Don't signal a pipeline error when processing incomplete
j2pk PES packets that are too small. That can happen normally
during a DISCONT and shouldn't shut down the whole pipeline
Remove some custom and incomplete seek calculation
logic in favour of gst_segment_do_seek(), and
short-circuit any actual seeking or recalculation
if the position didn't change and just send an updated
segment directly.
This removes the custom seeking logic in favour of
using standard core seek handling.
The default behaviour of rtponviftimestamp is to drop buffers
outside the segment. This creates obvious problems for reverse
playback.
The ONVIF specification unfortunately doesn't describe how to handle
that specific use case, but we can expose a property to let the
user disable the dropping behaviour, and forward these buffers with
a G_MAXUINT64 ONVIF timestamp.
Also modify rtponvifparse to handle such timestamps appropriately.
We reject caps with other framerates as it's impossible to generate
timecodes unless we actually know a constant framerate. Reflect this
also in the pad template caps.
Instead of using a static hardcoded PCR interval, allow the user
to configure it.
Also revert back the default to a 40 ms interval, that was changed
in recent patches for no good reason.
There's no point in working with invalid LTC timestamps as all future
calculations will be wrong based on this, and invalid LTC timestamps can
sometimes be read via the audio input.
This patch just enforces boudaries for the access to the
standard_deviation array (64 floats). Such case can be
seen with a corrupted stream, where there's no hope to
obtain a valid decoded frame anyway.
https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/issues/1002
The D bit is meant to be set whenever there is a discontinuity
in transmission, and directly maps to the DISCONT flag.
The E bit is not meant to be set on every buffer preceding a
discontinuity, but only on the last buffer of a contiguous section
of recording. This has to be signaled through the unfortunately-named
"discont" field of the custom NtpOffset event.
Based on a patch by
Georg Lippitsch <glippitsch@toolsonair.com>
Vivia Nikolaidou <vivia@toolsonair.com>
Using libltc from https://github.com/x42/libltc
We now have a single property to select the timecode source that should
be applied, and for each timecode source the timecode is updated at
every frame. Then based on a set mode, the timecode is added to the
frame if none exists already or all existing timecodes are removed and
the timecode is added.
In addition the real-time clock is considered a proper timecode source
now instead of only allowing to initialize once in the beginning with
it, and also instead of just taking the current time we now take the
current time at the clock time of the video frame.
The SPS parsing functions take a parse_vui_param flag
to skip VUI parsing, but there's no indication in the output
SPS struct that the VUI was skipped.
The only caller that ever passed FALSE seems to be the
important gst_h264_parser_parse_nal() function, meaning - so the
cached SPS were always silently invalid. That needs changing
anyway, meaning noone ever passes FALSE.
I don't see any use for saving a few microseconds in
order to silently produce garbage, and since this is still
unstable API, let's remove the parse_vui_param.
Fix a recently introduced segfault. Don't de-reference a NULL
SPS pointer when attempting to update source caps before SPS
has been seen in the stream.
Interleaved frames can be fragmented between
incoming frames. Thus, we can have multiple
frames within the single input frame, as well as
incomplete frame. Now it preserves parsing
state and handle both situations.
Fixes#991
The length of the TCP payload is the IP plus TCP header length
subtracted from the IP datagram length specified in the IP header.
Prior to this, the size was calculated incorrectly, considering
all data after TCP header as a payload till the end of a packet.
Fixes#995
If recording is set to FALSE after the last audio or video buffer and
before the EOS event then recording stop is never signalled.
Similarly, we should signal recording stop once both audio and video are
EOS, regardless of the recording property, as there's nothing to be
recorded anymore.
We generally always prefer the information from upstream for other
metadata (pixel-aspect-ration, etc.) and should also do so here.
Other parsers (h264parse) already do the same.
When sps parsing fails we use a fallback sps from the caps, since we
have got an sps we need to update parser state and header as in the case the
sps was successfully parsed
When sps parsing fails we use a fallback sps from the caps, since we
have got an sps we need to update parser state and header as in the case the
sps was successfully parsed
Closes#503
Set more unhandled flags to general_constraint_indicator_flags field.
