Original commit message from CVS:
* gst/qtdemux/qtdemux.c: (qtdemux_audio_caps):
Add mapping for IMA Loki SDL MJPEG ADPCM codec.
Add some alternative byteswapped mappings that seem to pop up sometimes.
Fixes#550288.
Original commit message from CVS:
* po/LINGUAS:
* po/POTFILES.in:
* po/POTFILES.skip:
Add 'ca' to LINGUAS; add some more files with translations and some
files which should be ignored by translation tools.
Original commit message from CVS:
* ext/speex/gstspeexdec.c: (speex_dec_chain_parse_data):
* ext/speex/gstspeexdec.h:
* ext/speex/gstspeexenc.c: (gst_speex_enc_encode):
* ext/speex/gstspeexenc.h:
Use integer encoding and decoding functions instead of converting
the integer input to float in the element. The libspeex integer
functions are doing this for us already or, if libspeex was compiled
in integer mode, they're doing everything using integer arithmetics.
Also saves some copying around.
Original commit message from CVS:
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_reset),
(gst_wavpack_enc_push_block), (gst_wavpack_enc_chain):
* ext/wavpack/gstwavpackenc.h:
Handle non-zero start timestamps and stream discontinuities
correctly. This only has an effect if we're muxing into
a container format as the raw WavPack stream must contain
continous sample numbers.
Original commit message from CVS:
* ext/speex/gstspeexenc.c: (gst_speex_enc_encode):
Correct the timestamp and granulepos calculation by one Speex
frame.
Original commit message from CVS:
* ext/speex/gstspeexdec.c: (speex_dec_chain_parse_data):
Correctly take the granulepos from upstream if possible and
correctly handle the granulepos in various calculations: the
granulepos is the sample number of the _last_ sample in a frame, not
the first.
* ext/speex/gstspeexenc.c: (gst_speex_enc_sinkevent),
(gst_speex_enc_encode), (gst_speex_enc_chain),
(gst_speex_enc_change_state):
* ext/speex/gstspeexenc.h:
Handle non-zero start timestamps in the encoder and detect/handle
stream discontinuities. Fixes bug #547075.
Original commit message from CVS:
Patch by: Craig Keogh <cskeogh at adam dot com dot au>
* ext/annodex/gstcmmlparser.c: (gst_cmml_parser_parse_chunk):
Fix compiler warnings caused by passing a string as format string
instead of "%s" and then the string. This is only exposed by -Wformat=2
as used by default on Ubuntu. Fixes bug #550015.
Original commit message from CVS:
Patch by: Mersad Jelacic <mersad at axis dot com>
* gst/multipart/multipartdemux.c:
* gst/multipart/multipartmux.c: (gst_multipart_mux_get_mime):
Convert audio/x-adpcm to and from the audio/G726-X in the muxer and
demuxer. Fixes#549551.
Original commit message from CVS:
* sys/osxaudio/gstosxaudiosink.c:
(gst_osx_audio_sink_select_device):
* sys/osxaudio/gstosxaudiosrc.c:
(gst_osx_audio_src_create_ringbuffer),
(gst_osx_audio_src_select_device):
* sys/osxaudio/gstosxringbuffer.c: (gst_osx_ring_buffer_acquire):
Fix the build on macosx.
Original commit message from CVS:
* gst/icydemux/gsticydemux.c:
Small docs fix: in the example pipeline, we need to pass
iradio-mode=true to the source, so the server actually sends
an ICY stream.
Original commit message from CVS:
* sys/osxaudio/Makefile.am:
* sys/osxaudio/gstosxaudio.c:
* sys/osxaudio/gstosxaudiosink.c:
* sys/osxaudio/gstosxaudiosink.h:
* sys/osxaudio/gstosxaudiosrc.c:
* sys/osxaudio/gstosxaudiosrc.h:
* sys/osxaudio/gstosxringbuffer.c:
* sys/osxaudio/gstosxringbuffer.h:
Rewrite caps setting and ring buffer initialisation.
Previously we never told CoreAudio what format we were going to send it,
so it only worked due to luck, and not at all on some hardware.
Now we explicitly advertise what formats the hardware supports, and then
configure the selected one correctly.
