Fixes abort when the old specifiers are used. Fix up the conversion
specifier, it would get overwritten with 'c' below to the extension
format char, which then later is unhandled, leading to the abort.
Also fix up and enable unit test for this.
https://bugzilla.gnome.org/process_bug.cgi
These account for both possible type size mismatch AND -mms-bitfields
packing. Sizes are taken from an i686-w64-mingw32-built GStreamer,
gcc 4.8.0, mingw-w64 svn-r5685.
Fixes#697551
This is equal to any other caps features but results in unfixed caps. It
would be used by elements that only look at the buffer metadata or are
currently working in passthrough mode, and as such don't care about any
specific features.
These are meant to specify features in caps that are required
for a specific structure, for example a specific memory type
or meta.
Semantically they could be though of as an extension of the media
type name of the structures and are handled exactly like that.
pop() in collected callback.
There were three threads in the test cases that hanged: the test thread and two
threads that push buffers. Each thread push one buffer on one pad. There are
two pads in the collectpads so the second buffer will trigger the
collect-callback.
This is what happens when the hang occurs:
The first thread pushes a buffer and initializes a cookie to the value of a
counter in the collectpads object and waits on a cond for the counter to change
and for someone to consume the buffer (i.e. _pop() it).
The second thread pushes a buffer and calls the collected callback, which
signals the cond that the test thread is waiting for.
The test thread pops both buffers (without holding any lock). Each call to
_pop() increases the counter broadcasts the condition that the first thread is
now waiting for. It then joins both threads (hangs).
The first thread wakes up and returns, since its buffer has been consumed.
The second thread starts executing again. When the callback, called by the
second thread, has returned it initializes a cookie to the value of a counter,
which has already prematurely been increased by the test thread when it popped
the buffers, and wait's on a cond for the counter to change and for someone to
consume the buffer (i.e. _pop() it). Since the buffer has already been poped
and the counter has already been increased it will be stuck forever.
https://bugzilla.gnome.org/show_bug.cgi?id=685555
We previously forgot to initilize the amplitde property to the default and thus it was 0.0. Therefore a default lfo controlsource returned a series of 0.0 and the test was asserting on that.
Set operations on the bitmasks don't make much sense and result
in invalid caps when used as a channel-mask. They are now handled
exactly like integers.
This functionality was not used anywhere except for tests.
https://bugzilla.gnome.org/show_bug.cgi?id=691370
The _1_0 suffixed environment variables override the
non-suffixed ones, so if we're in an environment that
sets the _1_0 suffixed ones, such as jhbuild, we need
to set those to make sure ours actually always get
used.
Implement the same behaviour as gst_pad_push_event when pushing sticky events
fails, that is don't fail immediately but fail when data flow resumes and upstream
can aggregate properly.
This fixes segment seeks with decodebin and unlinked audio or video branches.
Fixes: https://bugzilla.gnome.org/show_bug.cgi?id=687899
Fixes negotiation taking a ridiculous amount of
time (multiple 10s of seconds on a core2) when
there are duplicate entries in lists.
Could have a negative performance impact on other
scenarios because we now have to iterate the
dest list to avoid duplicates, but we don't
have a lot of lists any more these days, and
they tend to be small anyway. The negatives
are hopefully countered by the positive effects
of reducing the list length early on in the
process. And in any case, it's the right thing
to do.
Based on patch by Andre Moreira Magalhaes.
https://bugzilla.gnome.org/show_bug.cgi?id=684981
Also add test to make sure that if a pad probe is removed while it's
callback is running, the cleanup_hook isn't called again if it
returns GST_PAD_PROBE_REMOVE
define GLIB_DISABLE_DEPRECATION_WARNINGS earlier so that it is defined before
the glib headers are loaded or else we trip over the GValueArray deprecations in
gst-inspect.c.
Our check would make sure that GLib segfaults when
someone tries to instantiate an abstract type, which
is an extremely useful thing to check for.
In newer GLibs this is fixed and we get an abort with
a g_error() now it seems, so let's just remove this
check entirely.
This is because we need to be able to signal different TOCs
to downstream elements such as muxers and the application,
and because we need to send both types as events (because
the sink should post the TOC messages for the app in the
end, just like tag messages are now posted by the sinks),
and hence need to make TOC events multi-sticky.
https://bugzilla.gnome.org/show_bug.cgi?id=678742
This specifies if a given taglist applies to the complete
medium or only this specific stream. By default a taglist
has a stream scope.
