Actually copy the codec data instead of copying nothing
and then bombing out because there's no data.
Fixes: gst-launch-1.0 audiotestsrc ! avenc_alac ! qtmux ! fakesink
https://bugzilla.gnome.org/show_bug.cgi?id=741783
When dealing with fragmented files, we will get more accurate duration
information via the mfra and moof atoms.
In order for playback to not stop at the initial duration (from the
moov atom), we need to check and update the various duration variables
when we find more information.
Fixes playback of fragmented files in pull mode
When seeking or finding the previous keyframe, do
comparisons against targets and segments using composition time
to correctly decide which sample times match.
Currently during header parsing, we scan through the entire file
and skip every moof+mdat chunk for fragmented mp4s, which makes
start-up incredibly slow. Instead, just stop at the first moof
chunk when have a moov, and start exposing the streams, so we
can go and start handling the moofs for real.
Empty segments in an edit list have a media_start time of -1,
as they don't actually play any media. Allow for that when
aligning to the reference stream in reverse play.
DTS delta is used to calculate sample duration. If buffer has missing DTS, we take either segment start or previous buffer end time, whichever is later.
This must only be done for non sparse streams, sparse streams can have gaps between buffers (which is handled later by adding extra empty buffer with duration that fills the gap)
https://bugzilla.gnome.org/show_bug.cgi?id=737095
The old default timescale of 1 millisecond produces irrational
numbers for a lot of framerate/audio-packet-duration multiples.
1/1800 is a nicer number, as it tends to produce better fractions
and therefore slightly higher accuracy overall
Change the way the output framerate is calculated
to ignore the first sample (which is sometimes truncated
in my testing) and use the new gst_video_guess_framerate()
function to recognise common standard framerates better.
Remove the code that was sorting the first 20 sample
durations and then ignoring the result.
This makes sense in DASH reverse playback, where the upstream dashdemux
will download DASH segments in reverse order, but push their buffers
forward to qtdemux and mark each segment start as DISCONT. This needs
to be forwarded downstream to the parser/decoder, otherwise it won't work.
https://bugzilla.gnome.org/show_bug.cgi?id=734443
When writing out a trak with an edit list, make sure the
overall file duration is also updated to reflect the
lengthening of the stream.
Add some more debug to qtdemux to warn about streams that
are longer than the file and get truncated.
Handle the transformation matrix cases where there are only simple rotations
(90, 180 or 270 degrees) and use a tag for those cases. This is a common scenario
when recording with mobile devices
https://bugzilla.gnome.org/show_bug.cgi?id=679522
They are very confusing for people, and more often than not
also just not very accurate. Seeing 'last reviewed: 2005' in
your docs is not very confidence-inspiring. Let's just remove
those comments.
It was used in the past in 0.10 when there was no explicit DTS
field in buffers, now we have it in 1.x series and we can
check it directly with GST_BUFFER_DTS_IS_VALID
Do not try to use subsequent buffer timestamps to calculate
sparse streams durations because the stream is sparse and
the buffers might not be 'time adjacent'. So rely on the
duration and give the option to the pad to provide
custom 'empty' buffers to represent the gaps in the
stream, this can vary on how the data is represented.
Right now, the only sparse stream supported is tx3g subtitles.
Make sure empty segments are used and pushed with a gap event
to represent its data (or lack of it)
Each QtSegment is mapped into a GstSegment with the corresponding
media range. For empty QtSegments a gap event is pushed instead
of GstBuffers and it advances to the next QtSegment.
To make this work with seeks, need to keep track of the starting
'base' to make sure it remains consistently increasing when
pushing new segment events.
For example: if a seek makes qtdemux start from 5s, the first
segment will have a base=0. When the next segment is activated,
its base time will be QtSegment.time - qtdemux.segment_base so
that it doesn't include the first 5s that weren't played and
shouldn't be accounted on the running time
This purposedly will remove the fix made for
https://bugzilla.gnome.org/show_bug.cgi?id=700264, at this
point it was decided to respect the gaps, even if they cause
a delay on playback, because that's the way the file was crafted.
https://bugzilla.gnome.org/show_bug.cgi?id=345830
Mov spec says it uses a pascal style string, while isomedia uses
a null terminated one. Store the current atoms flavor into the HDLR
to be able to generate the correct output.
https://bugzilla.gnome.org/show_bug.cgi?id=705982
Make it clear what should be handled purely by mss mode:
1) Expose the streams on the first moof as there are no moov atoms
2) Properly cleanup streams on flushes
Add a note about the meaning of upstream_newsegment and mss_mode
for future reference.