Original commit message from CVS:
* sys/v4l2/gstv4l2object.c:
* sys/v4l2/gstv4l2src.c:
* sys/v4l2/gstv4l2src.h:
* sys/v4l2/v4l2_calls.c:
* sys/v4l2/v4l2src_calls.c:
Fix memory leaks. Small code cleanups : No need for empty _init(). No
need to memset instance structures. Some more FIXME's.
Original commit message from CVS:
* gst/matroska/matroska-demux.c: (gst_matroska_demux_send_event),
(gst_matroska_demux_video_caps), (gst_matroska_demux_audio_caps):
* gst/matroska/matroska-mux.c:
(gst_matroska_mux_video_pad_setcaps),
(gst_matroska_mux_audio_pad_setcaps), (gst_matroska_mux_finish):
Add Real[Audio|Video] support to Matroska containers.
It works fine for:
* decoding real audio/video streams contained in mkv
* 'transmuxing' real (.rm) files into .mkv files
It will not work though for encoding real[audio/video] streams that
don't contain the 'mdpr_data' extra data on the caps.
The reason why this will not work is because I never intended to
duplicate virtually all the 'mdpr' block creation into mkvmux.
Fixes#536067
Original commit message from CVS:
* gst/law/alaw-encode.c: (gst_alaw_enc_init), (gst_alaw_enc_chain):
* gst/law/mulaw-conversion.c:
* gst/law/mulaw-encode.c: (gst_mulawenc_init),
(gst_mulawenc_chain):
The encoder can't really renegotiate at the time they perform a
pad-alloc so make the srcpads use fixed caps.
Check the buffer size after a pad-alloc because the returned size might
not be right when the downstream element does not know the size of the
new buffer (capsfilter). Fixes#549073.
Original commit message from CVS:
Patch by: Filippo Argiolas <filippo dot argiolas at gmail dot com>
* sys/v4l2/gstv4l2tuner.c: (gst_v4l2_tuner_set_norm_and_notify):
v4l2src doesn't have a property named "norm" so don't try to notify
about changes to that property. The "norm" property and related
code are commented out currently. Fixes bug #549090.
Original commit message from CVS:
Patch by: Mike Ruprecht <cmaiku at gmail dot com>
* sys/v4l2/gstv4l2object.c: (gst_v4l2_class_probe_devices):
Reprobe devices again instead of taking a cached list as new
devices could've been plugged in. Fixes bug #549062.
Original commit message from CVS:
* gst/autodetect/Makefile.am:
Don't link the autodetect plugin with GConf as it doesn't
use GConf. Fixes bug #545463.
Original commit message from CVS:
* gst/matroska/ebml-read.c: (gst_ebml_read_element_id),
(gst_ebml_read_element_length), (gst_ebml_read_uint),
(gst_ebml_read_sint), (gst_ebml_read_float),
(gst_ebml_read_header):
Change some GST_ELEMENT_ERRORs to GST_ERROR_OBJECT to make it
possible to ignore errors and not post any ERROR messages on
the bus.
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_parse_contents):
Ignore any errors and not just EOS when parsing the contents of
a SeekHead. Errors here are usually caused by truncated files
and playback of the file works fine. Fixes playback of the
audio_only_chapter_seekbroken.mka file from the MPlayer samples
archive.
Original commit message from CVS:
* gst/multipart/multipartdemux.c:
* gst/multipart/multipartmux.c:
Conform to RFC2046. audio/basic is mulaw 8000Hz mono.
Original commit message from CVS:
* sys/directdraw/gstdirectdrawsink.c (gst_directdraw_sink_buffer_alloc,
gst_directdraw_sink_bufferpool_clear):
Fix two more buffer ref leaks.
Original commit message from CVS:
Patch by: Ole André Vadla Ravnås <ole.andre.ravnas at tandberg com>
* sys/directdraw/gstdirectdrawsink.c:
(gst_directdraw_sink_show_frame):
Fix buffer ref leak.
Original commit message from CVS:
* gst/wavenc/gstwavenc.c: (gst_wavenc_chain):
Revert the last commit. wavenc still supports width!=depth for 32 bit
width. Thanks Tim.
Original commit message from CVS:
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_parse_blockgroup_or_simpleblock):
If the duration of a block is unknown only use the timestamp for the
first lace and use GST_CLOCK_TIME_NONE as duration for the following
laces. Otherwise every lace has the same timestamp which leads to
various problems. Really fixes bug #548831.
