Commit graph

471 commits

Author SHA1 Message Date
Seungha Yang
1551759cec qtdemux: Apply qtdemux debug category to gstisoff
.. instead of the use of default debug category.
And, make new header to declare the debug category

https://bugzilla.gnome.org/show_bug.cgi?id=791483
2018-01-29 18:40:02 +00:00
Alicia Boya García
ac46d5c2a3 qtdemux: Add more prose to the comment of gst_qtdemux_find_sample()
https://bugzilla.gnome.org/show_bug.cgi?id=792910
2018-01-25 20:40:46 +00:00
Edward Hervey
6e21faffe7 qtdemux: Push a GAP event if there's a second *or more*
And not "more than a second"
2017-12-13 12:06:49 +01:00
Edward Hervey
2e45926a96 qtdemux: Don't push GAP event if first buffer is within 1s
If we saw empty segments, we previously unconditionally pushed a
GAP event downstream regardless of the duration of that empty
segment.

In order to avoid issues with initial negotiation of downstream elements
(which would negotiate to something before receiving any data due to
that initial GAP event), check if there's at least a second of difference
(like we do for other GAP-related checks in qtdemux) before
deciding to push a GAP event downstream.
2017-12-13 11:35:37 +01:00
Edward Hervey
5c341f0980 qtdemux: Don't set pared=True on underspecified audio/mpeg
This *really* needs to go through a parser to figure out what the
exact content type is.
2017-12-13 10:21:17 +01:00
Florian Zwoch
b4ca81591c qtdemux: fix debug log for 'hvcC' codec_data
https://bugzilla.gnome.org/show_bug.cgi?id=784749
2017-12-02 13:46:29 +00:00
Edward Hervey
22ab222dbc qtdemux: Run gst-indent 2017-11-23 08:00:58 +01:00
Edward Hervey
d08e155ec8 qtdemux: Check presence of bitrate tags
Check whether the tag was present before printing it out

CID #1418501
2017-11-23 07:57:44 +01:00
Jan Schmidt
3ba556a54d qtdemux: Use new GST_SEQNUM_INVALID constant 2017-11-18 02:33:01 +11:00
Jun Xie
7c8aeff262 qtdemux: reset reused QtDemuxStream while parsing a new 'trak'
if QtDemuxStream is reused, then we need to reset it.

https://bugzilla.gnome.org/show_bug.cgi?id=788759
2017-11-17 11:49:24 +02:00
Seungha Yang
8aa5c59b5f isomp4: Add official fourcc for VP8 codec
fourcc for VP8 codec is "vp08" defined by spec. To follow it,
add it to demux and change legacy VP8 fourcc "VP80" to "vp08" in mux.
Also, enable sync table in case of VP8 codec.
See also https://www.webmproject.org/vp9/mp4/

https://bugzilla.gnome.org/show_bug.cgi?id=790026
2017-11-13 10:08:14 -05:00
Seungha Yang
93f19b19d2 isomp4: Add support VP9 codec
Add fourcc for VP9 codec and support it by qtdemux and qtmux
See also https://www.webmproject.org/vp9/mp4/

https://bugzilla.gnome.org/show_bug.cgi?id=790026
2017-11-13 10:08:14 -05:00
Sebastian Dröge
728a1629cf qtdemux: Fix compiler warning
qtdemux.c: In function ‘gst_qtdemux_configure_stream’:
qtdemux.c:7764:34: error: suggest parentheses around ‘&&’ within ‘||’ [-Werror=parentheses]
     if ((stream->n_samples == 1) && (stream->first_duration == 0)
         ~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2017-10-10 18:04:50 +03:00
Nael Ouedraogo
5874bafa4f qtdemux: fix assert when moof containing one sample
Avoid computing frame rate when a stream contain moof with only one
sample, to avoid an assert. The moof is considered as still picture.

The same is already done for one sample given in the moov.

https://bugzilla.gnome.org/show_bug.cgi?id=782217
2017-10-10 18:03:42 +03:00
Michael Olbrich
61429a78a8 qtdemux: allow larger files
For really long files such as contiguous recordings of a whole day, the
50MB limit is not sufficient.

https://bugzilla.gnome.org/show_bug.cgi?id=781458
2017-08-10 16:17:56 +03:00
Sebastian Dröge
7d89e73336 qtdemux: Fix offsets for reading lpcm specific fields
We were reading at the completely wrong positions, 16 bytes later in the
data.

