This is supposed to be either in the codec_data (avc stream format) or inside
the stream, and we extract it from there. It should not be set from a
property as it's stream specific.
https://bugzilla.gnome.org/show_bug.cgi?id=767789
The Session Data Protocol doesn't allow specifying a cipher for the
SRTCP, so it will use the SRTP one. In the "srtpenc" element the cipher
"aes-128-icm" is the default for SRTP and SRTCP, but if we want to have
an SRTCP with the "aes-256-icm" cipher then we also need to set the SRTP
cipher to "aes-256-icm", otherwise "aes-128-icm" will be used instead.
https://bugzilla.gnome.org/show_bug.cgi?id=767799
With non-time segments, it now assumes that the arrival time of packets
is not relevant and that only the RTP timestamp matter and it produces
an output segment start at running time 0.
https://bugzilla.gnome.org/show_bug.cgi?id=766438
No variables were added/removed. This was just a good excuse to:
* Comment what most variables are used for (and when)
* Order them in such a way as to show first the common variables used
in all cases, followed by those only used in push-mode
We shouldn't go through segment activation as we will only have a limited
understanding of how the whole stream timeline looks like from the moof. We
only know about the current fragment, while upstream knows about the whole
stream.
This fixes seeking in DASH streams, both for seeks after the current moof and
for seeks into the current moof. The former would fail because the moof ends
and we can't activate any segment, the latter would cause a segment that stops
at the moof end, and no further fragments would be played because we end up
being EOS.
https://bugzilla.gnome.org/show_bug.cgi?id=767071
Some endpoints (like Tandberg E20) can send BYE packet containing our
internal SSRC. I this case we would detect SSRC collision and get rid
of the source at some point. But because we are still sending packets
with that SSRC the source will be recreated immediately.
This brand new internal source will not have some variables incorrectly
set in its state. For example 'seqnum-base` and `clock-rate` values will be
-1.
The fix is not to act on BYE RTCP if it contains internal or unknown
SSRC.
https://bugzilla.gnome.org/show_bug.cgi?id=762219
matroskademux would take the GST_OBJECT_LOCK in
- gst_matroska_demux_push_codec_data_all()
- gst_matroska_demux_query()
Some parse element such as FLAC checks upstream seekability, and
there is some use cases that matroska-demux is linked to a parse element
(e.g.,FLAC format) without intermediate elements (e.g., queue).
In this case, matroska-demux never returns from _push_codec_data_all()
because the parser can return only after it receives the response to
the upstream query, but that's not going to happen because it's
deadlocked.
Elements must not hold the object lock whilst pushing out events
or data.
https://bugzilla.gnome.org/show_bug.cgi?id=766645
The GST_BUFFER_OFFSET of output buffers returned to GstRtpBasePayload
should reflect the number of "samples" in the unit of the RTP clock in this
buffer. If this is not true, then it shouldn't be set.
https://bugzilla.gnome.org/show_bug.cgi?id=761943
segment_duration and media_time should be parsed based on version
of elst box. Specification defines that an elst box with version 1
has uint64 and int64 values for segment_duration and media_time,
respectively.
https://bugzilla.gnome.org/show_bug.cgi?id=766301
Set the async-handling property on GstBin to let it manage
async-handling instead of the local handling from the previous
commit. Works because of #174a5e in core
When switching fragments, hide the async-start/async-done
messages from the parent bin, as otherwise we sometimes (very rarely)
hang in PAUSED instead of returning / continuing to PLAYING
state.
1. according to RFC, T bit is only set when either the RTP packet only contains the J2K main header, or the packet contains tile parts from multiple tiles. This is now being managed correctly in the code. The second scenario cannot happen with our payloader, since tile headers are always placed in their own RTP packet, and so a packet cannot contain tile parts from multiple tiles.
However, I have added code to track if multiple tile parts are included in a single RTP packet, in case in the future we want to put header and data in same packet.
2. Old code would set the tile id to zero for all J2K packets. This is now set correctly to the appropriate tile id.
https://bugzilla.gnome.org/show_bug.cgi?id=745187
Properly handle edts segments for push-based operation seeking.
