Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_negotiate_format),
(handle_sequence), (handle_slice), (gst_mpeg2dec_chain),
(gst_mpeg2dec_src_query), (gst_mpeg2dec_change_state):
Small cleanups in refcounting.
Original commit message from CVS:
* gst/realmedia/rmdemux.c: (gst_rmdemux_validate_offset),
(gst_rmdemux_perform_seek), (gst_rmdemux_src_query):
Set correct stream time in newsegment event.
Original commit message from CVS:
* ext/a52dec/Makefile.am:
* ext/a52dec/gsta52dec.c: (gst_a52dec_base_init),
(gst_a52dec_class_init), (gst_a52dec_sink_event),
(gst_a52dec_change_state):
* ext/a52dec/gsta52dec.h:
Re-enable CPU flags, use liboil to get them.
Original commit message from CVS:
* ext/amrnb/amrnbdec.c:
Mark invalid frame sizes
* ext/mad/gstmad.c: (gst_mad_init), (gst_mad_chain):
UNUSABLE is not to be used here, just push out stuff so
probes can continue linking or making the pad usable.
Original commit message from CVS:
* gst/realmedia/rmdemux.c: (gst_rmdemux_src_event),
(gst_rmdemux_perform_seek), (gst_rmdemux_loop),
(gst_rmdemux_send_event), (gst_rmdemux_add_stream),
(gst_rmdemux_parse_mdpr), (gst_rmdemux_parse_packet):
Real demuxer fixes. Make it more bulletproof against bad data,
identify a few more stream types.
Fix seeking so that it works (at least with the seek example
program; it still fails with totem).
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c:
(gst_mp3parse_sink_event), (gst_mp3parse_chain):
Set correct caps on buffers too.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c: (gst_mp3parse_init),
(gst_mp3parse_sink_event), (gst_mp3parse_chain):
* gst/mpegaudioparse/gstmpegaudioparse.h:
Put timestamps on buffers.
Original commit message from CVS:
Various changes to AC3->IEC958 framer. Mostly to make our IEC958 headers
more accurate, and to check AC3 checksums (both of them in each frame),
and dump the frame (as a probable sync failure) if they don't match.
General code cleanup, improved comments. Changed to not construct the
header backwards, and not byteswap everything else. If we end up needing
to do little-endian output, we should swap in the element doing the
output (AC3 is big-endian).
Original commit message from CVS:
* ext/amrnb/amrnbdec.c: (gst_amrnbdec_state_change):
* ext/amrnb/amrnbenc.c: (gst_amrnbenc_state_change):
* ext/amrnb/amrnbparse.c: (gst_amrnbparse_state_change):
State change function updates.
Original commit message from CVS:
Restructure LPCM decoder to not expect the demuxer to parse the LPCM
header; instead do this internally. Also support the old way, using
a different mime-type. CVS:
Original commit message from CVS:
2005-08-28 Andy Wingo <wingo@pobox.com>
* Updates for two-arg init from GST_BOILERPLATE.
* ext/ladspa/gstsignalprocessor.c (gst_signal_processor_init): Use
the second arg for the class, because G_OBJECT_GET_CLASS (self)
returns the wrong thing.
(gst_signal_processor_add_pad_from_template): Make pads of the
right type.
* ext/ladspa/gstladspa.c (gst_ladspa_class_get_param_spec): Make
writable param specs G_PARAM_CONSTRUCT so default values work.
(gst_ladspa_init): Use the second arg for the class.
Original commit message from CVS:
2005-08-26 Andy Wingo <wingo@pobox.com>
* ext/ladspa/gstladspa.c:
* ext/ladspa/gstladspa.h: Finish porting, still doesn't work but
it does compile and register. I have more features than you.
* ext/ladspa/gstsignalprocessor.h:
* ext/ladspa/gstsignalprocessor.c: Updates, bug fixen.
Original commit message from CVS:
2005-08-25 Andy Wingo <wingo@pobox.com>
* ext/ladspa/gstladspa.h:
* ext/ladspa/gstladspa.c: Halfway-ported. Doesn't compile yet.
* ext/ladspa/gstsignalprocessor.h:
* ext/ladspa/gstsignalprocessor.c: New files, the start of a base
class for DSP elements.
* configure.ac: Sort the external libs checks, add a ladspa check,
output the ladspa makefile.
