Original commit message from CVS:
* gst/audiofx/audiochebyshevfreqband.c:
* gst/audiofx/audiochebyshevfreqlimit.c:
Add small comparision with the windowed sinc filters in the docs.
Original commit message from CVS:
* gst/filter/gstbpwsinc.c: (gst_bpwsinc_class_init),
(bpwsinc_set_property), (bpwsinc_get_property):
* gst/filter/gstbpwsinc.h:
* gst/filter/gstlpwsinc.c: (gst_lpwsinc_class_init),
(gst_lpwsinc_init), (lpwsinc_build_kernel), (lpwsinc_set_property),
(lpwsinc_get_property):
* gst/filter/gstlpwsinc.h:
* tests/check/elements/lpwsinc.c: (GST_START_TEST):
Use generator macros for the process functions for the different
sample types, add lower upper boundaries for the GObject properties
so automatically generated UIs can use sliders and change frequency
properties to floats to save a bit of memory, even ints would in
theory be enough. Also rename frequency to cutoff for consistency
reasons.
* docs/plugins/gst-plugins-bad-plugins.args:
* docs/plugins/gst-plugins-bad-plugins.signals:
* docs/plugins/inspect/plugin-gstrtpmanager.xml:
Regenerated for the above changes.
Original commit message from CVS:
* gst/audiofx/audiochebyshevfreqband.c:
(gst_audio_chebyshev_freq_band_class_init):
* gst/audiofx/audiochebyshevfreqlimit.c:
(gst_audio_chebyshev_freq_limit_class_init):
Use generator macros for the process functions for the different
sample types, add lower upper boundaries for the GObject properties
so automatically generated UIs can use sliders and add a note about
the number of poles as a too high number of poles combined with
very low or very high frequencies will produce only noise.
* docs/plugins/gst-plugins-good-plugins.args:
Regenerated for the property changes.
Original commit message from CVS:
* gst/filter/gstbpwsinc.c: (gst_bpwsinc_class_init),
(gst_bpwsinc_init), (process_32), (process_64),
(bpwsinc_build_kernel), (bpwsinc_push_residue),
(bpwsinc_transform), (bpwsinc_start), (bpwsinc_query),
(bpwsinc_query_type), (bpwsinc_event), (bpwsinc_set_property):
* gst/filter/gstbpwsinc.h:
Implement latency query and only forward those samples downstream
that actually contain the data we want, i.e. drop kernel_length/2
in the beginning and append kernel_length/2 (created by convolving
the filter kernel with zeroes) to the end.
* tests/check/elements/bpwsinc.c: (GST_START_TEST):
Adjust the unit test for this slightly changed behaviour.
* gst/filter/gstlpwsinc.c: (lpwsinc_build_kernel):
Reset residue length only when actually creating a residue.
Original commit message from CVS:
* gst/filter/gstlpwsinc.c: (gst_lpwsinc_class_init),
(gst_lpwsinc_init), (process_32), (process_64),
(lpwsinc_build_kernel), (lpwsinc_push_residue),
(lpwsinc_transform), (lpwsinc_start), (lpwsinc_query),
(lpwsinc_query_type), (lpwsinc_event), (lpwsinc_set_property):
* gst/filter/gstlpwsinc.h:
Implement latency query and only forward those samples downstream
that actually contain the data we want, i.e. drop kernel_length/2
in the beginning and append kernel_length/2 (created by convolving
the filter kernel with zeroes) to the end.
* tests/check/elements/lpwsinc.c: (GST_START_TEST):
Adjust the unit test for this slightly changed behaviour.
Original commit message from CVS:
* gst/filter/gstbpwsinc.c: (bpwsinc_build_kernel):
* gst/filter/gstlpwsinc.c: (lpwsinc_build_kernel):
Improve debugging a bit.
Original commit message from CVS:
* gst/filter/gstbpwsinc.c: (gst_bpwsinc_class_init),
(bpwsinc_start):
* gst/filter/gstlpwsinc.c: (gst_lpwsinc_class_init),
(lpwsinc_start):
Reset the residue in BaseTransform::start to get a clean residue
on stream changes.
Original commit message from CVS:
* gst/filter/gstbpwsinc.c: (process_32), (process_64):
* gst/filter/gstlpwsinc.c: (process_32), (process_64):
Fix processing with buffer sizes that are larger than the filter
kernel size.
Original commit message from CVS:
* gst/filter/gstbpwsinc.c: (bpwsinc_build_kernel):
Fix a segfault with more than one channel and don't rebuild
the kernel & residue with every buffer.
