This allows to add pad templates and set metadata in class_init instead of
base_init. base_init is a concept that is not supported by almost all
languages and copying the templates/metadata for subclasses is the more
intuitive way of doing things.
Subclasses can override pad templates of parent classes by adding a new
template with the same now.
Also gst_element_class_add_pad_template() now takes ownership of the
pad template, which was assumed by all code before anyway.
Fixes bug #491501.
Based on patch by: Daniel Macks <dmacks@netspace.org>
Earlier versions of OSX don't support proper multiarch and
trying to use /usr/bin/arch -foo with those versions would
just break things.
https://bugzilla.gnome.org/show_bug.cgi?id=615357
1) We need to lock and get a strong ref to the parent, if still there.
2) If it has gone away, we need to handle that gracefully.
This is necessary in order to safely modify a running pipeline. Has been
observed when a streaming thread is doing a buffer_alloc() while an
application thread sends an event on a pad further downstream, and from
within a pad probe (holding STREAM_LOCK) carries out the pipeline plumbing
while the streaming thread has its buffer_alloc() in progress.
On OSX, GStreamer might be built as a 'fat/universal' binary containing
both 32-bit and 64-bit code. We must take care that gst-plugin-scanner
is executed with the same architecture as the GStreamer core, otherwise
bad things may happen and core/scanner will not be able to communicate
properly.
Should fix issues with (32-bit) firefox using a 32-bit GStreamer core
which then spawns a 'universal' gst-plugin-scanner binary which gets
run in 64-bit mode, causing 100% cpu usage / busy loops or just hanging
firefox until killed.
https://bugzilla.gnome.org/show_bug.cgi?id=615357
As GST_SCHEDULING reports when buffers pass through pads due to
gst_pad_push calls, they are a good way of tracking the progress of
buffers through pipelines. As such, adding output of the buffer pointers
to these messages allows tracking of specific buffers, easing debugging.
Remove the android/ top dir
Fixe the Makefile.am to be androgenized
To build gstreamer for android we are now using androgenizer which generates the needed Android.mk files.
Androgenizer can be found here: http://git.collabora.co.uk/?p=user/derek/androgenizer.git
Even if we currently do not have a duration yet, assume seekable if
it looks like we'll likely be able to determine it later on
(which coincides with needed information to perform seeking).
Fixes#641047.
Rather than a fixed default frame count, estimate frame count to aim for
an interval duration depending on fps if available, otherwise use old
fixed default.
Also add a format flag to signal baseparse that subclass/format can provide
(parsed) timestamp rather than an estimated one. In particular, such "strong"
timestamp then allows to e.g. determine duration.
Don't unref the event if it hasn't been handled, because the caller
assumes it is still valid and might reuse it.
I ran into this problem when transcoding an AVI (with mp3 inside)
to gpp.
https://bugzilla.gnome.org/show_bug.cgi?id=639555
That is, as such formats allow subclass to extract position from frame,
it is possible to extract duration (if not otherwise provided)
from (near) last frame, and a seek can fairly accurately target the required
position.
Fixes#631389.
Arrange for upstream as well as downstream flushing when seeking.
Also determine upstream size as well as seekability. Adjust some comments
to reality and employ debug statement in proper order.
This reverts commit b5a3d60363.
Reverting this for now, since no one really seems to remember why this
property exists or what it could possibly be good for. It seems to have
been in the original mp3parse since the beginning of time and was back-
ported from there.
Seekability, like duration, etc is unlikely to change (frequently), and
the default assumption covers most cases, so let subclass set when needed.
At the same time, allow subclass to indicate if it has seek-metadata (table)
available, and possibly have it provide an average bitrate.
This allows the child class to chain its event handler with
GstBaseParse, so that subclasses don't have to duplicate all the default
event handling logic.
https://bugzilla.gnome.org/show_bug.cgi?id=622276
We wait to parse a minimum number of frames (10, arbitrarily) before
emiting bitrate tags so that our early estimates are not wildly
inaccurate for streams that start with a silence. If the stream ends
before that, we just emit the tags anyway.
While it _would_ be nicer to be specify the threshold to start pushing
the tags in terms of duration, this would introduce more complexity than
this merits.
https://bugzilla.gnome.org/show_bug.cgi?id=614991
This makes baseparse keep a running average of the stream bitrate, as
well as the minimum and maximum bitrates. Subclasses can override a
vfunc to make sure that per-frame overhead from the container is not
accounted for in the bitrate calculation.
We take care not to override the bitrate, minimum-bitrate, and
maximum-bitrate tags if they have been posted upstream. We also
rate-limit the emission of bitrate so that it is only triggered by a
change of >10 kbps.
Perform sanity check on type of seek, and only perform one that is
appropriately supported. Adjust downstream newsegment event
to first buffer timestamp that is sent downstream.
In particular, consider DISCONT == !sync, and allow subclass to query
sync state, as it may want to perform additional checks depending
on whether sync was achieved earlier on.
Also arrange for subclass to query whether leftover data is being drained.
In particular, (optionally) provide baseparse with a notion of frames per second
(and therefore also frame duration) and have it track frame and byte counts.
This way, subclass can provide baseparse with fps and have it provide default
buffer time metadata and conversions, though subclass can still install
callbacks to handle such itself.
After all, stream is as-is, and there is little molding to downstream's
taste that can be done. If subclass can and wants to do so, it can
still override as such.
Also handle the case gracefully where the subclass decides to drop
the first buffers and has no caps set yet. It's still required to
have valid caps set when the first buffer should be passed downstream.