We only support edts that a single segment that has media at the end,
being preceeded by any number of gap segments.
This also allows the qt segment rate to be respected after seeks
https://bugzilla.gnome.org/show_bug.cgi?id=765669
When a packet arrives that has already been considered lost as part of a
large gap the "lost timer" for this will be cancelled. If the remaining
packets of this large gap never arrives, there will be missing entries
in the queue and the loop function will keep waiting for these packets
to arrive and never push another packet, effectively stalling the
pipeline.
The proposed fix conciders parts of a large gap definitely lost (since
they are calculated from latency) and ignores the late arrivals.
In practice the issue is rare since large gaps are scheduled immediately,
and for the stall to happen the late arrival needs to be processed
before this times out.
https://bugzilla.gnome.org/show_bug.cgi?id=765933
The access to the session hash table must happen while the session lock is
taken, otherwise another thread might modify the hash table while we're
creating the stats.
https://bugzilla.gnome.org/show_bug.cgi?id=766025
This signal allows a user to directly return a sorted list of
files to be joined, so that they don't have to follow the
filename pattern that the "location" property expects.
https://bugzilla.gnome.org/show_bug.cgi?id=753625
The wav spec tells that 'fmt' (and 'bext' if present) must come before 'data'.
There is no requirement for 'fmt' to be first. We already had a list of chunks
to skip, but it is easier to just skip any chunk while seeking for 'fmt'.
This fixes reading files generated by ProTools.
Via the MPEG-4 Part 3 spec we can support the other layers too.
Also correct the samples per frame calculation for MP3 if it's MPEG-2 or
MPEG-2.5.
https://bugzilla.gnome.org/show_bug.cgi?id=765725
We only changed them for UDP so far, which caused the wrong seqnum-base and
other information to be passed to rtpjitterbuffer/etc when seeking. This
usually wasn't that much of a problem as the code there is robust enough, but
every now and then it causes us to drop up to 32756 packets before we
continue doing anything meaningful.
https://bugzilla.gnome.org/show_bug.cgi?id=765689
set_fields() should only be called in the beginning, otherwise we will never
remember the maximum audio chunk size and write a wrong block align... which
then causes wrong timestamps and other problems.
3ea338ce27 changed avimux to do that, but it
never actually kept track of the max audio chunk for MP3 and MP2. These are
knowing the hdr.scale only after parsing the frames instead of at setcaps
time.
timescale/1 is unreliable value for framerate. Due to downstream
element usually use framerate generated by qtdemux, let it be omitted
until the framerate can be reliably calculated.
https://bugzilla.gnome.org/show_bug.cgi?id=764733
When playing a stream that has been protected by DASH CENC, playback
will fail if a seek is performed. Qtdemux produces the error "stream
is protected using cenc, but no cenc protection system information
has been found" and playback stops.
The problem is that gst_qtdemux_reset() gets called as part of the
FLUSH during a seek. This function frees the protection_system_ids
array. When gst_qtdemux_configure_protected_caps() is called after the
seek has completed, the protection_system_ids array is empty and
qtdemux is unable to create the correct output caps for the protected
stream.
This commit changes it to only free the protection_system_ids on
hard resets.
https://bugzilla.gnome.org/show_bug.cgi?id=761787
This allows disabling of sender address retrieval, which might
be useful in certain scenarios, like when the socket is connected,
or the sender address is not of interest (e.g. when receiving an
MPEG-TS stream). Disabling sender address retrieval in those
cases can have minor performance advantages.
https://bugzilla.gnome.org/show_bug.cgi?id=563323
The server can send multiple crypto sessions, one for each SSRC with its
own rollover counter. We parse this information and pass it to the SRTP
decoder via the "request-key" signal.
https://bugzilla.gnome.org/show_bug.cgi?id=730540
Otherwise we will use fields from the old caps with everything set up for the
new caps, causing crashes and worse.
