Vincent Penquerc'h
1e00fbdacb
opusdec: fix bogus assertion
2011-11-25 15:31:59 +00:00
Vincent Penquerc'h
32e9de842f
opus: pre-skip and output gain are little endian, remove reminder note
2011-11-24 13:40:34 +00:00
Vincent Penquerc'h
d38f4b8a09
opus: multichannel support
2011-11-24 13:40:34 +00:00
Vincent Penquerc'h
670c365400
opus: switch to multistream API
...
It's very similar to the basic API, and is a superset ot it,
which will allow encoding and decoding more than 2 channels.
2011-11-24 13:40:34 +00:00
Vincent Penquerc'h
e4ae3e89fa
opusdec: shuffle supported sample rates to favor 48000
2011-11-24 13:40:34 +00:00
Vincent Penquerc'h
d1d8cbad95
opusenc: remove useless setup field
2011-11-24 13:40:34 +00:00
Vincent Penquerc'h
5c8812f58c
opusdec: implement replay gain
...
It would ideally be better to leave this to a rgvolume element,
but we don't control the pipeline. So do it by default, and allow
disabling it via a property, so the correct volume should always
be output.
2011-11-23 14:03:30 +00:00
Vincent Penquerc'h
bfdda8e09a
opusdec: add in-band FEC support
...
This allows reconstruction of lost packets if FEC info is included
in the next packet, at the cost of extra latency. Since we do not
know if the stream has FEC (and this can change at runtime), we
always incur the latency, even if we never lose any frame, or see
any FEC information. Off by default.
2011-11-23 12:08:01 +00:00
Tim-Philipp Müller
2befc00dea
opusenc: mark properties changeable at runtime with GST_PARAM_MUTABLE_PLAYING
2011-11-22 20:27:50 +00:00
Vincent Penquerc'h
b226e8a085
opusenc: allow setting most properties at PLAYING time
...
Opus allows these to be changed during encoding, transparently
to the decoder.
2011-11-22 17:04:09 +00:00
Vincent Penquerc'h
ee723996db
opusenc: bound the bitrate to more sensible values
...
Go from the bounds mentioned in the spec, and allow some more
variation.
In particular, don't allow silly low bitrates, and allow reaching
the maximum useful bitrate.
2011-11-22 16:14:06 +00:00
Vincent Penquerc'h
bb39c86fdf
opusenc: fix crash on pathological parameters
...
Asking for 1 bit/s would select a 0 byte buffer, leading
to a crash. Buffer size is now controlled by a max-payload-size
property, which can't be less than 2.
2011-11-22 15:33:20 +00:00
Vincent Penquerc'h
5be77031ca
opus: move header magic testing to gstopusheader
2011-11-22 13:20:31 +00:00
Vincent Penquerc'h
354c7824aa
opusdec: skip pre-skip samples
2011-11-22 13:20:31 +00:00
Vincent Penquerc'h
1e81bc4b64
opusdec: read pre-skip from first header if available
2011-11-22 13:20:31 +00:00
Vincent Penquerc'h
fbfc870343
opusenc: reset tagsetter interface on stop
2011-11-21 12:02:28 +00:00
Vincent Penquerc'h
a6ca3673b4
opusdec: handle NULL packets (used for PLC)
2011-11-21 11:51:21 +00:00
Vincent Penquerc'h
de87d061fc
opusdec: light cleanup
2011-11-21 11:51:21 +00:00
Vincent Penquerc'h
95ae14f8b4
opusenc: do not push header buffers
...
Opus headers appear only when muxed in Ogg, so only place them
on the caps, where oggmux will find them, but other elements will
be blithely unaware of them.
2011-11-21 11:51:21 +00:00
Vincent Penquerc'h
7030b04f5e
opus: make opusparse set headers on caps
...
Header-on-caps code moved to a new shared location to avoid
duplicating the code.
2011-11-21 11:51:20 +00:00
Vincent Penquerc'h
efcd038346
opusenc: fix terminating NUL being written in signature
2011-11-19 15:59:53 +00:00
Vincent Penquerc'h
7c0c221fa4
opusenc: make frame-size an enum
...