Sending the flush-start event forward before taking the stream lock actually
works, in contrast to deadlocking in downstream preroll_wait (hunk 1).
After that we get the chain function being stuck in a busy loop. This is fixed
by updating the minimum frame size inside the synchronization loop because the
subclass asks for more data in this way (hunk 2).
Finally, this leads to a very probable crash because the subclass can find a
valid frame with a size greater than the currently available data in the
adapter. This makes the subsequent gst_adapter_take_buffer call return NULL,
which is not expected (hunk 3).
Baseparse internaly breaks the semantics of a _chain function by calling it with
buffer==NULL. The reson I belived it was okay to remove it was that there is
also an unchecked access to buffer later in _chain. Actually that code is wrong,
as it most probably wants to set discont on the outgoing buffer.
This allows to only create the socketpair when it is really required instead
of always creating it and immediately destroying it again for child buses.
https://bugzilla.gnome.org/show_bug.cgi?id=647005
This is used by GstBin to create a child bus without
a socketpair because child buses will always work
synchronous. Otherwise too many sockets could be
created and the limit of file descriptors for the
process could be reached.
Fixes bug #646624.
if set->control_pending is set to 0 but we didn't not succed reading
the control socket, future calls to gst_poll_wait() will be awaiken
by the control socket which will not be released properly because
set->control_pending is already 0, causing an infinite loop.
This caused "re-declaration" problems.
./clutter-gst-video-sink.c: In function ‘clutter_gst_video_sink_init_interfaces’:
./clutter-gst-video-sink.c:231:1: warning: declaration of ‘ClutterGstVideoSink’ shadows a global declaration [-Wshadow]
./clutter-gst-video-sink.h:64:44: warning: shadowed declaration is here [-Wshadow]
https://bugzilla.gnome.org/show_bug.cgi?id=646531
Some applications are requesting the same pad name multiple times
and the behaviour is undefined and different from element to element
but we don't want to break applications that work just fine.
In 0.11 this check should be an assertion again, although elements
have to do manual checking if the pad already exists again because
it can't be done in a threadsafe way here.
Allow for automatic merging of memory block in the _map function and automatic
freeing of the temporary memory.
Remove some unneeded functions.
Add possibility to force writable spanned memory.
basesrc's default event handler returns TRUE regardless of whether the
event is handled or not. This fixes the handler to conform with the
expected behaviour (which is to only return TRUE when the event has
actually benn handled). gst_bin_do_latency_func() depended on this
(incorrect) behaviour, and is now modified as well.
(Remaining 1-liner change in gstbasesrc.c is to keep gst-indent happy)
Just like gst_caps_intersect, but adds a new parameter 'mode'
that allows selecting the intersection algorithm to use.
Currently we have GST_CAPS_INTERSECT_MODE_ZIG_ZAG (default) and
GST_CAPS_INTERSECT_MODE_FIRST.
API: gst_caps_intersect_full
API: GstCapsIntersectMode
API: GST_CAPS_INTERSECT_MODE_ZIG_ZAG
API: GST_CAPS_INTERSECT_MODE_FIRST
https://bugzilla.gnome.org/show_bug.cgi?id=617045
Adding a buffer to the end of a GstBufferList is supposed to be a fast
operation, but it was not since the iterator does not advance its
nextpointer when adding buffers and GList does not have a tail pointer.
Using a GQueue to store the buffers makes it easier to add buffers to
the end of the list and this operation will now be much more efficient.
Adding an entire GList of buffers using
gst_buffer_list_iterator_add_list() will however have to iterate over
the list being added to be able to update the tail pointer in the
GQueue.
GST_DISABLE_DEPRECATED should only affect visibility of declarations in headers,
not actually remove symbols. See GitDeveloperGuidelines and DeprecatingAPI
pages in wiki.
https://bugzilla.gnome.org/show_bug.cgi?id=402141
Add new functions to clarify how the caps are compared to the template caps of
the element factory. Improve the docs to point out the difference.
Deprecate: gst_element_factory_can_{src|sink}_caps
API: add gst_element_factory_can_{src|sink}_{any|all}_capps
https://bugzilla.gnome.org/show_bug.cgi?id=402141
Replace subbuffer and copy vmethods by a more generic transform function that
can then be parametrised by transform specific data. This should allow us to
implement make-writable and more future transform functions.
Check if structure has been created before appending it to the caps. Free the
caps in the case of an error to not conceal it be returning empty caps.
Fixes#642271
Keep a pointer to the bufferpool. Release the buffer to the pool when
finalizing. Make sure the pool sets itself as the pool member of buffers that it
sends out.
Move some methods around.
Make sure we check for config parsing errors.
Increment the outstanding buffers before calling acquire so that we can be sure
that set_active() doesn't free the pool from under us.
Add start/stop methods to allow for bulk allocation of buffers.
Free buffers only when all outstanding buffers returned.
Make things more threadsafe wrt flushing and starting/stopping by
keeping track of start and stop method calls.
Use a lock to protect concurrect execution of set_config and set_active.
Start freeing the buffers when flushing and all buffers are returned to the
pool.
Make a copy of the config to avoid crashing with concurrent access.
Keep track if the buffer is configured and block activation when not configured
yet.
Keep track of outstanding buffers and disallow configuration when not all
buffers are returned to the pool. We need to do this or else we might end up
with wrong buffers in the pool.
Add return value to set_active.
Small cleanups. Fix finalize.
Use a GstStructure to provide the pool with the right configuration. Also
provide some helper methods to configure such a structure.
don't pass the config in alloc_buffer, pool implementation will already have
parsed it during set_config.
Update defs