Original commit message from CVS:
* gst/filter/gstbpwsinc.c: (gst_bpwsinc_mode_get_type),
(gst_bpwsinc_window_get_type), (gst_bpwsinc_class_init),
(gst_bpwsinc_init), (bpwsinc_build_kernel), (bpwsinc_set_property),
(bpwsinc_get_property):
* gst/filter/gstbpwsinc.h:
Add support for a bandreject mode and allow specifying the window
function that should be used.
* gst/filter/gstlpwsinc.c:
And another small formatting fix.
Original commit message from CVS:
* gst/filter/gstbpwsinc.c: (gst_bpwsinc_class_init),
(gst_bpwsinc_init), (process_32), (process_64),
(bpwsinc_build_kernel), (bpwsinc_setup), (bpwsinc_get_unit_size),
(bpwsinc_transform), (bpwsinc_set_property),
(bpwsinc_get_property):
* gst/filter/gstbpwsinc.h:
Apply the same changes to the bandpass filter:
- Support double input
- Fix processing for input with >1 channels
- Specify frequency in Hz
- Specify actual filter kernel length
- Use transform instead of transform_ip as we're working
out of place anyway
- Factor out filter kernel generation and update the filter
kernel when the properties are set
Fix bandpass filter kernel generation to actually generate
a bandpass filter by creating a highpass instead of a second
lowpass.
* gst/filter/gstlpwsinc.c: (gst_lpwsinc_class_init):
Small formatting fix.
Original commit message from CVS:
* gst/filter/gstlpwsinc.c: (gst_lpwsinc_class_init),
(gst_lpwsinc_init), (process_32), (process_64),
(lpwsinc_build_kernel), (lpwsinc_set_property),
(lpwsinc_get_property):
* gst/filter/gstlpwsinc.h:
Specify the actual filter length instead of a weird
2N+1. Setting the property will round to the next odd number.
Also remove now obsolete FIXMEs.
Original commit message from CVS:
* gst/filter/gstlpwsinc.c: (gst_lpwsinc_window_get_type),
(gst_lpwsinc_class_init), (gst_lpwsinc_init),
(lpwsinc_build_kernel), (lpwsinc_set_property),
(lpwsinc_get_property):
* gst/filter/gstlpwsinc.h:
Allow choosing between hamming and blackman window. The blackman
window provides a better stopband attenuation but a bit slower
rolloff.
Original commit message from CVS:
* gst/filter/gstlpwsinc.c: (process_32), (process_64),
(lpwsinc_build_kernel):
Fix processing if the input has more than one channel.
Original commit message from CVS:
* gst/filter/gstbpwsinc.c: (gst_bpwsinc_dispose),
(gst_bpwsinc_init), (bpwsinc_setup), (bpwsinc_transform_ip),
(bpwsinc_set_property), (bpwsinc_get_property):
"this" is a C++ keyword, use "self" instead.
Add TODOs and FIXMEs and remove two wrong FIXMEs.
* gst/filter/gstlpwsinc.c:
Add FIXMEs and a new TODO.
Original commit message from CVS:
* gst/filter/gstlpwsinc.c: (gst_lpwsinc_dispose),
(gst_lpwsinc_class_init), (gst_lpwsinc_init), (process_32),
(process_64), (lpwsinc_build_kernel), (lpwsinc_setup),
(lpwsinc_get_unit_size), (lpwsinc_transform),
(lpwsinc_set_property), (lpwsinc_get_property):
* gst/filter/gstlpwsinc.h:
Add double support, replace "this" with "self" as the former
is a C++ keyword.
Implement the frequency property in Hz instead of fraction
of sampling frequency.
Remove some unecessary FIXMEs and add some TODOs, add some
required locking and refactor the kernel generation into a
separate function that is also called when the properties
change now.
And use BaseTransform::transform instead of transform_ip
as the convolution is done out of place anyway. Should
be done in place later.
Original commit message from CVS:
* gst/filter/Makefile.am:
* gst/filter/gstbpwsinc.c: (gst_bpwsinc_dispose),
(gst_bpwsinc_base_init), (gst_bpwsinc_class_init),
(gst_bpwsinc_init), (bpwsinc_setup):
* gst/filter/gstbpwsinc.h:
* gst/filter/gstlpwsinc.c: (gst_lpwsinc_dispose),
(gst_lpwsinc_base_init), (gst_lpwsinc_class_init),
(gst_lpwsinc_init), (lpwsinc_setup):
* gst/filter/gstlpwsinc.h:
Use GstAudioFilter as base class and don't leak the memory
of the filter kernel and residue.