Original commit message from CVS:
2005-08-24 Andy Wingo <wingo@pobox.com>
* ext/dv/gstdvdemux.c (gst_dvdemux_demux_frame): Send out valid
segment end timestamps.
(Also commit an old changelog entry)
Original commit message from CVS:
* configure.ac:
* ext/Makefile.am:
* ext/speex/Makefile.am:
* ext/speex/gstspeex.c: (plugin_init):
* ext/speex/gstspeexdec.c: (speex_get_query_types),
(gst_speex_dec_init), (speex_dec_src_query), (speex_dec_src_event),
(speex_dec_event), (speex_dec_chain):
Port speexdec. Leads to some unfamiliar warnings on console,
but works otherwise.
Original commit message from CVS:
2005-08-23 Andy Wingo <wingo@pobox.com>
* sys/oss/gstosssrc.c (gst_oss_src_open): Set the device-name
property after opening the mixer.
Original commit message from CVS:
2005-08-23 Andy Wingo <wingo@pobox.com>
* sys/oss/gstosssrc.c:
* sys/oss/gstosssrc.h: Easy to implement a mixer, eh...
Original commit message from CVS:
2005-08-23 Andy Wingo <wingo@pobox.com>
* sys/oss/gstossmixerelement.h:
* sys/oss/gstossmixerelement.c: Added mixer element like
alsamixer.
* sys/oss/Makefile.am:
* sys/oss/gstossaudio.c: Register the ossmixer element.
Original commit message from CVS:
* ext/mad/gstid3tag.c: (gst_id3_tag_init),
(gst_id3_tag_sink_event), (gst_id3_tag_do_caps_nego),
(gst_id3_tag_chain), (gst_id3_tag_change_state), (plugin_init):
Works a bit better now, but still needs a rewrite to use
get_range instead of this seeking nastiness.
Original commit message from CVS:
* gst/rtp/gstrtph263penc.c: (gst_rtph263penc_class_init),
(gst_rtph263penc_flush), (gst_rtph263penc_chain),
(gst_rtph263penc_set_property), (gst_rtph263penc_get_property):
* gst/rtp/gstrtph263penc.h:
Added configurable pt and ssrc, to be merged in the caps or
a base class...
Original commit message from CVS:
* gst/rtp/gstrtph263pdec.c: (gst_rtph263pdec_init),
(gst_rtph263pdec_chain):
* gst/rtp/gstrtph263penc.c: (gst_rtph263penc_class_init),
(gst_rtph263penc_flush), (gst_rtph263penc_chain):
Some cleanups in the h263p (de)payloaders.
Original commit message from CVS:
* ext/amrnb/amrnbdec.c:
* ext/amrnb/amrnbenc.c: (gst_amrnbenc_setcaps):
* ext/amrnb/amrnbparse.c:
Update caps with audio/AMR.
* gst/rtp/gstrtpamrdec.c: (gst_rtpamrdec_init),
(gst_rtpamrdec_sink_setcaps), (gst_rtpamrdec_chain),
(gst_rtpamrdec_change_state):
* gst/rtp/gstrtpamrdec.h:
* gst/rtp/gstrtpamrenc.c: (gst_rtpamrenc_class_init),
(gst_rtpamrenc_init), (gst_rtpamrenc_chain):
Dont set FT headers twice, it was already in the encoded
bitstream.
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_send), (gst_rtspsrc_open),
(gst_rtspsrc_close), (gst_rtspsrc_play):
* gst/rtsp/rtspconnection.c: (parse_line):
Cleanups
* gst/udp/gstudpsrc.c: (gst_udpsrc_class_init),
(gst_udpsrc_create), (gst_udpsrc_set_property),
(gst_udpsrc_get_property):
* gst/udp/gstudpsrc.h:
Added caps property, we need this soon to type the buffers.
Original commit message from CVS:
* gst/rtp/gstrtpamrdec.c: (gst_rtpamrdec_init),
(gst_rtpamrdec_chain):
Fix up amr depayloader a bit.
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_send), (gst_rtspsrc_open),
(gst_rtspsrc_close), (gst_rtspsrc_play):
Look for options result in Public and Allow header fields..
spec says Allow but some servers return Public...
Original commit message from CVS:
* gst/rtp/gstrtpamrenc.c: (gst_rtpamrenc_class_init),
(gst_rtpamrenc_init), (gst_rtpamrenc_chain),
(gst_rtpamrenc_set_property), (gst_rtpamrenc_get_property):
* gst/rtp/gstrtpamrenc.h:
Added payload_type and ssrc properties to the payloader.
