A seek in multi-sink pipeline typically leads to several seek events in a row,
which could lead to sending several newsegments in a row without intermediate
flushing. These would then accumulate, distort rendering times and as such
lead to 'hanging'.
Reset the segment info after a flush. We use the segment for handling QoS and if
we don't reset the segment, QoS is basically disabled after a flushing seek.
Use the acquired field of the ringbuffer in get_time to know when we are in an
invalid state. We don't clear the rate flag when releasing the ringbuffer so
this values is not usable.
Avoids some error messages being posted because the pulseaudio connection is
down.
When we can't decode directly into the output buffer, make our temp buffers
only as big as needed instead of allocating for the worst case scenario (well,
we still alloc more than strictly needed for some cases, but significantly
less than before).
Generally decisions on the volume of the stream should be done inside of
PA, not inside of Gst. Only PA knows how volumes translate between
devices and s on.
This patch makes sure that all volumes set via the volume property are
only applied *once* to the underlying stream. After applying them the
client side will not store them anymore. This should make sure that
really only user-triggered volume changes are forwarded to server, but
the client never tries to save/restore the volume internally.
Fixes bug #595231.
pthread does not guarantee that there are no spurious condition variable
wakeups, neither does pa_threaded_mainloop_xxx() which is a wrapper
around it. So we need to loop around the _wait() function to make sure
we get the right wakeup.
Also, unify the order of the wait loops across the file.
If we let the daemon decide freely by passing -1, we end up always getting 20ms.
We want to set this value because in some cases we want to select a higher
latency-time in order to save power.
Fixes#597601
The very first buffer should always have the DISCONT flag set, no
need to warn about that. Only warn if we get a DISCONT buffer in
non-packetised mode and we already have some data.
In case that the pulse daemon runs the source device at a relatively low fixed
fragment size compared to the requested latency-time, configure the ring buffer
segsize to the largest integer multiple of the fragment size that is still
smaller than or equal to the requested latency-time.
Fixes bug #597463.
Don't store the same values in the GstDvDemux. This
fixes a bug where dvdemux would detect a stream as PAL
instead of NTSC, and silently parse it wrong.
There are 5 or 6 AAUX source control packs in a frame, and any
of them could have REC_ST cleared, indicating a recording start
point. libdv only checks the first.
Remove the code to deal with a ringbuffer reset as this code is now in the base
class.
Bump the -base requirement as we need the new baseaudiosink code to function
properly.
This is a live source, therefore:
* Use GST_FORMAT_TIME as the default format
* set_timestamp to True
* properly implement query latency.
This allows expected live usage like : playbin2 uri=dv://
Set the default slave method to the much better skew algorithm. This is the
default in the new base class but we override this here as well for the
upcomming release.
Otherwise that code will just be expanded to nothing when compiled
-DG_DISABLE_ASSERT (PS: why is mainloop_start() called in the init
function and not when changing state to READY?)
For some reason flac doesn't call our metadata callback when we operate
in push mode with unframed input, but that's where we set up the
newsegment event (since that's where we'd get the duration from the
stream info header), so we didn't send a newsegment event at all in this
case. Hack around this by storing a generic newsegment event for now
which will be used if we don't replace it with a better one that
includes the duration.
gst_adapter_peek() will merge buffers as needed, which we can avoid
here since we're doing a memcpy anyway and then flush the copied
data from the adapter right away.
Keep track of the paused state of the source and leave the read function when
paused.
don't wait for a latency update when the delay is not yet known but simply
return 0 instead of blocking.
Keep track of the corked state of the stream.
Fix the state changes.
When seeking in a local flac file (ie. operating pull-based), the decoder
would often just error out after the loop function sees a DECODER_ABORTED
status. This, however, is the read callback's way of telling our loop
function that pull_range failed and streaming should stop, in this case
because of the flush-start event that the seek handler pushed upstream
from the seeking thread. Handle this slightly better by storing the last
flow return from pull_range, so the loop function can evaluate it properly
when it encounters a DECODER_ABORTED and take the right action.
Fixes#578612.
