Original commit message from CVS:
* gst/audiorate/gstaudiorate.c: (gst_audio_rate_chain):
Debug output fixes.
* tests/check/elements/audiorate.c: (do_perfect_stream_test),
(GST_START_TEST):
Change the number of buffers used; 500 is too many and leads to
timeouts.
Original commit message from CVS:
* gst/audiorate/gstaudiorate.c: (gst_audio_rate_chain):
If we have a large (> 1 second) discontinuity, push a series of
smaller buffers rather than a single very large buffer. Avoids
unreasonably large single buffer allocations when encountering a
large gap.
* tests/check/elements/audiorate.c: (GST_START_TEST),
(audiorate_suite):
Add a test for this.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (group_commit),
(queue_remove_probe), (queue_threshold_reached):
Patch by: Josep Torra Valles <josep@fluendo.com>
Fixes: #465015
Make sure we remove the check_queues buffer probe from the
correct queue to avoid racily going back to "buffering 99%" when
buffering is actually complete.
Also, fix the spelling of Josep's surname in the ChangeLog.
Original commit message from CVS:
Patch by: Josep Torre Valles <josep@fluendo.com>
* gst/playback/gstplaybasebin.c: (gst_play_base_bin_class_init),
(gst_play_base_bin_init), (queue_threshold_reached),
(gen_source_element), (setup_substreams),
(gst_play_base_bin_set_property), (gst_play_base_bin_get_property),
(gst_play_base_bin_get_streaminfo_value_array):
* gst/playback/gstplaybasebin.h:
* gst/playback/gstplaybin.c: (gst_play_bin_class_init),
(gst_play_bin_set_property), (gst_play_bin_get_property),
(gst_play_bin_handle_redirect_message):
Move connection-speed property from playbin to playbasebin so that we
can also configure it in source elements that have the connection-speed
property. Fixes#464028.
Add some debug info here and there.
Original commit message from CVS:
* gst/audiotestsrc/gstaudiotestsrc.c: (gst_audio_test_src_query):
Properly respond to conversion queries. Fixes#464079.
Original commit message from CVS:
* gst/audiotestsrc/gstaudiotestsrc.c: (gst_audio_test_src_init),
(gst_audio_test_src_src_fixate), (gst_audio_test_src_setcaps),
(gst_audio_test_src_init_sine_table),
(gst_audio_test_src_change_wave), (gst_audio_test_src_create):
* gst/audiotestsrc/gstaudiotestsrc.h:
Add float/double and int32 support to audiotestsrc. Fixes#460422.
Also set the default volume to the default value specified in the
GParamSpec.
Original commit message from CVS:
Patch by: Jens Granseuer <jensgr at gmx dot net>
* gst/audioconvert/gstaudioquantize.c:
Fix C89 incompatibilities and spelling of explanations. Fixes#463215.
Original commit message from CVS:
Patch by: Dan Williams <dcbw at redhat dot com>
* gst/playback/gstplaybasebin.c:
(gst_play_base_bin_get_streaminfo_value_array):
Don't return NULL when querying the stream info value array but instead
return an empty array. Fixes#459204.
Original commit message from CVS:
* gst/videorate/gstvideorate.c: (gst_video_rate_init),
(gst_video_rate_query):
Use boilerplate.
Add latency query, might not be perfect yet but already works a lot
better. Fixes#442557.
Original commit message from CVS:
* gst/ffmpegcolorspace/gstffmpegcodecmap.c:
(gst_ffmpeg_caps_to_pixfmt):
Fix the r_mask test for RGBA32 on little-endian.
Fix a stupid typo that would have obviously broken
compilation on big-endian, if anyone was testing.
Original commit message from CVS:
* gst/videotestsrc/videotestsrc.c: (paint_hline_AYUV),
(paint_hline_str4):
* gst/videotestsrc/videotestsrc.h:
Add alpha to the color struct.
Use a default alpha value of 255 instead of 128.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (no_more_pads_full),
(setup_source):
Clear the dynamic pads counter when starting a new uri. This makes
reusing playbin work again.
Fixes#454264.
Original commit message from CVS:
* gst/ffmpegcolorspace/avcodec.h:
* gst/ffmpegcolorspace/gstffmpegcodecmap.c:
(gst_ffmpeg_pixfmt_to_caps), (gst_ffmpeg_caps_to_pixfmt),
(gst_ffmpegcsp_avpicture_fill):
* gst/ffmpegcolorspace/imgconvert.c: (img_convert),
(img_get_alpha_info):
Add 2 new pixel formats - ABGR32 and ARGB32, which are reflections
of the existing BGRA32 and RGBA32 formats with the alpha at the other
end of the word. Partially fixes#451908
Original commit message from CVS:
* gst/adder/gstadder.c: (gst_adder_sink_getcaps),
(gst_adder_request_new_pad):
Make getcaps more robust by not using the proxycaps function. This makes
sure that we don't end up recursively calling getcaps upstream.
