Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_reset),
(gst_wavparse_other), (gst_wavparse_perform_seek),
(gst_wavparse_get_upstream_size), (gst_wavparse_stream_headers),
(gst_wavparse_add_src_pad), (gst_wavparse_stream_data),
(gst_wavparse_pad_query):
* gst/wavparse/gstwavparse.h:
Use information from 'fact' chunk for length calculation of compressed
samples. Calculate bps if bogus value is found in wav header (embeded
mp2/mp3).
Original commit message from CVS:
Patch by: Mark Nauwelaerts <manauw at skynet be>
* gst/wavparse/gstwavparse.c: (gst_wavparse_perform_seek):
Make sure we don't read beyond the end of the file (#345232).
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_peek_chunk_info),
(gst_wavparse_peek_chunk), (gst_wavparse_stream_headers),
(gst_wavparse_chain):
When operating chain-based, don't make any assumptions about the
chunking of the incoming data and make streaming work on days other
than the second Thursday after a full moon. Also fix up debug
messages here and there and make use of the most excellent new
gst_pad_query_peer_duration() utility function.
Skip any 'bext' chunks in front of the 'fmt ' chunk. Fixes#343837.
* gst/wavparse/gstwavparse.h:
Remove trailing comma after last enum value, some compilers don't
like that.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_fmt),
(gst_wavparse_perform_seek), (gst_wavparse_stream_headers):
Fix use of uninitialised values if we're NOT seeking in ready.
Fix typos.
Original commit message from CVS:
* ext\jpeg\smokecodec.c:
use of GST_DEBUG instead of DEBUG(a...) for WIN32
* ext\speex\gstspeexenc.c: (gst_speexenc_set_header_on_caps):
move first instruction after all variables declarations
* gst\alpha\gstalpha.c:
* gst\effectv\gstshagadelic.c:
* gst\smpte\paint.c:
* gst\videofilter\gstvideobalance.c:
define M_PI if it's not defined (it's not defined on WIN32)
* gst\cutter\gstcutter.c: (gst_cutter_chain):
* gst\id3demux\id3v2frames.c: (parse_relative_volume_adjustment_two):
* gst\level\gstlevel.c: (gst_level_set_property), (gst_level_transform_ip):
* gst\matroska\matroska-demux.c: (gst_matroska_demux_parse_info),
(gst_matroska_demux_video_caps):
* gst\matroska\matroska-mux.c: (gst_matroska_mux_start), (gst_matroska_mux_finish):
* gst\wavparse\gstwavparse.c: (gst_wavparse_stream_data):
use gst_guint64_to_gdouble for conversions
* gst\goom\filters.c: (setPixelRGB_):
fix a debug which was using undefined variable
* gst\level\gstlevel.c: (gst_level_set_caps), (gst_level_transform_ip):
* gst\matroska\ebml-read.c: (gst_ebml_read_sint):
replace LL suffix with L suffix (LL isn't supported by MSVC6.0)
* win32/vs6:
add vs6 projects files for most of plugins-good
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_get_upstream_size),
(gst_wavparse_stream_headers), (gst_wavparse_stream_data):
Don't try to read beyond the end of the file just because
the header claims a bigger size (like with truncated files).
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_perform_seek),
(gst_wavparse_stream_headers), (gst_wavparse_add_src_pad),
(gst_wavparse_stream_data), (gst_wavparse_loop):
* gst/wavparse/gstwavparse.h:
Delay source pad creation until we have the first chunk of
media data, so the we can examine the data and adjust the
caps accordingly if required. This makes playback of .wav
files with DTS-declared-as-PCM content work (#313266).
Original commit message from CVS:
Patch by: Tommi Myöhänen <ext-tommi dot myohanen at nokia dot com>
* gst/wavparse/gstwavparse.c: (gst_wavparse_perform_seek):
Fix block alignment calculation. Alignment should be done before
adding the byte offset where the data starts (#335231).
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_reset),
(gst_wavparse_change_state):
Implement seek in READY (re-fixes #327658)
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_perform_seek),
(gst_wavparse_stream_headers), (gst_wavparse_stream_data),
(gst_wavparse_pad_convert), (gst_wavparse_srcpad_event),
(gst_wavparse_sink_activate), (gst_wavparse_sink_activate_pull):
Use DEBUG_OBJECT more.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_stream_headers):
Pass extra_data to gst_riff_create_audio_caps(), so that
WAVEFORMATEX stuff works. Post audio codec name and post
it as taglist on the bus. Allow up to 8 channesl for raw
PCM in the source pad template caps.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_pad_convert):
Fix conversion from TIME to BYTES format (fixes#326864;
patch by: Tommi Myöhänen <ext-tommi dot myohanen at nokia dot com>)
Original commit message from CVS:
* gst/avi/gstavidemux.c: (gst_avi_demux_reset),
(gst_avi_demux_handle_src_event), (gst_avi_demux_parse_stream),
(gst_avi_demux_parse_odml), (gst_avi_demux_peek_tag),
(gst_avi_demux_next_data_buffer), (gst_avi_demux_stream_scan),
(gst_avi_demux_stream_header), (gst_avi_demux_loop):
Construct index for indexless files.