Fixes bug #677619.
Add an offset field that is used to track at what position the segment was
updated. This is used to set the running time to 0 when we do a flushing
seek that doesn't update the position.
See https://bugzilla.gnome.org/show_bug.cgi?id=680306
Stop querying the duration once an element return unknown and return unknown
as a final result. This avoid eventually cutting off a stream too early.
Add a tests to docuement the behavior.
Clear the initial floating ref in the init function for
busses and clocks. These objects can be set on multiple
elements, so there's no clear parent-child relationship
here. Ideally we'd just not make them derive from
GInitiallyUnowned at all, but since we want to keep
using GstObject features for debugging, we'll just do
it like this.
This should also fix some problems with bindings, which
seem to get confused when they get floating refs from
non-constructor functions (or functions annotated to
have a 'transfer full' return type). This works now:
from gi.repository import GObject, Gst
GObject.threads_init()
Gst.init(None)
pipeline=Gst.Pipeline()
bus = pipeline.get_bus()
pipeline.set_state(Gst.State.NULL)
del pipeline;
https://bugzilla.gnome.org/show_bug.cgi?id=679286https://bugzilla.gnome.org/show_bug.cgi?id=657202
This re-uses existing code and makes sure we properly serialise
and deserialise datetimes where not all fields are set (thus
fixing some warnings when serialising such datetimes).
Move the locking methods from GstMemory to GstMiniObject.
Add a miniobject flag to enable LOCKABLE objects. LOCKABLE objects can
use the lock/unlock API to control the access to the object.
Add a minobject flag that allows you to lock an object in readonly mode.
Modify the _is_writable() method to check the shared counter for LOCKABLE
objects. This allows us to control writability separately from the refcount for
LOCKABLE objects.
We added a minimum length of three letters originally so we would
fail to recognise DOS/Windows-style filenames as valid URIs (as we
should). Two should be just fine as well.
Now that TOCs are refcounted and have a GType, we can just
stuff a ref of the TOC directly into the various toc
event/message/query structures and get rid of lots of
cracktastic GstStructure <-> GstToc serialisation and
deserialisation code. We lose some TOC sanity checking
in the process, but that should really be done when
it's being created anyway.
Let's keep it simple for now:
gst_toc_setter_reset_toc() -> gst_toc_setter_reset()
gst_toc_setter_get_toc_copy() -> removed
gst_toc_setter_get_toc() -> returns a ref now
gst_toc_setter_get_toc_entry_copy() -> removed,
use TOC functions instead
gst_toc_setter_get_toc_entry() -> removed,
use TOC functions instead
gst_toc_setter_add_toc_entry() -> removed,
to avoid problems with (refcount-dependent)
writability of TOC; use TOC functions instead
When the bin does an upward state change, try to avoid doing a downward state
change on the child and vice versa.
Add some more unit tests for this fix.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=621833
It causes the timestamp to go wrong, should not cause much of a performance
increase and in the cases where it is faster, it is broken in 0.10 as well.
We should try to review this when rewriting the adapter for 0.11 memory
features.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=674791
Rename the _get_value_array() functions to _get_g_value_array() and reintroduce
the former to operate on plain unboxed c datatypes (like in 0.10). The _g_value
variants are for bindings while the _value ones are more suited to processing
in elements.
Add a new LOCKED flag to the metadata. Refuse removing LOCKED metadata from
a buffer.
Mark the metadata from the bufferpool LOCKED.
Add unit test for LOCKED flag
Remove GST_MAJORMINOR and replace it by GST_API_VERSION
Also set GST_VERSION_{MAJOR,MINOR,MICRO,NANO} explicitely
now.
All versions are at 1.0.0 now for the release soon but
API/ABI can still change until the 1.0.0 release.
Next release versions until 1.0.0 will be 0.10.9X and
these will be release candidates. GST_VERSION_* will
nonetheless stay at 1.0.0.0.
gst_buffer_take_memory -> gst_buffer_insert_memory because insert is what the
method does.
Make all methods deal with ranges so that we can replace, merge, remove and map
a certain subset of the memory in a buffer. With the new methods we can make
some code nicer and reuse more code. Being able to deal with a subset of the
buffer memory allows us to optimize more cases later (most notably RTP headers
and payload that could be in different memory objects).
Make some more convenient macros that call the more generic range methods.
