Original commit message from CVS:
* tests/check/libs/gdp.c: (gst_dp_suite):
Use the architecture information from config.h and not gcc macros
in order to properly disable a test that fails on PPC64.
Original commit message from CVS:
* libs/gst/dataprotocol/dataprotocol.c:
(gst_dp_header_from_buffer_any), (gst_dp_packet_from_caps_any),
(gst_dp_crc), (gst_dp_header_payload_length),
(gst_dp_header_payload_type), (gst_dp_packet_from_event),
(gst_dp_packet_from_event_1_0), (gst_dp_buffer_from_header),
(gst_dp_caps_from_packet), (gst_dp_event_from_packet_0_2),
(gst_dp_event_from_packet), (gst_dp_validate_header),
(gst_dp_validate_payload):
Make debug category static
Constify the crc table.
Do some more arg checking in public functions.
Fix some docs and do some small cleanups.
* tests/check/libs/gdp.c: (GST_START_TEST), (gst_dp_suite):
Add some more checks to see if GDP deals with bogus input.
Original commit message from CVS:
* gst/gstelementfactory.c: (gst_element_factory_create):
Remove unnecessary ref/unref pair
* gst/parse/grammar.y:
Make sure to free the parse buffer on all code paths.
Move a g_free up to the error handler where it's easier to see.
* tests/check/gst/gstevent.c: (test_event):
Extending timeout for downstream travelling events to 10 seconds to
hopefully avoid intermittent failure on the buildbots.
* tests/check/pipelines/parse-launch.c: (run_delayed_test):
Don't manually set the state of the src element - it will happen as a
natural consequence of the pipeline changing state, and that way it
will do it in the right order too.
Original commit message from CVS:
* tests/check/pipelines/parse-launch.c: (GST_START_TEST):
Make all uses of identity and fakesink have silent=true to avoid
serialising every passing data structure, which is breaking tests
on FC4 for some unknown reason.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c: (gst_base_transform_setcaps):
Extra debug output
* tests/check/libs/gdp.c: (gst_dp_suite):
Take a whack at fixing the ppc compile using a different define to
disable the broken test.
* tests/check/pipelines/parse-launch.c: (GST_START_TEST):
Remove excess g_print()
Original commit message from CVS:
* tests/check/pipelines/parse-launch.c: (expected_fail_pipe):
Oops, meant to uncomment this line too to dampen the noise a bit.
Original commit message from CVS:
* gst/parse/grammar.y:
* gst/parse/parse.l:
* tests/check/pipelines/parse-launch.c: (expected_fail_pipe),
(GST_START_TEST), (parse_suite):
Fix some of the leaks exposed by extending the parse-launch testsuite,
and move the 3 I can't figure out into a separate test that won't run
the pipelines unless the appropriate line is uncommented.
Original commit message from CVS:
* gst/gststructure.c: (gst_structure_id_set),
(gst_structure_id_set_valist):
* gst/gststructure.h:
Add API for setting values into structures without performing
a quark lookup, if the appropriate quark is already known.
API: gst_structure_id_set
API: gst_structure_id_set_valist
* gst/parse/grammar.y:
* gst/parse/parse.l:
Remove some dead code shown by the coverage information.
Don't throw a critical g_warning when encountering a syntax error,
just warn and let the normal error path handle it.
* plugins/elements/gstelements.c:
Bump the rank of filesink up to PRIMARY so that it is preferred over
gnomevfssink for file:// sink uri's
* tests/check/pipelines/parse-launch.c: (expected_fail_pipe),
(GST_START_TEST), (run_delayed_test),
(gst_parse_test_element_base_init),
(gst_parse_test_element_class_init), (gst_parse_test_element_init),
(gst_parse_test_element_change_state),
(gst_register_parse_element), (parse_suite):
Beef up the tests for parse syntax to check that more error cases
fail as they are supposed to. Increases the test coverage a bit.
Original commit message from CVS:
* tests/check/libs/gdp.c: (gst_dp_suite):
the test_buffer test fails at line 140 on ppc64 at the following
check:
fail_unless (GST_BUFFER_FLAG_IS_SET (newbuffer, GST_BUFFER_FLAG_IN_CAPS),
"GST_BUFFER_IN_CAPS flag should have been copied !");
See bug #348114 for more details.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_update_length):
* tests/check/elements/filesrc.c: (GST_START_TEST):
Revert fix for regression in #347408 after release.
