_BAD_CFLAGS should always come first, then GST_PLUGINS_BASE_CFLAGS,
then GST_BASE_CFLAGS then GST_CFLAGS. Same for libs: first plugins
base libs, then GST_BASE_LIB then GST_LIBS.
The whole tree is likely to switch to GTK 3.0 at some point, but
we might as well continue building with slightly less new versions
if it's not hard to do.
Fix some racyness as the test was checking the idle property
right after it got the preview message for video recordings. In some
conditions, it might happen that camerabin2 still hasn't decremented
the processing counter after posting the preview and/or the image/video-done
message and the test will get idle=false and fail.
The approach for checking for the idle property was a busy loop with
a sleep. Far from elegant, but good enough for these tests.
Instead of having a single VC1SequenceHeader structure, use the 3 structs
from the "Table 265: Sequence Layer Data Structure" of the specification
for the library to be more flexible.
Implement the functions to parse them
camerabing example had a missing ')' and the fix to build against GTK+3
that was introduced in commit 516c977c76
is also applied to the camerabin2 example.
The scaletempo demo was using API which has been removed, so that's
wrapped in a version check.
Adding some additional checks for custom camerabin2 messages
Also improves reliability of the tests by waiting for the preview-buffer message.
This message is generated from the preview pipeline, and might arrive later than the
image/video-done from the main camerabin2 pipeline, the tests need to wait for it even
after getting the image/video-done.
A flags property has been added to encodebin to toggle whether the
conversion elements (ffmpegcolorspace, videoscale, audioconvert,
audioresample, audiorate) are created and linked into the appropriate
branches of encodebin.
Not including these elements avoids some slow caps negotiation and
allows the first buffers to flow through encodebin much more quickly.
However, it imposes that the uncompressed input is appropriate for the
target profile and elements selected to meet that profile.
Adds performance (timing) measure feature to gst-camerabin2-test, it allows
users to specify some target values for commonly measured times and the
application will print out a table of values at the end of its execution
with the measured times and averages of them.
Compares colorspace result with ffmpegcolorspace output using SSIM.
Also probes for possible crashes for odd width and height image by applying
all possible colorspace transformations.
Allow context callbacks to perform custom buffer verification
and custom element setup. Also move some static tracking variables
into helper struct and expose the latter struct for use by unit test
(callbacks).
Add command-line options for setting image-capture, viewfinder
and video-capture caps as strings.
The width and height properties are now used only if these new caps
properties aren't set.
We must wait for camerabin2's stop-capture procedures to finish before quitting
the main loop or firing off the next capture. If we get stuck waiting for
camerabin2 to become idle, this is a bug that needs fixing.
Use resource warning messages to notify camerabin2 that a capture
as aborted or couldn't be started, making it decrement the
processing counter and making the idle property more reliable.
Adds another test that checks that the idle property works
correctly when bogus start-capture calls are made.
This fails currently, but should remind us of fixing it in
the future by defining a proper error reporting from camera
sources to camerabin2
Adds gst-camerabin2-test example application, similar to
gst-camerabin-test for camerabin.
It is useful for taking pictures and recording videos using
camerabin2 and providing arguments for most of camerabin2
properties
--no-window flag is false by default and selection based on the option whether
to create XWindow is done before options are parsed. Therefore XWindow is never
created.
https://bugzilla.gnome.org/show_bug.cgi?id=641712
Don't set any default values for source element GstPhotography interface
settings, source elements should have sane defaults themselves.
Also, setting scene-mode is tricky as it is a superset of other GstPhotography
settings. This might cause problem with defaults e.g. setting scene-mode to
'night' may configure flash-mode as 'on' by definition, and after that
we don't want to override this flash-mode setting with gst-camerabin-test default
value. Moreover, user needs have an option to set scene mode first and then force
some individual setting to a different value from the scene-mode definition.
https://bugzilla.gnome.org/show_bug.cgi?id=639841
A camerabin2 tests depends on the commit
dcbba0932d for jpegenc on -good
that was released on 0.10.27.