Remove some disabled code in encoder. Try #if 0'ed code and add comments about
why it is disabled. Move idct-method enum to jpeg.c and use in both encoder and
decoder. Add idct-method property to encoder.
We can't wait for the ENTER/LEAVE messages to be be posted because the base
class sometimes calls the start method with the object lock, which would block
the message posting.
Instead, just assume that the message will be posted soon and continue. We'll
have to fix this in the base class.
Previously seekability way always assumed until the first seek actually
failed. Now we assume that all servers are not seekable unless they provide
a Content-Length header. If a seek fails after that we continue to
assume no seekability. Fixes bug #585576.
Emit stream-status messages for the pulse thread.
Don't use our own GCond for signaling but simply use the pulse mainloop
mechanisms for synchronisation.
See #587695
Upper volume limmit was 1000. That appear unneceasrily high. It would also cause
sever distortion if accidentialy used. Now its 10 (~ +15db) which is also in
sync with volume and playbin2.
Since we map the ringbuffer to the pulseaudio internal ringbuffer, flush the
pulseaudio buffer when we are asked to clear the ringbuffer.
This avoids some leftover audio after a seek.
Query the audio format, esp. dvdemux->num_channels, before we use that
variable to allocate the initial buffer. That way we don't accidentally
push a zero-sized buffer as first audio buffer.
Hack around thread-safety issues in GObject and our racy _get_type()
functions (we could easily fix the _get_type() functions, but we still
need to hack around the GObject class races until we require a newer
GLib version, I think).
Some have been replaced by newer ones, others are demoing elements that
don't exist any longer (not in -good anyway), and others have not been
touched in many years and it seem pointless to keep them around.
Removing these files makes sure we don't have any code in our repository
that uses Gtk+ symbols which are to be removed for GNOME3, and as such
will make some script that greps for this kind of stuff give us a clean
bill of code health. Fixes#585757.
A malformed (or simply huge) PNG file can lead to integer overflow in
calculating the size of the output buffer, leading to crashes or buffer
overflows later. Fixes SA35205 security advisory.
Let's be paranoid and make sure we never pass a number that takes up
more than 36 bits to _set_total_samples_estimate(), since libFLAC
expects all the other bits to be zero, and if this is not the case
neighbouring fields in the global stream info header may get messed
up inadvertently, so that flac -d refuses to decode the stream.
See #584455.
When "Content-Type" header is "audio/L16", we need to set the caps on the
outgoing buffers so that downstream elements can have means to detect the
stream type and handle it appropriately. Tested with HTTP stream provided
by pulse-audio's http module (git master).
It was previously sending the bogus buffer which was returned from
the bufferalloc (required for reverse negotiation apparently) instead
of the pending buffer.
This allows to set the Referer header among other things by
adding a "extra-headers" property that takes a GstStructure
with field=string pairs.
Fixes bug #581806.
Store the offset and caps when allocating a buffer during seeking, and then
allocate a new buffer with buffer_alloc before we push it out. This ensures
that in all respects the first buffer decoded during seeking behaves like
all other buffers, including allowing downstream re-negotiation.
The libjpeg api says that we need to set the colorspace before we call
_set_defaults(). Indeed, if we don't do that we end up with some very freaky
non-standard quant table and huffman table indexes.
Don't pass a 0 divisor to gst_util_uint64_scale(), or it will complain
in the single image case where fps=0/1 (are we supposed to differentiate
between no fps=still image and fps=0/1=variable rate here btw?)
First we ignore request to fill the ringbuffer which are less then a segment.
The small request where causing stutter.
Then we disable flushing the stream when running against pa 0.9.12 as this
triggers an assertiong in the sound server and terminates it. It does not happen
with 0.9.10 and 0.9.14.
We can use prebuf = 0 to instruct pulse to not pause the stream on underflows.
This way we can remove the underflow callback. We however have to manually
uncork the stream now when we have no available space in the buffer or when we
are writing too far away from the current read_index.
when we switch streams, the clock will reset to 0. Make sure that the provided
clock doesn't get stuck when this happens by keeping an initial offset. We also
need to make sure that we subtract this offset in samples when writing to the
ringbuffer.
