For shared media we got race conditions. Concurrently rtsp clients might
suspend or unsuspend the shared media and thus change the state without
the clients expecting that.
By introducing a lock that can be taken by callers such as rtsp_client
one can force rtsp clients calling, eg. PLAY, SETUP and that uses shared media,
to handle the media sequentially thus allowing one client to finish its
rtsp call before another client calls on the same media.
https://gitlab.freedesktop.org/gstreamer/gst-rtsp-server/issues/86Fixes#86
Extra time to add to the timeout, in seconds. This only
affects the time until a session is considered timed out
and is not signalled in the RTSP request responses.
Only the value of the timeout property is signalled in the
request responses.
If one thread is inside the send_tcp_message function and are done
sending rtp or rtcp messages so the n_outstanding variable is zero
however have not exit the loop sending the messages. While sending its
messages, transports have been added or removed to the transport list,
so the cache should be updated. If now an additional thread comes to
the function send_tcp_message and trying to send rtp messages it will
first destroy the rtp cache that is still being iterated trough by the
first thread.
Fixes#81
When unsuspending and going to PLAYING, unblock all streams instead of
only those that are linked (the linked streams are the ones for which
SETUP has been called). GST_FLOW_NOT_LINKED will be returned when
pushing buffers on unlinked streams.
This change is because playback using single-threaded demuxers like
matroska-demux could be blocked if SETUP was not called for all media.
Demuxers that use GstFlowCombiner (including gstoggdemux, gstavidemux,
gstflvdemux, qtdemux, and matroska-demux) will handle
GST_FLOW_NOT_LINKED automatically.
Fixes#39
Wait on asyn-done when needed in gst_rtsp_media_seek_trickmode.
In the unit test the pause from adjust_play_mode will cause a preroll
and after that async-done will be produced.
Without this patch there are no one consuming this async-done and when
later when seek fluch is done in gst_rtsp_media_seek_trickmode then it
wait for async-done. But then it wrongly find the async-done prodused by
adjus_play_mode and continue executing without waiting for the preroll
to finish.
Change condition that should be fulfilled regarding RTPInfo.
Replace !gst_rtsp_media_is_receive_only with
gst_rtsp_media_has_completed_sender. It is more correct to actually look
for a sender pipeline that is complete. Only then a RTPInfo should
exist.
gst_rtsp_media_is_receive_only gives different answears depending on
state of server.
If Describe is called wth URL+options for backchannel SDP will give only
audio and only backchannel a=sendonly
If Describe is called on URL+options that gives both audio and video
direction from server to client, pipelines are created. Thus
receive_only will return false, even though Setup only would setup
backchannel.
RTP-Info is only for outgoing streams. Thus one should look if outgoing
streams are complete.
If RTP Info is missing and it is not a receiver only, eg. audio
backchannel. Then return GST_RTSP_STS_INTERNAL_SERVER_ERROR.
In rfc2326 it says RTP-info is req. but in RFC7826 it is conditional.
Since 1.14 there is audio backchannel support. Thus RTP-info is
conditional now. When audio backchannel only mode, there is no RTP-info.
Fixes#82
Without this patch it's always stream0 that is used to get segment event
that is used to set scale and speed. This even if client not doing SETUP
for stream0. At least in suspend mode reset this not working since then
it's just random if send_rtp_sink have got any segment event. There are
no check if send_rtp_sink for stream0 got any data before media is
prerolled after PLAY request.
We then pass those to adjust_play_mode, which needs to operate
on the "final" seek flags, as previously the code in rtsp-media
was assuming that accuracy seek flags (accurate / key_unit) should
not be set if the flags passed to the seek method were already set.
First try "pay", then "pay_%s" (where %s == pad name). And only then
fall back to the code that simply takes the first payloader that is
found.
The current code usually works (but is racy) because it will always take
the payloader that was last added (due to g_list_prepend() when adding
elements) in pad-added and that's usually the correct one. But if a new
payloader is added between pad-added and us trying to get it, we would
get the wrong payloader.
Without this patch there are problem pre-rolling when using audio back
channel.
Without this patch a probe will be created for all streams including
the stream for audio backchannel. To pre-roll all this pads have to
receive data. Since the stream for audio backchannel is a receiver this
will never happen.
The solution is to never create any probes for streams that are for
incomming data and instead set them as blocking already from beginning.
The recent ONVIF work exposed a race condition when dealing with
multiple streams: one of the sinks may preroll before other streams
have started flushing. This led to the pipeline posting async-done
prematurely, when some streams were actually still in the middle
of performing a flushing seek. The newly-added code looks up a
sticky segment event on the first stream in order to respond to
the PLAY request with accurate Scale and Speed headers. In the
failure condition, the first stream was flushing, and thus had
no sticky segment event, leading to the PLAY request failing,
and in turn the test.
This will be used in the onvif tests in order to validate the
data transmitted over TCP: for streaming to continue after a
data message has been provided to client->send_func, the client
is responsible for marking the message as sent on the relevant
stream transport.