Also add support for high-aligned samples.
2017-08-10 16:13:05 +03:00
Mark Nauwelaerts
7bd439efb5 qtdemux: preferably send open-ended segment rather than repeated segment events 2017-07-19 18:35:58 +02:00
Mark Nauwelaerts
854f85acb4 qtdemux: fix seeking in fragmented file without mfra random access info
... which no longer worked due to unconditionally clearing sample info and
ending up in inconsistent state.  Let's tread a bit more carefully and also
allow for the old seek handling that resorts to scanning if no mfra info
is available.
2017-07-19 18:35:49 +02:00
Sebastian Dröge
c0318f3d60 qtdemux: Fix parsing of RLE depth
Regression introduced by 86b427dc70

https://bugzilla.gnome.org/show_bug.cgi?id=784812
2017-07-13 12:47:27 +03:00
Tim-Philipp Müller
3a0fe9c2f5 qtmux: add support for muxing PNG
Demuxer already supported it.
2017-06-15 23:31:24 +01:00
Jimmy Ohn
55e0b18186 qtdemux: remove not needed code
remove not needed code about res variable.

https://bugzilla.gnome.org/show_bug.cgi?id=783422
2017-06-06 11:02:59 +02:00
Edward Hervey
4f713717de isomp4: Safely ignore [skip] atoms
Instead of warning about them
2017-05-18 18:12:15 +02:00
Seungha Yang
66448be77f qtdemux: Fix crash on mss stream caused by invalid stsd entry access
Since mss has no moov, default stsd entry should be created with media-caps.

https://bugzilla.gnome.org/show_bug.cgi?id=782042
2017-05-02 14:20:02 +03:00
Sebastian Dröge
875fc630d5 qtdemux: Don't crash in debug output if stream==NULL
That case is correctly handled below but not in the debug output.

https://bugzilla.gnome.org/show_bug.cgi?id=781270
2017-04-27 12:56:27 +03:00
Sebastian Dröge
a593e4966e qtdemux: Don't perform seeks with inconsistent seek values
If gst_segment_do_seek() fails, we shouldn't try seeking on that
resulting segment but just error out. Crashes further down the line
otherwise.
2017-04-25 17:12:30 +03:00
Jürgen Sachs
7c658c3c04 qtdemux: reset sample_description_id to default
Fixes stream where sample_description_id is specified in the tfhd

https://bugzilla.gnome.org/show_bug.cgi?id=778337
2017-04-21 06:45:10 +02:00
Edward Hervey
58e3033747 qtdemux: Reset adapter in more discontinuity cases
In push mode we process as much as possible in the adapter. When we receive
a DISCONT buffer which we can't match to an actual sample (based on the existing
sample table) and there is still data remaining in the incoming adapter,there is
one of two cases happening:
1) We are doing reverse playback, in which case we should flush out all pending
  data
2) We have leftover data from the previous incoming buffer... which we can't do
  anything about.

For the second case, make sure we flush out the remaining data so that we can start
parsing again from scratch.

https://bugzilla.gnome.org/show_bug.cgi?id=781319
2017-04-17 13:10:06 +02:00
Seungha Yang
3b9ea4b85f qtdemux: Fix leak on QtDemuxStreamStsdEntry
Fix unit test failure

https://bugzilla.gnome.org/show_bug.cgi?id=781362
2017-04-16 23:37:55 +01:00
Edward Hervey
c6e9c67f63 qtdemux: Properly reset demuxer when all streams are EOS
Make sure offset and neededbytes are properly resetted when all
streams are EOS in push-mode.

Avoids cases when some data might still be pushed by upstream (because
it didn't yet see the resulting GST_FLOW_EOS yet) and qtdemux gets
completely lost.

https://bugzilla.gnome.org/show_bug.cgi?id=781266
2017-04-13 13:26:36 +02:00
Jürgen Sachs
9684c88c60 qtdemux: fix: sample description index override in tfhd not evaluated
https://bugzilla.gnome.org/show_bug.cgi?id=778337
2017-04-12 11:04:46 +02:00
Edward Hervey
26f9869668 qtdemux: Add out-of-bound check
Make sure we don't read invalid memory
2017-04-12 11:03:24 +02:00
Thiago Santos
9ac3861a9b qtdemux: move parsing of tkhd out of stsd entry loop
It needs only to be read once.
2017-04-11 23:42:56 -07:00
Thiago Santos
cf6733a55e qtdemux: check for a different stsd entry before pushing a sample
Before pushing a sample, check if there was a change in the current
stsd entry. This patch also assumes that the first stsd entry is
used as default for the first sample. It might cause an uneeded
caps renegotiation when this isn't the case.
2017-04-11 23:42:56 -07:00
Thiago Santos
86b427dc70 qtdemux: parse all stsd entries
stsd can have multiple format entries, parse them all.

This is required to play DVB DASH profile that uses multiple entries
to identify the different available bitrates/options on dash streams

The stream format-specific data is not stored into QtDemuxStreamStsdEntry
2017-04-11 23:42:55 -07:00
Thiago Santos
54e252e095 qtdemux: rework stsd sample entries access
Instead of using the stsd as a base pointer, use the actual stsd
entry as the stsd can have multiple entries. This is rarely used
for file playback but is a possible profile with in DVB DASH specs.