If the caps changes, the sink is reset without transitioning through
a PAUSED->PLAYING state change, resulting in a corked stream. This avoids
the problem by checking that the stream is uncorked when writing samples
to it.
When trying to write out a segment, wait until there is enough free space
for the entire segment. This helps to reduce ripple in the clock reporting,
where the app might query the playback position while only half a segment
has been written (and is therefore reported by _delay(), even though
the ring buffer has not yet been advanced)
In the event handler, gst_flac_dec_sink_event(), two functions are called on
the FLAC stream without checking if it has been initialized:
FLAC__stream_decoder_flush()
FLAC__stream_decoder_process_until_end_of_stream()
Both these FLAC__*() functions modify the internal state of the FLAC stream.
Later, when the buffers start flowing, gst_flac_dec_chain() tries to initialize
the stream. the FLAC__stream_decoder_init_stream() call will fail because the
previous calls to FLAC__*() changed the stream state so it is no longer in the
initialized state.
The flacdec API calls the write callback when performing a seek. We cannot yet
push out a buffer at that time so we must keep it and push it out later.
Flush out the upstream part of the pipeline when doing a seek.
Fixes#574275.
g_atomic_int_(get|set) only work on ints and the flags are
an enum (which on most architectures is stored as an int).
Also the way the flags were accessed atomically would still
leave a possible race condition and we don't do it in any
other mixer track implementation, let alone at any other
place where an integer could be changed from different
threads. Removing the g_atomic_int_(get|set) will only
introduce a new race condition on architectures where
integers could be half-written while reading them
which shouldn't be the case for any modern architecture
and if we really care about this we need to use
g_atomic_int_(get|set) at many other places too.
Apart from that g_atomic_int_(set|get) will result in
aliasing warnings if their argument is explicitely
casted to an int *. Fixes bug #571153.
rather than PA thread.
pa_threaded_mainloop_lock() (a.o.) and by extension get_property should
not be done from a PA thread, but the latter may occur as a result of a
property change notification. Fixes#571204 (though current situation
not ideal, e.g. post message rather than signal).
newer pulseaudio.
Fixes: #567794
* Hook pulsesink's volume property up with the stream volume -- not the
sink volume in PA.
* Read the device description directly from the sink instead of going
via the mixer.
* Properly implement _reset() methods for both sink and source to avoid
deadlocks when shutting down a pipeline.
* Replace all simple pa_threaded_mainloop_wait() by proper loops to
guarantee that we wait for the right event in case multiple events are
fired. While this is not strictly necessary in many cases it
certainly is more correct and makes me sleep better at night.
* Replace CHECK_DEAD_GOTO macros with proper functions
* Extend the number of supported channels to 32 since that is the actual
limit in PA.
* Get rid of _dispose() methods since we don't need them.
* Increase the volume property upper limit of the sink to 1000.
* Reset function pointers after we disconnect a stream/context. Better
fix for bug 556986.
* Reset the state of the element properly if open/prepare fails
* Cork the PA stream when the pipeline is paused. This allows the PA
* daemon to
close audio device on pause and thus save a bit of power.
* Set PA stream properties based on GST tags such as GST_TAG_TITLE,
GST_TAG_ARTIST, and so on.
Signed-off-by: Lennart Poettering <lennart@poettering.net>
Link to properties. Correct titles for examples. Document a few trivial cases. Keep lists in section file and docs/plugins/Makefile.am alphabetically ordered. Fix warnings that gtk-doc points out.
If libsoup-gnome is found use this as it will give us
the GNOME proxy configuration. Otherwise use normal
libsoup.
The GNOME proxy configuration will only be used if
the proxy properties are not set on souphttpsrc
and if the http_proxy environment variable is not
set.
Fixes bug #552140.
Original commit message from CVS:
Patch by: Lennart Poettering <lennart at poettering dot net>
* ext/pulse/pulseprobe.c: (gst_pulseprobe_new),
(gst_pulseprobe_free):
Fix refcount loop, resulting in a thread leak. Fixes bug #567746.
Original commit message from CVS:
* ext/pulse/pulsesink.c:
* ext/pulse/pulsesink.h:
Use a mutex to protect the current stream pointer, and ignore
callbacks for stream objects that have been destroyed already.