Original commit message from CVS:
Patch by: Antoine Tremblay <hexa00 at gmail com>
* gst/gstutils.c: (gst_element_unlink):
Free iterator when done (#347311).
* tests/check/gst/gstutils.c: (GST_START_TEST), (gst_utils_suite):
And add a test case for this.
Original commit message from CVS:
* gst/gstvalue.c: (gst_value_compare_list),
(gst_value_compare_array), (_gst_value_initialize):
* tests/check/gst/gstvalue.c: (GST_START_TEST):
Make GstValueArray comparison be order dependent as designed.
Add checks for value lists and value array comparisons.
Fixes#347221
Original commit message from CVS:
* gst/gstbin.c: (activate_pads),
(iterator_activate_fold_with_resync), (gst_bin_src_pads_activate),
(gst_bin_change_state_func):
(de)activate src pads before calling state_change on the childs.
This is to avoid the case where a src ghostpad is blocked (holding the
stream lock), which would block the deactivation of the ghostpad's
target pad.
* gst/gstghostpad.c: (gst_proxy_pad_do_query_type),
(gst_proxy_pad_do_event), (gst_proxy_pad_do_query),
(gst_proxy_pad_do_internal_link), (gst_proxy_pad_do_bufferalloc),
(gst_proxy_pad_do_chain), (gst_proxy_pad_do_getrange),
(gst_proxy_pad_do_checkgetrange), (gst_proxy_pad_do_getcaps),
(gst_proxy_pad_do_acceptcaps), (gst_proxy_pad_do_fixatecaps),
(gst_proxy_pad_do_setcaps), (gst_proxy_pad_set_target_unlocked),
(gst_proxy_pad_set_target), (gst_proxy_pad_get_internal),
(gst_proxy_pad_dispose), (gst_proxy_pad_init),
(gst_ghost_pad_parent_set), (gst_ghost_pad_parent_unset),
(gst_ghost_pad_class_init),
(gst_ghost_pad_internal_do_activate_push),
(gst_ghost_pad_internal_do_activate_pull),
(gst_ghost_pad_do_activate_push), (gst_ghost_pad_do_activate_pull),
(gst_ghost_pad_do_link), (gst_ghost_pad_do_unlink),
(gst_ghost_pad_dispose), (gst_ghost_pad_new_no_target),
(gst_ghost_pad_new), (gst_ghost_pad_set_target):
GhostPads now create their internal GstProxyPad at creation (and not
when they're linked, as it was being done previously).
The internal and target pads are linked straight away.
The data will also travel through the other pad in order to make
pad blocking and probes non-hackish (the probe/block now really happens
on the GhostPad and not on the target).
* gst/gstpad.c: (gst_pad_set_blocked_async),
(gst_pad_link_prepare), (gst_pad_push_event):
Remove previous ghostpad cruft.
* gst/gstutils.c: (gst_pad_add_data_probe),
(gst_pad_add_event_probe), (gst_pad_add_buffer_probe),
(gst_pad_remove_data_probe), (gst_pad_remove_event_probe),
(gst_pad_remove_buffer_probe):
Remove previous ghost pad cruft.
Added more detailed debug statements.
* tests/check/gst/gstghostpad.c: (GST_START_TEST):
Fix the testsuite for refcounting changes.
The comments about who has references were correct, but the refcount
being checked wasn't the same (!?!).
Original commit message from CVS:
* gst/gstobject.c: (gst_object_set_name_default),
(gst_object_set_name):
Random micro-optimisation: don't use a hash table
with strings as keys and the usual strdup/strcmp
involved, but rather just use the GQuark of the
type name as key, since it needs to be looked up
anyway to get the type name string.
* tests/check/gst/gstobject.c: (GST_START_TEST):
Fix various leaks.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_class_init),
(gst_base_src_wait), (gst_base_src_update_length),
(gst_base_src_get_range), (gst_base_src_default_check_get_range),
(gst_base_src_check_get_range), (gst_base_src_pad_check_get_range),
(gst_base_src_loop), (gst_base_src_start),
(gst_base_src_activate_pull):
Update docs.
blocksize == 0 now means the default blocksize when working in push
based mode.
Remove some pointless asserts in _wait function.