It only supports a set number of specific values (including
a non integer one).
2011-11-19 15:59:52 +00:00
Vincent Penquerc'h
d2aba01428
opusenc: the encoder might not make use of all the bytes
2011-11-19 15:59:52 +00:00
Vincent Penquerc'h
ccc04a1529
opusenc: do not include variable fields in caps
...
Those can vary from one packet to the next, so have no reason
to be in the caps.
2011-11-16 18:51:16 +00:00
Vincent Penquerc'h
0031b48684
opusenc: fix constrained-vbr property name typo
2011-11-16 18:51:16 +00:00
Vincent Penquerc'h
656e1f8d9f
opusdec: let the base class handle all timing
2011-11-16 18:35:29 +00:00
Vincent Penquerc'h
8bb91f923f
opusparse: add opusparse element
...
A very simple element that parses Opus streams from the ad hoc
framing used by the Opus test vectors.
2011-11-16 17:58:15 +00:00
Vincent Penquerc'h
310daa5096
opusdec: allow negotiation of rate/channels with downstream
...
Since an opus stream may be decoded to any (sensible) rate,
and either stereo or mono, we try to accomodate downstream.
2011-11-16 17:45:00 +00:00
Vincent Penquerc'h
ffc4408d53
opusdec: rewrite logic
...
Parameters such as frame size, etc, are variable. Pretty much
everything can change within a stream, so be prepared about it,
and do not cache parameters in the decoder.
2011-11-16 17:45:00 +00:00
Vincent Penquerc'h
f978a60f38
opus: port to base audio encoder/decoder
2011-11-16 17:45:00 +00:00
Vincent Penquerc'h
545b87e14c
opusenc: fix bandwidth property type mismatch
2011-11-10 17:14:10 +00:00
Vincent Penquerc'h
2488107279
opusenc: fix latency query
...
This makes live 'audiosrc ! opusenc ! opusdec ! audiosink' pipelines
actually work without all audio being dumped.
https://bugzilla.gnome.org/show_bug.cgi?id=660999
2011-11-07 11:21:27 +00:00
Vincent Penquerc'h
ca14e2e061
opusenc: use debug level for debug info, not error
...
https://bugzilla.gnome.org/show_bug.cgi?id=660999
2011-11-07 11:21:27 +00:00
Vincent Penquerc'h
10a1f8395f
opusenc: fix calculation of filler data size
...
https://bugzilla.gnome.org/show_bug.cgi?id=660469
2011-11-07 11:21:26 +00:00
Vincent Penquerc'h
ab1d420f88
opusdec: fix decoding
...
A simple ... opusenc ! opusdec ... pipeline now works.
https://bugzilla.gnome.org/show_bug.cgi?id=660364
2011-10-03 11:21:37 +02:00
Vincent Penquerc'h
f70c921ff9
opusenc: moan if we get an unexpected amount of data
...
https://bugzilla.gnome.org/show_bug.cgi?id=660364
2011-10-03 11:21:24 +02:00
Vincent Penquerc'h
f9d4dd5215
opus: properly setup caps and init state from caps
...
https://bugzilla.gnome.org/show_bug.cgi?id=660364
2011-10-03 11:21:15 +02:00
Vincent Penquerc'h
495de129ff
opusenc: use the same frame size setup as the opus test code
...
https://bugzilla.gnome.org/show_bug.cgi?id=660364
2011-10-03 11:21:02 +02:00
Vincent Penquerc'h
24577fcf6d
opusdec: opus supports a select set of sampling rates
...
https://bugzilla.gnome.org/show_bug.cgi?id=660364
2011-10-03 11:20:52 +02:00
Vincent Penquerc'h
00a6c9ac64
opus: make it build against current, and remove cruft
...
https://bugzilla.gnome.org/show_bug.cgi?id=660364
2011-10-03 11:20:46 +02:00
David Schleef
1d33a3f18e
opus: duplicate from CELT
...
Copy the celt plugin and convert it to Opus. Mostly works.
2011-07-07 12:05:53 -07:00