This patch makes it check for this version before running the
test.
The unit tests are riddled with g_assert() and friends, make sure we
don't disable assert and cast checks for the unit tests even if
this has been specified for the rest of the code base, e.g. via
--disable-glib-asserts.
Just add rows via the combobox's model, which should work with
both gtk2 and gtk3, instead of using the gtk_combo_box_append_text()
convenience API (which was renamed to gtk_combo_box_text_append_text()).
Fixes compilation against gtk3 (there was a typo in the list store
variable name, spotted by Markus Vartiainen).
Increases timeout value so that tests won't fail with full
debug output.
Also removes buffer alloc from videotestsrc as this feature
isn't ready on camerabin2
Fixes capture location creation to use multifilesink location
like strings. E.g. using capture_%d instead of capture_0 to let
camerabin2 handle the %d replacing
Splits the bus handler into sync and async, keeping the
prepare-xwindow handling at the sync for faster handling and
moving the others to the async handler
Adds 'idle', a read-only boolean property that tells applications
if there is any capturing/saving/encoding going on in camerabin. If
not, it is safe to set it to NULL and release resources without
losing data.
Add "ready-for-capture" property to indicate if preparing a new
capture is possible.
"ready-for-capture" changes before the 'image-done' signal, so
the application can be notified that it can do a new capture
even before the previous one has finished encoding/saving.
Remove some stuff that was copy'n'pasted from core but
doesn't apply here. The following vars aren't set:
CHECK_CFLAGS, CHECK_LIBS, GST_OBJ_CFLAGS, GST_OBJ_LIBS,
so we may just as well remove them.
Garbage after frames is now included in the frames because flacparse
has no easy way to detect the real end of a frame. Decoders are
expected to everything after the frame because only decoding the
bitstream will reveal the real end of the frame.
Fixes bug #631814.
to find plugin directories for the various modules our unit tests depend
on in an uninstalled environment. This makes sure these plugins are found
even when distchecking (which happens from a subdirectory, which means
that the currently used trick to find the uninstalled directories of
these modules doesn't work in that case).
The tests were done in 2 steps, first there was a suite
that generated the files (while checking that camerabin
was operating correctly). Then there was a second suite
that was run to check that all files were playable with
playbin2. Those second tests were not being run because
they were checking if camerabin was initialized, and it
never was as those tests didn't use a 'setup' function.
This commit refactors the tests by removing this second
suite and merging its validation with the first suite's
functions.
When the test is run, the schema file won't be installed yet,
and there doesn't seem to be an environment variable to set
to force GSettings to look in a different directory.
https://bugzilla.gnome.org/show_bug.cgi?id=626603
This commit is out of sequence, it really belongs between commits
1509833141 (Automatic update of
common submodule) and dd26f378b0
(configure: Fix the CELT checks to ...)
Move include directives for gst-libs into GST_PLUGINS_BAD_CFLAGS,
and fix all the Makefiles that use it. This is so that all the
include directories are added in the proper order: first the
directories in srcdir/builddir, then gst-plugins-base dirs, then
gstreamer dirs. If the order is wrong, installed headers may be
used instead of local headers and/or uninstalled headers from -base.
Adds block-after-capture property to block running viewfinder after capturing.
This property is useful if application wants to display capture preview and avoid
running viewfinder on background.
Based on a patch by Tommi Myöhänen <ext-tommi.1.myohanen@nokia.com>
Adds a new property called viewfinder-filter to camerabin.
This property is used to add a filter to process the video
flow right before the viewfinder sink.
Also updates test to check property exists.
It's an external which lives in gstcheck.c. Redeclaring it makes some
compilers/architectures think the 'buffers' in the individual tests are
a different symbol... and therefore we end up comparing holodecks with
oranges.
Fixes build of faac due to functions not being static nor
having being declared in headers. (No previous prototype error)
Probably due to added -Wmissing-prototypes
Makes some improvements to tagschecking.c, making it use
fakesrc instead of videotestsrc and allowing to set input
caps so that more muxers can be used. Previously we could
only use those that accepted raw video caps.
