Julian Scheel
a0a184931a
tsdemux: Add language code to taglist.
...
Read the language codes for tracks from the mpegts descriptors and add it into
the pads taglist.
https://bugzilla.gnome.org/show_bug.cgi?id=673896
2012-05-22 18:13:30 +02:00
Edward Hervey
6bf54ff850
tsdemux: Adapt to new packetizer API
...
We no longer use GstBufferList and instead copy the incoming data
into newly allocated memory.
This makes tsdemux behaviour 3 to 4 times faster.
2012-05-22 17:43:38 +02:00
Julian Scheel
5536bcf8b8
tsdemux: flush on pusi only for payload packets
...
Data should not be flushed out of the tsdemux because a payload unit start
indicator (pusi) is seen in a adaptation only ts packet. If the package contains no
payload a pusi does not indicate a new PES packet, but PSI information, etc.
This fixes playback of several TS files which contain ts packets without
payload but with pusi set to 1.
https://bugzilla.gnome.org/show_bug.cgi?id=676168
2012-05-18 11:12:20 +02:00
Edward Hervey
e75612c3fd
tsdemux: Don't queue data for streams that don't have a pad
...
This would result in an error further down, and it also avoids processing
for that data which we wouldn't be using anyway.
2012-05-18 11:11:37 +02:00
Edward Hervey
fa4b92e743
tsdemux: Emit no-more-pads when all pads are activated
...
Fixes #670921 again
2012-05-18 11:11:25 +02:00
Raimo Järvi
93ad7a4d06
Fix printf format compiler warnings on mingw-w64
...
https://bugzilla.gnome.org/show_bug.cgi?id=675520
2012-05-05 19:45:42 +01:00
Wim Taymans
b56ab4b3cf
tsdemux: reset the state of the stream when flushing
...
We need to reset the stream on a flush or else old packets could be added to the
list and leak.
2012-05-01 11:47:52 +02:00
Gil Pedersen
fcd8155d87
mpegtsdemux: port to 0.11
...
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=674397
2012-04-20 11:25:31 +02:00
Gil Pedersen
095a17ad03
mpegtsdemux: fix memory leaks
...
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=674393
2012-04-20 11:25:31 +02:00
Julian Scheel
1059905237
tsdemux: Set currentlist to NULL after free.
...
This prevents double free of currentlist is some circumstances.
2012-04-18 09:30:22 +02:00
Alessandro Decina
f4b292f994
tsdemux: set correct newsegment fields on _TIME seeks
...
Forward the seek rate and set NS.start to the seek target so that decoders can
apply clipping where necessary.
2012-04-05 09:16:07 +02:00
Alessandro Decina
3b525d1147
tsdemux: reset iterator to NULL after it's free
...
Fixes possible invalid memory access in gst_ts_demux_stream_flush
2012-04-04 07:24:28 +02:00
Edward Hervey
6800d0c4e0
tsdemux: Clear bufferlist/iterator when removing streams
2012-04-02 15:26:28 +02:00
Edward Hervey
881350f34c
tsdemux: Fix several leaks
...
* dont' leak buffers when a stream is in discont state
* don't leak buffers when a program is removed/deactivated
* remove all programs when disposing
2012-03-30 19:20:17 +02:00
Edward Hervey
85878c142e
mpegts: Switch rank of mpegtsdemux and tsdemux
...
More effort has been put lately in tsdemux and works in more use cases
2012-03-05 09:46:17 +01:00
Edward Hervey
c557f71756
tsdemux: Push packets as early as possible
...
When the PES header tells us how big the outgoing packet is, push the
packet downstream as soon as we have the specified size instead of waiting
for the beginning of the next packet.
Reduces latency and removes issues with very sparse streams (like subtitles
and subpictures).
2012-03-05 09:41:48 +01:00
Edward Hervey
01f5f62d95
tsdemux: Fix segment start position
...
If we *really* can't figure out the first start position, that most
likely means the data to push out doesn't have any timestamp.
Use a default value of 0 then
2012-03-02 17:19:45 +01:00
Thibault Saunier
ece4dfc3c6
tsdemux: Activate pads only when receiving data for the stream
...
https://bugzilla.gnome.org/show_bug.cgi?id=670921
2012-03-02 17:19:45 +01:00
Edward Hervey
097f09b823
mpegtsbase/tsdemux: Refactor seek and segment handling
...
All calculations go through the mpegtspacketizer
Remove unused variables/code
2012-03-01 18:15:51 +01:00
Edward Hervey
d920d9d64f
tsdemux: Remove all seeking code
...
It was more than bogus
2012-03-01 18:15:51 +01:00
Thibault Saunier
f977d7e743
tsdemux: Avoid unlinkely leaks and segfault
2012-02-24 15:28:35 -03:00
Edward Hervey
b6d98aea5f
tsdemux: Use new clock skew estimation for outgoing timestamps
...
