Commit graph

56 commits

Author SHA1 Message Date
Nicolas Dufresne
76775efe71 v4l2: Workaround driver not setting field correctly
As it's very common, handle driver not setting field in buffers
by using the field value from the format. This workaround a long time
bug in UVC driver. For even buggier driver, we simply assume
progressive as before. We also only warn once, to avoid spamming.
2015-03-01 14:03:04 -05:00
Nicolas Dufresne
6afd1c5d57 v4l2: Enable copy when no known allocation params
When there is no allocation parameters in the query, enable copy
threshold. When this threshold is reached, the buffer pool will start
copying when the pool reaches a critical level. If the driver supports
CREATE_BUFS, this will be used instead.
2015-02-19 23:16:00 -05:00
Nicolas Dufresne
b9992e4347 v4l2: Handle corrupted buffer with empty payload
This allow skipping buffer flagged with ERROR that has no payload.
This is typical behaviour when a recovererable error occured during
capture in the driver, but that no valid data was ever written into that
buffer. This patch also translate V4L2_BUF_FLAG_ERROR into
GST_BUFFER_FLAG_CORRUPTED. Hence decoding error produce
by decoder due to missing frames will now be correctly marked. Finally,
this fixes a buffer leak when EOS is reached.

https://bugzilla.gnome.org/show_bug.cgi?id=740040
2014-11-21 11:29:19 -05:00
Nicolas Dufresne
3f15e67923 v4l2bufferpool: Handle FD error during poll
This will ensure we fail earlier if something unrecoverable
happens.
2014-07-03 15:29:54 -04:00
Nicolas Dufresne
652ed3bceb v4l2bufferpool: Wait before polling if queue is empty
In kernel before 3.17, polling during queue underrun would unblock right
away and trigger POLLERR. As we are not handling POLLERR, we would endup
blocking in DQBUF call, which won't be unblocked correctly when going
to NULL state. A deadlock at start caused by locking error in libv4l2 was
also seen before this patch. Instead, we wait until the queue is no longer
empty before polling.

https://bugzilla.gnome.org/show_bug.cgi?id=731015
2014-07-03 15:28:45 -04:00
Nicolas Dufresne
e2fd7e274e v4l2bufferpool: Port to bufferpool flush_start/stop method
Port the buffer pool to use the new flush_start/flush_stop virtual
methods added to GstBufferPool.

https://bugzilla.gnome.org/show_bug.cgi?id=727611
2014-05-26 13:43:30 -04:00
Nicolas Dufresne
66519d08b0 v4l2: Cleanup and fix calculation of latency
Calculation of num_buffers (the max latency in buffers) was
up-side-down.  If we can allcoate, then our maximum latency match
pool maximum number of buffers. Also renamed it to max latency. Finally
introduced a min_latency for clarity.
2014-05-25 00:04:44 -04:00
Nicolas Dufresne
2e89f4ecff Revert "v4l2bufferpool: Port to bufferpool flush_start/stop method"
This reverts commit 2e0fb42e86.

Conflicts:
	sys/v4l2/gstv4l2allocator.c
	sys/v4l2/gstv4l2bufferpool.c
	sys/v4l2/gstv4l2videodec.c
2014-05-24 20:00:14 -04:00
Nicolas Dufresne
2e0fb42e86 v4l2bufferpool: Port to bufferpool flush_start/stop method 2014-05-24 15:38:53 -04:00
Nicolas Dufresne
a4b5811d22 v4l2: Split flush in start/stop_streaming
This allow calling start streaming later for capture device. Currently it breaks
in dmabuf-import because downstream is holding a buffer that will only be
released after stream-start.

https://bugzilla.gnome.org/show_bug.cgi?id=730207
2014-05-15 12:21:44 -04:00
Nicolas Dufresne
de7e5e481d v4l2bufferpool: Use default VideoInfo for frame operation
When doing frame operation, we need to use the default VideoInfo
and let the frame API read the video meta in order to get the stride
and offset right. Currently we where using the specialized VideoInfo
which reflects what the HW is setup to.
2014-05-12 18:08:19 -04:00
Nicolas Dufresne
82a806e63b v4l2: Replace miss-use of crop meta in favour of proper offset
This moves away from copying information and store everything inside
the GstVideoInfo structure. The alignement exposed by v4l2 api
is now handled using proper offset.
2014-05-08 15:56:37 -04:00
Nicolas Dufresne
f3ecbeb577 v4l2bufferpool: Get number of allocated buffers from allocator
The value of num_allocated buffer would get confused when
buffer are being discarded.
2014-05-08 15:56:37 -04:00
Nicolas Dufresne
c7d735a596 v4l2bufferpool: Ensure we don't re-enqueue buffer during flush 2014-05-08 15:56:37 -04:00
Nicolas Dufresne
815c9b7d35 v4l2bufferpool: Acquire cannot return a buffer from another pool
Return a buffer from an otherpool has unwanted side effects that lead to leaks and
prevents deactivating the pool. Instead, we change the _process() API so it can
replace the internal buffer with the buffer from the downstream pool. This implied
moving from _fill() to _create() method in the src.
2014-05-08 15:56:37 -04:00
Nicolas Dufresne
92bdd596f2 v4l2: Add DMABUF and USERPTR importation 2014-05-08 15:56:36 -04:00
Nicolas Dufresne
7b8bb7188b v4l2bufferpool: Turn cropmeta into a custom option
Turn crop meta into a custom option and make sure it's there is needed.
2014-05-08 15:56:36 -04:00
Nicolas Dufresne
2b0ac06ade v4l2bufferpool: Port to use GstV4l2Allocator 2014-05-08 15:56:36 -04:00
Nicolas Dufresne
a7286563ee v4l2: Add initial support for alignment and cropping 2014-05-08 15:56:35 -04:00
Julien Isorce
c701dcd16c v4l2bufferpool: add gst_v4l2_buffer_pool_flush
STREAMOFF set all v4l2buffers to DEQUEUE state.