Also adds some tests for geo-location tags
Adds a check unit test that aims to test tags serialization
and deserialization consistency (in muxers). It provides a
basic function that allows one to easily specify tags, a
muxer and a demuxer and a test will be done to check if
the tags have been consistently muxed and demuxed
Instead of hanging forever in a _get_state() in case an error occurs when
starting up camerabin, bail out and print an error message. Also remove
unnecessary _get_state() when shutting down the pipeline.
These elements are not fit for autoplugging, so demoting to RANK_NONE.
Also blacklisting for generic states test, since fixing these elements
up to do some minimal error handling seems to be a bit more work.
Partially fixes#591538.
camerabin test seems to time out with core git, so disabling because
chances are the problem is in the test and the core git stuff will
be released before we can fix the code in the test.
neonhttpsrc unit test is a bit flaky, it tends to fail the first
time when called (the host/url it checks for seems to be down as
well/anyway).
Remove some obsolete exmaples. Add video-width/height. Use proper api for
setting still image resolution. Fix stopping random tests on bin-state-changes.
Remove the memdup in snapshot again, as its not needed (pixbuf goes out of
scope with the buffer).
Only put primary language into GST_TAG_LANGUAGE, and convert to lower case,
ie. only use "en" of "en_GB". This is per our tag documentation and hence
what apps expect. Also add example to kateenc property description so people
know a language code is wanted here.
katedec: Kate decoder (text only)
kateenc: Kate encoder (text and DVD SPU only)
katetag: Kate tagger
kateparse: Kate parser
tiger: Kate renderer using the Tiger rendering library
Fixes#525743.
Connect to the pad-removed signal of the ptdemux elements so that we remove the
ghostpads for them. Fixes cleanup when going to NULL as well as when releasing
the sinkpads.
Fixes#561752
gst-camera is a gtk-test app to play with the imagecapture and videorecording.
gst-camera-perf is a tool to run various scenarios and take time meassurements
(e.g. shot-to-shot). Also sort the output files in configure.ac a bit to be
in alphabetical order.
Sprinkle more logging to make it easier to follow. Specify a low framerate and
capture resolution to avoid tests timing out. Make the sinks sync to test closer
to reality. Fix Makefile to use uninstalled interface.
* decouple image capturing from image post-processing and encoding
* post image-captured message after image is captured
* post preview-image message with snapshot of captured image
Create output caps from input caps, so we maintain any fields we
might get on the input caps, such as codec_data or rate and channels.
Set channels and rate on the output caps if we don't have input caps
or they don't contain such fields. We do this partly because we can,
but also because some muxers need this information. Tagreadbin will
also be happy about this.
Don't allow setting filename via img-done signal parameter but force app
use filename property. Don't stop capture when setting filename property.
Update check unit test based on the change.
First do not build the plugin, if we have none of the backend, as it won't work
then. Fix the miniobject_unref error in the test. Sprinkle a first handful of
debug logs into the element code.
The video was recorded for too long for the test timeouts. Also the verification
suite did not had custom timouts at all. Also split the verification for images
and video to get better reporting.
Use playbin2 for validation. Use tmp_dir for capturing. Wait with g_cond for
burst capture finish. Cleanup some g_object_set. Add some logging to ease
tracing.
Original commit message from CVS:
* tests/check/Makefile.am:
Dist test headers for amr and aac parsers.
Remove leftover lines mentioned speexresample tests.
