Wim Taymans
0b1a7edfea
rtpjitterbuffer: send lost event before signaling next buffer
...
First send the lost event, then update the next_seqnum counter and then
send the signal to the pushing thread that it can retry to push a buffer. This
avoids pushing out buffers before the lost event is pushed.
2013-09-23 14:45:25 +02:00
Wim Taymans
5051f51f0a
jitterbuffer: configure clock-rate on jitterbuffer
...
Add a get and setter to configure the clock-rate in the jitterbuffer instead of
passing it as an argument to the insert method.
2013-09-23 14:45:24 +02:00
Wim Taymans
3c421e7e48
rtpjitterbuffer: add option to reset retransmission timers
2013-09-23 14:45:24 +02:00
Wim Taymans
6f4deab298
rtpjitterbuffer: stop the timer thread
...
The timeout code could release the lock so we need to check if we are allowed to
wait for the clock some more.
2013-09-23 14:45:24 +02:00
Wim Taymans
cba4e6a707
rtpjitterbuffer: unlock only once
2013-09-23 14:45:24 +02:00
Wim Taymans
5dc207948c
rtpjitterbuffer: improve flush and shutdown
...
There is no need to unschedule the timer in flush-start, flush-stop will remove
the timers and unschedule.
Unschedule the current timer before attempting to join the timer thread.
2013-09-23 14:45:23 +02:00
Wim Taymans
a512cc2d3c
rtpjitterbuffer: set correct expected time
...
When we already have a timer for a packet, skip it but don't forget to adjust
the dts to the expected dts of the next packet.
2013-09-23 14:45:23 +02:00
Wim Taymans
517ea0f4d9
jitterbuffer: improve debug
2013-09-23 14:45:23 +02:00
Wim Taymans
fd6c57cf10
rtpjitterbuffer: keep delay as a separate variable in timer
...
Keep a separate delay in the timer so that we still know the original timestamp
of the packet that this timer refers to. We can then place the correct
running-time in the Retransmission event.
2013-09-19 14:32:48 +02:00
Wim Taymans
d34184dd03
rtpjitterbuffer: fix writability of properties
2013-09-19 14:32:48 +02:00
Wim Taymans
6bb2626498
rtpjitterbuffer: reevaluate the current timer after timeout
...
When we trigger the timeout logic of a timer, reevaluate it because it is
possible that it still has the lowest timeout.
2013-09-18 16:33:40 +02:00
Wim Taymans
8d021b6ede
rtpjitterbuffer: don't update time when unscheduled
...
Don't try to estimate the current time when we got unscheduled.
2013-09-18 16:31:26 +02:00
Wim Taymans
65606a25bf
rtpjitterbuffer: init packet spacing on first buffer
...
Already init the packet spacing variables on the first buffer so that we can
calculate the spacing on the second buffer already.
2013-09-18 16:29:37 +02:00
Wim Taymans
f2efdf28f5
rtpjitterbuffer: push the lost event from the timer thread
...
Instead of pushing the lost event from the chain function, schedule a timeout
that will push the lost event from the timer thread. This avoid blocking the
upstream thread while we push and sync the event.
2013-09-18 14:57:09 +02:00
Wim Taymans
5d5fc03e04
rtpjitterbuffer: round gap duration to multiple of duration
...
Make sure the gap duration in the lost event is a multiple of the packet
duration.
Enable another test.
2013-09-18 14:12:47 +02:00
Wim Taymans
6e4a051d40
rtpjitterbuffer: keep track of duration
...
Keep track of the estimated duration of missing packets and use it in the lost
event.
Enable another unit test
2013-09-18 12:29:38 +02:00
Wim Taymans
ac3bb3acf6
rtpjitterbuffer: handle large gaps with one lost event
...
When we have a large number of missing packets, generate one lost event for all
the packets that have no chance of being pushed out in time.
Fix and activate unit test for large gaps.
2013-09-18 11:59:28 +02:00
Wim Taymans
26402e1c21
rtpjitterbuffer: refactor lost event sending
...
Also make sure we only increment the expected seqnum and last
output timestamp.
2013-09-18 11:57:06 +02:00
Wim Taymans
f49981a597
jitterbuffer: refactor timeout triggers
2013-09-17 23:29:56 +02:00
Wim Taymans
047021c443
jitterbuffer: simplify the timeout code
...
Keep track of the current time in the timeout loop.
Loop over all timers and trigger all the expired ones, we can do this in the
same loop that selects the new best timer.
2013-09-17 23:29:56 +02:00
Wim Taymans
fa1ef3328b
jitterbuffer: rearrange timer update code
...
Also update the timers when retransmission is disabled. We need to
do this because when we added LOST timers when we detected missing packets and
we need to remove those timers when the packet finally arrives.
2013-09-17 23:29:56 +02:00
Wim Taymans
232fdd8b56
jitterbuffer: release lock on shutdown
2013-09-17 15:19:42 +02:00
Wim Taymans
4de919a17a
jitterbuffer: use separate thread for timeouts
...