Also don't do anything if the same caps are set twice.
qtdemux->streams is an array, it will never evaluate to true when comparing
to NULL. Instead we want to check the number of streams to make sure the
stream is available.
https://bugzilla.gnome.org/show_bug.cgi?id=753614
CID 1358389
The head of the queue is the oldest packet (as in lowest seqnum), the tail is
the newest packet. To calculate the fill level, we should calculate tail-head
while considering wraparounds. Not the other way around.
Other code is already doing this in the correct order.
https://bugzilla.gnome.org/show_bug.cgi?id=764889
When downstream blocks, "lost" timers are created to notify the
outgoing thread that packets are lost.
The problem is that for high packet-rate streams, we might end up with
a big list of lost timeouts (had a use-case with ~1000...).
The problem isn't so much the amount of lost timeouts to handle, but
rather the way they were handled. All timers would first be iterated,
then the one selected would be handled ... to re-iterate the list again.
All of this is being done while the jbuf lock is taken, which in some use-cases
would return in holding that lock for 10s... blocking any buffers from
being accepted in input... which would then arrive late ... which would
create plenty of lost timers ... which would cause the same issue.
In order to avoid that situation, handle the lost timers immediately when
iterating the list of pending timers. This modifies the complexity from
a quadratic to a linear complexity.
https://bugzilla.gnome.org/show_bug.cgi?id=762988
After clearing the adapter due to a DISCONT, as might happen when some packet(s)
have been lost, the depayloader was pushing data into the adapter (which had no
header due to the clear), creating a headerless frame out of it, and sending it
downstream. The downstream decoder would then usually ignore it; unless there
were lots of DISCONTs from the jitterbuffer in which case the decoder would reach
its max_errors limit and throw an element error. Now we just discard that data.
It is probaby not worth trying to salvage this data because non-progressive
jpeg does not degrade gracefully and makes the video unwatchable even with
low packet loss such as 3-5%.
The PIFF data is stored in a custom UUID box which is parsed and the
crypto_info of the element is updated accordingly. This allows
downstream decryptors to process and decrypt the protected content.
https://bugzilla.gnome.org/show_bug.cgi?id=753614
payload_buffer hasn't been assigned a value before the jumps to
switch_failed or packet_short. So the value must be NULL. No need
to unmap and unref.
CID #1316476
Free memory of current macroblock once it isn't needed so it isn't leaked
by the call of the gst_rtp_h263_pay_B_mbfinder function.
if (!(mac = gst_rtp_h263_pay_B_mbfinder (context, gob, mac, mb))) {
CID 1212156
Make sure that all data is drained out when the reference pad
goes EOS. Fixes a problem where data that arrives on other
pads after the reference pad finishes can stall forever and
never pass EOS.
https://bugzilla.gnome.org/show_bug.cgi?id=763711
Deadlock occurs when splitting files if one stream received no buffer during
the first GOP of the next file. That can happen in that scenario for example:
1) The first GOP of video is collected, it has a duration of 10s.
max_in_running_time is set to 10s.
2) Other streams catchup and we receive the first subtitle buffer at ts=0 and
has a duration of 1min.
3) We receive the 2nd subtitle buffer with a ts=1min. in_running_time is set to
1min. That buffer is blocked in handle_mq_input() because
max_in_running_time is still 10s.
4) Since all in_running_time are now > 10s, max_out_running_time is now set to
10s. That first GOP gets recorded into the file. The muxer pop buffers out
of the mq, when it tries to pop a 2nd subtitle buffer it blocks because the
GstDataQueue is empty.
5) A 2nd GOP of video is collected and has a duration of 10s as well.
max_in_running_time is now 20s. Since subtitle's in_running_time is already
1min, that GOP is already complete.
6) But let's say we overran the max file size, we thus set state to
SPLITMUX_STATE_ENDING_FILE now. As soon as a buffer with ts > 10s (end of
previous GOP) arrives in handle_mq_output(), EOS event is sent downstream
instead. But since the subtitle queue is empty, that's never going to
happen. Pipeline is now deadlocked.
To fix this situation we have to:
- Send a dummy event through the queue to wakeup output thread.