Fixes problems with unprepare/prepare cycles caused by the input
caps changing, without reintroducing bug #556986.
Original commit message from CVS:
* ext/pulse/pulsesink.c: (gst_pulsesink_destroy_stream):
Don't wait for the pulse mainloop when destroying the stream.
Fixes a deadlock when the pulsedaemon goes away while pulsesink
is PLAYING. Fixes bug #556986.
Original commit message from CVS:
* ext/jpeg/gstsmokeenc.c: (gst_smokeenc_init),
(gst_smokeenc_getcaps), (gst_smokeenc_setcaps),
(gst_smokeenc_chain), (gst_smokeenc_change_state):
* ext/jpeg/gstsmokeenc.h:
Implement getcaps function.
Set caps on the pad and on all outgoing buffers.
Fixes#565441.
Original commit message from CVS:
* ext/pulse/pulsemixerctrl.c:
And remove temporary comment pointing to the bug ticket.
* gst/avi/gstavimux.c:
Move reoccuring logging to LOG and log instance too.
Original commit message from CVS:
* ext/dv/gstdvdemux.c: (gst_dvdemux_handle_src_event):
Restore previous behaviour of not passing QoS and navigation
events upstream, which presumably wasn't meant to be changed.
Original commit message from CVS:
* ext/dv/gstdvdemux.c: (gst_dvdemux_add_video_pad),
(gst_dvdemux_add_audio_pad), (gst_dvdemux_remove_pads),
(gst_dvdemux_demux_audio), (gst_dvdemux_demux_video),
(gst_dvdemux_chain), (gst_dvdemux_loop),
(gst_dvdemux_change_state):
Add srcpads only when needed and remove them again when going
back to READY. This prevents stalled pipelines if there's no
audio inside the DV stream, which happens for many MXF files.
Original commit message from CVS:
* ext/dv/gstdvdemux.c: (gst_dvdemux_handle_src_event):
Forward all events upstream unless it's something we really
don't handle. This fixes latency configuration of pipelines.
Original commit message from CVS:
* ext/dv/gstdv.c: (plugin_init):
* ext/dv/gstdvdec.c: (gst_dvdec_class_init):
* ext/dv/gstdvdemux.c: (gst_dvdemux_class_init):
Really call dv_init() exactly one time, not one time for
the demuxer and one time for the decoder.
Original commit message from CVS:
Patch by: Zeeshan Ali <zeeshanak at gnome dot org>
* ext/soup/gstsouphttpsrc.c: (gst_soup_http_src_build_message):
Add transferMode.dnla.org header to HTTP requests as this is
required by the DLNA specs and doesn't hurt in other situations.
Fixes bug #561802.
Original commit message from CVS:
* ext/libpng/gstpngenc.c:
Don't flush downstream after every buffer - that's not what
this libpng callback is for at all!
Original commit message from CVS:
* ext/flac/Makefile.am:
Include $(FLAC_CFLAGS) in CFLAGS to make sure to find the FLAC headers.
This fixes compilation if FLAC is installed in an uncommon location
that is not already handled by other CFLAGS. Fixes bug #558711.
Original commit message from CVS:
Patch by: Sjoerd Simons <sjoerd at luon dot net>
* ext/soup/gstsouphttpsrc.c: (gst_soup_http_src_class_init),
(gst_soup_http_src_set_property), (gst_soup_http_src_get_property):
Add support for souphttpsrc to act as a live source. This makes it
possible to get timestamped buffers in combination with the
"do-timestamp" property. Fixes bug #556019.
Original commit message from CVS:
* ext/flac/gstflacdec.c (gst_flac_dec_read_stream):
* ext/flac/gstflacenc.c (gst_flac_enc_write_callback):
Cast some size_t arguments to guint to avoid compiler
warnings on 64-bit systems.
Original commit message from CVS:
* ext/pulse/pulsesink.c: (gst_pulsesink_write):
* ext/pulse/pulsesrc.c: (gst_pulsesrc_read):
Return -1 instead of 0 in error cases. Fixes#554771.