Make sure pad/buffers are correctly reset to NULL once we don't need
them anymore, else we get lovely segfaults/assertions.
* gst/wavparse/gstwavparse.c:
Yes, you can have 96KHz audio and wma in wav :(
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_reset),
(gst_wavparse_other), (gst_wavparse_perform_seek),
(gst_wavparse_stream_headers), (gst_wavparse_stream_data),
(gst_wavparse_loop), (gst_wavparse_pad_convert),
(gst_wavparse_srcpad_event), (gst_wavparse_sink_activate_pull):
* gst/wavparse/gstwavparse.h:
Use GstSegment to implement more seeking features.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_init),
(gst_wavparse_create_sourcepad), (gst_wavparse_sink_activate):
Use GST_DEBUG_FUNCPTR; add debug message in pad activate function.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_handle_seek),
(gst_wavparse_stream_headers), (gst_wavparse_stream_data),
(gst_wavparse_pad_convert), (gst_wavparse_srcpad_event):
Set stream time correctly in newsegment.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_handle_seek),
(gst_wavparse_stream_headers), (gst_wavparse_stream_data),
(gst_wavparse_pad_convert), (gst_wavparse_srcpad_event):
Fix for segment-start/stop API change.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_stream_headers),
(gst_wavparse_stream_data):
Add some fixes from 0.8 branch: allow 24/32bps songs and
blockalign samples to the header-specified size, if any
(#311070); error out on channels==0 or bitrate==0
(#309043, #304588).
Original commit message from CVS:
* configure.ac:
* gst/wavparse/gstwavparse.c:
* gst/wavparse/gstwavparse.h:
* gst/wavparse/Makefile.am:
Ported wavparse to 0.9 . Playing, seeking and state changes work.
Could need more loving on the headers though.
Original commit message from CVS:
* gst-libs/gst/riff/riff-media.c:
(gst_riff_create_audio_caps_with_data):
Do actually fix invalid RIFF fmt header values for alaw
and mulaw audio instead of just saying so.
* gst/wavparse/gstwavparse.c: (gst_wavparse_fmt):
Give gst_riff_create_audio_caps_with_data() a chance to
fix up broken format header fields before extracting any
parameters from the header. (fixes#167633)
Original commit message from CVS:
Reviewd by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
* gst/wavparse/gstwavparse.c: (gst_wavparse_fmt):
Fix memleak (#155223).
Original commit message from CVS:
* gst/wavparse/gstwavparse.c:
add ATRAC3 to STATIC CAPS to fix a warning
* gst/matroska/ebml-read.c:
* gst-libs/gst/riff/riff-read.c:
fix typos
Original commit message from CVS:
gstwavparse.c: it did not build in system with Glib < 2.4 because it
used the macro G_MAXUINT32. Now we define the macro if it is not yet
defined.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_class_init),
(gst_wavparse_stream_init), (gst_wavparse_fmt),
(gst_wavparse_other), (gst_wavparse_loop),
(gst_wavparse_pad_convert), (gst_wavparse_pad_query),
(gst_wavparse_srcpad_event):
* gst/wavparse/gstwavparse.h:
Added some more debugging info.
Fix the case where the length of the file is 0.
Make sure we seek to sample borders.
Original commit message from CVS:
Reviewed by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
* gst/wavparse/gstwavparse.c: (gst_wavparse_fmt):
Throw error if we didn't recognize the stream. Fixes#152289.
Original commit message from CVS:
Reviewed by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
* gst/wavparse/gstwavparse.c: (gst_wavparse_fmt):
Fix memleak.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_fmt),
(gst_wavparse_handle_seek), (gst_wavparse_srcpad_event):
Add the pad to the element after setting up the caps. This
makes it a lot easier to autoplug.
Original commit message from CVS:
Set the explicit caps on the pad when the file is parsed as explicit caps get wiped during state changes. fixes bug #148043
Original commit message from CVS:
* gst-libs/gst/riff/riff-media.c:
(gst_riff_create_video_caps_with_data):
mp42/mp43 (no caps) exist too.
