Original commit message from CVS:
* libs/gst/controller/gstcontroller.c:
(gst_controlled_property_set_interpolation_mode):
Fix wrong getter for enums in controller.
Original commit message from CVS:
* libs/gst/check/gstcheck.c: (gst_check_init):
Intercept criticals and warnings in the Gst-Phonon log domain, so
ASSERT_CRITICAL() etc. can be used in gst-phonon's unit tests as
well.
Original commit message from CVS:
* gst/gstparamspecs.c: (_gst_param_fraction_validate):
Since this file doesn't include "gst.h" it will not go through the
macros that disable GST_LOG if debugging was disabled.
Original commit message from CVS:
* libs/gst/check/Makefile.am:
* libs/gst/check/gstcheck.h:
* pkgconfig/gstreamer-check-uninstalled.pc.in:
* pkgconfig/gstreamer-check.pc.in:
Ugly 'fix' for the controller unit test on the p5 bot: in
fail_unless_equals_float() check whether the values are 'almost
equal' by allowing a small absolute error, which should be good
enough for our use cases (normal numbers and values close to 0).
Proper fixage left to floating point arithmetic aficionados.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_reset_qos),
(gst_base_sink_render_object), (gst_base_sink_get_position):
Add two breaks thats where missing.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/check/gstcheck.h:
API: add fail_unless_equals_float() and assert_equals_float().
Add documentation for some of the macros.
* tests/check/libs/controller.c: (GST_START_TEST):
Use newly-added asserts.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_alloc_buffer_full), (gst_pad_push):
Show the caps change in the log to help spotting the case of not
exactly matching caps.
Original commit message from CVS:
* docs/plugins/Makefile.am:
* docs/plugins/gstreamer-plugins-docs.sgml:
* docs/plugins/gstreamer-plugins-sections.txt:
Pull fdsink into the docs too.
Original commit message from CVS:
* libs/gst/controller/gstinterpolation.c:
Actually use the new functions with min/max checks for the trigger and
none interpolation modes for get() and get_value_array() instead of
just the latter.
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c:
(gst_controlled_property_free):
Unset the minimum and maximum GValues when freeing the corresponding
GstControllerProperty struct.
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c:
(gst_controlled_property_new):
* libs/gst/controller/gstcontrollerprivate.h:
* libs/gst/controller/gstinterpolation.c:
(gst_controlled_property_find_control_point_node),
(interpolate_none_get), (interpolate_none_get_enum_value_array),
(interpolate_none_get_string_value_array),
(interpolate_trigger_get),
(interpolate_trigger_get_enum_value_array),
(interpolate_trigger_get_string_value_array):
Protect against values larger or smaller than the minimum or maximum
allowed value for the property when using values that can be compared.
Optimize trigger interpolator a bit by taking the last requested value
into account instead of always looping through the complete list.
Fix coding style a bit, everywhere else we use "return foo" instead
of "return (foo)".
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
Add unit test for the protection against too large or too small
values.
Original commit message from CVS:
* libs/gst/controller/gstinterpolation.c: (DEFINE_CUBIC_GET):
Use gst_util_guint64_to_gdouble for conversions.
* win32/common/libgstreamer.def:
Add new exported functions.
Original commit message from CVS:
* gst/gstbin.c: (find_message), (bin_replace_message), (is_eos),
(gst_bin_remove_func), (gst_bin_element_set_state),
(bin_handle_async_start), (bin_handle_async_done),
(gst_bin_handle_message_func):
Add helper function to find messages.
Generate the async-done messages together with the state change
messages.
Small cleanups in handling toplevel bins.
Original commit message from CVS:
* libs/gst/base/gstdataqueue.c:
* libs/gst/base/gstdataqueue.h:
* plugins/elements/gstmultiqueue.c: (gst_single_queue_push_one),
(gst_multi_queue_item_new), (gst_multi_queue_chain),
(gst_multi_queue_sink_event):
* tests/check/elements/multiqueue.c: (multiqueue_suite):
Fix multiqueue leaking buffers and events when downstream or the
queue are flushing. Make refcounting assumptions explicit and
document them (shouldn't break existing code that uses it other than
maybe leak miniobjects, but that already happens anyway). Add unit
test for the most common flushing case. Fixes#423700.
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c:
Clarify docs: The get_all, get_value_array(s) functions
don't modify the GObject properties.
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c:
(gst_controlled_property_set_interpolation_mode),
(gst_controlled_property_prepend_default),
(gst_controlled_property_new), (gst_controller_set_unlocked),
(gst_controller_set), (gst_controller_set_from_list),
(gst_controller_unset), (gst_controller_unset_all):
* libs/gst/controller/gstcontrollerprivate.h:
* libs/gst/controller/gstinterpolation.c:
Factor out the 'set' logic into gst_controller_set_unlocked for the
gst_controller_set and gst_controller_set_from_list functions.
