Add a method to perform get_range typefinding that also uses the
uri/location extension as an extra hint. It will first try to call the
typefind functions of the factories that handle the given extension. The result
is that in the common case, we only call one typefind function, which speeds up
the typefinding a lot.
Include unistd.h so that _POSIX_VERSION is actually defined when
it should be defined. Without that, stuff like fail_if(1) doesn't
actually fail, presumably because other parts of the code do include
unistd.h and then have _POSIX_VERSION defined.
Fixes#604565 even more.
Make sure we take ownership of the buffer early without increasing its refcount
when we go in the collect function. This reduces the amount of copies needed in
order to make the buffer writable in most cases.
In some cases we can avoid allocating a subbuffer and instead simply ref
the buffer. Callers should perform _make_metadata_writable() in all
cases now.
Add a method to install a clipping function that is called when a buffer is
received. Users of collectpads can then perform clipping on the incomming
buffers.
Also retab the header file a little.
See #590265
This allows demuxers to update the segment stop of an already
finished stream. This might be needed if some stream goes to
EOS before the duration of the longest stream is known to properly
set the segment stop of all streams to the same value in the end.
Set the pad flushing and stop the pad task when the initial seek fails
during activation. Avoids racy calls into the _create() function when
BaseSrc::stop() has already run.
Fixes: #603059
Also, fix some misspelled comments.
Rounding errors with the floating point rate could make it so that we
don't end up exactly at the required stepping duration.
Use the segment clipping boundaries, which are not subject to rate
adjustements, instead to detect when we reached the stepping duration.
Add some debug info related to going to the PAUSED state.
Some gcc versions warn about bytewriter writing to memory accessed
via a const guint8 pointer, despite our explicit cast to guint8 *.
Work around that by using an intermediary variable.
Fixes#598526.
When clamping the base time, correctly use 'now', instead of
'-now' - the intent is to prevent 'now-base' ever being
negative, which would cause a position report outside the segment.
Fixes: #602419
[A-Z] regexp fails under et_EE locale because Z in Estonian alphabet is
located after S and therefore characters starting with 'TUV...' are not
in the range anymore.
Fixes bug #602093.
and install into a different directory $(libexecdir/gstreamer-0.10) so that
everything is versioned properly.
NOTE: run 'make clean' after updating; if you are running an uninstalled setup,
you will need to update your gst-uninstalled script (unless it's symlinked
to gstreamer core master) and exit/enter your uninstalled environment to get
the updated environment. If you are running an installed setup, you should
run 'make uninstall' before merging this change or remove the old
plugin-scanner binary manually.
Fixes#601698.
Element base_time is a signed quantity, which leads to basesink returning
a position of 0 when dealing with a negative base time - which are quite
legal when clocks (such as the audio clock) are close to 0.
This doesn't manifest in normal pipelines, of course - but can happen
(at least) when manually setting the base time on a pipeline.
This avoids:
* triple-checking for the GType when type-checking is enabled (see #597260)
* Avoids going through an expensive no-argument checking which landed in
glib-2.22
* Avoids going through 2 extrac functions (g_object_new -> g_object_new_valist)
There's not much point in using GST_DEBUG_FUNCPTR with GObject
virtual functions such as get_property, set_propery, finalize and
dispose, since they'll never be used by anyone anyway. Saves a
few bytes and possibly a tenth of a polar bear.
This avoids having to do the sorting everytime we use typefind
The behaviour of gst_type_find_factory_get_list has subtlely changed
in the sense that the order was previously undefined, whereas now
it returns them sorted by rank and then by name.
Use g_slide instead of nomal g_new, Also don't init struct with 0 as we need to
init it anyway with the real values.
Also join the 3 flags checks into one.
The list against which we run the comparefunc will only contain
GstPluginFeature, therefore remove the 6 expensive type checks we do
for every single comparision.
When we quickly switch from PLAYING to PAUSED and back to PLAYING it's possible
in some cases that the task refuses to start, This is because when we go to
PAUSED, we unschedule the clock timeout, which could return UNSCHEDULED when
we're back to PLAYING, causing the task to PAUSE again with a wrong-state.
This patch checks if we are running when we return with an UNSCHEDULED return
value and if we are, try to create a new buffer.
Fixes#597550
The code was previously:
* checking if ret was != OK
* .. but if it was FLOW_STEP, swith it to OK
* .. and then not using ret
Instead we just make it more compact by checking if it's OK or STEP.
In most places in core and baseclasses we just need the caps to do caps-
intersections. In that case ref'ed caps are enough (no need to copy).
This patch also switches the code to use the new functions.
API: gst_pad_get_caps_refed(), gst_pad_peer_get_caps_refed()
The normal functions are always useful to have for bindings, especially
runtime-created bindings like Seed or new GObject-Introspection based
Python bindings.
Add a simple version check when starting the plugin-scanner so we can
verify we're talking to one that talks the same language.
First try a plugin-scanner in the installed path, then try one via the
GST_PLUGIN_SCANNER env var if that doesn't work.
Update the uninstalled script.
Install the plugin-scanner to the libexec dir
Apparently the sed that ships on Solaris 10 doesn't support character
classes like [:alnum:], so don't use them. We don't need them for the
symbol names that are being extracted anyway.
Also, use $(SED) instead of 'sed'
Fixes: #596877
This fixes many unit tests under valgrind that shows
leaking GstTasks that are not really leaked but just
not unreffed by the task thread before the unit test
stopped.