Original commit message from CVS:
* ext/pulse/pulsesink.c:
Fix problems with pulsesink randomly erroring with code 'OK' after a
format change on the stream by waiting when disconnecting the stream.
Original commit message from CVS:
* ext/raw1394/gstdv1394src.c: (SEND_COMMAND):
* ext/raw1394/gsthdv1394src.c: (SEND_COMMAND):
Pretend to care about the result of write() which works around
compiler warnings.
Original commit message from CVS:
* ext/flac/gstflacenc.c: (gst_flac_enc_class_init):
Make sure the desired default values are actually set, not only
registered as defaults (actual problem is that the stereo-specific
values are only updated if channels==2, which is not the case yet
when the object is created, so the default values for the
mid-side-stereo and loose-mid-side-stereo settings are never
set in _update_quality()). Makes flacenc create smaller files by
default (for stereo input), and fixes#550791.
Original commit message from CVS:
* ext/speex/gstspeexdec.c: (speex_dec_chain_parse_data):
* ext/speex/gstspeexdec.h:
* ext/speex/gstspeexenc.c: (gst_speex_enc_encode):
* ext/speex/gstspeexenc.h:
Use integer encoding and decoding functions instead of converting
the integer input to float in the element. The libspeex integer
functions are doing this for us already or, if libspeex was compiled
in integer mode, they're doing everything using integer arithmetics.
Also saves some copying around.
Original commit message from CVS:
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_reset),
(gst_wavpack_enc_push_block), (gst_wavpack_enc_chain):
* ext/wavpack/gstwavpackenc.h:
Handle non-zero start timestamps and stream discontinuities
correctly. This only has an effect if we're muxing into
a container format as the raw WavPack stream must contain
continous sample numbers.
Original commit message from CVS:
* ext/speex/gstspeexenc.c: (gst_speex_enc_encode):
Correct the timestamp and granulepos calculation by one Speex
frame.
Original commit message from CVS:
* ext/speex/gstspeexdec.c: (speex_dec_chain_parse_data):
Correctly take the granulepos from upstream if possible and
correctly handle the granulepos in various calculations: the
granulepos is the sample number of the _last_ sample in a frame, not
the first.
* ext/speex/gstspeexenc.c: (gst_speex_enc_sinkevent),
(gst_speex_enc_encode), (gst_speex_enc_chain),
(gst_speex_enc_change_state):
* ext/speex/gstspeexenc.h:
Handle non-zero start timestamps in the encoder and detect/handle
stream discontinuities. Fixes bug #547075.
Original commit message from CVS:
Patch by: Craig Keogh <cskeogh at adam dot com dot au>
* ext/annodex/gstcmmlparser.c: (gst_cmml_parser_parse_chunk):
Fix compiler warnings caused by passing a string as format string
instead of "%s" and then the string. This is only exposed by -Wformat=2
as used by default on Ubuntu. Fixes bug #550015.
Original commit message from CVS:
* ext/pulse/pulsesrc.c: (gst_pulsesrc_class_init),
(gst_pulsesrc_create_stream), (gst_pulsesrc_negotiate),
(gst_pulsesrc_prepare):
* ext/pulse/pulseutil.c: (gst_pulse_gst_to_channel_map),
(gst_pulse_channel_map_to_gst):
* ext/pulse/pulseutil.h:
If downstream provides no channel layout and >2 channels should be
used use the default layout that pulseaudio chooses and also
add this layout to the caps. Fixes bug #547258.
Original commit message from CVS:
* ext/pulse/pulsesink.c: (gst_pulsesink_prepare):
* ext/pulse/pulsesrc.c: (gst_pulsesrc_prepare):
The bytes_per_sample and silence_sample fields of the GstRingBufferSpec
are already filled with the correct values by
gst_ring_buffer_parse_caps() so there's no need to set them again
with wrong values.
Original commit message from CVS:
* ext/pulse/pulsesink.c: (gst_pulsesink_class_init),
(gst_pulsesink_init), (gst_pulsesink_finalize),
(gst_pulsesink_set_volume), (gst_pulsesink_get_volume),
(gst_pulsesink_set_property), (gst_pulsesink_get_property),
(gst_pulsesink_prepare), (gst_pulsesink_change_state):
* ext/pulse/pulsesink.h:
Add "device-name" property to pulsesink too and currently commented
out and not working support for a "volume" property.