To make life of the interpolators easier always add a control point
at timestamp zero with the default value.
In the linear interpolator make things more obvious by better variable
naming (slope).
Implement cubic interpolation mode (by using a natural cubic spline)
and map the quadratic interpolation mode to this too (as quadratic
doesn't make much sense, see discussion on the list).
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
Add unit test for the cubic interpolation mode and check everywhere
if the interpolation mode could be set as expected.
Original commit message from CVS:
* gst/gstparamspecs.c: (gst_param_spec_fraction_get_type):
Don't use GLib-2.10 functions, we still depend on
GLib-how-old-is-it-again-2.8.
Original commit message from CVS:
* gst/gstobject.c: (gst_object_class_init):
Fix signal signature.
* gst/gstsegment.c:
Add small clarification in the api docs.
* plugins/elements/gstfilesrc.c: (gst_file_src_set_location):
States are protected with object lock.
Original commit message from CVS:
* gst/gstbin.c: (bin_handle_async_done):
Make sure that the child bin stops after completing the async state
change so that the parent can continue the state change to PLAYING.
Fixes#441159.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_finalize),
(unref_data), (gst_collect_pads_remove_pad),
(gst_collect_pads_check_pads):
Use additional refcounting to avoid crashes when dynamically adding and
removing pads. Fixes#420206.
Original commit message from CVS:
* tools/gst-launch.c: (event_loop):
When buffering goes from a two digit to a single digit number, make sure
to remove the old second digit by writing a blank over it.
Original commit message from CVS:
* tests/check/gst/gstbin.c: (GST_START_TEST):
Allow refcount of 3 and 4 because some state thread might still be busy
with it.
Original commit message from CVS:
* plugins/elements/Makefile.am:
* plugins/elements/gstmultiqueue.h:
* plugins/elements/gstqueue.h:
These are not installed headers, no need for padding.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_get_state_func),
(gst_bin_continue_func):
Enable latency for next release.
Restore STATE_LOCK around recalc_state that was left out during the
rewrite and could result in racy behaviour when _get_state and
recalc_state are run concurrently. See #440463.
Original commit message from CVS:
* tests/check/gst/gstsystemclock.c: (store_callback),
(GST_START_TEST):
Improve test_async_order to also work when both timers are already
expired when we get scheduled to check it.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_init), (gst_bin_dispose),
(gst_bin_set_property), (gst_bin_get_property),
(gst_bin_remove_func), (gst_bin_handle_message_func):
* gst/gstbin.h:
'private' is a c++ keyword, let's not use that in header files,
otherwise c++ compilers will throw a tantrum.
Original commit message from CVS:
* plugins/elements/gstelements.c:
* plugins/elements/gstfilesink.c: (gst_file_sink_do_seek),
(gst_file_sink_get_current_offset):
* plugins/indexers/gstindexers.c: (plugin_init):
Use #ifdef for HAVE_XYZ for consistency.
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/filesink.c: (setup_filesink),
(cleanup_filesink), (GST_START_TEST), (filesink_suite):
Add some unit tests for filesink.
Original commit message from CVS:
Patch by: Mark Nauwelaerts <manauw at skynet be>
* plugins/elements/gstfilesink.c: (gst_file_sink_open_file),
(gst_file_sink_query), (gst_file_sink_do_seek),
(gst_file_sink_get_current_offset), (gst_file_sink_render):
* plugins/elements/gstfilesink.h:
Fix position reporting; rename data_written member to current_pos to
reflect its real meaning (fixes#412648).
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_init),
(gst_bin_dispose), (gst_bin_set_property), (gst_bin_get_property),
(gst_bin_remove_func), (gst_bin_handle_message_func):
* gst/gstbin.h:
Add a property for bins that handle the state change of their childs.
Fixes#435880
Original commit message from CVS:
* libs/gst/controller/gstinterpolation.c:
Use an array of the correct type when using _get_value_array with
linear interpolation.
Original commit message from CVS:
* libs/gst/controller/gstinterpolation.c:
(interpolate_trigger_get_enum_value_array),
(interpolate_trigger_get_string_value_array):
Add support for retrieving value arrays when using the trigger
interpolation mode.
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c:
(gst_controller_get_value_array):
* libs/gst/controller/gstcontroller.h:
Clarify the docs of gst_controller_get_value_array(): The array where
the values should be written to must be allocated as there seems to be
no way to get the size of a random GType. This doesn't change any
behaviour. Also fix some typos all over the place and remove an unused,
commented function that is not necessary as g_object_set() could be
used instead.
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
Add unit test for gst_controller_get_value_array().