Fix offset/length calculations and EOS handling. We can now pull 0
bytes as well, which is allowed.
use _check_get_range() to decide if we can operate in _pull based
mode.
Fix refcounting leak when check_get_range function was not
implemented.
API GstBaseSrc::blocksize range can be 0 too now (default)
* tests/check/elements/filesrc.c: (GST_START_TEST),
(filesrc_suite):
Added check to test _get_range() behaviour.
Original commit message from CVS:
* gst/gstbuffer.c: (_gst_buffer_copy), (gst_buffer_create_sub):
* tests/check/gst/gstbuffer.c: (GST_START_TEST),
(gst_buffer_suite):
No point in checking if the size of the subbuffer > 0, the
code handles it correclty as demonstrated by unit test.
Also add a unit test for the zero sized _new_and_alloc and
_copy. Fixes#346663.
Original commit message from CVS:
* gst/gstpad.c: (handle_pad_block), (gst_pad_push_event):
Implement pad blocking on events according to part-block.txt.
More comments on behaviour.
* tests/check/gst/gstevent.c: (test_event):
Send event to peer pad of blocked pad (else it will block).
Original commit message from CVS:
* libs/gst/check/gstcheck.c: (gst_check_message_error),
(gst_check_run_suite):
if we get the wrong message, give us the types as string
* plugins/elements/gstfilesrc.c: (gst_file_src_start):
Fix a translatable
* tests/check/elements/filesrc.c: (GST_START_TEST):
add a test for trying to open a non-existing file
Original commit message from CVS:
* libs/gst/check/gstcheck.h:
add some assert_ as alias for fail_unless_*
* tests/check/gst/gst.c: (GST_START_TEST), (gst_suite):
increase test coverage
Original commit message from CVS:
* configure.ac:
don't set CFLAGS and friends for gcov, done from GST_GCOV now
* tests/check/Makefile.am:
clean up gcov files
Original commit message from CVS:
* libs/gst/dataprotocol/Makefile.am:
build dataprotocol test by linking to the lib, instead of
compiling the source, so we get coverage
* tests/check/Makefile.am:
* tests/check/elements/filesrc.c: (event_func), (setup_filesrc),
(cleanup_filesrc), (GST_START_TEST), (filesrc_suite):
add a test for filesrc
Original commit message from CVS:
* tests/check/Makefile.am:
gst-inspect every element; this makes sure that we also get
coverage on element's get/set functions
* tests/check/gst/gststructure.c: (GST_START_TEST),
(gst_structure_suite):
Push coverage from 59.04% to 70.00%
Original commit message from CVS:
* configure.ac:
set CFLAGS and friends to -O0 if gcov is being used
add GCOV LIBS
* gst/Makefile.am:
* libs/gst/base/Makefile.am:
* libs/gst/check/Makefile.am:
* libs/gst/controller/Makefile.am:
* libs/gst/dataprotocol/Makefile.am:
* libs/gst/net/Makefile.am:
* plugins/elements/Makefile.am:
* plugins/indexers/Makefile.am:
add makefile rules to generate gcov data and clean up
* tests/check/Makefile.am:
add a coverage target that generates an html overview
of coverage data
Original commit message from CVS:
* tests/check/pipelines/simple-launch-lines.c: (test_stop_from_app):
Attempt to 'fix' spuriously failing test case: it seems like the
timeout of half a second is simply too small when the system is under
load otherwise, and the timeout doesn't really seem to serve any
particular purpose here. Give the pipeline a few seconds to preroll
first, and then give it another half a second to go from PAUSED to
PLAYING and marshal the message into the main thread.
Original commit message from CVS:
* tests/check/gst/gstghostpad.c: (block_callback),
(GST_START_TEST), (gst_ghost_pad_suite):
Added some more ghostpad tests, mainly blocking
and probes.
Original commit message from CVS:
Patch by: Wouter Paesen <wouter at kangaroot net>
* libs/gst/controller/gstcontroller.c:
(gst_controlled_property_new):
Fix controlling of float properties (#344849).
* tests/check/libs/controller.c:
(gst_test_mono_source_get_property),
(gst_test_mono_source_set_property),
(gst_test_mono_source_class_init), (GST_START_TEST):
While we're at it, add some float stuff to unit test.