See #316248.
Original commit message from CVS:
* gst/ffmpegcolorspace/gstffmpegcodecmap.c:
(gst_ffmpeg_pixfmt_to_caps), (gst_ffmpeg_caps_to_pixfmt):
Add a mapping for YUV format "IYU1", which is a 4:1:1 packed pixel
format, as produced by some dc1394 cameras like the iSight.
See http://www.fourcc.org/yuv.php#IYU1
Original commit message from CVS:
* gst/audioconvert/Makefile.am:
* gst/audioconvert/audioconvert.c: (audio_convert_get_func_index),
(check_default), (audio_convert_prepare_context),
(audio_convert_clean_context), (audio_convert_convert):
* gst/audioconvert/audioconvert.h:
* gst/audioconvert/gstaudioconvert.c:
(gst_audio_convert_dithering_get_type),
(gst_audio_convert_ns_get_type), (gst_audio_convert_class_init),
(gst_audio_convert_init), (gst_audio_convert_set_caps),
(gst_audio_convert_set_property), (gst_audio_convert_get_property):
* gst/audioconvert/gstaudioconvert.h:
* gst/audioconvert/gstaudioquantize.c:
(gst_audio_quantize_setup_noise_shaping),
(gst_audio_quantize_free_noise_shaping),
(gst_audio_quantize_setup_dither),
(gst_audio_quantize_free_dither),
(gst_audio_quantize_setup_quantize_func),
(gst_audio_quantize_setup), (gst_audio_quantize_free):
* gst/audioconvert/gstaudioquantize.h:
Implement dithering and noise shaping in audioconvert. By default now
TPDF dithering (and no noise shaping) will be used when converting
from a higher bit depth to 20 bit depth or smaller, otherwise
everything will be as it is now.
For the last audioconvert in a pipeline it would make sense to
use some kind of noise shaping, enabling it by default for all
conversions would give undesired results though. Fixes#360246.
* tests/check/elements/audioconvert.c: (setup_audioconvert),
(GST_START_TEST):
Adjust unit test for the new audioconvert.
Original commit message from CVS:
* gst/playback/gstqueue2.c: (apply_segment), (update_buffering):
Use other metrics as well when estimating the buffer level.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (make_decoder), (setup_source):
Small debug improvement.
* gst/playback/gstqueue2.c: (apply_segment), (update_buffering),
(plugin_init):
Tweak the rate estimation period.
When calculating the buffer filledness in rate estimation mode, don't
mix it with other metrics.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (gst_decode_group_new),
(gst_decode_group_expose), (gst_decode_group_free), (add_fakesink):
When creating the groups, allow for a 5 second, unlimited buffers
preroll phase after which we expose the group.
When the group is exposed, use a small number of buffers up to a 2
second limit. Also disconnect the overrun signal from multiqueue when we
exposed the group because it is not needed anymore.
Original commit message from CVS:
* ext/ogg/gstoggdemux.c: (gst_ogg_demux_find_chains):
The chain should be freed if we error out here, else it will leak.
* gst/playback/gstdecodebin.c: (disconnect_unlinked_signals),
(cleanup_decodebin):
Don't forget to *properly* remove the signals, else it will leak.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (analyze_new_pad):
When handling a delayed-caps notification case, mark
the group as dynamic so that the nbdynamic count is
incremented and decremented correctly. Fixes: #449156
Patch by: Wim Taymans <wim@fluendo.com>
Original commit message from CVS:
* gst/videoscale/vs_4tap.c: (vs_image_scale_4tap_Y):
Update tmpbuf for all neccesary rows, not just one, as is required
when downscaling.
Fixes#402076.
Original commit message from CVS:
Patches by: Thiago Sousa Santos <thiagossantos at gmail dot com>
* gst/playback/gstqueue2.c: (update_buffering),
(gst_queue_locked_enqueue):
Fix a division by zero when the max percent is <= 0. Fixes#446572.
also update the buffering status when receiving events. Fixes#446551.
Original commit message from CVS:
Based on patch by: Thiago Sousa Santos <thiagossantos at gmail dot com>
* gst/playback/gstqueue2.c: (gst_queue_peer_query),
(gst_queue_handle_src_query):
Wait for preroll before attempting to forward a duration query upstream.