Then for CAPTURE we call QBUF on each buffer.
For OUTPUT the buffers are just push back in the GstBufferPool
base class 's queue.
But the loop actually looks like the same.

https://bugzilla.gnome.org/show_bug.cgi?id=720568
2014-01-10 17:20:21 -05:00
Julien Isorce
303cec48db v4l2: refactor by emulating one v4l2_plane in non-MPLANE mode
so that the buffer informations can be retrieved the same way
in both MPLANE and non-MPLANE mode.

Here "emulating" means "manually fill in the plane".

Fixes bug https://bugzilla.gnome.org/show_bug.cgi?id=712754
2013-12-04 09:28:08 +00:00
Julien Isorce
61ae84b50d v4l2: add support for multi-planar V4L2 API
This api is in linux kernel since version 2.6.39,
and present in all version 3.

The commit that adds the API in master branch of the
linux kernel source is:
f8f3914cf9

v4l2 doc: "Some devices require data for each input
or output video frame to be placed in discontiguous
memory buffers"

There are newer structures 'struct v4l2_pix_format_mplane'
and 'struct v4l2_plane'.
So the pixel format is not setup with the same API when using
multi-planar.

Also for gst-v4l2, one of the difference is that in GstV4l2Meta
there are now one mem pointer for each maped plane.

When not using multi-planar, this commit takes care of keeping
the same code path than previously. So that the 2 cases are
in two different blocks triggered from V4L2_TYPE_IS_MULTIPLANAR.

Fixes bug https://bugzilla.gnome.org/show_bug.cgi?id=712754
2013-12-04 09:27:20 +00:00
Olivier Crête
19021e7176 v4l2: Remove commented out line 2013-09-19 17:39:17 -04:00
Michael Olbrich
1e777ede92 v4l2: try to allocate new buffers with VIDIOC_CREATE_BUFS if needed
If max_buffers is 0 then an arbitrary number of buffers (currently 4) is
allocated. If this is not enough v4l2src starts copying buffers.
With this patch VIDIOC_CREATE_BUFS is used to allocate a new buffer. If
this fails v4l2src falls back to copying buffers.

https://bugzilla.gnome.org/show_bug.cgi?id=699447
2013-05-03 11:18:04 +02:00
Tim-Philipp Müller
230cf41cc9 Fix FSF address
https://bugzilla.gnome.org/show_bug.cgi?id=687520
2012-11-04 00:07:18 +00:00
Wim Taymans
eecb9a96a6 v4l2: Improve buffer management
Query the amount of available buffers when doing set_config(). This allows us to
configure the parent bufferpool with the number of buffers to preallocate.
Keep track of the provided allocator and use it when we need to allocate a
buffer in RW mode.
When we are can not allocate the requested max_buffers amount of buffers, make
sure we keep 2 buffers around in the pool and copy them into an output buffer.
This makes sure that we always have a buffer to capture into. We also need to
detect those copied buffers and unref them when they return to the pool.
2012-04-23 18:10:33 +02:00
Wim Taymans
fa436c0799 v4l2: called base class start
Chain up to the base class start method so that metadata is properly tagged.
Remove an unused variable.

