Some hardware decoders, for example Hantro G1, have to be told the size
of the dec_ref_pic_marking() syntax element in bits. Record the size so
it can be passed on to the hardware.
The calculated size of short_term_ref_pic_set is not a part of
HEVC syntax but the value is used by some stateless decoders
(e.g., vaapi, dxva, vdpau and nvdec) for the purpose of skipping
parsing the syntax by the accelerator.
Add num_ref_idx_active_override_flag and sp_for_switch_flag to
member of GstH264SliceHdr. No reason to hiding them and
some decoder implementations (e.g., DXVA) rely on externally parsed header
data which can be provided by h264parser.
Add a separate epb_cache variable to the codecparser NalReader to
detect Emulation Prevention Bytes separately from the main bit cache.
This fixes problems where the existing logic can mistakenly detect
multiple EPB with a sequence like: 0x00 0x00 0x03 0x00 0x03. In that
case, the 5th byte should not be regarded as an EPB.
3-byte emulation bytes can confuse the current code that skips
bits at the end of an SEI. Use a simpler method that's also
quicker because it skips all remaining bits in one go instead
of 1 bit at a time.
The SPS parsing functions take a parse_vui_param flag
to skip VUI parsing, but there's no indication in the output
SPS struct that the VUI was skipped.
The only caller that ever passed FALSE seems to be the
important gst_h264_parser_parse_nal() function, meaning - so the
cached SPS were always silently invalid. That needs changing
anyway, meaning noone ever passes FALSE.
I don't see any use for saving a few microseconds in
order to silently produce garbage, and since this is still
unstable API, let's remove the parse_vui_param.
The spec calls for pic_timing SEI to be absent unless
there's either a CpbDpbDelaysPresentFlag or
pic_struct_present_flag in the SPS VUI data. If
both those flags are missing, warn.
If parsing an SEI errors out, it might not consume
all bits, leaving extra unparsed data in the reader
that the outer loop then tries to parse as a new
appended SEI.
Skip all the bits if any are left over to avoid
'finding' extra garbage SEI in the parsing.
When parsing SEI that require an SPS, return
GST_H264_PARSER_BROKEN_LINK instead of a generic
parsing error to let callers distinguish
bitstream errors from (expected) missing packets
when resuming decode.
"High Throughput", "Multiview", "Scalable", "3D", "Screen Content Coding",
and "Scalable format range extensions" profiles can be supported
via h265parser APIs now.
The same timing_info will be present at vps or vui.
When the timeing_info is present in the VPS, vui_timing_info
, when present, shall be equal to vps_timing_info, and when
not present, is inferred to be equal to vps_timing_info.
Expose SEI data in the H.264 bitstream parser API and
extract closed captions and other things that are not
specified in the H.264 spec itself in the videoparser.
Based on patch by: Mathieu Duponchelle <mathieu@centricular.com>
https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/issues/940
* Add FIXME for future correction of HRDParames parsing.
Spec. defines that the number of HRDParames could be up to
"vps_num_layer_sets_minus1 + 1" (i.e., 1024).
* Add parsing vps_base_layer_{internal,available}_flag.
* Fix possible invalid vps_extension parsing.
Fixes#798
For each lib we build export its own API in headers when we're
building it, otherwise import the API from the headers.
This fixes linker warnings on Windows when building with MSVC.
The problem was that we had defined all GST_*_API decorators
unconditionally to GST_EXPORT. This was intentional and only
supposed to be temporary, but caused linker warnings because
we tell the linker that we want to export all symbols even
those from externall DLLs, and when the linker notices that
they were in external DLLS and not present locally it warns.
What we need to do when building each library is: export
the library's own symbols and import all other symbols. To
this end we define e.g. BUILDING_GST_FOO and then we define
the GST_FOO_API decorator either to export or to import
symbols depending on whether BUILDING_GST_FOO is set or not.
That way external users of each library API automatically
get the import.