Fixes#445505.
Original commit message from CVS:
Patch by: Thiago Sousa Santos <thiagossantos at gmail dot com>
* gst/playback/gstqueue2.c: (gst_queue_init),
(gst_queue_handle_sink_event), (gst_queue_chain),
(gst_queue_get_range), (gst_queue_src_checkgetrange_function),
(gst_queue_sink_activate_push), (gst_queue_src_activate_push),
(gst_queue_src_activate_pull):
Add pull based scheduling and fix some deadlocks. Fixes#444523.
Does not yet completely work because duration queries upstream won't
block yet.
Original commit message from CVS:
Based on a patch by Sven Arvidsson <sa at whiz dot se>:
* gst/subparse/gstsubparse.c: (parse_subrip),
(subviewer_unescape_newlines), (parse_subviewer),
(gst_sub_parse_data_format_autodetect),
(gst_sub_parse_format_autodetect), (gst_subparse_type_find):
* gst/subparse/gstsubparse.h:
Add support for SubViewer version 1 and 2 subtitles. Fixes#394061.
* tests/check/elements/subparse.c: (GST_START_TEST),
(subparse_suite):
Add a unit test for both SubViewer formats.
Original commit message from CVS:
* gst/audiotestsrc/gstaudiotestsrc.c: (gst_audio_test_src_do_seek):
Don't overflow intermediate values when seeking to large time values
in audiotestsrc.
Original commit message from CVS:
* gst/playback/gstqueue2.c: (gst_queue_have_data),
(gst_queue_create_read), (gst_queue_read_item_from_file),
(gst_queue_open_temp_location_file), (gst_queue_locked_enqueue):
Include stdio to define fseeko.
Original commit message from CVS:
* gst/playback/gsturidecodebin.c: (no_more_pads_full),
(new_decoded_pad), (remove_pads), (make_decoder), (setup_source),
(gst_uri_decode_bin_change_state):
Make sure we name srcpads uniquely even when using different internal
decodebins.
Signal no-more-pads when no more dynamic elements exist.
Remove pads on cleanup.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (gst_decode_bin_factory_filter),
(analyze_new_pad), (connect_pad), (expose_pad), (caps_notify_cb),
(caps_notify_group_cb), (gst_decode_group_new),
(gst_decode_group_free):
Add support for delayed caps fixation when autoplugging.
Optimize cases where a multiqueue is not needed/wanted, like right after
anything that is not a demuxer.
Original commit message from CVS:
* gst/tcp/gstmultifdsink.c: (gst_client_status_get_type),
(gst_multi_fd_sink_class_init), (gst_multi_fd_sink_add_full),
(gst_multi_fd_sink_remove_flush),
(gst_multi_fd_sink_remove_client_link),
(gst_multi_fd_sink_handle_client_write),
(gst_multi_fd_sink_handle_clients):
* gst/tcp/gstmultifdsink.h:
Add support for remuve_flush.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (queue_overrun),
(no_more_pads_full):
Stop buffering when the group is commited because the queues filled up.
Fixes#442024.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (new_decoded_pad_full):
Handle unknown or invalid pads without crashing, as might occur if
a media file like an mp3 is specified as a subtitle file.
Fixes: #410039
Original commit message from CVS:
* gst/playback/gstplaybin.c: (add_sink), (dummy_blocked_cb),
(setup_sinks):
Block the subtitle bin output queue before ghosting it and linking,
then unblock after. This avoids spurious not-linked errors caused
by the queue starting up (because it gets linked when it is ghosted).
Fixes: #350299
Original commit message from CVS:
* ext/cdparanoia/gstcdparanoiasrc.c:
(gst_cd_paranoia_src_read_sector):
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_create):
Small cleanups.
* ext/theora/theoradec.c: (theora_dec_sink_event):
Fix typo.
* gst-libs/gst/rtp/gstbasertpdepayload.c:
(gst_base_rtp_depayload_set_gst_timestamp):
Add some FIXME
* gst/playback/gstdecodebin.c: (queue_underrun_cb):
And some debug info when a FIXME path is hit.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (gst_decode_bin_factory_filter):
Make decodebin2 autoplug depayloaders too.
* gst/playback/gsturidecodebin.c: (source_new_pad):
Set the newly created decoder in a usable state when autoplugging a
dynamic source such as RTSP.
Original commit message from CVS:
* gst/playback/gststreaminfo.c: (cb_probe):
Ignore video-codec tag for audio streams and ignore audio-codec tags
for video streams. Should make codec name collection a bit more
robust against sloppy demuxers that send tag events containing both
tags down each pad.