Original commit message from CVS:
* gst/wavenc/gstwavenc.c: (gst_wavenc_chain):
If we're not allowing width!=depth in wavenc we should also disable
the code that was added to support width!=depth.
Original commit message from CVS:
* gst/matroska/matroska-demux.c: (gst_matroska_demux_add_stream):
Don't calculate the default duration of a frame from the audio sampling
rate. This only works for raw audio if every frame contains a single
sample and results in broken buffer durations for other formats
if no specified default duration is given or the blocks have no
duration. Fixes bug #548831.
Original commit message from CVS:
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_parse_blockgroup_or_simpleblock):
Allow zero sized blocks instead of returning GST_FLOW_OK. Such blocks
are used for text/plain subtitles as a gap-filler in some files.
Original commit message from CVS:
* sys/v4l2/gstv4l2src.c: (gst_v4l2src_v4l2fourcc_to_structure),
(gst_v4l2_get_caps_info):
Add S910 and PWC formats with a low priority.
* sys/v4l2/v4l2src_calls.c: (gst_v4l2src_format_get_rank),
(gst_v4l2src_probe_caps_for_format):
Add more debugging.
Original commit message from CVS:
* gst/rtsp/gstrtspgoogle.c:
Things that can happen when your brain is in google mode trying to
deal with their google rtsp server extensions and trying to type your
google mail account.
Original commit message from CVS:
* gst/rtsp/Makefile.am:
* gst/rtsp/gstrtsp.c: (plugin_init):
* gst/rtsp/gstrtspgoogle.c: (gst_rtsp_google_before_send),
(gst_rtsp_google_after_send), (gst_rtsp_google_get_transports),
(_do_init), (gst_rtsp_google_base_init),
(gst_rtsp_google_class_init), (gst_rtsp_google_init),
(gst_rtsp_google_finalize), (gst_rtsp_google_change_state),
(gst_rtsp_google_extension_init):
* gst/rtsp/gstrtspgoogle.h:
Add google RTSP extension, it can only handle udp and responds with
unsupported if we do anything else. Fixes#546465.
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_connection_send),
(gst_rtspsrc_connection_receive), (gst_rtspsrc_loop_send_cmd),
(gst_rtspsrc_create_transports_string),
(gst_rtspsrc_setup_streams), (gst_rtspsrc_open),
(gst_rtspsrc_close), (gst_rtspsrc_pause):
Make transport setup code a bit better using GString.
Add some more debug.
Check for closed connections before doing anything on them.
Original commit message from CVS:
* ext/pulse/pulsesrc.c: (gst_pulsesrc_class_init),
(gst_pulsesrc_create_stream), (gst_pulsesrc_negotiate),
(gst_pulsesrc_prepare):
* ext/pulse/pulseutil.c: (gst_pulse_gst_to_channel_map),
(gst_pulse_channel_map_to_gst):
* ext/pulse/pulseutil.h:
If downstream provides no channel layout and >2 channels should be
used use the default layout that pulseaudio chooses and also
add this layout to the caps. Fixes bug #547258.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_stream_configure_udp_sink):
Don't try to configure RTCP back to the server when the server did not
give us a valid port number.
Original commit message from CVS:
* gst/videobox/gstvideobox.c: (gst_video_box_set_property):
Use new basetransform method to renegotiate. Fixes#544956.
* tests/icles/Makefile.am:
* tests/icles/videobox-test.c: (make_pipeline), (main):
Add videobox renegotiation example.
Original commit message from CVS:
* ext/pulse/pulsesink.c: (gst_pulsesink_prepare):
* ext/pulse/pulsesrc.c: (gst_pulsesrc_prepare):
The bytes_per_sample and silence_sample fields of the GstRingBufferSpec
are already filled with the correct values by
gst_ring_buffer_parse_caps() so there's no need to set them again
with wrong values.
Original commit message from CVS:
* gst/avi/gstavidemux.c: (gst_avi_demux_read_subindexes_pull),
(gst_avi_demux_read_subindexes_push):
Some AVI 2.0 (ODML) files don't respect the 'specifications' completely
and instead of using the 'ix##' nomenclature, use '##ix'.
They're still valid though, this fixes the duration and indexes for
virtually all the ODML files I have.