Original commit message from CVS:
* libs/gst/check/gstcheck.c: (gst_check_abi_list):
* libs/gst/check/gstcheck.h:
factor out the method from tests that checks size of structures,
and add code to generate the header containing these sizes
* tests/check/gst/gstabi.c: (GST_START_TEST):
* tests/check/gst/struct_i386.h:
* tests/check/libs/libsabi.c: (GST_START_TEST):
* tests/check/libs/struct_i386.h:
use it
Original commit message from CVS:
Patch by: Alessandro Decina <alessandro at nnva dot org>
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_stop):
Make sure the EOS flag is cleared from pads after a flush
or stop. Fixes#343538.
* tests/check/libs/collectpads.c: (GST_START_TEST),
(gst_collect_pads_suite):
Added test for collectpads reusage after EOS.
Original commit message from CVS:
Patch by: Alessandro Decina <alessandro at nnva dot org>
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_remove_pad):
Unlock mutex when removing an unknown pad.
Fixes#343334.
* tests/check/Makefile.am:
* tests/check/libs/collectpads.c: (collected_cb), (push_buffer),
(push_event), (setup), (teardown), (GST_START_TEST),
(gst_collect_pads_suite), (main):
Added collecpads check, disabled for now as check crashes for
some reason.
Original commit message from CVS:
* libs/gst/base/gsttypefindhelper.c: (buf_helper_find_peek):
Fix off-by-one bug that would only allow peeks of N-1 bytes
from the start even if the buffer to typefind on contains
in fact N bytes of data (makes vorbis typefinding from a
vorbis identification header buffer work).
* tests/check/Makefile.am:
* tests/check/libs/.cvsignore:
* tests/check/libs/typefindhelper.c: (GST_START_TEST),
(gst_typefindhelper_suite), (main), (foobar_typefind),
(plugin_init):
Add very basic unit test for gst_type_find_helper_for_buffer()
that checks for the problem fixed above.
Original commit message from CVS:
* gst/gstpad.c: (gst_flow_get_name), (gst_flow_to_quark):
* gst/gstpad.h:
Added _CUSTOM error and success GstFlowReturn that can be
used be elements internally.
Added macro to check for SUCCESS flowreturns.
API: GST_FLOW_CUSTOM_SUCCESS
API: GST_FLOW_CUSTOM_ERROR
API: GST_FLOW_IS_SUCCESS
* tests/check/gst/gstpad.c: (GST_START_TEST), (gst_pad_suite):
Added check for GstFlowReturn sanity.
Original commit message from CVS:
* tests/examples/helloworld/helloworld.c: (main):
Must plug audioconvert and audioresample between decoder
and audio sink.
Original commit message from CVS:
* gst/gstvalue.c: (gst_value_serialize_flags):
fix a leak if no flags are set
* tests/check/gst/gstvalue.c: (GST_START_TEST):
fix leak in tests
Original commit message from CVS:
* gst/gstevent.c: (_gst_event_initialize):
* gst/gstformat.c: (_gst_format_initialize):
make sure some essential types used by events are registered
as part of gst_init()
* gst/gstvalue.c: (gst_value_serialize_flags):
if no flags are set, serialize them to a value that represents NONE
so that deserializing them works
* tests/check/gst/gstvalue.c: (GST_START_TEST), (gst_value_suite):
add tests for serialization and deserialization of flags
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_init),
(gst_collect_pads_finalize), (gst_collect_pads_add_pad),
(gst_collect_pads_remove_pad), (gst_collect_pads_set_flushing),
(gst_collect_pads_start), (gst_collect_pads_stop),
(gst_collect_pads_peek), (gst_collect_pads_pop),
(gst_collect_pads_available), (gst_collect_pads_read),
(gst_collect_pads_flush), (gst_collect_pads_check_pads),
(gst_collect_pads_is_collected), (gst_collect_pads_event),
(gst_collect_pads_chain):
* libs/gst/base/gstcollectpads.h:
Clean up the mess that is collectpads, add comments and
FIXMEs where needed.
Maintain a separate pad list so we can add pads while
collecting the other ones. For this we need a new separate
lock (see comics).
Fix memory leak in finalize.
Refactor some weird code to set/unset pad flushing flags, mark
with comments.
Don't crash in _available, _read, _flush when we're EOS.
* tests/check/libs/.cvsignore:
Ignore adapter check binary.
