can fail and we need to propagate the result upstream.
2010-02-12 13:53:58 +01:00
Mark Nauwelaerts
71e35b2bf3 rtpspeexpay: fix occasional buffer leak
Fixes #608255.
2010-01-27 17:05:34 +01:00
Olivier Crête
9afc247906 rtpg729pay: ptime should is in nanoseconds
https://bugzilla.gnome.org/show_bug.cgi?id=607403
2010-01-21 10:54:14 +01:00
Wim Taymans
1f6b06ce66 rtph264pay: scale spspps_interval to milliseconds
The spspps_interval is kept in seconds. Convert it to milliseconds before
comparing it to another value in milliseconds.
2010-01-20 16:29:57 +01:00
Wim Taymans
95333115cd rtph264pay: rename spspps-interval property
Rename the spspps-interval property to config-interval because it is nicer.
2010-01-20 15:44:40 +01:00
Olivier Crête
c4fa559f15 rtph264pay: Don't set profile-level-id in out caps
The profile-level-id represents restrictions on what can be sent, it does not
describe the stream. So it should be reflected in the sink caps of the
payloader, not the src caps.

https://bugzilla.gnome.org/show_bug.cgi?id=607353
2010-01-19 13:47:38 +01:00