While we're at it, add new GST_API_EXPORT in config.h and use
that for GST_*_API decorators instead of GST_EXPORT.
The right export define depends on the toolchain and whether
we're using -fvisibility=hidden or not, so it's better to set it
to the right thing directly than hard-coding a compiler whitelist
in the public header.
We put the export define into config.h instead of passing it via the
command line to the compiler because it might contain spaces and brackets
and in the autotools scenario we'd have to pass that through multiple
layers of plumbing and Makefile/shell escaping and we're just not going
to be *that* lucky.
The export define is only used if we're compiling our lib, not by external
users of the lib headers, so it's not a problem to put it into config.h
Also, this means all .c files of libs need to include config.h
to get the export marker defined, so fix up a few that didn't
include config.h.
This commit depends on a common submodule commit that makes gst-glib-gen.mak
add an #include "config.h" to generated enum/marshal .c files for the
autotools build.
https://bugzilla.gnome.org/show_bug.cgi?id=797185
It is completely legal to have packets with zero sizes.
Zero-sized packet indicates header with only Start Code.
One eg: is user data packet. The patch allows having
GstMpegVideoPacket with zero sizes.
https://bugzilla.gnome.org/show_bug.cgi?id=796477
We need different export decorators for the different libs.
For now no actual change though, just rename before the release,
and add prelude headers to define the new decorator to GST_EXPORT.
Those fields have been introduced in version 2 and later to define new
profiles like the format range extensions profiles (A.3.5).
NOTE: This patch breaks the parser ABI, rebuild needed.
https://bugzilla.gnome.org/show_bug.cgi?id=793876
We used to have the same enum to represent H265 profiles and idc values.
Those are no longer the same with extension profiles defined from
version 2 of the spec.
Split those enums so the semantic of each is clearer and we'll be able
to add extension profiles to GstH265Profile.
Also add gst_h265_profile_tier_level_get_profile() to retrieve the
GstH265Profile from the GstH265ProfileTierLevel. It will be used to
implement the detection of extension profiles.
https://bugzilla.gnome.org/show_bug.cgi?id=793876
There is nothing in the spec that state that framerate is not valid in
that case. This aligns GStreamer with FFMPEG behaviour for similar
streams.
https://bugzilla.gnome.org/show_bug.cgi?id=793284
According to the vp8 spec, the first partition (size can be derived from
the frame header) should have all compressed header information and we
implemented gst codecparser based on that. But it doesn't seem to be the
case with some of the streams (#792773) and libvpx
works fine because it uses the whole frame size (not the first partition
size) to initialize the bool decoder.
https://bugzilla.gnome.org/show_bug.cgi?id=792773
Libraries in -bad are not covered by our API/ABI stability
guarantees, and to the best of our knowledge everyone using
this API has moved to the replacement APIs ages ago.
'extern inline' was added in 2fb76c89 for MSVC (it was just
'inline' before), but all of this doesn't really make sense,
the functions are not going to be inlined anyway, and what
'extern inline' means exactly also appears to depend on the
Cxx standard targetted. Let's just remove the 'extern inline'
entirely. At least gcc6 still emits the exact same code as
before anyway. Fixes compilation/linking with gcc 4.8 as
used on L4T on the TK1.
https://github.com/mesonbuild/meson
With contributions from:
Tim-Philipp Müller <tim@centricular.com>
Matej Knopp <matej.knopp@gmail.com>
Jussi Pakkanen <jpakkane@gmail.com> (original port)
Highlights of the features provided are:
* Faster builds on Linux (~40-50% faster)
* The ability to build with MSVC on Windows
* Generate Visual Studio project files
* Generate XCode project files
* Much faster builds on Windows (on-par with Linux)
* Seriously fast configure and building on embedded
... and many more. For more details see:
http://blog.nirbheek.in/2016/05/gstreamer-and-meson-new-hope.htmlhttp://blog.nirbheek.in/2016/07/building-and-developing-gstreamer-using.html
Building with Meson should work on both Linux and Windows, but may
need a few more tweaks on other operating systems.