Original commit message from CVS:
* gst/mxf/mxfaes-bwf.c: (mxf_bwf_handle_essence_element),
(mxf_aes3_handle_essence_element):
* gst/mxf/mxfalaw.c: (mxf_alaw_handle_essence_element):
* gst/mxf/mxfd10.c: (mxf_d10_picture_handle_essence_element),
(mxf_d10_sound_handle_essence_element):
* gst/mxf/mxfdemux.c: (gst_mxf_demux_pad_init),
(gst_mxf_demux_choose_package),
(gst_mxf_demux_handle_header_metadata_update_streams),
(gst_mxf_demux_pad_next_component),
(gst_mxf_demux_handle_generic_container_essence_element),
(gst_mxf_demux_parse_footer_metadata),
(gst_mxf_demux_handle_klv_packet), (gst_mxf_demux_src_query):
* gst/mxf/mxfdv-dif.c: (mxf_dv_dif_handle_essence_element):
* gst/mxf/mxfjpeg2000.c: (mxf_jpeg2000_handle_essence_element):
* gst/mxf/mxfmetadata.c: (mxf_metadata_sequence_init),
(mxf_metadata_structural_component_init),
(mxf_metadata_generic_picture_essence_descriptor_init):
* gst/mxf/mxfmpeg.c: (mxf_mpeg_video_handle_essence_element),
(mxf_mpeg_audio_handle_essence_element):
* gst/mxf/mxfparse.h:
* gst/mxf/mxfup.c: (mxf_up_handle_essence_element):
* gst/mxf/mxfvc3.c: (mxf_vc3_handle_essence_element):
* tests/check/elements/mxfdemux.c: (_sink_chain):
Implement support for OP2a/b/c and OP3a/b/c, i.e. tracks with
more than a single component. This currently only works for
the case where the components are stored in playback order
in the file.
Set some more default/distinguished values for the structural
metadata.
Make some types more strict by choosing the correct subclasses.
Set DISCONT flag on buffers after a component switch.
Take the last partition from the random index pack for the footer
partition of the header partition doesn't reference the footer
partition. This gives us the final structural metadata for
some more files in the beginning.
Original commit message from CVS:
* tests/check/elements/mxfdemux.c: (_sink_event):
* tests/check/elements/mxfdemux.h:
Make sure the main loop is already running when handling the EOS
event in pull mode. This works around a race condition that can
happen if the element goes into PLAYING, handles everything and
sends EOS before the main loop is started.
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/elements/mxfdemux.c: (_pad_added), (_sink_chain),
(_sink_event), (_create_sink_pad), (_create_src_pad_push),
(_src_getrange), (_src_query), (_create_src_pad_pull),
(GST_START_TEST), (mxfdemux_suite):
* tests/check/elements/mxfdemux.h:
Add push and pull mode unit test for mxfdemux.
Original commit message from CVS:
* tests/check/elements/speexresample.c: (test_pipeline):
Make unit test again faster to prevent timeouts with valgrind.
Original commit message from CVS:
* tests/check/elements/speexresample.c: (GST_START_TEST):
Make the unit test a bit faster to prevent timeouts, especially
with valgrind.
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/elements/aacparse.c:
* tests/check/elements/amrparse.c:
Add unit tests for new parsers.
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/elements/qtmux.c: (setup_src_pad),
(teardown_src_pad), (setup_qtmux), (cleanup_qtmux),
(check_qtmux_pad), (GST_START_TEST), (qtmux_suite), (main):
Add unit test for qtmux.
Original commit message from CVS:
* tests/check/elements/speexresample.c: (element_message_cb),
(eos_message_cb), (test_pipeline), (GST_START_TEST),
(speexresample_suite):
Add pipeline unit tests for testing all supported formats with
up/downsampling and different in/outrates.
* gst/speexresample/gstspeexresample.c:
(gst_speex_resample_push_drain), (gst_speex_resample_process):
* gst/speexresample/speex_resampler_wrapper.h:
Fix bugs identified by the testsuite.
Original commit message from CVS:
* gst/speexresample/gstspeexresample.c: (gst_speex_resample_start),
(gst_speex_resample_get_unit_size),
(gst_speex_resample_push_drain), (gst_speex_resample_event),
(gst_speex_resample_check_discont), (gst_speex_resample_process),
(gst_speex_resample_transform):
* gst/speexresample/gstspeexresample.h:
Rewrite timestamp tracking to make it more robust and guarantee
a continous stream.