The field is required for building "Codecs" parameter as defined
ISO/IEC 14496-15 Annex E. The resulting "Codecs" string might be used
in various places (e.g., HLS/DASH manifest, browser, player, etc)
This is a re-implementation of the RTP elements that are submitted in
2013 to handle RTP streams. The elements handle a correct connection
for the bi-directional use of the RTCP sockets.
https://bugzilla.gnome.org/show_bug.cgi?id=703111
The rtpsink and rtpsrc elements add an URI interface so that streams
can be decoded with decodebin using the rtp:// interface.
The code can be used as follows
```
gst-launch-1.0 videotestsrc ! x264enc ! rtph264pay config-interval=3 ! rtpsink uri=rtp://239.1.1.1:1234
gst-launch-1.0 videotestsrc ! x264enc ! rtph264pay config-interval=1 ! rtpsink uri=rtp://239.1.2.3:5000
gst-launch-1.0 rtpsrc uri=rtp://239.1.2.3:5000?encoding-name=H264 ! rtph264depay ! avdec_h264 ! videoconvert ! xvimagesink
gst-launch-1.0 videotestsrc ! avenc_mpeg4 ! rtpmp4vpay config-interval=1 ! rtpsink uri=rtp://239.1.2.3:5000
gst-launch-1.0 rtpsrc uri=rtp://239.1.2.3:5000?encoding-name=MP4V-ES ! rtpmp4vdepay ! avdec_mpeg4 ! videoconvert ! xvimagesink
```
rtpmanagerbad: add pkg-config
rtpmanagerbad: Rtp should be uppercase
rtpmanagerbad: add G_OS_WIN32 for shielding unix headers
rtpmanagerbad: remove Since from documentation
rtpmanagerbad: rename lib name from nrtp to rtpmanagerbad
rtpmanagerbad: sync meson.build with other modules
rtpmanagerbad: add Makefile.am
rtpmanagerbad: use GstElement to count pads
rtpmanagerbad: use gst_bin_set_suppressed_flags
rtpmanagerbad: check element creation
rtpmanagerbad: post message when trying to access missing rtpbin
rtpmanagerbad: return FALSE with g_return tests
rtpmanagerbad: use gsocket multicast check
rtpmanagerbad: use gst_caps_new_empty_simple iso gst_caps_from_string
rtpmanagerbad: sync with gstrtppayloads.h
rtpmanagerbad: correct media type X-GST
rtpmanagerbad: test if a compatible pad was found
rtpmanagerbad: remove evil copy of GstRTPPayloadInfo
rtpmanagerbad: add gio_dep to meson
rtpmanagerbad: revert to old glib boilerplate
GStreamer 1.16 does not yet support the newer GLib templates, so revert.
rtpmanagerbad: return GST_STATE_CHANGE_NO_PREROLL for live sources
for live sources, NO_PREROLL should be returned for PLAYING->PAUSED and
READY->PAUSED transitions.
rtpmanagerbad: use GstElement pad counting
rtpmanagerbad: just use template name to request pad
rtpmanagerbad: remove commented code
rtpmanagerbad: use funnel to send multiple streams on one socket
rtpmanagerbad: avoid beaches
beaches should only be used during the summer, so rewrite the code to
return explicitly and avoid beaches during the winter.
rtpmanagerbad: add copyright to test code
rtpmanagerbad: g_free is NULL safe
rtpmanagerbad: do not trace rtpbin
rtpmanagerbad: return NULL explitly
rtpmanagerbad: warn when data port is not even
According to RFC 3550, RTP data should be sent on even ports, while RTCP
is sent on the following odd port.
rtpmanagerbad: document port allocation in rtpsink/src
rtpmanagerbad: improve uri description
rtpmanagerbad: add comment re-use socket
rtpmanagerbad: rename gst_object_set_properties_from_uri_query
rtpmanagerbad: loan prop/val setter from rist
rtpmanagerbad: rtpsrc: fix unitialised pointer
rtpmanagerbad: fix silly typo
rtpmanagerbad: test for empty key/value
rtpmanagerbad: rtpsrc: deprecate ssrc collision to INFO
rtpmanagerbad: sync debug with rist
rtpmanagerbad: small strings allocated on stack
rtpmanagerbad: correct rename
rtpmanagerbad: add locking on prop setters/getters
Locking is added because the URI allows to access the properties too.