Original commit message from CVS:
* docs/design/part-overview.txt:
Make upsteam/downstream concepts more clear.
Give an example of serialized/non-serialized events.
* docs/design/part-events.txt:
* docs/design/part-streams.txt:
Mention applied_rate.
* docs/design/part-trickmodes.txt:
Mention applied rate, flesh out some more use cases.
* gst/gstevent.c: (gst_event_new_new_segment),
(gst_event_parse_new_segment), (gst_event_new_new_segment_full),
(gst_event_parse_new_segment_full), (gst_event_new_tag),
(gst_event_parse_tag), (gst_event_new_buffer_size),
(gst_event_parse_buffer_size), (gst_event_new_qos),
(gst_event_parse_qos), (gst_event_parse_seek),
(gst_event_new_navigation):
* gst/gstevent.h:
Add applied_rate field to NEWSEGMENT event.
API: gst_event_new_new_segment_full()
API: gst_event_parse_new_segment_full()
* gst/gstsegment.c: (gst_segment_init), (gst_segment_set_seek),
(gst_segment_set_newsegment), (gst_segment_set_newsegment_full),
(gst_segment_to_stream_time), (gst_segment_to_running_time):
* gst/gstsegment.h:
Add applied_rate to GstSegment structure.
Make calculation of stream_time and running_time more correct
wrt rate/applied_rate.
Add some more docs.
API: GstSegment::applied_rate field
API: gst_segment_set_newsegment_full();
* libs/gst/base/gstbasesink.c: (gst_base_sink_configure_segment),
(gst_base_sink_get_sync_times), (gst_base_sink_get_position):
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc),
(gst_base_transform_handle_buffer):
Parse and use applied_rate in the GstSegment field.
* tests/check/gst/gstevent.c: (GST_START_TEST):
Add check for applied_rate field.
* tests/check/gst/gstsegment.c: (GST_START_TEST),
(gstsegments_suite):
Add more checks for various GstSegment operations.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
API: addition: gst_adapter_take_buffer()
* libs/gst/base/gstadapter.c: (gst_adapter_push),
(gst_adapter_peek), (gst_adapter_take), (gst_adapter_take_buffer),
(gst_adapter_available_fast):
* libs/gst/base/gstadapter.h:
Prepare for optimizing the hell out of this hugely inefficient
piece of code.
Added gst_adapter_take_buffer() so we can at least start thinking
about subbuffering and merging.
Added some comments.
* tests/check/Makefile.am:
* tests/check/libs/adapter.c: (GST_START_TEST),
(gst_adapter_suite), (main):
Added GstAdapter check.
Original commit message from CVS:
2006-04-29 Thomas Vander Stichele <thomas at apestaart dot org>
* tests/check/gst/gstghostpad.c: (GST_START_TEST):
add more asserts on refcounts
do more cleanup at end of tests
fix test leaks showing in FC5
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c:
(gst_controller_sync_values):
some little tuning
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
a new test for live value handling
Original commit message from CVS:
* gst/gstvalue.c: (gst_value_serialize_buffer),
(gst_value_deserialize_buffer):
Don't try to serialize a GValue with a NULL buffer.
Fixes#339821.
* tests/check/gst/gstvalue.c: (GST_START_TEST), (gst_value_suite):
Added check for serialisation of NULL buffers.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/controller/gstcontroller.c: (gst_controller_unset),
(gst_controller_unset_all):
* libs/gst/controller/gstcontroller.h:
Added new method _unset_all() and fixed _unset()
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
Added two testcases for new and fixed method
Original commit message from CVS:
* gst/gstelementfactory.c: (gst_element_register),
(gst_element_factory_create), (gst_element_factory_make):
Some cleanups.
Fixed a FIXME.
Updated docs (Fixes#131079)
* gst/gstpluginfeature.c: (gst_plugin_feature_load):
Small cleanups.
* tests/check/gst/gstelement.c: (GST_START_TEST),
(gst_element_suite):
Added testcase for elementfactory class field.
Original commit message from CVS:
* gst/parse/grammar.y:
Fix a leak in parse-launch for any source-or-sink named element
references used.
* tests/check/pipelines/parse-launch.c: (expected_fail_pipe):
Unref the pipeline if it exists after we've failed parsing.
Original commit message from CVS:
* tests/check/gst/gstghostpad.c: (GST_START_TEST):
Unref a pad we reffed.