GStreamer plays segment from stop to start when doing reverse playback.
RTSP implies that media should be played from start of Range header to
its stop. Hence we swap start and stop times before passing them to
gst_element_seek.
Also make gst_rtsp_stream_query_stop always return value that can be
used as stop time of Range header.
Add support for the RTSP Scale and Speed headers by setting the rate in
the seek to (scale*speed). We then check the resulting segment for rate
and applied rate, and use them as values for the Speed and Scale headers
respectively.
https://bugzilla.gnome.org/show_bug.cgi?id=754575
Adds a new virtual function, adjust_play_mode(), that allows
sub classes to adjust the seek done on the media. The sub class can
modify the values of the the seek flags and the rate.
https://bugzilla.gnome.org/show_bug.cgi?id=754575
Add new function gst_rtsp_media_seek_full_with_rate() which allows the
caller to specify the rate for the seek. Also added functions in
rtsp-stream and rtsp-media for retreiving current rate and applied rate.
https://bugzilla.gnome.org/show_bug.cgi?id=754575
Add functionality to limit the Content-Length.
API addition, Enhancement.
Define an appropriate request size limit and reject requests
exceeding the limit with response status 413 Request Entity Too Large
Related to !182
If not waiting for free thread pool before clean transport caches, there
can be a crash if a thread is executing in transport list loop in
function send_tcp_message.
Also add a check if priv->send_pool in on_message_sent to avoid that a
new thread is pushed during wait of free thread pool. This is possible
since when waiting for free thread pool mutex have to be unlocked.
Handle the situation when a call to gst_rtsp_media_set_state is done
when media status is preparing.
Also add unit test for this scenario.
The unit test simulate on a media level when two clients share a (live)
media.
Both clients have done SETUP and got responses. Now client 1 is doing
play and client 2 is just closing the connection.
Then without patch there are a problem when
client1 is calling gst_rtsp_media_unsuspend in handle_play_request.
And client2 is doing closing connection we can end up in a call
to gst_rtsp_media_set_state when
priv->status == GST_RTSP_MEDIA_STATUS_PREPARING and all the logic for
shut down media is jumped over .
With this patch and this scenario we wait until
priv->status == GST_RTSP_MEDIA_STATUS_PREPARED and then continue to
execute after that and now we will execute the logic for
shut down media.
This adds new functions for passing buffer lists through the different
layers without breaking API/ABI, and enables the appsink to actually
provide buffer lists.
This should already reduce CPU usage and potentially context switches a
bit by passing a whole buffer list from the appsink instead of
individual buffers. As a next step it would be necessary to
a) Add support for a vector of data for the GstRTSPMessage body
b) Add support for sending multiple messages at once to the
GstRTSPWatch and let it be handled internally
c) Adding API to GOutputStream that works like writev()
Fixes https://gitlab.freedesktop.org/gstreamer/gst-rtsp-server/issues/29
The close handler could trigger a crash because it invalidated the
watch_context while still leaving a source attached to it which would be
cleaned up at a later point.
The previous fix for race condition around finish_unprepare where the
function could be called twice assumed that the status wouldn't change
during execution of the function. This assumption is incorrect as the
state may change, for example if an error message arrives from the
pipeline bus.
Instead a flag keeping track on whether the finish_unprepare function
is currently executing is introduced and checked.
Fixes https://gitlab.freedesktop.org/gstreamer/gst-rtsp-server/issues/59
In plug_src we changed the element state before adding it to
the owner container. This prevented the pipeline from intercepting
a GST_STREAM_STATUS_TYPE_CREATE message from the pad in order
to assign a custom task pool.
Fixes https://gitlab.freedesktop.org/gstreamer/gst-rtsp-server/issues/53
Media is considered to be blocked when all streams that belong to
that media are blocked.
This patch solves the problem of inconsistent updates of
priv->blocked that are not synchronized with the media state.
Before the seek operation is performed on media, it's required that
its pipeline is prepared <=> the pipeline is in the PAUSED state.
At this stage, all transport parts (transport sinks) have been successfully
added to the pipeline and there is no need for blocking the streams.
The sequence number in the rtpinfo is supposed to be the first RTP
sequence number. The "seqnum" property on a payloader is supposed to be
the number from the last processed RTP packet. The sequence number for
payloaders that inherit gstrtpbasepayload will not be correct in case of
buffer lists. In order to fix the seqnum property on the payloaders
gst-rtsp-server must get the sequence number for rtpinfo elsewhere and
"seqnum-offset" from the "stats" property contains the value of the
very first RTP packet in a stream. The server will, however, try to look
at the last simple in the sink element and only use properties on the
payloader in case there no sink elements yet, and by looking at the last
sample of the sink gives the server full control of which RTP packet it
looks at. If the payloader does not have the "stats" property, "seqnum"
is still used since "seqnum-offset" is only present in as part of
"stats" and this is still an issue not solved with this patch.
Needed for gst-plugins-base!17