Use a separate thread for scheduling the timeouts instead of using the
downstream streaming thread that might block at any time.
2013-09-16 15:55:55 +02:00
Wim Taymans
9f9ba21404
jitterbuffer: handle segments with non-0 start
...
We keep the DTS and PTS in running-time inside the jitterbuffer. Make sure to
transform it back to a buffer timestamp before pushing out the buffer.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=707931
2013-09-12 15:04:30 +02:00
Wim Taymans
454d75951e
jitterbuffer: fix types of the retransmission event
2013-08-27 09:55:52 +02:00
Wim Taymans
dd4af0d11c
jitterbuffer: only timeout EXPECTED timers on gap
...
Only timeout the EXPECTED timers when we detect a large seqnum gap.
2013-08-27 09:44:18 +02:00
Wim Taymans
587dc055e9
jitterbuffer: handle EOS
...
When the queue is empty, and we received EOS, pause and push an EOS
event downstream.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=706387
2013-08-20 14:36:59 +02:00
Wim Taymans
533f26fc99
jitterbuffer: update docs
2013-08-20 10:26:15 +02:00
Wim Taymans
c7f9ef8012
jitterbuffer: update all timers
...
Keep looping over all registered timers so that we can mark them lost instead of
stopping as soon as we find the timer for the current seqnum.
2013-08-20 10:25:17 +02:00
Wim Taymans
5debda9ca1
jitterbuffer: remove unused variables
2013-08-20 08:55:50 +02:00
Wim Taymans
a88db5fa2c
jitterbuffer: reorganize timer handling
...
Restructure handling of incomming packet and the gap with the expected seqnum
and register all timers from the _chain function.
Convert a timer to a LOST packet timer when the max amount of retransmission
requests has been reached.
2013-08-19 22:04:51 +02:00
Wim Taymans
d9d6eac4bb
jitterbuffer: refactor packet spacing calculation
2013-08-19 22:04:50 +02:00
Wim Taymans
c4dc159656
jitterbuffer: keep track of last seqnum and dts
2013-08-19 22:04:50 +02:00
Wim Taymans
652ce95ca6
jitterbuffer: small cleanups
2013-08-19 22:04:50 +02:00
Wim Taymans
b4a35bbe82
jitterbuffer: reset retransmission timers in add/reschedule
...
Reset the retransmission timers when adding and rescheduling a timer.
2013-08-19 22:04:50 +02:00
Wim Taymans
cf8a0652f3
jitterbuffer: rename variables for packet spacing
2013-08-19 22:04:50 +02:00
Wim Taymans
ec82e4ab7c
jitterbuffer: remove lost timer when we get the packet
...
When we receive a packet, also remove the LOST timer for it.
2013-08-19 22:04:50 +02:00
Wim Taymans
2f03b43b21
jitterbuffer: expected seqnum must increase
...
Only update the expected seqnum when it is bigger than the previous expected
seqnum.
2013-08-19 22:04:50 +02:00
Wim Taymans
c5bf376bb5
jitterbuffer: add more debug
2013-08-19 22:04:50 +02:00
Wim Taymans
f11c2c9b3b
jitterbuffer: forward flush before stopping dataflow
...
First forward the flush event and then stop our loop function.
2013-08-14 16:19:32 +02:00
Tim-Philipp Müller
7469cd3a4c
rtpmanager: use generic marshaller
2013-08-04 11:03:07 +01:00
Wim Taymans
7584f91f31
jitterbuffer: send event in right direction
2013-08-04 00:24:36 +02:00
Wim Taymans
743e1b1191
jitterbuffer: fix property ranges
2013-08-02 17:22:55 +02:00
Wim Taymans
cd0164f4cc
jitterbuffer: push retransmission events
2013-08-02 16:43:59 +02:00
Wim Taymans
9a13267e85
jitterbuffer: add support for retransmission retry
...
When we didn't receive a packet after requesting retransmission, retry
asking for retransmission for a certain period.
2013-08-02 14:54:56 +02:00
Wim Taymans
e9ad5126db
jitterbuffer: add properties
...
Add properties to control retransmission parameters
2013-08-02 14:47:56 +02:00
Wim Taymans
a8c7ff7489
jitterbuffer: use corrected timeout when rescheduling
...
When we recalculate the timeout, use the corrected timeout value depending on
the timer type.
2013-08-02 12:44:58 +02:00
Wim Taymans
9c7e3e3455
jitterbuffer: update timers after queueing
...
Else we might update the timer needlessly for duplicates.
2013-08-02 12:43:00 +02:00
Wim Taymans
ebd6b8f8ab
jitterbuffer: move method up
2013-08-02 12:42:08 +02:00
Wim Taymans
f6b6797874
jitterbuffer: small cleanup
2013-08-02 06:28:32 +02:00