* tests/check/gst/gstutils.c: (GST_START_TEST):
Unref bins
Original commit message from CVS:
* tests/check/generic/sinks.c: (GST_START_TEST):
Fix a variety of memleaks in sinks check, which are only sometimes
shown by running the tests under valgrind (weird?).
Original commit message from CVS:
* configure.ac:
* tests/check/Makefile.am:
disable some tests when we don't have a registry
* tests/check/gst/gstutils.c: (gst_utils_suite):
don't build the part that needs parsing
Original commit message from CVS:
* gst/gstbuffer.h:
* gst/gstevent.h:
* gst/gstmessage.h:
gst_[buffer|event|message]_ref() macros are replaced by a static
inline functions because gcc-4.1 will about if the return value
isn't used.
* tests/check/gst/gstevent.c: (event_probe):
gst_event_ref now has to be given a GstEvent* , fix check accordingly.
Original commit message from CVS:
* plugins/elements/gstfakesrc.c: (gst_fake_src_class_init),
(gst_fake_src_finalize):
Fix leaks in fakesrc.
* tests/check/pipelines/parse-launch.c: (GST_START_TEST):
Fix leaks in the testcase.
Original commit message from CVS:
* gst/gstclock.c: (gst_clock_entry_new),
(gst_clock_id_compare_func), (gst_clock_id_wait),
(gst_clock_id_wait_async), (gst_clock_id_unschedule),
(gst_clock_init), (gst_clock_get_internal_time),
(gst_clock_set_master), (do_linear_regression),
(gst_clock_add_observation), (gst_clock_set_property):
* gst/gstclock.h:
Review docs.
Small cleanups.
Fix a possible segfault when the window-size is made smaller.
Calculate jitter before performing the clock wait. Ideally
the clock implementation should calculate jitter but we need
API breakage for that.
* gst/gstsystemclock.c: (gst_system_clock_init):
Docs review.
* libs/gst/base/gstbasesink.c: (gst_base_sink_do_sync):
Remove leftover else
* tests/check/gst/gstsystemclock.c: (GST_START_TEST),
(gst_systemclock_suite):
Added check to test GST_CLOCK_DIFF.
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/libs/basesrc.c: (eos_event_counter),
(basesrc_eos_events_pull), (basesrc_eos_events_push),
(basesrc_eos_events_push_live_op), (basesrc_eos_events_pull_live_op),
(gst_basesrc_suite), (main):
... and add some tests for the base source EOS stuff.
Original commit message from CVS:
* tests/check/gst/gstutils.c: (test_buffer_probe_n_times):
Test case originally showed the problem fixed below,
but was then amended. Add checks back at the place
where they used to be.
Original commit message from CVS:
* tests/check/gst/gstutils.c: (data_probe), (buffer_probe),
(event_probe), (GST_START_TEST):
Only events up to the pipeline EOS are counted, there are
some more when going to NULL currently which we don't care
about for now.
Original commit message from CVS:
* tests/check/gst/gstutils.c: (test_parse_bin_from_description),
(gst_utils_suite):
Add some simple tests for gst_parse_bin_from_description() and
gst_bin_find_unconnected_pad() (#329069).
Original commit message from CVS:
* docs/design/part-element-sink.txt:
Updated document.
* libs/gst/base/gstbasesink.c: (gst_base_sink_init),
(gst_base_sink_finalize), (gst_base_sink_preroll_queue_flush),
(gst_base_sink_configure_segment), (gst_base_sink_commit_state),
(gst_base_sink_get_sync_times), (gst_base_sink_wait_clock),
(gst_base_sink_do_sync), (gst_base_sink_render_object),
(gst_base_sink_preroll_object),
(gst_base_sink_queue_object_unlocked),
(gst_base_sink_queue_object), (gst_base_sink_event),
(gst_base_sink_chain_unlocked), (gst_base_sink_chain),
(gst_base_sink_loop), (gst_base_sink_activate_pull),
(gst_base_sink_get_position), (gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
Totally refactored matching the design doc.
Use two segments, one to clip incomming buffers and another to
perform sync.
Handle queueing correctly, bypass the queue when playing.
Make EOS cancelable.
Handle errors correctly when operating in pull based mode.
* tests/check/elements/fakesink.c: (GST_START_TEST),
(fakesink_suite):
Added new check for sinks.