Original commit message from CVS:
Patch by: Laszlo Pandy <laszlok2 at gmail dot com>
* ext/pulse/pulsesrc.c: (gst_pulsesrc_class_init),
(gst_pulsesrc_get_property):
Add "device-name" property, which provides a human readable string
for the audio device, to make it more consisten with other audio
sources. Fixes bug #547519.
Original commit message from CVS:
* ext/pulse/pulsemixer.c: (gst_pulsemixer_change_state):
* ext/pulse/pulsemixerctrl.c: (gst_pulsemixer_ctrl_subscribe_cb),
(gst_pulsemixer_ctrl_open), (gst_pulsemixer_ctrl_new),
(gst_pulsemixer_ctrl_free), (gst_pulsemixer_ctrl_timeout_event):
* ext/pulse/pulsemixerctrl.h:
* ext/pulse/pulseprobe.c: (gst_pulseprobe_open),
(gst_pulseprobe_enumerate), (gst_pulseprobe_new),
(gst_pulseprobe_free), (gst_pulseprobe_needs_probe),
(gst_pulseprobe_probe_property), (gst_pulseprobe_get_values):
* ext/pulse/pulseprobe.h:
* ext/pulse/pulsesink.c: (gst_pulsesink_init):
* ext/pulse/pulsesrc.c: (gst_pulsesrc_init), (gst_pulsesrc_delay),
(gst_pulsesrc_change_state):
Improve debugging a bit by including the parent object in pulsemixerctrl
and pulseprobe objects and using GST_WARNING_OBJECT instead of
GST_WARNING.
Use the parent GObject subclass instead of a random struct as GObject
parameter for G_OBJECT_WARN_INVALID_PROPERTY_ID. This fixes a crash
when probing for another property than "device".
Original commit message from CVS:
Patch by: Laszlo Pandy <laszlok2 at gmail dot com>
* ext/pulse/pulsemixer.c: (gst_pulsemixer_set_property):
Fix property probing after the device property is set by calling
set_server when the server property changes. Fixes bug #547518.
Original commit message from CVS:
Patch by: Laszlo Pandy <laszlok2 at gmail dot com>
* ext/pulse/pulsemixer.c: (gst_pulsemixer_set_property):
Fix property probing after the device property is set by calling
set_server when the server property changes. Fixes bug #547518.
Original commit message from CVS:
* ext/flac/gstflacenc.c: (gst_flac_enc_check_discont):
Actually provide the variables required for the format string.
Original commit message from CVS:
* ext/flac/gstflacenc.c: (gst_flac_enc_write_callback),
(gst_flac_enc_check_discont), (gst_flac_enc_chain),
(gst_flac_enc_change_state):
* ext/flac/gstflacenc.h:
Handle non-zero start timestamps correctly, mark header packets as
IN_CAPS and print a warning and suggest using audiorate if stream
discontinuities are detected. When FLAC supports flushing the encoder
somehow this should be done for discontinuities instead.
Remove some unused variables from the instance struct.
Original commit message from CVS:
* ext/flac/gstflacenc.c: (gst_flac_enc_seek_callback):
If seeking failed return the appropiate return value to FLAC.
Otherwise it thinks seeking was successfull and tries to rewrite
parts of the headers which then get appended to the output.
Original commit message from CVS:
Patch by: Frederic Crozat <fcrozat@mandriva.org>
* ext/esd/gstesd.c: (plugin_init):
* ext/flac/gstflac.c: (plugin_init):
* ext/shout2/gstshout2.c: (plugin_init):
* ext/wavpack/gstwavpack.c: (plugin_init):
* sys/oss/gstossaudio.c: (plugin_init):
* sys/v4l2/gstv4l2.c: (plugin_init):
Make sure gettext returns translations in UTF-8 encoding rather
than in the current locale encoding (#546822).
