It's only relevant for each group, and by storing it in the group
we have locking and everything else like for the other buffering-related
variables. Locking looks a bit fishy still, but it was like that for a long
time already so shouldn't be worse than before.
Overview:
There are some of interleaved streams which has long-term location of audio data.
It mean the audio data is located far away more than multiqueue size.
In this case, because of multiqueue overrun, the pipeline is stopped.
To prevent hanging-like state, the decodebin needs to handle the queue size.
Caused:
The multiqueue size is not enough, the pipeline will stay being stalled status
and decodebin cannot complete to build decode chain.
In this issue file, decodebin did not receive no_more_pads signal or audio data yet.
Steps to Reproduce:
play the high-resolution(4K file) files or some streaming media(push mode).
Actual Results:
There is no audio or subtitle.
We can see only video or infinite loading.
Resolution:
Decodebin detect this problem, and add extra buffer size to multiqueue.
The multiqueue is larger than before, the next data can be pushed the downstream element.
Additional Information:
The max-preroll extra buffer size is set 8MB.
We can use total pre-roll buffer 10MB.
Only first overrun callback can handle multiqueue size.
https://bugzilla.gnome.org/show_bug.cgi?id=733235
When an upstream element wants to flush downstream, we need to take
all chains/groups into consideration.
To that effect, when a FLUSH_START event is seen, after having it
sent downstream we mark all those chains/groups as "drained" (as if
they had seen a EOS event on the endpads).
When a FLUSH_STOP event is received, we check if we need to switch groups.
This is done by checking if there are next groups. If so, we will switch
over to the latest next_group. The actual switch will be done when
that group is blocked.
https://bugzilla.gnome.org/show_bug.cgi?id=606382
When upstream events/queries reach sinkpads of unlinked groups (i.e.
no longer linked to the upstream demuxer), this patch attempts to find
the linked group and forward it upstream of that group.
This is done by adding upstream event/query probes on new group sinkpads
and then:
* Checking if the pad is linked or not (has a peer or not)
* If there is a peer, just let the event/query follow through normally
* If there is no peer, we find a pad to which to proxy it and return
GST_PROBE_HANDLED if it succeeded (allowing the event/query to be properly
returned to the initial called)
Note that this is definitely not thread-safe for the time being
https://bugzilla.gnome.org/show_bug.cgi?id=606382
deadend_details need not be returned when the pad is not a deadend.
Hence checking if res value is TRUE and clearing the string instead of
passing it on
https://bugzilla.gnome.org/show_bug.cgi?id=753088
When switching to a new chain it might be that this new chain
is not yet ready to be exposed so check it before exposing.
Can happen with mpegts that might delay adding pads or pushing data
until it has found the PMT/PAT/PCR and that may take a while depending
on the stream.
It happened frequently with HLS:
http://vevoplaylist-live.hls.adaptive.level3.net/vevo/ch1/appleman.m3u8
If the sink has properties named volume and mute, we have no idea about their
meaning. The streamvolume interface standardizes the meaning.
In the case of osxaudiosink for example, the current volume property has a
range of 0.0 to 1.0, but we need 0.0 to 10.0 or similar. Also osxaudiosink
has no mute property. As such, the volume element should be used here instead.
https://bugzilla.gnome.org/show_bug.cgi?id=752156
We reset the group start time to the running time of the start of the other
streams that are not flushed. This fixes seeking in gapless mode after the
first track has played.
https://bugzilla.gnome.org/show_bug.cgi?id=750013
If suburidecodebin is failed to negotiate (e.g file does not exist)
then free internal suburi variable so that 'current-suburi' property
returns correct status.
https://bugzilla.gnome.org/show_bug.cgi?id=751118
6a2f017bfa changed it to check the subtitle
factory caps if there is a text-sink but we fail to get its sinkpad. What
actually should be done here is to use the factory caps if there is no
text-sink at all.
https://bugzilla.gnome.org/show_bug.cgi?id=750785
There is the GstVideoMultiviewMode enum and the
GstVideoMultiviewFramePacking, which is a subset of the
multiview modes, with the same values as the corresponding
types from the full enum. Do some casts and use the right
times to avoid implicitly using/passing GstVideoMultiviewFramePacking
when a GstVideoMultiviewMode is needed.