rtpmanagerbad: allow for RTCP through NAT
rtpmanagerbad: move gio to header file
rtpmanagerbad: free small strings too
rtpmanagerbad: ttl_mc for ttl on dynudpsink
rtpmanagerbad: add comments on the URI registered
rtpmanagerbad: correct macro after file rename
rtpmanagerbad: code style
rtpmanagerbad: handle wrong URIs in setter
rtpmanagerbad: nit URI notation correction
In an URI, the first key/value pair should not have an ampersand, the
parser did not die though.
As sections can be provided by the user through send_event
when the element state is NULL, their lifetime is expected
to match that of the muxer, and they must be preserved when
the state changes
We can have multiple TsMuxPacketInfo objects for the same PID
with user-provided sections, for example ATSC requires multiple
tables with the same PID.
This might be necessary temporarily for changing the previous settings.
Make it an actual error if the settings are like this while processing a
buffer.
It is parsing frame data and so should check the data size against the
frame header size instead of the file header size. If don't, it is
possible to drop the last frame because IVF_FILE_HEADER_SIZE is greater
than IVF_FRAME_HEADER_SIZE
This patchs add support for configuring the bonding method used. There is
two method specified
- redundant: All the RTP packets are replicated
- combined: RTP packet are evenly distributed over each links
Additionally, an application can set the "dispatcher" property in order
to implement custom dispatching method. Whenever the "dispatcher"
property is set, "bonding-method" property will be ignored.
As we can now have multiple sessions, stats need to be implemented per
session. This follow RTPSession model with sources. The stats are now:
dropped: 0
received: 0
recovered: 0
permanently-lost: 0
duplicates: 0
retransmission-requests-sent: 0
rtx-roundtrip-time: 0
session-stats:
session-id=0
rtp-from=""
rtcp-from=""
dropped=0
received=0
session-id=1
rtp-from=""
rtcp-from=""
dropped=0
received=0
. . .
session-stats is a GValueArray as there is no better alternatives.
As we can now have multiple sessions, stats need to be implemented per
session. This follow RTPSession model with sources. The stats are now:
sent-original-packets: 0
sent-retransmitted-packets: 0
session-stats:
session-id=0
sent-original-packets=0
sent-retransmitted-packets=0
round-trip-time=0
session-id=1
sent-original-packets=0
sent-retransmitted-packets=0
round-trip-time=0
. . .
session-stats is a GValueArray as there is no better alternatives.
gstmpegtsmux.c:291:3: error: implicit declaration of function ‘memmove’ [-Werror=implicit-function-declaration]
memmove (map.data + 4, map.data, map.size - 4);
^
gstmpegtsmux.c:291:3: error: incompatible implicit declaration of built-in function ‘memmove’ [-Werror]
gstmpegtsmux.c:291:3: note: include ‘<string.h>’ or provide a declaration of ‘memmove’
... and set to caps if necessary.
Note 1) the mastering display info and content light level SEI meessages
are persistent in the corresponding codec video sequence (i.e., GOP).
So any bitstream containing those SEI messages
(and also all pictures are intended to be HDR rendered) should be ensured that
each first slice of codec video sequence follows those SEI messages.
Note 2) The codec video sequence is a group an [IRAP + NoRaslOutputFlag == 1]
and following AUs which are not [IRAP + NoRaslOutputFlag == 1]
The NoRaslOutputFlag is equal to 1 for each IDR AU, BLA AU and some CRA AU.
For a CRA AU to have NoRaslOutputFlag equal to 1, following condition should required.
* When the CRA AU is the first AU in the bitstream in decoding order
* or the CRA AU is the first AU that follows an end of sequence NAL in decoding order
* or the HandleCraAsBlaFlag equal to 1.