The subsampling_x, subsampling_y, bit_depth, color_space and color_range
fileds are moved from GstVp9FrameHdr to the global GstVp9Parser structure.
These fields are only present in keyframe or intra-only frame, no need to
duplicate them for inter-frames. This is an ABI change.
https://bugzilla.gnome.org/show_bug.cgi?id=764370
This is a regression from since mpegvideoparser was switched to
use the codecparsing library.
The problem is that the high bit of the profile_and_level is used
to specify non-hierarchical profiles and levels. Unfortunately we
were discarding that information.
Expose that escape bit, and use it in the element
https://bugzilla.gnome.org/show_bug.cgi?id=763220
H.265 7.4.7.1 says:
> When slice_deblocking_filter_disabled_flag is not present, it is
> inferred to be equal to pps_deblocking_filter_disabled_flag.
https://bugzilla.gnome.org/show_bug.cgi?id=762351
Initialize to 0 these parse structures before filling them: GstH264SEIMessage,
GstH264NalUnit, GstH264PPS, GstH264SPS and GstH264SliceHdr.
When calling the functions which fill those structures, they may fail, leaving
unitialized those structures. This situation may lead to future problems, such
as a segmentation fault when freeing, for example.
This patch initializes to zero these structures, before filling them.
https://bugzilla.gnome.org/show_bug.cgi?id=755161
Initialize to 0 these parse structures before filling them: GstH265SEIMessage,
GstH265NalUnit, GstH265VPS, GstH265PPS, GstH265SPS and GstH265SliceHdr.
When calling the functions which fill those structures, they may fail, leaving
unitialized those structures. This situation may lead to future problems, such
as a segmentation fault when freeing, for example.
This patch initializes to zero these structures, before filling them.
https://bugzilla.gnome.org/show_bug.cgi?id=755161
If short_term_ref_pic_set_sps_flag is FALSE, the ShortTermRefPicSet
structure is supposed to derive from slice header. Which means,
CurrRpsIdx is equal to num_short_term_ref_pic_sets. But the number
of refpicsets communicated via sps header is only num_short_term_ref_pic_sets - 1.
And we are using slice_header structure to reference the last entry, which is
ShortTermRefPicSet[num_short_term_ref_pic_sets].
https://bugzilla.gnome.org/show_bug.cgi?id=754834
Section 6.5.1: Coding tree block raster and tile scanning conversion process
Follow the equations 6-3 and 6-4
This will provide correct offset_max in slice_header for parsing
num_entry_point_offsets.
https://bugzilla.gnome.org/show_bug.cgi?id=754024
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
As per 7-42 and 7-43 the ScalingFactor's scanIdx is 0,
which is "up-right-diagonal" scan. Add APIs for converting
up-right-diagonal to raster and vise versa.
https://bugzilla.gnome.org/show_bug.cgi?id=754024
Being more strict on specification, According to 7.4.7.3,
delta_chroma_log2_weight_denom should be in the range of
[(0 - luma_log2_weight_denom), (7 - luma_log2_weight_denom)]
https://bugzilla.gnome.org/show_bug.cgi?id=754024
The SPS struct might be filled out by a call to
gst_h264_parser_parse_subset_sps, which fills out
dynamically allocated data and requires a call
to gst_h264_sps_clear() to free it. Also make sure
to clear out any allocated SPS data when returning
an error.
https://bugzilla.gnome.org/show_bug.cgi?id=753306
ChromaLog2WeightDenom = luma_log2_weight_denom + delta_chroma_log2_weight_denom
The value of ChromaLog2WeightDenom should be in the range of 0 to 7 and
the value luma_log2_weight_denom should be also in the range of 0 to 7.
Which means , delta_chroma_log2_weight_denom can have values in the range
between -7 and 7.
https://bugzilla.gnome.org/show_bug.cgi?id=753552