Add GstVideoMultiviewFramePacking enum, and the
video-multiview-mode and video-multiview-flags
properties on playbin.
Use a pad probe to replace the multiview information in
video caps sent out from uridecodebin.
This is a part implementation only - for full
correctness, it should also modify caps in caps events,
accept-caps and allocation queries.
https://bugzilla.gnome.org/show_bug.cgi?id=611157
When traversing the color balance element channel list to find the one that
matches with the playsink proxy, the assignation was set to iterator of the
playsink proxy, not the balance element. Thus, the mapping to the values of
the balance element channel was wrong.
This patch fixes the assignation of the color balance element channel, so the
mapping to the channel of the color balance element is fixed.
https://bugzilla.gnome.org/show_bug.cgi?id=750691
when text playbin is not enabled in the beginning, then
video_srcpad_stream_synchronizer gets linked to videochain->sinkpad
and when we try to enable text bin during play, since it is already linked to videochain,
text chain does not get linked properly. Hence unlinking the same
before linking to text chain
https://bugzilla.gnome.org/show_bug.cgi?id=748908
This part of pipeline is:
tee name=t ! visualizationbin ! streamsynchronizer name=s
t. ! s.
streamsynchronizer might block and it could starve the visualization
branch of the pipeline when it is enabled.
The visualization bin has queues internally but the other branch
that links the audiotee directly to the synchronizer is vulnerable
to block. Adding a queue between "t. ! s." fixes deadlocks.
https://bugzilla.gnome.org/show_bug.cgi?id=749676
Upstream might want to use it to properly map timestamps to running/stream
times, if we just override it with 0 synchronization will be just wrong.
For this we remove some old 0.10 code related to segment accumulation, and
remove some more code that is useless now, and accumulate the group start time
(aka segment.base offset) manually now.
https://bugzilla.gnome.org/show_bug.cgi?id=635701
When shutting down the chain, we can get a deadlock when removing
a pad, if that chain was being busy streaming but blocked (eg, while
waiting for a queue to have free space).
https://bugzilla.gnome.org/show_bug.cgi?id=746480
If a new pad is added after playbin has been put to READY/NULL it
should ignore new pads as it is shutting down.
This can happen when the pipeline fails to preroll (is still in READY)
and the user gives up on waiting or an error that doesn't reach
the demuxer occurs (on some event handling) and it will continue to
work and exposing pads while playbin has been put to NULL.
Without this check an input-selector is created and set to PAUSED
state, preventing playbin from properly shutting down in case it
has data blocked inside it.
This fixes a race where the use-buffering property on a multiqueue was
set before the queue depth was changed from it's high preroll limits to
lower playback limits. This resulted in buffering messages being emitted
by the multiqueue in the short window between use-buffering being
set and the queue depth being reset.
https://bugzilla.gnome.org/show_bug.cgi?id=744308
The variables could have changed when the lock was released
to push a gap event. Streamsynchronizer needs to check them
again before going to sleep.
Bonus: fix a comment typo
When we modify a GList (via g_list_delete_link), always reassign the
new head to the original GList. Otherwise we end up with
filtered_errors being corrupt (the head might have been the element
removed)
This function is static, and only ever called with the expose lock
taken. It thus has no reason to take this lock itself.
This was introduced by one of my locking fixes from 741355.
https://bugzilla.gnome.org/show_bug.cgi?id=741355
Check if dbin->decode_chain is NULL before running drain_and_switch_chains()
because if it is, we shouldn't run that function or it will segfault.
CID #1271074