Really report sample aspect ratio (SAR) as present, and make it match
what we have obtained from the user as pixel-aspect-ratio (PAR). i.e.
really make sure VUI parameter aspect_ratio_info_present_flag is set
to TRUE and that the indication from aspect_ratio_idc is Extended_SAR.
This is a leftover from git commit a12662f.
https://bugzilla.gnome.org/show_bug.cgi?id=740360
Fix gst_vaapi_decoder_mpeg4_parse() to initialize the packet type to
GST_MPEG4_USER_DATA so that a parse error would result in skipping
that packet. Also fix gst_vaapi_decoder_mpeg4_decode_codec_data() to
initialize status to GST_VAAPI_DECODER_STATUS_SUCCESS.
If the best downstream capsfeature turns out to be GLMemory, then make
sure to propagate RGBA video format in caps to that element. This fixes
the following pipeline: ... ! vaapipostproc ! glimagesink.
When an explicit output video format is selected, from an src pad
capsfilter, make sure that the downstream element actually supports
that format. In particular, fix crash with the following pipelines:
... ! vaapipostproc ! video/x-raw,format=XXX ! xvimagesink ; where
XXX is a format not supported by xvimagesink.
While doing so, also reduce the set of src pad filter caps to the
actual set of allowed src pad caps.
The ensure_surface() and ensure_image() functions shall only relate
to the underlying backing store. The actual current flags are to be
updated only through ensure_{surface,image}_is_current() or very other
particular cases in GstMemory hooks.
If the surface proxy is updated into the GstVaapiVideoMemory, then
it is assumed it is the most current representation of the current
video frame. Likewise, make a few more arrangements to have the
"current " flags set more consistently.
When interacting with SW elements, the buffers and underlying video
memory could be mapped as read/write. However, we need to use those
buffers again as plain VA surfaces, we have to make sure the VA image
is thus committed back to VA surface memory.
This fixes pipelines involving avdec_* and vaapi{postproc,sink}.
Hence vaapisink can display buffers decoded by gst-libav, or HW decoded
buffers can be further processed in-place, e.g. with a textoverlay.
https://bugzilla.gnome.org/show_bug.cgi?id=704078
[ported to current git master branch, amended commit message]
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
In the current implementation, gst_video_info_set_format() would reset
the whole GstVideoInfo structure first, prior to setting video format
and size. So, coleteral information like framerate or pixel-aspect-
ratio are lost.
Provide and use a unique gst_video_info_change_format() for overcome
this issue, i.e. only have it change the format and video size, and
copy over the rest of the fields.
https://bugzilla.gnome.org/show_bug.cgi?id=734665
This is for helping decodebin to autoplug the vaapidecode element.
Decodebin is selecting decoder elements only based on rank and caps.
Without overriding the autoplug-* signals there is no way to autoplug
HW decoders inside decodebin. An easier soulution is to raise the
rank of vaapidecode, so that it gets selected first.
https://bugzilla.gnome.org/show_bug.cgi?id=739332
Use the SEI pic_timing() message to track and propagate down the repeat
first field (RFF) flag. This is only initial support as there is one
other condition that could induce the RFF flag, which is not handled
yet.
Fix the decoding process for picture order count type 0 when the previous
picture had a memory_management_control_operation = 5. In particular, fix
the actual variable type for prev_pic_structure to hold the full bits of
the picture structure.
In practice, this used to work though, due to the underlying type used to
express a gboolean.
Use the SEI pic_timing() message to track the pic_struct variable when
present, or infer it from the regular slice header flags field_pic_flag
and bottom_field_flag. This fixes temporal sequence ordering when the
output pictures are to be displayed.
https://bugzilla.gnome.org/show_bug.cgi?id=739291
1241840 h264: fix derivation of MaxPicNum variable
3bd718e h264: fix GstH264ParserResult documentation typo
b021609 h264parse: set the HEADER flag on buffers containing SPS or PPS
b08e4be h264parse: don't unnecesarily set src_caps
Added the same Klass specifications used in other upstream
video postprocessing elements like videoconvert, videoscale,
videobalance and deinterlace.
An example use case is for this is to help the playsink
to autoplug the hardware accelerated deinterlacer.
This is a workaround until auto-plugging is fixed when
format=ENCODED + memory:VASurface caps feature are provided.
Use the downstream negotiated video format as the output video format
if the user didn't ask for the colorspace conversion explicitly.
Usecase: This will help to connect elements like videoscale, videorate etc
to vaapipostproc.
https://bugzilla.gnome.org/show_bug.cgi?id=739443
Add new "scale-method" property to expose the scaling mode to use during
video processing. Note that this is only a hint, and the actual behaviour
may differ from implementation (VA driver) to implementation.