Original commit message from CVS:
* gst/audiofx/audioamplify.c: (gst_audio_amplify_init),
(gst_audio_amplify_setup), (gst_audio_amplify_transform_ip):
* gst/audiofx/audiodynamic.c:
(gst_audio_dynamic_set_process_function), (gst_audio_dynamic_init),
(gst_audio_dynamic_setup), (gst_audio_dynamic_transform_ip):
* gst/audiofx/audiodynamic.h:
* gst/audiofx/audioinvert.c: (gst_audio_invert_init),
(gst_audio_invert_setup), (gst_audio_invert_transform_ip):
* gst/audiofx/audioinvert.h:
Don't save format information ourselves, this is already saved in
GstAudioFilter.
Original commit message from CVS:
* gst/audiofx/audioamplify.c: (gst_audio_amplify_transform_ip):
* gst/audiofx/audiodynamic.c: (gst_audio_dynamic_transform_ip):
* gst/audiofx/audioinvert.c: (gst_audio_invert_transform_ip):
Sync the GObject properties before each processing step to properly
work with the controller.
Original commit message from CVS:
reviewed by: Stefan Kost <ensonic@users.sf.net>
* gst/audiofx/Makefile.am:
* gst/audiofx/audiodynamic.c:
(gst_audio_dynamic_characteristics_get_type),
(gst_audio_dynamic_mode_get_type),
(gst_audio_dynamic_set_process_function),
(gst_audio_dynamic_base_init), (gst_audio_dynamic_class_init),
(gst_audio_dynamic_init), (gst_audio_dynamic_set_property),
(gst_audio_dynamic_get_property), (gst_audio_dynamic_setup),
(gst_audio_dynamic_transform_hard_knee_compressor_int),
(gst_audio_dynamic_transform_hard_knee_compressor_float),
(gst_audio_dynamic_transform_soft_knee_compressor_int),
(gst_audio_dynamic_transform_soft_knee_compressor_float),
(gst_audio_dynamic_transform_hard_knee_expander_int),
(gst_audio_dynamic_transform_hard_knee_expander_float),
(gst_audio_dynamic_transform_soft_knee_expander_int),
(gst_audio_dynamic_transform_soft_knee_expander_float),
(gst_audio_dynamic_transform_ip):
* gst/audiofx/audiodynamic.h:
* gst/audiofx/audiofx.c: (plugin_init):
Add new audiodynamic element which can act as a compressor or
expander. Supported are hard-knee and soft-knee operation modes with
user-specified ratio and threshold.
Attack and release parameters are not yet implemented but will follow.
* docs/plugins/Makefile.am:
* docs/plugins/gst-plugins-good-plugins-docs.sgml:
* docs/plugins/gst-plugins-good-plugins-sections.txt:
* docs/plugins/gst-plugins-good-plugins.args:
* docs/plugins/inspect/plugin-audiofx.xml:
Integrate audiodynamic into the docs.
* tests/check/Makefile.am:
* tests/check/elements/audiodynamic.c: (setup_dynamic),
(cleanup_dynamic), (GST_START_TEST), (dynamic_suite), (main):
Add unit test for audiodynamic.
Original commit message from CVS:
* gst/audiofx/audioamplify.c: (gst_audio_amplify_base_init),
(gst_audio_amplify_class_init), (gst_audio_amplify_init),
(gst_audio_amplify_set_process_function),
(gst_audio_amplify_setup):
* gst/audiofx/audioamplify.h:
* gst/audiofx/audioinvert.c: (gst_audio_invert_base_init),
(gst_audio_invert_class_init), (gst_audio_invert_setup):
* gst/audiofx/audioinvert.h:
Some small cleanups and port both elements to the new GstAudioFilter
base class to save a few lines of common code.