* tests/check/Makefile.am:
* tests/check/elements/speexresample.c: (setup_speexresample),
(cleanup_speexresample), (fail_unless_perfect_stream),
(test_perfect_stream_instance), (GST_START_TEST),
(test_discont_stream_instance), (live_switch_alloc_only_48000),
(live_switch_get_sink_caps), (live_switch_push),
(speexresample_suite):
Add unit tests for speexresample based on the audioresample unit tests.
Original commit message from CVS:
* tests/check/pipelines/metadata.c:
Make the metadata test not fail when jpegenc isn't available....
as it isn't here, because it's not in this module, and
therefore not in the plugin path when the check runs.
Original commit message from CVS:
* configure.ac
* ext/metadata/README:
* ext/metadata/metadataexif.c:
* ext/metadata/metadatatags.c:
* ext/metadata/metadatatags.h:
Start using core geo tags (bump req). Fix handling of location
references.
* tests/check/Makefile.am:
Sort blacklisted elements and remove moved ones. Add new test.
* tests/check/pipelines/metadata.c:
Add first tests for metadata element.
* tests/icles/metadata_editor.c:
Move free to correct place.
Original commit message from CVS:
* tests/check/generic/states.c:
Stop test on state-change error. Should be applied on other modules if
we agree that it makes sense.
Original commit message from CVS:
* tests/check/elements/audioresample.c: (setup_audioresample),
(fail_unless_perfect_stream), (test_perfect_stream_instance),
(test_discont_stream_instance):
Now that GstBaseTransform is 'fixed' ... remove cruft from tests.
Add debugging for coherence.
Original commit message from CVS:
* docs/plugins/Makefile.am:
* docs/plugins/gst-plugins-bad-plugins-docs.sgml:
* docs/plugins/gst-plugins-bad-plugins-sections.txt:
* ext/x264/gstx264enc.c:
* tests/check/Makefile.am:
* tests/check/elements/x264enc.c: (setup_x264enc),
(cleanup_x264enc), (GST_START_TEST), (x264enc_suite), (main):
Add documentation and unit test for x264enc.
Original commit message from CVS:
* gst/selector/gstoutputselector.c:
* tests/icles/output-selector-test.c:
Use BOILERPLATE macro and update test to the latest api changes.
Original commit message from CVS:
* gst/interleave/interleave.c: (gst_interleave_pad_get_type),
(gst_interleave_finalize), (gst_audio_check_channel_positions),
(gst_interleave_set_channel_positions),
(gst_interleave_class_init), (gst_interleave_init),
(gst_interleave_set_property), (gst_interleave_get_property),
(gst_interleave_request_new_pad), (gst_interleave_release_pad),
(gst_interleave_sink_setcaps), (gst_interleave_src_query_duration),
(gst_interleave_src_query_latency), (gst_interleave_collected):
* gst/interleave/interleave.h:
Allow setting channel positions via a property and allow using the
channel positions on the input as the channel positions of the output.
Fix some broken logic and memory leaks.
* tests/check/Makefile.am:
* tests/check/elements/interleave.c: (src_handoff_float32),
(sink_handoff_float32), (GST_START_TEST), (interleave_suite):
Add unit tests for checking correct handling of channel positions.
Original commit message from CVS:
* gst/interleave/deinterleave.c:
Add another example launch line.
* gst/interleave/interleave.c: (interleave_24),
(gst_interleave_finalize), (gst_interleave_base_init),
(gst_interleave_class_init), (gst_interleave_init),
(gst_interleave_request_new_pad), (gst_interleave_release_pad),
(gst_interleave_change_state), (__remove_channels),
(__set_channels), (gst_interleave_sink_getcaps),
(gst_interleave_set_process_function),
(gst_interleave_sink_setcaps), (gst_interleave_sink_event),
(gst_interleave_src_query_duration), (gst_interleave_src_query),
(forward_event_func), (forward_event), (gst_interleave_src_event),
(gst_interleave_collected):
* gst/interleave/interleave.h:
Major rewrite of interleave using GstCollectpads. This new version
also supports almost all raw audio formats and has better caps
negotiation. Fixes bug #506594.