2218b02 h264parse: expose parsed profile and level to downstream
3dbfab4 h264parse: return flushing if we get chained while being set to READY
d40fa8b h264: fix frame packing SEI parsing
32d40be h264: Use proper bit_reader api while parsing buffering_period SEI
b3e022e h264: initialize some fields of pic_timing structure
a70661d vc1: fix expected level in sequence-layer parsing unit test
6cee88d vc1: fix level values for simple/main profile
356c189 vc1: add unit test for sequence-layer parsing
ab9f641 vc1: take care of endianness when parsing sequence-layer
8dc8e35 mpeg4: fix vlc table used for sprite trajectory
Attach the codec_data to out_caps only if downstream needed.
For eg: h264 encoder doesn't need to stuff codec_data to the
src caps if the negotiated caps has a stream format of byte-stream.
https://bugzilla.gnome.org/show_bug.cgi?id=734902
Add support for DRM Render-Nodes. This is a new feature that appeared
in kernel 3.12 for experimentation purposes, but was later declared
stable enough in kernel 3.15 for getting enabled by default.
This allows headless usages without authentication at all, i.e. usages
through plain ssh connections is possible.
Fix arguments to XkbKeycodeToKeysym() for converting an X11 keycode
to a KeySym. In particular, there is no such Window argument. Also
make sure to check for, and use, the correct <X11/XKBlib.h> header
where that new function is defined. Otherwise, default to the older
XKeycodeToKeysym() function.
Really use the motion event coordinates to propagate the "mouse-move"
event to upper layer, instead of those from a button event. Those are
technically the same though.
When we copy a buffer because we're moving it into VA-API memory, we
need to copy flags. Otherwise, interlaced YUV buffers from a capture
source (e.g. V4L2) don't get flagged as interlaced.
https://bugzilla.gnome.org/show_bug.cgi?id=726270
Signed-off-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk>
[reversed order of gst_buffer_copy_into() flags to match <1.0 code]
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Allow implicit conversions to raw video formats, while still keeping
VA surfaces underneath. This allows for chaining the vaapipostproc
element to a software-only element that takes care of maps/unmaps.
e.g. xvimagesink.
https://bugzilla.gnome.org/show_bug.cgi?id=720174
Use pooled GstVaapiVideoMeta information, i.e. always allocate that on
video buffer allocation. Also optimize copy of additional metadata info
into the resulting video buffer: only copy the video cropping info and
the source surface proxy.
https://bugzilla.gnome.org/show_bug.cgi?id=720311
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
[fixed proxy leak, fixed double free on error, optimized meta copy]
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
If no explicit output surface format is supplied try to keep the one
supplied through the sink pad caps. This avoids a useless copy, even
if things are kept in GPU memory.
This is a performance regression from git commit dfa70b9.
If only advanced deinterlacing is requested, i.e. deinterlacing is
the only active algorithm to apply with source and output surface
formats being the same, then make sure to enable VPP processing.
Otherwise, allow fallback to bob-deinterlacing with simple rendering
flags alteration.
Add a default decide_allocation() hook to GstVaapiPluginBase. The caps
feature argument can be used to force a bufferpool with a specific kind
of memory.
Add GST_VAAPI_VIDEO_BUFFER_POOL_ACQUIRE_FLAG_NO_ALLOC params flag that
can be used to disable early allocations of vaapi video metas on buffers,
thus delagating that to the bufferpool user.
Fix gst_vaapi_surface_proxy_copy() to copy the view-id element, thus
fixing random frames skipped when vaapipostproc element is used in
passthrough mode. In that mode, GstMemory is copied, thus including
the underlying GstVaapiVideoMeta and associated GstVaapiSurfaceProxy.
Default to I420 format for output surfaces so that to match the usual
GStreamer pipelines. Though, internally, we could still opt for NV12
surface formats, i.e. default format=ENCODED is a hint for that, thus
delegating the decision to the VA driver.
Use the new gst_caps_has_vaapi_surface() helper function to detect
whether the sink pad caps contain native VA surfaces, or not, i.e.
no raw video caps.
Also rename is_raw_yuv to get_va_surfaces to make the variable more
explicit as we just want a way to differentiate raw video caps from
VA surfaces actually.
The "discontinuity" tracking code, whereby lost frames are tentatively
detected, is inoperant if the sink pad buffer timestamps are not right
to begin with.
This is a temporary workaround until the following bug is fixed:
https://bugzilla.gnome.org/show_bug.cgi?id=734386
