Adding the compatile profiles when we decide the final profile used for decoding.
The final profile candidates include:
1. The profile directly specified by SPS, which is the exact one.
2. The compatile profiles decided by the upstream element such as the h265parse.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2322>
The segmentation is stateful, its information may depend on the previous
segmentation setting. For example, if loop_filter_delta_enabled is TRUE,
the filter_level[GST_VP9_REF_FRAME_INTRA][1] should inherit the previous
frame's value and can not be calculated by the current frame's segmentation
data only. So we need to maintain the segmentation state inside the vp9
decoder and update it when the new frame header comes.
We also fix the CLAMP issue of lvl_seg and intra_lvl because of their wrong
uint type here.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2369>
The current way of DMA buffer mapping is simply forwarding the job
to parent's map function, which is a mmap(). That can not handle the
non-linear buffers, such as tiling, compressed, etc. The incorrect
mapping of such buffers causes broken images, which are recognized
as bugs. We should directly block this kind of mapping to avoid the
misunderstanding.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2353>
If the decoder has crop_top/left value > 0(e.g. the conformance
window in the H265). Which means that the real output picture
locates in the middle of the decoded buffer. If the downstream can
support VideoCropMeta, a VideoCropMeta is added to notify the
real picture's coordinate and size. But if not, we need to copy
it manually and the other_pool is needed. We always assume that
decoded picture starts from top-left corner, and so there is no
need to do this if crop_bottom/right value > 0.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2298>
The base va decoder's video_align is just used for calculation the
real decoded buffer's width and height. It does not have meaning
for the VideoMeta, because it does not align to the real picture
in the output buffer. We will use VideoCropMeta to replace it later.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2298>
The base va decoder's video_align is just used for calculation the
real decoded buffer's width and height. While the gst_video_info_align
just calculate the offset and stride based on the video_align. But
all the offsets and strides are overwritten in gst_va_dmabuf_allocator_try
or gst_va_allocator_try, which make that calculation useless.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2298>
By this commit, following formats will be newly supported by d3d11 elements
* Y444_{8, 12, 16}LE formats:
Similar to other planar formats. Such Y444 variants are not supported
by Direct3D11 natively, but we can simply map each plane by
using R8 and/or R16 texture.
* P012_LE:
It is not different from P016_LE, but defining P012 and P016 separately
for more explicit signalling. Note that DXVA uses P016 texture
for 12bits encoded bitstreams.
* GRAY:
This format is required for some codecs (e.g., AV1) if monochrome
is supported
* 4:2:0 planar 12bits (I420_12LE) and 4:2:2 planar 8, 10, 12bits
formats (Y42B, I422_10LE, and I422_12LE)
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2346>
When B-frame is enabled, encoder seems to adjust PTS of encoded sample
by using frame duration.
For instance, one observed timestamp pattern by using B-frame enabled
and 30fps stream is:
* Frame-1: MF pts 0:00.033333300 MF dts 0:00.000000000
* Frame-2: MF pts 0:00.133333300 MF dts 0:00.033333300
* Frame-3: MF pts 0:00.066666600 MF dts 0:00.066666600
* Frame-4: MF pts 0:00.099999900 MF dts 0:00.100000000
We can notice that the amount of PTS shift is frame duration and
Frame-4 exhibits PTS < DTS.
To compensate shifted timestamp, we should
calculate the timestamp offset and re-calculate DTS correspondingly.
Otherwise, total timeline of output stream will be shifted, and that
can cause time sync issue.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2354>
As per SDK doc, IDeckLinkInputCallback::VideoInputFrameArrived
method might not provide video frame and it can be null.
In that case, given stream_time can be invalid.
So, we should not try to convert GST_CLOCK_TIME_NONE
by using gst_clock_adjust_with_calibration()
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2337>
Track kernel and VA driver dependencies so gstreamer
will re-inspect the plugin if any of them change.
Also, do not blacklist the plugin if !msdk_is_available
since it could be a transient issue caused by one or
more external dependency issues (e.g. wrong/missing
driver specified, but corrected by user later on).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2335>
We add 12 bits entries into this default mapping. And the old mapping
is not precise. For example, the NV12 should not be used as the default
mapping for VA_RT_FORMAT_YUV422 and VA_RT_FORMAT_YUV444, it is even not
a 422 or 444 format.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2332>
alphacombine element is a simple element that assumes buffers are always
paired, or at least that missing buffers are signalled with a GAP. The QoS
implementation in the GstVideoDecoder base class allow decoders dropping
frames independently and that could lead to stall in alphacombine.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2326>
... based on MediaFoundation work queue API.
By this commit, wasapi2 plugin will make use of pull mode scheduling
with audioringbuffer subclass.
There are several drawbacks of audiosrc/audiosink subclassing
(not audiobasesrc/audiobasesink) for WASAPI API, which are:
* audiosrc/audiosink classes try to set high priority to
read/write thread via MMCSS (Multimedia Class Scheduler Service)
but it's not allowed in case of UWP application.
In order to use MMCSS in UWP, application should use MediaFoundation
work queue indirectly.
Since audiosrc/audiosink scheduling model is not compatible with
MediaFoundation's work queue model, audioringbuffer subclassing
is required.
* WASAPI capture device might report larger packet size than expected
(i.e., larger frames we can read than expected frame size per period).
Meanwhile, in any case, application should drain all packets at that moment.
In order to handle the case, wasapi/wasapi2 plugins were making use of
GstAdapter which is obviously sub-optimal because it requires additional
memory allocation and copy.