Also update docs and add some more examples.
* tests/check/elements/interleave.c: (interleave_chain_func),
(GST_START_TEST), (src_handoff_float32), (sink_handoff_float32),
(interleave_suite):
Add some more extensive unit tests for interleave.
Original commit message from CVS:
* tests/icles/.cvsignore:
* tests/icles/Makefile.am:
* tests/icles/test-oss4.c: (opt_show_mixer_messages), (WAIT_TIME),
(show_mixer_messages), (probe_mixer_tracks), (probe_pad),
(probe_details), (probe_element), (main):
Small oss4 test that probes for available devices and retrieves
their caps and mixer tracks and all that. Also allows testing of
mixer change messages on the bus.
Original commit message from CVS:
* tests/check/elements/deinterleave.c: (GST_START_TEST):
Set keep-positions property to TRUE for the 8 channel test to ensure
that the original channel position is set on the output.
Original commit message from CVS:
* gst/interleave/Makefile.am:
* gst/interleave/deinterleave.c: (deinterleave_24),
(gst_deinterleave_finalize), (gst_deinterleave_base_init),
(gst_deinterleave_class_init), (gst_deinterleave_init),
(gst_deinterleave_add_new_pads), (gst_deinterleave_set_pads_caps),
(gst_deinterleave_set_process_function),
(gst_deinterleave_sink_setcaps), (__remove_channels),
(__set_channels), (gst_deinterleave_getcaps),
(gst_deinterleave_process), (gst_deinterleave_chain),
(gst_deinterleave_sink_activate_push):
* gst/interleave/deinterleave.h:
Add support for all raw audio formats and provide better negotiation
if the caps are changing.
Don't allow changes of the channel positions and set the position of
the corresponding channel on the src pad caps.
General cleanup and smaller bugfixes.
* tests/check/elements/deinterleave.c: (float_buffer_check_probe):
Check the channel positions on the output buffer caps.
Original commit message from CVS:
* tests/check/Makefile.am:
Remove deinterleave test from VALGRIND_TO_FIX again now that
there are suppressions in gst.supp which make this work for me.
Original commit message from CVS:
* tests/check/Makefile.am:
Add deinterleave unit test to VALGRIND_TO_FIX, since it causes
weird invalid free errors in valgrind/libc after _exit for some
reason.
* tests/check/elements/deinterleave.c: (pads_created),
(set_channel_positions), (src_handoff_float32_8ch),
(float_buffer_check_probe),
(pad_added_setup_data_check_float32_8ch_cb),
(make_fake_src_8chans_float32), (GST_START_TEST),
(deinterleave_suite):
Add some more deinterleave unit test bits I had locally.
Original commit message from CVS:
* gst/interleave/Makefile.am:
* gst/interleave/deinterleave.h:
* gst/interleave/interleave.h:
* gst/interleave/plugin.h:
Split definitions into separate header files for better documentation
generation.
* gst/interleave/deinterleave.c: (gst_deinterleave_base_init),
(gst_deinterleave_class_init), (gst_deinterleave_sink_setcaps),
(gst_deinterleave_process):
Don't use alloca, allow caps changes as long as the number of channels
does not change, don't use g_warning, return NOT_NEGOTIATED as early
as possible and some other cleanup.
* gst/interleave/interleave.c: (gst_interleave_base_init),
(gst_interleave_class_init):
Do some random cleanup.
* tests/check/Makefile.am:
* tests/check/elements/deinterleave.c: (GST_START_TEST),
(deinterleave_chain_func), (deinterleave_pad_added),
(deinterleave_suite):
Add unit tests for the deinterleave element.
Original commit message from CVS:
Patch by: Sjoerd Simons <sjoerd at luon dot net>
* tests/check/elements/audioresample.c:
(live_switch_alloc_only_48000), (live_switch_get_sink_caps),
(live_switch_push), (GST_START_TEST):
Add unit test for the latest basetransform negotiation changes.