This still doesn't support stsd with multiple entries but makes it
easier to do so.
2017-04-11 14:13:56 -07:00
Thiago Santos
bd32bcc36c qtdemux: get stsd child by index instead of type
There might be multiple children with the same type
2017-04-11 14:13:56 -07:00
Edward Hervey
1e4cdc6d6f qtdemux: Update variables before early exit
This is an update of d78d589627

We still exit as early as possible in case of non-ok/non-unlinked combined
flow, but we first make sure that we update the internal position variables.

This ensures that if upstreams "ignores" the flow return (and carries on pushing),
we don't end up processing data with completely bogus variables/positions.
2017-04-03 11:37:52 +02:00
Sebastian Dröge
2b50a338c3 qtdemux: In gap mode, consider the mdat offset when calculating the remaining mdat size
The mdat generally does not start at offset 0, we have to include the
size of the moof and whatever else was in front of the mdat.
2017-03-27 21:52:51 +03:00
Enrique Ocaña González
28a57d0586 qtdemux: distinguish TFDT with value 0 from no TFDT at all
TFDTs with time 0 are being ignored since commit 1fc3d42f. They're
mistaken with the case of not having TFDT, but those two cases
must be distinguished in some way.

This patch passes an extra boolean flag when the TFDT is present.
This is now the condition being evaluated, instead of checking for
0 time.

https://bugzilla.gnome.org/show_bug.cgi?id=780410
2017-03-23 08:28:53 +11:00
Jan Schmidt
d76bd1913f qtdemux: matroskademux: Ignore repeated seek events
Similar to what was done in adaptivedemux, ignore seek
events we've already handled - such as when they are received
on every srcpad of files with lots of streams.
2017-03-22 00:40:01 +11:00
Sebastian Dröge
a56a01f15f dashdemux: Update mdatleft from overall mdatsize and offset when observing a gap
Otherwise mdatleft will have a value calculated from the initial
mdatsize minus the parts of the stream that we saw, which is not
including all the parts of the stream that might've been skipped.
2017-03-21 14:56:55 +02:00
Emeric Grange
534be3313c qtmux: add CineForm support
https://bugzilla.gnome.org/show_bug.cgi?id=780024
2017-03-14 18:03:34 +02:00
Emeric Grange
7bdcd57980 qtdemux: add S16L support
https://bugzilla.gnome.org/show_bug.cgi?id=780022
2017-03-14 14:55:44 +02:00
Jan Schmidt
c82ced1868 qtdemux: Don't lose crypto info on a new moof
We parse the next moof in advance of having pushed
all samples from the previous one in some cases, and
we'll still need the crypto info from the previous
fragment so keep around any unused crypto info entries
when adding new ones
2017-03-04 00:35:32 +11:00
Sebastian Dröge
ce2070c092 qtdemux: Protect against NULL pointer dereference for streams without caps
CID 1363332
2017-02-28 15:20:31 +02:00
Sebastian Dröge
4c30cbfe22 qtdemux: Fix compilation with gcc 7
qtdemux.c: In function ‘qtdemux_parse_samples’:
qtdemux.c:8450:39: error: ‘*’ in boolean context, suggest ‘&&’ instead [-Werror=int-in-bool-context]
         if (stream->samples_per_frame * stream->bytes_per_frame) {
             ~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
2017-02-27 21:02:51 +02:00
Jan Schmidt
488e8edba4 Revert "qtdemux: Always snap to the start of the keyframe"
This reverts commit 107902ec51.

This commit intended to ensure that keyframe seeks land at the
start timestamp of a keyframe, rather than in the middle of one,
but they cause trouble on files with sparse streams, or with
JPEG 'cover art' tracks that have only one or a few JPEG samples
with very long durations.

That's still desirable for doing seamless cutting of videos,
but needs a rethink for implementation.

https://bugzilla.gnome.org/show_bug.cgi?id=778690
2017-02-17 13:19:58 +11:00
Tim-Philipp Müller
19c9600ea6 qtdemux: sanity check number of segments in edit list
Fixes crash with fuzzed file.

https://bugzilla.gnome.org/show_bug.cgi?id=777940
2017-01-31 20:46:41 +00:00
Seungha Yang
7a6752a7e0 qtdemux: Skip seeking query if upstream format is time
Don't need to querying byte-format seeking for time-format
upstream case

https://bugzilla.gnome.org/show_bug.cgi?id=776715
2017-01-31 17:09:29 +01:00
Seungha Yang
d3f5aa2689 qtdemux: Use upstream's StreamFlags if there are
When multiple demuxer's are used, upstream might want to indicate
default streams using GST_STREAM_FLAG_{SELECT, UNSELECT}

https://bugzilla.gnome.org/show_bug.cgi?id=775440
2017-01-31 16:20:42 +01:00