Add gst_buffer_append() which appends the memory blocks from one buffer to
another. Remove the old inefficient _merge() and _join() methods which forced a
premature memcpy in most cases.
Remove the _is_span() and _span() methods they are not needed anymore now that
we can _append(). Merging and spanning will be delayed until mapping or maybe
not at all when the element can deal with the different memory blocks.
Make it possible to wrap all kinds of memory by exposing all properties to
gst_buffer_new_wrapped_full(). This makes it possible to also create writable
memory without a free function or memory with extra padding.
Make it so that one can specify a buffer for get/pull_range where the downstream
element should write into. When passing NULL, upstream should allocate a buffer,
like in 0.10.
We also need to change the probes a little because before the pull probe, there
could already be a buffer passed. This then allows us to use the same PROBE
macro for before and after pulling.
While we're at the probes, make the query probe more powerful by handling the
GST_PAD_PROBE_DROP return value. Returning _DROP from a query probe will now
return TRUE upstream and will not forward the probe to the peer or handler.
Also handle _DROP for get/pull_range properly by not dispatching to the
peer/handler or by generating EOS when the probe returns DROP and no buffer.
Make filesrc handle the non-NULL buffer passed in the get_range function and
skip the allocation in that case, writing directly into the downstream provided
buffer.
Update tests because now we need to make sure to not pass a random value in the
buffer pointer to get/pull_range
Group the extra allocation parameters in a GstAllocationParams structure to make
it easier to deal with them and so that we can extend them later if needed.
Make gst_buffer_new_allocate() take the GstAllocationParams for added
functionality.
Add boxed type for GstAllocationParams.
Change gst_allocator_alloc() so that we can also spicify flags and padding.
Add 2 new flags to mark the memory 0 prefixed/padded. This allows us to
remove some resizes in the base classes.
When allocating memory, memset prefix and padding with 0 when the flags tell
us to.
On resize, clear the zero padding flags if we can't guarantee the memory is
still 0 filled.
Update tests.
Rename _do_simplify() to _simplify(). The name was introduced as a replacement
method for a deprecated method but we can now rename it again.
Fix some docs.
Make gst_caps_do_simplify() take ownership of the input caps and produce a
simplified output caps. This removes the requirement of having writable input
caps and the method can make the caps writable only when needed.
Rework some caps operations so they don't rely on writable caps but instead take
ownership of the input caps and do _make_writable() only when needed.
Remove some const from caps functions, it does not make much sense for
refcounted objects and does not allow us to return a refcount to the const input
caps.
Rework the base classes fixate vmethods to not operate on the caps in-place.
All this saves us around 30% of caps and structure copy and new operations.
Sticky events pushed on an unlinked pad should be stored on the pad. When the
pad is then linked and an event is pushed, the event should be merged with the
already existing sticky events and then the sticky events should be pushed in
the order that they were originally pushed.
Should reproduce 'GStreamer-WARNING **: wrong STREAM_LOCK count 0'
warnings (with make pipelines/seek.torture or pipelines/seek.forever
anyway, since it appears to be racy).
https://bugzilla.gnome.org/show_bug.cgi?id=670846
Because gst_pad_get_pad_template_caps() returns ANY when there is no template,
the query caps function should also return ANY when there is no template (and no
pad current caps) instead of EMPTY.
Split out the registration of the metadata API and its implementation. Make a
GType for each metadata API. This allows us to store extra information with the
API type such as the tags.
Change the buffer API so that we can get the metadata using the API GType.
Change the query API so that we use the metadata API GType in the allocation
query instead of a string.
Update netaddress and unit tests
Account for rounding errors in some places, and that two nows are
not always entirely identical, so allow some leeway when comparing
microseconds and seconds. Ran into this too often, esp. when the
system is under load.
Flesh out the transform method. Add a type and extra info to the transform
function so that implementation can transform the metadata.
Remove the copy function and replace with the more generic transform.
Make it possible to configure a GDestroyNotify and user_data for
gst_memory_new_wrapped() this allows for more flexible wrapping of foreign
memory blocks.
Rename _is_writable() with _is_exclusive because the writability does not depend
on the amount of references to the memory object anymore.
Add accessor macros for the memory flags.
Rename the GstBuffer _peek_memory() method to _get_memory() and return a
reference to the memory now that we can do this without affecting writability
of the memory object. Make it possible to also make this function merge the
buffer memory.
Add methods to replace memory in a buffer. Make some convience macros for the
buffer memory functions.
Fix unit tests.