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_send), (gst_rtspsrc_open),
(gst_rtspsrc_close), (gst_rtspsrc_play):
Options need to be stripped and are in the Public header field.
* gst/rtsp/rtspurl.c: (rtsp_url_parse):
Fix url / parsing...
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_send), (gst_rtspsrc_open),
(gst_rtspsrc_close), (gst_rtspsrc_play), (gst_rtspsrc_pause),
(gst_rtspsrc_change_state):
* gst/rtsp/gstrtspsrc.h:
* gst/rtsp/rtspdefs.c: (rtsp_method_as_text), (rtsp_find_method):
* gst/rtsp/rtspdefs.h:
* gst/rtsp/rtsptransport.c: (rtsp_transport_parse):
Handle RTSP defaults better.
Issue OPTIONS request to figure out what we are allowed to do.
Make the methods a bitfield so we can easily collect supported
options.
Fix rtsp_find_method.
Do proper RTSP connection shutdown.
Original commit message from CVS:
* gst/avi/gstavidemux.c: (gst_avi_demux_parse_stream),
(gst_avi_demux_stream_header):
* gst/qtdemux/qtdemux.c: (gst_qtdemux_change_state),
(gst_qtdemux_add_stream), (qtdemux_parse_tree):
Uncomment metadata and codec-name handling.
Original commit message from CVS:
2005-08-16 Andy Wingo <wingo@pobox.com>
* ext/raw1394/gstdv1394src.c (gst_dv1394src_iso_receive): Note
license info in the source code -- was only in the commit log
before.
* ext/dv/gstdvdec.h:
* ext/dv/gstdvdec.c: Only decodes systemstream=FALSE dv video --
old pipelines using dvdec should probably have a dvdemux first.
* ext/dv/gstdvdemux.h:
* ext/dv/gstdvdemux.c: Split out from dvdec, chunks the incoming
systemstream=TRUE data into frames, sets caps data, and spits out
PCM audio in addition to systemstream=FALSE video frames. Operates
in chain mode only for now; should make a getrange version as
well.
* ext/dv/gstdv.c: New file, registers the libgstdv plugin.
* ext/dv/Makefile.am: Library name changed to libgstdv. Split
dvdec into dvdemux and dvdec.
Original commit message from CVS:
* ext/mad/Makefile.am:
* gst/avi/Makefile.am:
* gst/effectv/Makefile.am:
* gst/udp/Makefile.am:
* gst/wavparse/Makefile.am:
Use -lgstfoo-@GST_MAJORMINOR@ instead of -lgstfoo-0.9
Original commit message from CVS:
* ext/jpeg/gstjpegdec.c: (gst_jpeg_dec_decode_indirect),
(gst_jpeg_dec_decode_direct), (gst_jpeg_dec_chain):
Fix decoding of pictures with certain uneven or unaligned
widths where jpeglib needs more horizontal padding than our
I420 buffers provide, resulting in blocky artifacts at the
left side of the picture (#164176).
Also make use of our shiny new GST_ROUND_N() macros.
Original commit message from CVS:
* ext/jpeg/gstjpegdec.c: (gst_jpeg_dec_init), (gst_jpeg_dec_chain),
(gst_jpeg_dec_change_state):
* ext/jpeg/gstjpegdec.h:
Fix crashes/invalid memory access for pictures that have a height
that is not a multiple of 16 (or rather: v_samp_factor * DCTSIZE).
Also fix the state change function for downwards state changes
(need to chain up to parent before destroying our resources, to
make sure pads get deactivated and our chain function isn't
running and using those very same resources in another thread).
The jpeg line buffer only needs to be v_samp_factor*DCTSIZE lines
per plane, not picture_height lines; allocate that on the stack.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_stream_headers),
(gst_wavparse_stream_data):
Add some fixes from 0.8 branch: allow 24/32bps songs and
blockalign samples to the header-specified size, if any
(#311070); error out on channels==0 or bitrate==0
(#309043, #304588).
Original commit message from CVS:
* ext/faad/gstfaad.c: (gst_faad_class_init), (gst_faad_setcaps):
Add debug category, remove Close() call that made it crash
whenever reusing, renegotiating or anything; Close() actually
free()s the handle and should only be called on READY->NULL.
* gst/qtdemux/qtdemux.c: (gst_qtdemux_loop_header):
Actually set caps on buffer (in addition to pad), also.