Due to the limited context in parse element, in this commint, CRA AU will not considered as
having the NoRaslOutputFlag equal to 1. Therefore, in the worst case,
mastering-display-info and content-light-level could be cleared one GOP after
when stream was chagned from HDR to SDR.
RIST TR-06-1 is a specification for video streaming made by the VSF
group. It is using a subset of RTP specification to which some
modification has been made to improve RTX behaviour and avoid any need
for signaling. The plugin implement ristrtxsend / ristrtxreceive element
which are the RIST specific equivalent of rtprtxsend/rtprtxreceive and
ristsink / ristsrc which implement rist transmitter and receiver. The
RIST protocol is meant to be used in unidirectional way. Typically, MPEG
TS over RTP is used.
Currently we support unicast and multicast streaming according to the
specification. This patch does not include any bonding support yet. The
ristsrc element introduce rist:// URI handling in parallel to it's
property configuration interface.
Expose SEI data in the H.264 bitstream parser API and
extract closed captions and other things that are not
specified in the H.264 spec itself in the videoparser.
Based on patch by: Mathieu Duponchelle <mathieu@centricular.com>
https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/issues/940
when computing timecode metas. Depending on the value of that flag,
n_frames is to be interpreted as a number of fields or a number of
frames. As GstVideoTimeCodeMeta always deals with frames, we want
to scale that number when needed.
This debug code will help determine why certain instances of closed
captions that are present in the Picture User Data are not actually
processed by the pipeline
In 7c767f3fcd , stream creation was
refactored to occur before potential program creation. This created
issues with pipelines such as:
gst-launch-1.0 videotestsrc ! video/x-raw, format=I420, width=640, height=640, framerate=25/1 ! \
x264enc ! hlssink2 target-duration=1
eg.: gst_buffer_copy_into: assertion 'bufsize >= offset + size' failed
As this reordering was actually not needed for the purpose of allowing
to specify a PCR stream, this reverts the reordering part of the
initial commit.
The MPEG-TS packetiser should use the upstream DTS for
skew correction when running in that mode, as the DTS
carries the upstream arrival time. The PTS (if it's
set at all) is less useful, and can be invalid.
gstladspa.c:360:5: error: zero-length ms_printf format string [-Werror=format-zero-length]
vad_private.c:108:3: error: this decimal constant is unsigned only in ISO C90 [-Werror]
gstdecklinkvideosink.cpp:478:32: error: comparison between 'BMDTimecodeFormat {aka enum _BMDTimecodeFormat}' and 'enum GstDecklinkTimecodeFormat' [-Werror=enum-compare]
win/DeckLinkAPI_i.c:72:8: error: extra tokens at end of #endif directive [-Werror]
win/DeckLinkAPIDispatch.cpp:35:10: error: unused variable 'res' [-Werror=unused-variable]
gstwasapiutil.c:733:3: error: format '%x' expects argument of type 'unsigned int', but argument 8 has type 'DWORD' [-Werror=format]
gstwasapiutil.c:733:3: error: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'guint64' [-Werror=format]
kshelpers.c:446:3: error: missing braces around initializer [-Werror=missing-braces]
kshelpers.c:446:3: error: (near initialization for 'known_property_sets[0].guid.Data4') [-Werror=missing-braces]
The way FlowCombiner combines the FLUSH doesn't work in the case
we have several "sinkpads" since any flush return FLUSH. But in the
case we have a seek where on one branch flush is done, we should
just say OK otherwise we might return FLUSHING to a src that has already
been seeked and is ready to process new buffers
/usr/bin/ld: .libs/libgstremovesilence_la-vad_private.o: in function `vad_set_threshold':
./gst/removesilence/vad_private.c:108: undefined reference to `pow'
/usr/bin/ld: .libs/libgstremovesilence_la-vad_private.o: in function `vad_get_threshold_as_db':
./gst/removesilence/vad_private.c:114: undefined reference to `log10'
vps/sps/pps in codec_data shouldn't be considered as inband data.
Otherwise, h26{4,5}parse never insert them to nal when transform
(packetized to byte-stream) use case