Original commit message from CVS:
* ext/flac/gstflacdec.c:
Add FIXME for 0.11 to simply output everything with width=32 as given
by FLAC and let audioconvert handle the conversions instead of doing
them in flacdec.
Original commit message from CVS:
Based on a patch by: Jonathan Matthew <notverysmart at gmail dot com>
* ext/flac/Makefile.am:
* ext/flac/gstflac.c: (plugin_init):
* ext/flac/gstflactag.c: (gst_flac_tag_setup_interfaces),
(gst_flac_tag_base_init), (gst_flac_tag_class_init),
(gst_flac_tag_dispose), (gst_flac_tag_init),
(gst_flac_tag_sink_setcaps), (gst_flac_tag_chain),
(gst_flac_tag_change_state):
* ext/flac/gstflactag.h:
Port flactag to 0.10, add documentation for it and clean it up a bit.
Fixes bug #413841.
* docs/plugins/Makefile.am:
* docs/plugins/gst-plugins-good-plugins-docs.sgml:
* docs/plugins/gst-plugins-good-plugins-sections.txt:
* docs/plugins/gst-plugins-good-plugins.hierarchy:
* docs/plugins/gst-plugins-good-plugins.interfaces:
* docs/plugins/gst-plugins-good-plugins.prerequisites:
* docs/plugins/inspect/plugin-flac.xml:
* ext/flac/gstflacdec.c: (gst_flac_dec_base_init):
* ext/flac/gstflacdec.h:
* ext/flac/gstflacenc.c: (gst_flac_enc_base_init):
* ext/flac/gstflacenc.h:
Add flactag and flacenc to the documentation and mark
the private parts of the flacdec instance structure as private.
Also use gst_element_class_set_details_simple() in flacdec and
flacenc.
Original commit message from CVS:
* ext/flac/gstflacenc.c: (gst_flac_enc_query_peer_total_samples),
(gst_flac_enc_sink_setcaps), (gst_flac_enc_write_callback):
Set an estimate for the total number of samples that will be encoded
if possible to help decoders if the streaminfo can't be rewritten
later (like when muxing into Ogg containers).
Add a warning if we get header packets after data packets as those
will get lost when muxing into Ogg, i.e. rewriting the headers doesn't
work.
Original commit message from CVS:
* ext/flac/gstflacdec.c: (gst_flac_dec_metadata_callback),
(gst_flac_dec_write):
Support decoding of all depths between 4 and 32 bits and read the
depth from the streaminfo header if needed. Also support all sampling
rates between 1 and 655350 Hz.
* ext/flac/gstflacenc.c:
(gst_flac_enc_caps_append_structure_with_widths),
(gst_flac_enc_sink_getcaps), (gst_flac_enc_sink_setcaps),
(gst_flac_enc_chain):
* ext/flac/gstflacenc.h:
Support encoding in all bit depths supported by the streamable
subformat (i.e. 8, 12, 16, 20 and 24 bits) and all sampling rates
between 1 Hz and 655350 Hz.
Original commit message from CVS:
* ext/soup/gstsouphttpsrc.c:
* ext/soup/gstsouphttpsrc.h:
Fix seeking race condition in #540300
Patch By: Wouter Cloetens <wouter at mind be>
Original commit message from CVS:
* ext/flac/gstflacdec.c: (gst_flac_dec_setup_seekable_decoder),
(gst_flac_dec_setup_stream_decoder),
(gst_flac_dec_update_metadata):
Always post the audio-codec tag, not only if other tags are present.
Original commit message from CVS:
* ext/soup/gstsouphttpsrc.c:
Don't throw an error when soup completes a msg with status
'cancelled', as that indicates we cancelled a request while
shutting down or seeking, and it's not an error.
Fixes: #540300 again.
Original commit message from CVS:
* ext/Makefile.am:
Finish hooking up pulseaudio plugin to the build.
* ext/pulse/pulsemixerctrl.c:
Fix compilation error.
Original commit message from CVS:
* configure.ac::
* ext/taglib/Makefile.am::
Only use -Wno-attributes (which is there to work around a
bug in the taglib 1.5 headers) if the c++ compiler actually
supports it (#543255).