* gst/matroska/matroska-demux.c: (gst_matroska_demux_video_caps):
Set pixel_width/height; we've got them in-caps.
* gst/typefind/gsttypefindfunctions.c: (plugin_init):
* gst/wavparse/gstwavparse.c: (plugin_init):
Both are valid primary.
* sys/oss/gstossmixer.c:
Remove i18n hack and enable translations.
Original commit message from CVS:
* ext/audiofile/gstafparse.c : change class to Codec/Demuxer/Audio
* gst/auparse/gstauparse.c : idem
* gst/wavparse/gstwavparse.c : idem
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_destroy_sourcepad),
(gst_wavparse_create_sourcepad):
make PAUSED=>READY=>PAUSED=READY work by not destroying NULL
sourcepads
Original commit message from CVS:
Rewrote wavparse to use riff-read instead of doing bytestream stuff by hand.
Made some useful functions in riff-read non-static.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_create_sourcepad),
(gst_wavparse_parse_fmt), (gst_wavparse_handle_sink_event),
(gst_wavparse_loop):
Missing variable initialization. Add handling of DVI ADPCM. Fix
mis-parsing of LIST chunks. This works around a bug where we mis-
parse non-aligning LIST chunks (so LIST chunks where the contents
don't align with the actual LIST size). The correct fix is to use
rifflib, I'm not going to fix wavparse - too much work. All this
fixes#104878.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_init),
(gst_wavparse_destroy_sourcepad), (gst_wavparse_create_sourcepad),
(gst_wavparse_parse_fmt), (gst_wavparse_change_state):
Hack to make wavparse work with spider (always -> sometimes pad).
Fixes#135862 && #140411.
Original commit message from CVS:
reviewed by: <delete if not using a buddy>
* gst-libs/gst/riff/riff-media.c:
(gst_riff_create_video_caps_with_data),
(gst_riff_create_video_caps), (gst_riff_create_audio_caps),
(gst_riff_create_video_template_caps),
(gst_riff_create_audio_template_caps):
* gst-libs/gst/riff/riff-media.h:
* gst-libs/gst/riff/riff-read.c:
(gst_riff_read_strf_vids_with_data), (gst_riff_read_strf_vids):
* gst-libs/gst/riff/riff-read.h:
* gst/avi/gstavidemux.c: (gst_avi_demux_add_stream):
Add MS RLE support. I added some functions to read out strf chunks
into strf chunks and the data behind it. This is usually color
palettes (as in RLE, but also in 8-bit RGB). Also use those during
caps creation. Lastly, add ADPCM (similar to wavparse - which
should eventually be rifflib based).
* gst/matroska/matroska-demux.c: (gst_matroska_demux_class_init),
(gst_matroska_demux_init), (gst_matroska_demux_reset):
* gst/matroska/matroska-demux.h:
Remove placeholders for some prehistoric tagging system. Didn't add
support for any tag system really anyway.
* gst/qtdemux/qtdemux.c:
Add support for audio/x-m4a (MPEG-4) through spider.
* gst/wavparse/gstwavparse.c: (gst_wavparse_parse_fmt),
(gst_wavparse_loop):
ADPCM support (#135862). Increase max. buffer size because we
cannot split buffers for ADPCM (screws references) and I've seen
files with 2048 byte chunks. 4096 seems safe for now.
Original commit message from CVS:
* ext/aalib/gstaasink.c: (gst_aasink_fixate), (gst_aasink_init):
Add fixate function. (bug #131128)
* ext/sdl/sdlvideosink.c: (gst_sdlvideosink_init),
(gst_sdlvideosink_fixate): Add fixate function.
* gst/audioconvert/gstaudioconvert.c: (gst_audio_convert_link):
Fix attempt to print a non-pointer using GST_PTR_FORMAT.
* gst/wavparse/gstwavparse.c: (gst_wavparse_parse_fmt):
Fix missing break that was causing ulaw to be interpreted as
raw int.
Original commit message from CVS:
* ext/esd/esdsink.c: (gst_esdsink_class_init): Remove property
that handles osssink fallback.
* gst/audioconvert/gstaudioconvert.c: (gst_audio_convert_init),
(gst_audio_convert_getcaps):
* gst/qtdemux/qtdemux.c: (qtdemux_audio_caps):
Add audio/x-qdm2 for QDM2 audio.
* gst/sine/gstsinesrc.c: (gst_sinesrc_get):
* gst/sine/gstsinesrc.h: Add example of how to implement tags.