Original commit message from CVS:
* gst/gstutils.c: (gst_element_unlink_pads):
Don't leak pad references.
* tests/check/elements/fakesink.c: (GST_START_TEST):
* tests/check/generic/sinks.c: (GST_START_TEST):
* tests/check/generic/states.c: (GST_START_TEST):
* tests/check/gst/gstbin.c: (GST_START_TEST):
* tests/check/gst/gstcaps.c: (GST_START_TEST):
* tests/check/gst/gstelement.c: (GST_START_TEST):
* tests/check/gst/gstghostpad.c: (GST_START_TEST):
* tests/check/gst/gstiterator.c: (GST_START_TEST):
* tests/check/gst/gstvalue.c: (GST_START_TEST):
Fix a bunch of leaks. Make generic/sinks.c
use a bit less cpu by slowing the buffer rate
between fakesrc and fakesink.
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/gst/gstquery.c: (GST_START_TEST), (gstquery_suite),
(main):
Add a very simple check that should have caught the memleak I fixed
last night (if not for the slice allocator hiding it)
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/elements/fakesink.c: (chain_async_buffer),
(chain_async), (chain_async_return), (GST_START_TEST),
(fakesink_suite), (main):
Added fakesink test that checks prerolling and clipping
behaviour.
* tests/check/gst/gstutils.c: (GST_START_TEST):
Make check run faster so that buildbots don't timeout.
Original commit message from CVS:
* gst/gstbuffer.c: (gst_buffer_is_metadata_writable),
(gst_buffer_make_metadata_writable):
* gst/gstbuffer.h:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buf):
* plugins/elements/gstcapsfilter.c: (gst_capsfilter_prepare_buf):
* tests/check/gst/gstbuffer.c: (GST_START_TEST), (gst_test_suite):
Replace gst_buffer_(make|is)_metadata_writable patch now
that the release is out.
Original commit message from CVS:
* gst/gstbuffer.c:
* gst/gstbuffer.h:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buf):
* plugins/elements/gstcapsfilter.c: (gst_capsfilter_prepare_buf):
* tests/check/gst/gstbuffer.c: (gst_test_suite):
Back out patch until after the release.
Original commit message from CVS:
Reviewed By: Andy Wingo
* gst/gstbuffer.c: (gst_buffer_is_metadata_writable),
(gst_buffer_make_metadata_writable):
* gst/gstbuffer.h:
Add gst_buffer_(is|make)_metadata_writable as analogues of
gst_buffer_(is|make)_writable.
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buf):
* plugins/elements/gstcapsfilter.c: (gst_capsfilter_prepare_buf):
Use name gst_buffer_(is|make)_metadata_writable functions.
* tests/check/gst/gstbuffer.c: (GST_START_TEST), (gst_test_suite):
Test gst_buffer_(is|make)_metadata_writable
(Closes: #324162)
Original commit message from CVS:
* gst/gstminiobject.c: (gst_value_mini_object_lcopy):
Fix lcopy for mini objects, the mini object needs to be ref'ed.
* tests/check/gst/gstminiobject.c: (my_foo_init),
(my_foo_get_property), (my_foo_set_property), (my_foo_class_init),
(test_value_collection), (gst_mini_object_suite):
Add test to ensure refcounts end up as expected when passing
GstMiniObjects through g_object_get() and g_object_set().
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_activate_pull), (gst_pad_link_prepare):
Don't allow activation of a srcpad in pull_range if it has no
getrange function.
Change some debug statements to be a little clearer
* plugins/elements/gsttypefindelement.c:
(gst_type_find_handle_src_query):
Check that we have a peer before executing queries thereupon.
* tests/examples/metadata/read-metadata.c: (message_loop):
Use gst_bus_pop instead of gst_bus_poll when we just want it to
immediately return us any available message with 0 timeout.
Original commit message from CVS:
* gst/gstpluginfeature.c: (gst_plugin_feature_finalize),
(gst_plugin_feature_load):
more meaningful debug output
* configure.ac:
* tests/Makefile.am:
* tests/old/examples/Makefile.am:
make make distcheck happy again
Original commit message from CVS:
* tests/examples/typefind/typefind.c: (type_found):
* tests/examples/xml/runxml.c: (xml_loaded):
More gcc4 fixes and a mem leak fix.