Fixes bug #591045.
For some people the build of libgstcheck was broken because the make
target that creates the internal-check.h file wasn't executed for
some reason. This should hopefully fix this.
Check when we need to touch the metadata of the output buffer after selecting
the output buffer so that we have everything in one place.
Also take flags and timestamp modifications into account.
When we have the same input as output caps, reuse the input caps object. After
the caps refcounting has been sorted out now, we can finally enable this
optimisation.
Without this, we risked:
* Checking the flushing state on an unexisting list
* Not setting the flushing state on pads that had just been added
Partially fixes#590056
There's no need to have GstStreamConsistency in a public header for
the time being, so make it private. While we're at it, add a gtk-doc
blurb for it though. Re-fixes #588744.
Return FALSE in basesrc's default query handler when we get a SEEKING query for
a format that's not the one the source operates in. Previously (ie. before, in
the git version) we would return TRUE in that case and seekable=FALSE, which
is more correct, but causes backwards compatibility problems. (Before that
we would change the format of the query when answering, which was completely
broken since callers don't expect that or check for it). Since the SEEKING
query is a fairly recent addition, not all demuxers, parsers and decoders
implement it yet, in which case any SEEKING query by an application will
just be passed upstream where it will then be handled by basesrc. Now, if
e.g. totem does a SEEKING query for TIME format and we have a demuxer that
doesn't implement the query, basesrc would answer it with seekable=FALSE in
most cases, and totem can only take that as authoritative answer, not knowing
that the demuxer doesn't implement the SEEKING query. To avoid this, we make
basesrc return FALSE to SEEKING queries in unhandled formats. That way
applications like totem can fall back on assuming seekability depending on
whether a duration is available, or somesuch. Downstream elements doing
such queries are likely to equate an unhandled query with a non-seekable
response as well, so this should be an acceptable fix for the time being.
See #584838, #588944, #589423 and #589424.
Clarify byte reader docs a bit: offset is relative to the current
position of the reader, not to the start of the data. Also, the
examples in both the adapter docs and the byte reader docs have
the mask and pattern arguments swapped (see #587561). Spotted
by Carl-Anton Ingmarsson.
Add a pattern scan function similar to the one recently added to
GstAdapter, and a unit test (based on the adapter one).
Fixes#585592.
API: add gst_byte_reader_masked_scan_uint32()
Update design doc with step-start docs.
Add eos field to step done message
when stepping in reverse, update the segment time field.
Flush out the current step when we are flushing.
When we start stepping, store the start/stop values of the segment before we
install new start/stop values for clipping in non-flushing steps.
for non-flushing steps, update the element start time. For flushing steps, it
does not change because running_time does not advance
Make sure we always perform the stop_stepping operations even when we drop
frames.
Note in the docs that a flushing step in PLAYING brings the pipeline to the lost
state and skips the data before prerolling again.
Implement the flushing step correctly by invalidating the current step
operation, which would activate the new step operation.
When a subclass is blocking in _wait_preroll() in the _render method, make sure
we can unlock the subclass and detect this return value from the render method.
Update framestep document, we want to pass the flush flag in the step-done
message.
Add flush flag to the gstmessage.
Update examples to use the new step-done message api.
Implement framestep with playback rates < 0.0 too.
Make start and stop_stepping methods and move their invocation in the right
places.
Perform the atual stepping operation where we have full context about the
timestamps.
Unlock the prerolled frame and recheck if we need to step.
Keep a simple counter for the frames we're about to skip while stepping and
preroll/post step_done when stepping finished.
gst_adapter_masked_scan_uint32 could return values smaller than offset
if the first byte(s) of the mask are 0 and the pattern matches the
beginning of the adapter.
Added examples to documentation of gst_adapter_masked_scan_uint32().
Also added some more masked boundary tests.
Fixes#584118
Fix a warning that occurs when the self->priv->values is NULL and
the code tries to retrieve an iterator from it. The warning was showing
up in the checks for the volume element.
Add a reasonably optimized new gst_adapter_masked_scan_uint32() function
to scan the adapter for a pattern after applying a mask.
Add some unit tests.
API: GstAdapter::gst_adapter_masked_scan_uint32()
Fixes#583187
Don't use realloc to grow the scratch area because we don't want the memcpy the
old useless data into the new area before we write our new stuff in it.
When a are requested to take a buffer from the adapter that is exactly the
headbuffer, don't make a subbuffer of it but return that head buffer.
Add a unit-test for this new optimisation.
Due to a typo basesink didn't do any emergency rendering of late buffers
if the only buffer ever rendered was the first one with timestamp 0. This
means that in cases where the decoder is very very slow, we'd never see
any buffers but the very first one rendered. Fixes#576381.
When generating arrays of control changes timestamp variable was used instead
the local ts variable that we increment when stepping through the array.
Pointed out by Martin Pokorny.
When we are not ready to handle a latency query (we are not yet prerolled) we
also don't try to forward the latency event because that might cause unexpected
errors when upstream is not yet linked.
Fix a regression introduced by fix for #567725 in commit
1c7ab4ed4f. We should only call the preroll
function once namely when we did not yet commit the state change.
Add a unit test to check that we call the preroll function when interrupting the
clock_wait (see #567725).
Add a unit test to check that we only call the preroll function once.
While reconfiguring a basetransform element we need also to recheck
the alloc request. Because it's possible that due to caps changes
the proxy_alloc state is not correct anymore.
(Re-commit after discusion with Wim on IRC)
