Vivia Nikolaidou
832764d2fd
decklink: Add initial 10bit support for YUV modes
...
https://bugzilla.gnome.org/show_bug.cgi?id=742878
2016-05-03 15:57:23 +03:00
Julien Moutte
3ea431c5b5
decklinkvideosrc: implement RGB capture support
...
Combine mode and format to generate caps and support the flags from VideoChanged callback to support RGB capture.
https://bugzilla.gnome.org/show_bug.cgi?id=760594
2016-01-22 16:11:08 +01:00
Sebastian Dröge
9764e22a5c
decklink: Add a clock epoch that is used as offset whenever restarting the clock
...
Otherwise we're going to return times starting at 0 again after shutting down
an element for a specific input/output and then using it again later.
https://bugzilla.gnome.org/show_bug.cgi?id=755426
2015-09-24 09:32:36 +02:00
Sebastian Dröge
e0fd5317df
decklink: Disable inputs/outputs in PAUSED->READY to allow going to PAUSED again from there
...
https://bugzilla.gnome.org/show_bug.cgi?id=755426
2015-09-24 09:32:27 +02:00
Josep Torra
cf66541850
decklinkvideosrc: fix mode autodetection
...
The autodetection mode was broken because a race condition in the input mode
setting. The mode could be reverted back when it was replaced in
the streaming thread by the old mode in the middle of mode changed callback.
2015-04-22 17:20:22 +02:00
Sebastian Dröge
4521524de3
decklink: Reset the clock calibration when unsetting the master clock
...
Otherwise the old calibration will stick around for the next time we use it,
potentially giving us completely wrong times.
2015-03-02 16:45:45 +01:00
Sebastian Dröge
8e362aab14
decklink{audio,video}src: Add some more debug output
2015-03-02 13:57:24 +01:00
Sebastian Dröge
72b440cc89
decklinkvideosrc: Fix scaling with rate of internal/external clock
2015-02-27 11:08:14 +02:00
Sebastian Dröge
9ed4054a94
decklinkvideosrc: Apply the diff between element and pipeline "base" time in all cases
...
Even if both clocks have the same rate, we need to apply this diff. Only when
it's the same clock we don't, as it's our clock then.
2015-02-10 16:01:19 +01:00
Sebastian Dröge
f83ac624e3
decklinkvideosrc: Add the diff between the pipeline base time and when we start to play
...
Add the diff between the external time when we went to playing and
the external time when the pipeline went to playing. Otherwise we
will always start outputting from 0 instead of the current running
time.
2015-02-10 15:30:44 +01:00
Sebastian Dröge
e8167dd118
decklinkvideo{src,sink}: Sample the internal clock immediately after starting the device
...
Otherwise we might stay at 0.0s for too long because we will take the first
timestamp we ever see as 0.0... which will be after we started the device.
2015-02-10 14:48:09 +01:00
Sebastian Dröge
f0e85023c2
decklink{audio,video}src: Implement clock slaving if the pipeline clock is not the decklink clock
2015-02-09 17:17:37 +01:00
Sebastian Dröge
22b0a4dad5
decklink{audio,video}src: Take the capture times from the pipeline clock
...
Not from the decklink clock. Both will return exactly the same time once the
decklink clock got slaved to the pipeline clock and received the first
observation, but until then it will return bogus values. But as both return
exactly the same values, we can as well use the pipeline clock directly.
2015-02-08 21:56:04 +01:00
Sebastian Dröge
4eb5cd9156
decklink{audio,video}sink: Only start scheduled playback once both sources are ready and we are in PLAYING
...
Otherwise we might start the scheduled playback before the audio or video streams are
actually enabled, and then error out later because they are enabled to late.
We enable the streams when getting the caps, which might be *after* we were
set to PLAYING state.
2015-01-28 16:13:16 +01:00
Sebastian Dröge
e2ff5587fe
decklink{audio,video}src: Only start the streams once both sources are ready and we are in PLAYING
...
Otherwise we might start the streams before the audio or video streams are
actually enabled, and then error out later because they are enabled to late.
We enable the streams when getting the caps, which might be *after* we were
set to PLAYING state.
2015-01-28 16:13:16 +01:00
Sebastian Dröge
00176a1ddf
decklink: Make sure our clock never returns NONE, always advances and does not jump when going from PAUSED to PLAYING
...
It basically behaves the same as the audio clocks.
2015-01-28 16:13:16 +01:00
Sebastian Dröge
8a5d2c561c
decklinkvideo{sink,src}: Make elements more similar to the audio elements by enabling the video input/output only when getting the actual caps
...
This will also make it easier later to support caps changes and support
selecting the mode based on the caps if that should ever be implemented.
2015-01-28 16:13:16 +01:00
Sebastian Dröge
f3ae93e504
decklinkvideosrc: Properly report caps if mode!=auto and handle caps changes properly for mode=auto
2015-01-28 16:13:16 +01:00
Sebastian Dröge
4531a341a8
decklinkvideosrc: Post LATENCY message when the mode changes
...
Different modes have different framerates, and thus different latencies. We
might need to reconfigure the latency of the pipeline.
2015-01-08 18:16:12 +01:00
Sebastian Dröge
beede3f27d
decklinkvideosrc: Fix compiler warning
2015-01-08 18:16:12 +01:00
Florian Langlois
9480d91ad4
decklinkvideosrc: Add automatic mode detection
...
https://bugzilla.gnome.org/show_bug.cgi?id=739284
2015-01-08 18:16:12 +01:00
Sebastian Dröge
a35d5ae9b9
decklinkvideosrc: Add auto value for the connection property
...
This will use the default/auto connection for video capturing, and can
be set via the Decklink configuration tools.
2015-01-08 12:23:09 +01:00
Sebastian Dröge
478deb4805
decklink: Fix indention once again
2015-01-08 12:13:03 +01:00
Florian Langlois
81c1ef190d
decklink: Add property for configuring the input connection of the video sources
2015-01-08 12:12:50 +01:00
Florian Langlois
e7c6eb6326
decklink: Fix latency values for sources
2015-01-07 16:42:57 +01:00
Sebastian Dröge
ec90bbb6f3
decklink: Add property for configuring the buffer size of the sources
2014-12-19 14:40:40 +01:00
Sebastian Dröge
7c0fb92f1b
decklink: Our capture time is the end timestamp of the buffer, subtract the duration
2014-12-19 14:40:40 +01:00
Sebastian Dröge
4ef676f109
decklink: Allow for a maximum of 5 packets to be queued up
...
In case downstream is a bit slow with consuming packets at times.
2014-12-19 14:40:40 +01:00
Sebastian Dröge
aac0027ed2
decklink: Implement latency query in sources and remember selected mode
2014-12-19 14:40:40 +01:00
Sebastian Dröge
6d931a0c0e
decklink: Add initial version of audio and video sources
2014-12-19 14:40:39 +01:00