Only used in live mode
2012-02-24 17:53:52 +01:00
Edward Hervey
e6ff2f7b83
tsdemux: Various code cleanup and dead code removal
2012-02-24 17:52:33 +01:00
Thibault Saunier
48a699812b
tsdemux: Clean up AAC caps mess
2012-02-24 10:57:05 +01:00
Thibault Saunier
67fd590e9a
tsdemux: Support more DTS/AC3 descriptors
2012-02-24 10:56:58 +01:00
Edward Hervey
6ef0ae4ffe
tsdemux: Remove useless finalize()
2012-02-24 10:56:14 +01:00
Edward Hervey
8b73baeced
tsdemux: Use incoming timestamps in live mode
2012-02-23 16:39:48 +01:00
Edward Hervey
8f433e1677
tsdemux: Report latency (700ms)
2012-02-23 16:39:48 +01:00
Thibault Saunier
1182dd0c1b
tsdemux: Avoid throwing FLOW_ERROR on last PCR processing error
...
In the case of scanning last pcr, errors are not critical, so we keep
the stream flowing.
2012-02-15 15:48:44 -03:00
Thibault Saunier
cda0d3aed8
tsdemux: Add AAC latm support
2012-02-15 15:48:44 -03:00
Thibault Saunier
6094ec27b1
tsdemux: Minor refactoring/code cleaning
...
... add some debugging symbols in the mean time.
2012-02-15 15:48:44 -03:00
Vincent Penquerc'h
2dec0950cf
tsdemux: add explicit supported AAC stream-format in template caps
...
https://bugzilla.gnome.org/show_bug.cgi?id=665394
2012-02-02 12:37:02 +00:00
Mark Nauwelaerts
d8fdd3485b
mpegtsdemux: break out when stream identified
2012-01-23 14:22:18 +01:00
Edward Hervey
fcf511aa8f
tsdemux: Don't provide bogus values in non-TIME push-mode
...
Only take the upstream segment values in GST_FORMAT_TIME
2012-01-10 11:45:25 +01:00
Edward Hervey
24408bce96
tsdemux: Handle rollover in PTS and DTS
...
Also hands back-rollover which can happen with PTS
2012-01-10 11:45:22 +01:00
Vincent Penquerc'h
7521b597f4
various: fix pad template ref leaks
...
https://bugzilla.gnome.org/show_bug.cgi?id=662664
2011-11-28 13:08:27 +00:00
Edward Hervey
e500ec524c
tsdemux: Add notes on synchronization and scheduling
2011-11-16 12:47:58 +01:00
Youness Alaoui
894ac8f493
hlsdemux/tsdemux: Add HP copyright on work done on HLS
2011-09-09 12:12:12 +02:00
Youness Alaoui
59c61209cf
tsdemux: Need to flush all streams when we receive a flush-start
2011-08-30 16:17:47 +02:00
Sebastian Dröge
c86aba3469
tsdemux: Use FALSE instead of 0 for bool parameter
2011-08-24 09:35:18 +02:00
Youness Alaoui
744101a417
tsdemux: Need to send a newsegment after a seek
2011-08-24 08:12:29 +02:00
Youness Alaoui
cfd28a6f90
tsdemux: Forward seek/duration query/event to the sinkpad
2011-08-24 07:48:52 +02:00
Vincent Penquerc'h
66dbdfd4d1
tsdemux: do not try to compare a PCR with itself for statistics
...
Especially as one of the logs will cause a divide by zero.
https://bugzilla.gnome.org/show_bug.cgi?id=656927
2011-08-23 10:38:10 +02:00
Vincent Penquerc'h
b19a5ea1f3
tsdemux: do not keep a dangling pointer
...
When removing the current program, it will get freed by the
hash table removal callback, so ensure we clear our pointer
to it.
Fixes a crash later on in gst_ts_demux_push trying to access it.
https://bugzilla.gnome.org/show_bug.cgi?id=656927
2011-08-23 10:37:24 +02:00
Sebastian Dröge
a27b7b6712
tsdemux: First send SEEKING queries upstream
2011-08-23 09:40:16 +02:00
Sebastian Dröge
ca0df16d52
tsdemux: Send DURATION query upstream first
2011-08-23 09:27:23 +02:00
Youness Alaoui
818762e8fc
tsdemux: do not send a new-segment on stream removal
...
When a program is changed, stream_added is called which sets the
need_newsegment to TRUE, then stream_removed is called, which calls
the flush_pending_data, which checks for the newsegment and causes
it to send a new-segment.
We must not send the newsegment when flushing the pending data on the
removed stream. We should only push it when flushing data on the newly
added streams (after they finish parsing their PTS header)
2011-08-22 16:01:24 +02:00
Youness Alaoui
382710e200
tsdemux: Fix newsegment when switching programs
...
If a program/stream is changed, then a newsegment is sent which must
not be the same as the base segment since it happens later. We must
shift the start position by the time elapsed since the newsegment
and the current PTS of the stream
2011-08-22 16:01:17 +02:00
Youness Alaoui
4cc1dfb360
tsdemux: interpolate gap and fix timestamps depending on upstream segment
2011-08-22 15:55:47 +02:00
Edward Hervey
5c77682dab
tsdemux: Take into account upstream newsegment events
...
If the incoming newsegment event was in time, use that position value
for the downstream newsegments.
2011-08-01 18:49:55 +02:00