* gst/audiofx/Makefile.am:
Link against libgstaudio for the above changes
Original commit message from CVS:
reviewed by: Stefan Kost <ensonic@users.sf.net>
* gst/audiofx/Makefile.am:
* gst/audiofx/audioamplify.c:
(gst_audio_amplify_clipping_method_get_type),
(gst_audio_amplify_base_init), (gst_audio_amplify_class_init),
(gst_audio_amplify_init), (gst_audio_amplify_set_process_function),
(gst_audio_amplify_set_property), (gst_audio_amplify_get_property),
(gst_audio_amplify_set_caps),
(gst_audio_amplify_transform_int_clip),
(gst_audio_amplify_transform_int_wrap_negative),
(gst_audio_amplify_transform_int_wrap_positive),
(gst_audio_amplify_transform_float_clip),
(gst_audio_amplify_transform_float_wrap_negative),
(gst_audio_amplify_transform_float_wrap_positive),
(gst_audio_amplify_transform_ip):
* gst/audiofx/audioamplify.h:
* gst/audiofx/audiofx.c: (plugin_init):
Add new element "audioamplify". This allows scaling of raw audio
samples, similar to the "volume" element, but provides different modes
for clipping and allows unlimited amplification. It's mainly targeted
for creative sound design and not as a replacement of the "volume"
element. Fixes#397162
* docs/plugins/Makefile.am:
* docs/plugins/gst-plugins-good-plugins-docs.sgml:
* docs/plugins/gst-plugins-good-plugins-sections.txt:
* docs/plugins/gst-plugins-good-plugins.args:
* docs/plugins/inspect/plugin-audiofx.xml:
Add docs for audioamplify and integrate them into the build system
* tests/check/Makefile.am:
* tests/check/elements/audioamplify.c: (setup_amplify),
(cleanup_amplify), (GST_START_TEST), (amplify_suite), (main):
Add fairly extensive unit test suite for audioamplify
Original commit message from CVS:
reviewed by: Stefan Kost <ensonic@users.sf.net>
* gst/audiofx/Makefile.am:
* gst/audiofx/audiofx.c: (plugin_init):
* gst/audiofx/audioinvert.c: (gst_audio_invert_base_init),
(gst_audio_invert_class_init), (gst_audio_invert_init),
(gst_audio_invert_set_property), (gst_audio_invert_get_property),
(gst_audio_invert_set_caps), (gst_audio_invert_transform_int),
(gst_audio_invert_transform_float),
(gst_audio_invert_transform_ip):
* gst/audiofx/audioinvert.h:
Add new audiofx element "audioinvert". This element swaps the upper
and lower half of samples and can be used for example for a
wide-stereo effect. Fixes#396057
* docs/plugins/Makefile.am:
* docs/plugins/gst-plugins-good-plugins-docs.sgml:
* docs/plugins/gst-plugins-good-plugins-sections.txt:
* docs/plugins/gst-plugins-good-plugins.args:
* docs/plugins/inspect/plugin-audiofx.xml:
Add docs for the audioinvert element and add them to the build system.
* tests/check/Makefile.am:
* tests/check/elements/audioinvert.c: (setup_invert),
(cleanup_invert), (GST_START_TEST), (invert_suite), (main):
Add unit test suite for the audioinvert element.
Original commit message from CVS:
Patch by: Sebastian Dröge <slomo circular-chaos org>
* gst/audiofx/audiopanorama.c: (gst_audio_panorama_class_init),
(gst_audio_panorama_set_process_function):
Use a function array for process methods, add more docs and define the
startindex of enums.
Original commit message from CVS:
Patch by: Sebastian Dröge <slomo ubuntu com>
* docs/plugins/Makefile.am:
* gst/audiofx/audiopanorama.c:
Some small docs fixes (#394851).
Original commit message from CVS:
Patch by: Sebastian Dröge <mail at slomosnail de >
* gst/audiofx/audiopanorama.c: (gst_audio_panorama_init),
(gst_audio_panorama_set_caps), (gst_audio_panorama_transform):
* gst/audiofx/audiopanorama.h:
Fix audiopanorame with float samples. Fixes#383726.
Original commit message from CVS:
* gst/audiofxgood/audiopanorama.c: (gst_audio_panorama_class_init),
(gst_audio_panorama_set_property),
(gst_audio_panorama_get_property),
(gst_audio_panorama_transform_m2s_int),
(gst_audio_panorama_transform_s2s_int),
(gst_audio_panorama_transform_m2s_float),
(gst_audio_panorama_transform_s2s_float):
* gst/audiofxgood/audiopanorama.h:
* tests/check/elements/audiopanorama.c: (GST_START_TEST):
Make also the pan-property float (saves scaling and yields better
resolution)
Original commit message from CVS:
* gst/audiofxgood/audiopanorama.c: (gst_audio_panorama_set_caps),
(gst_audio_panorama_transform_m2s_float),
(gst_audio_panorama_transform_s2s_float):
ChangeLog surgery to add cymax's real name
Original commit message from CVS:
* gst/audiofxgood/audiopanorama.c:
(gst_audio_panorama_transform_m2s):
Fix docs & debug category. Add Fixme for volume pan levels.
Original commit message from CVS:
New mimetypes gone into effect today - this commit changes all old mimetypes over to the new mimetypes spec as described in the previous commit's document. Note: some plugins will break, some pipelines will break, expect HEAD to be broken or at least not 100% working for a few days, but don't forget to report bugs
Original commit message from CVS:
compatibility fix for new GST_DEBUG stuff.
Includes fixes for missing includes for config.h and unistd.h
I only ensured for plugins I can build that they work, so if some of them are still broken, you gotta fix them yourselves unfortunately.
Original commit message from CVS:
another batch of connect->link fixes
please let me know about issues
and please refrain of making them yourself, so that I don't spend double
the time resolving conflicts