* gst/videoscale/gstvideoscale.c: (gst_videoscale_getcaps):
Decrease minimum size to 16x16.
* gst/wavparse/gstwavparse.c:
Convert disabled pad template caps to new caps.
* sys/ximage/ximagesink.c: (gst_ximagesink_xcontext_get):
* sys/xvimage/xvimagesink.c: (gst_xvimagesink_xcontext_get),
(gst_xvimagesink_chain): Throw element error when display cannot
be opened. Increase minimum framerate to 1.0. Check the data
free function on a buffer to make sure it is the type we expect
before manipulating it.
Original commit message from CVS:
2004-01-14 Ronald Bultje <rbultje@ronald.bitfreak.net>
* ext/divx/gstdivxdec.c:
* ext/divx/gstdivxenc.c:
Set category to divx4linux instead of divx (too generic).
* gst/wavparse/gstwavparse.c: (gst_wavparse_init),
(gst_wavparse_parse_fmt), (gst_wavparse_handle_sink_event),
(gst_wavparse_loop), (gst_wavparse_change_state):
* gst/wavparse/gstwavparse.h:
fix parsing of WAV files with non-standard fmt-tag size and fix
skipping of unrecognized chunks... Someone please fix this thing
to use rifflib so all this is automated.
* sys/v4l/Makefile.am:
* sys/v4l2/Makefile.am:
Add X_CFLAGS because we depend on X (for overlay).
Original commit message from CVS:
2004-01-04 Ronald Bultje <rbultje@ronald.bitfreak.net>
* gst/matroska/matroska-demux.c:
Fix EBML-laced block parsing. Diffs are relative to previous
lace, not the first lace. Thanks to Mosu from the Matroska
team for detecting this.
(gst_matroska_demux_parse_blockgroup):
* gst/wavparse/gstwavparse.c: (gst_wavparse_init),
(gst_wavparse_parse_fmt), (gst_wavparse_getcaps),
(gst_wavparse_handle_sink_event), (gst_wavparse_loop),
(gst_wavparse_change_state):
* gst/wavparse/gstwavparse.h:
Quickfix for capsnego.
Original commit message from CVS:
Sorry Dave... Add mpegversion=1 to mp3 caps everywhere so that the autoplugger uses mad and not faad for mp3 decoding. This should fix mp3 playback.
Original commit message from CVS:
Add a local copy of riff.h as we don't use rifflib anymore.
Rewrite the main loop to use bytestreams instead of rifflib. Make it a loopbased
filter.
Handle metadata, cues and labels as well
Original commit message from CVS:
merge TYPEFIND branch. Major changes:
- totally reworked type(find) system
- all typefind functions are in gst/typefind now
- more typefind functions then before
- some plugins might fail to compile now because I don't have them installed and they
a) require bytestream or
b) haven't had their typefind fixed.
Please fix those plugins and put the typefind functions into gst/typefind if they don't have dependencies
Original commit message from CVS:
Add a parser for metadata
(demux_metadata): Given the buffer containing the metadata, look through it and
get the info out of it.
(wav_new_chunk_callback): Change the if statement to a switch statement.
Handle GST_RIFF_TAG_LIST by changing what the type of list it is and parsing out
metadata if it is "INFO".
Original commit message from CVS:
New typefind system:
* bytestream is now part of the core
* all plugins have been modified to use this new typefind system
* asf typefinding added
* mpeg video stream typefiding removed because it's broken
* duplicate typefind entries removed
* extra id3 typefinding added, because we've seen 4 types of files
(riff/wav, flac, vorbis, mp3) with id3 headers and each of these needs
to work. Instead, I've added an id3 element and let it redo typefiding
after the id3 header. this needs a hack because spider only typefinds
once. We can remove this hack once spider supports multiple typefinds.
* with all this, mp3 typefinding is semi-rewritten
* id3 typefinding in flac/vorbis is removed, it's no longer needed
* fixed spider and gst-typefind to use this, too.
* Other general cleanups
Original commit message from CVS:
New mimetypes gone into effect today - this commit changes all old mimetypes over to the new mimetypes spec as described in the previous commit's document. Note: some plugins will break, some pipelines will break, expect HEAD to be broken or at least not 100% working for a few days, but don't forget to report bugs
Original commit message from CVS:
compatibility fix for new GST_DEBUG stuff.
Includes fixes for missing includes for config.h and unistd.h
I only ensured for plugins I can build that they work, so if some of them are still broken, you gotta fix them yourselves unfortunately.