By implementing audioringbuffer subclassing, we can avoid such inefficiency.
In this commit, all the device read/write operations will be moved
to newly implemented wasapi2ringbuffer class and
existing wasapi2client class will take care of device enumeration
and activation parts only.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2306>
This add src format validation, this avoid registering element for
drivers we don't support any of their src formats. This also special
case the AlphaDecodeBin wrapper, as we know that alphacombine element
only support I420 and NV12 for now.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2272>
codecalpha is a new plugin introduced to support VP8/VP9 alpha as
defined in the WebM and Matroska specifications. It splits the stream
into two streams, one for the alpha and one for the actual content,
then it decodes them separately with vpxdec and finally combine the
results as A420 or AV12 (i.e. YUV + an extra alpha plane).
The workflow above is setup by means of a bin, gstcodecalphabin.
This patch simulates the same workflow into the v4l2codecs namespace,
thus using the new v4l2 stateless decoders for hardware acceleration.
This is so we can register the new alpha decode elements only if the
hardware produces formats we support, i.e. I420 or NV12 for now.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2272>
We already declare the support of HEVC screen content extension profiles
in the profile mapping list, but we fail to generate the correct VA picture
parameters buffers. This may cause the GPU hang.
We need to fill the buffer of VAPictureParameterBufferHEVCExtension correctly.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2255>
The function of gst_h265_get_profile_from_sps() is better than the
function gst_h265_profile_tier_level_get_profile() when we recognize
the profile of the stream, becaue it considers the compatibility.
It is also used by h265parse to recognize the profile. So it is
better to keep the same behaviour with the parse and other decoders.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2255>
We already declare the support of HEVC range extension profiles in
the profile mapping list, but we fail to generate the correct VA
picture and slice parameters buffers. This may cause the GPU hang.
We need to fill the buffer of VAPictureParameterBufferHEVCExtension
and VASliceParameterBufferHEVCExtension correctly.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2255>
VA-API HEVC decoding needs to known which is the last slice of a
picture, but slices are processed sequencially, so we know the
last slice until all the slices are already pushed into the
VABuffer array.
In order to mark the last slice, they are pushed into the
VABuffer array with a delay of one slice: the first slice is
hold, and when the second slice come, the first one is pushed
while holding the second, and so on. Finally, at end_picture(),
the last slice is marked and pushed into the array.
Co-author: Victor Jaquez <vjaquez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2246>
The VA acceleration now has more usages in linux-like platforms,
such as the MSDK. The different plugins based on the VA acceleration
need to share some common logic and types. We now move the display
related functions and types into a common va lib.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2196>
The VP9 related definitions in mfxvp9.h are available under the
condition of 'MFX_VERSION >= MFX_VERSION_NEXT', which implies that these
definitions are never used in a public release.
This is in preparation for oneVPL support because mfxvp9.h was
removed from oneVPL
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1503>
We have only one copy of gst_va_base_dec_parent_class inside the
vabasedec, so it can not handle the case when there are multi va
decoders inside one pipeline. The pipeline:
gst-launch-1.0 filesrc location=xxx.h264 ! h264parse \
! vah264dec ! msdkh265enc ! vah265dec ! fakesink
generates a assertion of
"invalid cast from 'GstVaH264Dec' to 'GstH265Decoder"
and gets a crash.
We should keep the parent_class for each decoder type.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2231>
VADecPictureParameterBufferAV1.mode_control_fields.bits were filled
twice, overwriting to zeros the first assignation. This patch unifies
both assignations.
Also it makes explicit an enum casting between libva and gstreamer; it
removes the assignation to zero a deprecated parameter; and use an
appropriate assertion.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2223>
Before creating output duplication interface, call SetThreadDesktop()
with HDESK of the current input desktop in case a desktop switch has
occurred.
This allows d3d11desktopdupsrc to capture Windows User Account Control
(UAC) prompts, which appear on a separate secure desktop. Otherwise
IDXGIOutput1::DuplicateOutput() will return E_ACCESSDENIED and the
element won't produce any frames as long as the UAC screen is active.
Note that in order to access secure desktop the application still has to
run at LOCAL_SYSTEM privileges. For GStreamer applications running with
regular user privileges this change has no effect.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2209>
IDXGIOutputDuplication can become invalid for example when there's
desktop switch, resolution change or Windows User Account Control prompt
appears on screen.
When that happens, try to re-create the duplication interface for the
changed output. Note that in the case of UAC prompt this operation will
fail if the GStreamer process doesn't run at LOCAL_SYSTEM privileges. In
such situation the source element won't create any frames as long as the
output is occupied by UAC screen.
In order to enable UAC access to sufficiently privileged GStreamer
processes, call SetThreadDesktop() with the desktop handle that
currently receives user input before creating our output duplication.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2204>
The problem is for uploading YUV frames using derived images, is that
derived images imply tiling, so frames are wrongly uploaded.
Though derived for reading might work we cannot know the Intel graphics
generation to validate the caching. Overall, it's safer to disable derived
images for i965.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2127>
iHD driver sets a tiled DRM modifier if surface's usage hint is set to
VPP_WRITE. This result in a garbled rendering when using glimagesink.
This patch changes the usage hint to generic if the caps feature is
DMABuf. Either way only iHD driver, so far, uses the usage hint flag.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2127>
Some capture devices might not provide channel mask value which will
result in capturing failure because of unknown channel mask in case
that device generates more than 2 channels. Although it might not
be correct, we can assume channel mask with the given number of channels.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2177>