Make all other special fragment handling shared for both dash
and mss streams.
In a fragmented scenario, qtdemux is operating in push mode
and it gets a fragmented buffer. While processing its data
downstream gets unlinked (or a input-selector changes its
active pad and returns not-linked). Qtdemux stops processing
this fragment and returns not-linked upstream, leaving the
remaining data in its adapter.
When it gets an EOS it should make sure that all the data it
had received is pushed before pushing EOS.
Some buffers can have multiple moov atoms inside and the strategy
of using the gst_adapter_prev_pts timestamp to get the base timestamp
for the media of the fragment would fail as it would reuse the same
base timestamp for all moofs in the buffer instead of accumulating
the durations for all of them.
Heres a better explanation of the issue:
qtdemux receives a buffer where PTS(buf) = X
buf -> moofA | moofB | moofC
The problem was that PTS(buf) was used as the base timestamp for
all 3 moofs, causing all buffers to be X based. In this case we want
only moofA to be X based as it is what the PTS on buf means, and the
other moofB and moofC just use the accumulated timestamp from the
previous moofs durations.
To solve this, this patch uses gst_adapter_prev_pts distance
result, this allows qtdemux to calculate if it should use the
resulting pts or just accumulate the samples as it can identify
if the moofs belong to the same upstream buffer or not.
https://bugzilla.gnome.org/show_bug.cgi?id=719783
In SmoothStreaming fragmented scenario, the timestamps are calculated
starting from the fragment buffer timestamp. When there is a not-linked
return from downstream, qtdemux will return upstream and will keep the
non-pushed data into its adapter.
On a new fragment buffer pushed to qtdemux, the new buffer timestamp
would overwrite the previous one that should be used on the still
to be pushed buffers. Because of this, this patch will also
update the fragment_start timestamp from the adapter last pts
to make sure the moof and timestamps are in sync and will result
in correct timestamps for all fragments.
In the scenario of "mdat | moov (with fragmented artifacts)" qtdemux
could read the moov again after the mdat because it was considering the
media as a fragmented one.
To avoid this loop this patch makes it store
the last processed moov_offset to avoid parsing it again.
And it also checks if there are any samples to play before
resturning to the mdat, so that it knows there is new data to be played.
https://bugzilla.gnome.org/show_bug.cgi?id=691570
When parsing a trak only free streams on failures if those streams
were created locally. They could have been created from a previous
fragment, in this case we they have valid info from the other fragment.
Including pads.
https://bugzilla.gnome.org/show_bug.cgi?id=691570
As for text subtitles and as suggested in #712643, throw
away the 2 byte terminator packets that some encoders insert.
This will make things better when remuxing and causes generation
of gap events.
Clean up the handling of mp4s streams. Use the generic esds
descriptor function to extract the palette, instead of hard coding
a wrong magic offset.
Add some more size safety checks when parsing ES descriptors, and
replace magic numbers with the descriptive constants that are already
defined.
Enhance dump output for stsd atoms.
Streams from both bug 712643 and historic bug 568278 now both work
correctly.
Fixes: #712643
Assume a file with atoms in the following order: moov, mdat, moof,
mdat, moof ...
The first moov usually doesn't contain any sample entries atoms (or
they are all set to 0 length), because the real samples are signaled
at the moofs. In push mode, qtdemux parses the moov and then finds the mdat,
but then it has 0 entries and assumes it is EOS.
This patch makes it continue parsing in case it is a fragmented file so that
it might find the moofs and play the media.
https://bugzilla.gnome.org/show_bug.cgi?id=710623
In push mode, when qtdemux can't use a seek to skip the mdat buffer it has
to buffer it for later use.
The issue is that after parsing the next moov/moof, there might be some
trailing bytes from the next atom in the file. This data was being discarded
along with the already parsed moov/moof and playback would fail to continue
after the contents of this moov/moof are played.
This is particularly bad on fragmented files that have the mdat before the
corresponding moof. So you'd get:
mdat|moof|mdat|moof ...
When a moof was received, it usually came with some extra bytes that would
belong to the next mdat (because upstream doesn't care about atoms alignment).
So those bytes were being discarded and playback would fail.
This patch makes qtdemux store those extra bytes to reuse them later after the
mdat is emptied.
https://bugzilla.gnome.org/show_bug.cgi?id=710623