- Update out_running_time to at least max_out_running_time so it sends EOS.
- Respect time order, so we set out_running_tim=max_in_running_time because
that's bigger than previous buffer and smaller than next.
https://bugzilla.gnome.org/show_bug.cgi?id=763711
RFC 2435 mentions in section 4.1 that U/V use table number 1, but this seems
just like an example. Some encoders are not following that and there seems to
be no reason to reject their streams.
https://bugzilla.gnome.org/show_bug.cgi?id=761345
It's not like we could accept any other caps here. The caps are decided by the
upstream caps event.
Also keep the filter order intact when filtering the results against the
filter caps.
https://bugzilla.gnome.org/show_bug.cgi?id=763326
If we don't find the index of the sample correctly in src_convert function,
we have to unref about the qtdemux before returning value.
So, I have modify it about instead pass qtdemux as a parameter into
src_convert function.
https://bugzilla.gnome.org/show_bug.cgi?id=763973
Currently, get_duration function always return the TRUE even though
it can't be set duration correctly. So, we need to add the else condition
about the fail case. Also, we already set the GST_CLOCK_TIME_NONE
in this function. So I have modify it which is related code in some
function.
https://bugzilla.gnome.org/show_bug.cgi?id=763968
In other words, gst_pad_get_current_caps should never return NULL
in a pad-added callback from the demuxer.
Added tests for the two special cases with AAC and H.264 where this
would happen every time.
https://bugzilla.gnome.org/show_bug.cgi?id=763780
Changing the input caps and not using them anymore afterwards is useless, and
it breaks negotiation in pipelines like:
gst-launch-1.0 videotestsrc ! "video/x-raw,framerate=25/1,interlace-mode=interleaved" !
deinterlace fields=all ! "video/x-raw,framerate=50/1,interlace-mode=progressive" !
fakesink
This reverts commit 4065fcb80a.
flacparse should not push tags by itself, the base class is going to do that
while properly merging in upstream tags. It just didn't because of a bug in
the base class, which was hidden by this commit.
https://bugzilla.gnome.org/show_bug.cgi?id=763553
When upstream is running in bytes in push-mode, qtdemux will
convert seeks from time to bytes and send it upstream. Upstream
element will perform a byte seek and send a byte segment to qtdemux
that will convert it to time and push it downstream.
There is, however, the pending_segment variable that stores a new
segment event to be pushed before the next data. When handling seeks
as mentioned above this variable was being ignored and, if it contained
some segment event, it would override the one resulting from the seek.
This would restore a previous segment and would cause the seek segment
to be discarded downstream.
This patch fixes this issue by unrefing any pending segment as the
seek from upstream should contain the latest one that should be
used, as requested by the application.
https://bugzilla.gnome.org/show_bug.cgi?id=763165
On Windows the socket will be bound to ANY instead of the multicast group,
as binding to a multicast group does not work. Which would mean that we
override src->addr to become ANY and won't automatically join a multicast
group anymore on Windows.
On Linux we would automatically join a multicast group, keep it consistent.
https://bugzilla.gnome.org/show_bug.cgi?id=763093
Making the event itself writable is not enough, it won't make
the actual taglist in the event writable as well. Instead, just
make a copy of the taglist and then create a new tag event from
that if required, replacing the old one. Before we would
inadvertently modify taglists upstream elements might still
be holding on to. Add unit test for this as well.
https://bugzilla.gnome.org/show_bug.cgi?id=762793
In some cases the stream configuration can fail, for instance if the
stream is protected and no decryptor was found. For those situations
the demuxer shouldn't emit any data on the corresponding source pad of
the stream and bail out.
https://bugzilla.gnome.org/show_bug.cgi?id=762516
When the cenc metadata is stored outside of the moof box and the
stream is exposed it is possible that the cenc metadata hasn't been
processed yet while the first buffer is being pushed. When this
happens the buffer can't possibly be decrypted downstream so don't
push it.
https://bugzilla.gnome.org/show_bug.cgi?id=762516