fixes: https://bugzilla.gnome.org/show_bug.cgi?id=672813
2012-03-26 15:33:59 +02:00
Wim Taymans
ecaea36c3d update for memory api changes 2012-03-15 13:36:17 +01:00
Wim Taymans
751fcf035b take padding into account 2012-03-14 19:56:56 +01:00
Wim Taymans
9c789aa434 update for metadata API changes 2012-02-29 17:26:01 +01:00
Wim Taymans
b1ef7e8a86 update for meta api change 2011-11-02 09:06:37 +01:00
Wim Taymans
add1cbdbd8 v4l2: activate the pool in fallback
When nobody is using our pool, activate it ourselves.
Avoid leaking the buffer array.
Set default pool configuration with caps.
Don't keep current_caps, core does that for us now.
2011-08-04 12:56:47 +01:00
Wim Taymans
63fc64dd98 v4l2: remove unused variables
Use the more specialized type for the bufferpool.
Use the size from the driver as the size of the image to read.
Don't configure the pool when created. This will be done in the setup_allocation
method later or by upstream for sinks.
Remove unused properties and variables. Bufferpool sizes are now configured in
the bufferpool by the elements in the pipeline. We might want to influence the
pool size later somehow.
2011-07-27 16:46:46 +02:00
Wim Taymans
b638bb4735 v4l2bufferpool: remove unused variable 2011-07-27 13:46:09 +02:00
Wim Taymans
fcfdececce bufferpool: check for metadata
Only add video metadata when it was configured in the pool. Fail if there was no
video metadata configured and the strides are not the default ones.
2011-07-27 13:41:28 +02:00
Wim Taymans
9a8f1c4339 v4l2: remove unused method 2011-07-25 15:51:22 +02:00
Wim Taymans
0a88ac4c92 v4l2: dequeue buffers when all are queued
Prefer to always use the default bufferpool queue for the _acquire function
because it properly supports unblocking when setting inactive etc. As a result,
we need to dequeue buffers and put them back in the bufferpool queue when we
have queued all buffers in the sink.
Rename some variables to more meaningfull names to avoid a problem with
freeing the wrong amount of buffers.
2011-07-25 14:47:05 +01:00
Wim Taymans
55eb26f1e7 v4l2: More work on bufferpools
Add different transport methods to the bufferpool (MMAP and READ/WRITE)
Do more parsing of the bufferpool config.
Start and stop streaming based on the bufferpool state.
Make separate methods for getting a buffer from the pool and filling it with
data. This allows us to fill buffers from other pools too. Either use copy or
read to fill up the target buffers.
Add property to force a transfer mode in v4l2src.
Increase default number of buffers to 4.
Negotiate bufferpool and its properties in v4l2src.
2011-07-18 18:54:49 +02:00
Wim Taymans
b1378f159a v4l2: dequeue buffers for the sink
When we have all buffers queued for playback and we need a new empty buffer,
dequeue one and return it.
Set the right size for sink buffers.
Improve counting of queued buffers.
2011-07-15 13:07:11 +01:00
Wim Taymans
21f532ae10 v4l2: convert to GstBufferPool
Extend from GstBufferPool.
Handle the lifetime of the pool buffers correctly with the start/stop vmethods.
Map acquire and release directly to QBUF and DQBUF. We still expose an explicit
qbuf for the v4l2sink for now.
2011-07-15 11:27:18 +02:00
Wim Taymans
33d93069c1 v4l2: Move output details to device object
Move the details of how a buffer is rendered to the device object.
2011-07-14 16:12:15 +02:00
Wim Taymans
d9e61954a1 v4l2: Let the device object manage the pool
Rename start and stop methods to open and close because that is what they do.
After setting the format on the device object, setup the bufferpools. Move this
code from the v4l2src_calls.c file, it is shared between source and sink.
Make new device start and stop method that merges various bits of common code
spread over several files.
2011-07-13 16:33:58 +02:00
Wim Taymans
be83e4f704 v4l2: small cleanups 2011-07-13 13:15:16 +02:00
Wim Taymans
0dcf0aebb0 v4l2: Let the bufferpool own the V4l2Object
Keep track of the currently configured format and setting in the
v4l2object.
Pass the v4l2object to the bufferpool constructor so that the bufferpool can
know everything about the currently configured settings. This also allows us
to remove some awkward code.
2011-07-12 18:13:42 +02:00
Wim Taymans
f55656dcfc v4l: remove caps argument, it's not needed
Remove the caps parameter, we don't need it anymore because we don't set
caps on buffers anymore.
2011-07-12 17:06:41 +02:00
Wim Taymans
851f550003 v4l2: various cleanups
Various cleanups, avoids useless casts, move error handling outside of the main
code flow.
Negotiate to a resonable resolution instead of the max resolution.
2011-07-11 12:15:12 +02:00
Wim Taymans
7a296af37f v4l2: port and enable v4l2sink 2011-07-08 16:10:47 +02:00
Wim Taymans
e20d6f0bb5 v4l2: port to 0.11 2011-07-08 12:49:12 +02:00
Wim Taymans
9c08bde90b meta: fix for new API 2011-02-28 11:58:49 +01:00
Wim Taymans
f229f4d192 metadata: use metadata for private buffer data
Use buffer metadata to store element private data.
2011-02-28 11:58:49 +01:00