Original commit message from CVS:
* gst/gstsegment.c: (gst_segment_init),
(gst_segment_set_last_stop), (gst_segment_set_seek),
(gst_segment_set_newsegment), (gst_segment_to_stream_time),
(gst_segment_to_running_time):
Added more documentation.
Make sure the last_pos value is updated properly.
Make sure to_stream_time and to_running_time don't
operate on wrong values.
* tests/check/gst/gstsegment.c: (GST_START_TEST):
Update check.
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/libs/libsabi.c: (GST_START_TEST), (gstabi_suite),
(main):
* tests/check/libs/struct_i386.h:
Added ABI check for libs, this time for real
Original commit message from CVS:
* configure.ac:
* gst/Makefile.am:
* gst/gst.c:
* gst/gstplugin.h:
* gst/gstregistry.h:
* tests/benchmarks/complexity.c:
* tests/benchmarks/mass-elements.c:
* tests/check/Makefile.am:
* tools/Makefile.am:
* tools/gst-inspect.c:
* tools/gst-xmlinspect.c:
various fixes to make
--disable-nls --disable-registry --disable-loadsave --disable-parse --disable-gst-debug
work and get the core .so down to 360444 bytes after stripping
Original commit message from CVS:
* configure.ac:
* tests/bench-complexity.scm:
* tests/bench-mass_elements.scm:
* tests/complexity.c:
* tests/complexity.gnuplot:
* tests/instantiate/.cvsignore:
* tests/instantiate/Makefile.am:
* tests/instantiate/caps.c:
* tests/mass_elements.c:
* tests/network-clock-utils.scm:
* tests/network-clock.scm:
* tests/plot-data:
First pass at cleaning up tests/ dir before moving the rest
Combined with CVS surgery
Original commit message from CVS:
* check/Makefile.am:
look in the right place for elements, a lot more chance of
success
* gst/Makefile.am:
remove indexers and elements subdirs
* plugins/Makefile.am:
make indexers conditional
Original commit message from CVS:
* check/gst/gstutils.c: (GST_START_TEST):
Updated check, add some scaling accuracy checking code.
* gst/gstutils.c: (gst_util_div128_64),
(gst_util_uint64_scale_int64), (gst_util_uint64_scale),
(gst_util_uint64_scale_int):
Fix 6 times faster division code. Optimize for common
1/1 and less common X/1 cases.
Original commit message from CVS:
* check/gst/gstutils.c: (GST_START_TEST), (gst_utils_suite):
More checks.
* gst/gstclock.c: (gst_clock_finalize), (gst_clock_set_master),
(do_linear_regression), (gst_clock_add_observation):
Cleanups.
Release lock when the clock cannot be slaved.
Catch the case where the regression returned an invalid denominator.
* gst/gstutils.c: (gst_util_div128_64_iterate),
(gst_util_div128_64), (gst_util_uint64_scale_int64),
(gst_util_uint64_scale), (gst_util_uint64_scale_int):
Add protentially more performant non-iterative 128/64 divide function
that unfortunatly does not work yet.
Shortcut the trivial 0/X = 0 case.
Remove the warnings on overflow.
Original commit message from CVS:
* check/Makefile.am:
* check/elements/fdsrc.c: (GST_START_TEST):
Use a cmdline define to specify the location of a file to use for
testing, to avoid breaking distcheck.
Original commit message from CVS:
* check/gst/gstutils.c: (GST_START_TEST), (gst_utils_suite):
Added more checks for the high precision uint64 cases.
* gst/gstutils.c: (gst_util_uint64_scale_int64),
(gst_util_uint64_scale), (gst_util_uint64_scale_int):
Implement high precission (guint64 * guint64) / guint64.
Original commit message from CVS:
* check/gst/gstminiobject.c: (thread_ref), (GST_START_TEST),
(gst_mini_object_suite):
don't use check calls from threads; check probably isn't
threadsafe and using a lock to make it threadsafe would
defeat the purpose of this check
* gst/check/gstcheck.c:
* gst/check/gstcheck.h:
use GST_DEBUG some more
Original commit message from CVS:
* check/gst/gstutils.c: (GST_START_TEST), (gst_utils_suite):
Added test for scaling.
* gst/gstclock.h:
Small doc fix.
* gst/gstutils.c: (gst_util_uint64_scale_int):
Implemented high precision scaling code.