See bug #526768.
Original commit message from CVS:
Patch by: Sjoerd Simons <sjoerd at luon dot net>
* gst/audioresample/gstaudioresample.c: (gst_audioresample_init):
Let audioresample use the buffer allocation of basetransform instead
of it's own stuff.
* tests/check/elements/audioresample.c: (alloc_only_48000),
(GST_START_TEST), (audioresample_suite):
Add unit test for the recent basetransform bugfix, where upstream
changes caps to something that can't be passed through anymore.
Original commit message from CVS:
* tests/check/Makefile.am:
Don't inlcude dc1394src in the generic/states test as it requires
special hardware. Fixes bug #528011.
Original commit message from CVS:
* tests/check/elements/ofa.c: (bus_handler), (GST_START_TEST):
Only check if the generated fingerprints are valid Base64. The
fingerprints are different when running on different architectures
which is a) no problem because the fingerprints are tolerant enough
and b) is caused by libofa. Fixes bug #528266.
Original commit message from CVS:
* tests/icles/metadata_editor.c: (ENC_UNKNOWN), (last_pixbuf),
(draw_pixbuf), (change_tag_list), (update_draw_pixbuf),
(ui_drawing_size_allocate_cb), (on_drawingMain_expose_event),
(on_buttonSaveFile_clicked), (ui_create), (me_gst_bus_callback_view),
(me_gst_setup_view_pipeline), (process_file):
* tests/icles/metadata_editor.glade:
Remove GstXOverlay stuff and use gdkpixbufsink plus some rather crude
drawing/scaling logic to make this compile and work on all platforms.
Fixes#518227.
Original commit message from CVS:
* tests/check/elements/souphttpsrc.c: (got_buffer),
(souphttpsrc_suite):
Increase the timeout for the internet tests to 250 seconds
and check for NULL caps instead of just crashing.
The real fix would be to implement an shoutcast server for the unit test
instead of relying on a working internet connection.
Fixes bug #521749.
Original commit message from CVS:
* tests/check/elements/ofa.c: (GST_START_TEST):
Also check that we have processed at least 135 seconds of audio
until we stop and calculated a fingerprint.
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/ofa.c: (bus_handler), (GST_START_TEST),
(ofa_suite), (main):
Add simple unit tests for the OFA plugin.
Original commit message from CVS:
* ext/soup/gstsouphttpsrc.c: (gst_soup_http_src_got_headers_cb),
(gst_soup_http_src_chunk_allocator),
(gst_soup_http_src_got_chunk_cb),
(gst_soup_http_src_uri_get_protocols):
Don't autoplug souphttpsrc for dav/davs. This is better handled by
GIO and GnomeVFS as they provide authentication.
Don't leak the icy caps if we already set them and get a new
icy-metaint header.
Try harder to set the icy caps on the output buffer to have correct
caps for the first buffer already.
* tests/check/elements/souphttpsrc.c: (got_buffer),
(GST_START_TEST):
Check that we get a buffer with application/x-icy caps if iradio-mode
is enabled and we have an icecast URL.
Original commit message from CVS:
* configure.ac:
Check if the compiler supports do { } while (0) macros. This fixes
a warning when compiling with g++ 4.3, resulting in a build failure
because of -Werror.
* ext/mpeg2enc/gstmpeg2encpicturereader.cc:
* ext/mplex/gstmplex.cc:
Include <string.h> for memcpy and friends to fix the build with
gcc 4.3.
* tests/check/Makefile.am:
Remove trailing backslash.
Original commit message from CVS:
* gst/selector/gstinputselector.c: (gst_selector_pad_class_init),
(gst_selector_pad_finalize), (gst_selector_pad_get_property),
(gst_selector_pad_event), (gst_input_selector_class_init),
(gst_input_selector_init), (gst_input_selector_set_active_pad),
(gst_input_selector_set_property),
(gst_input_selector_get_property),
(gst_input_selector_request_new_pad),
(gst_input_selector_release_pad),
(gst_input_selector_push_pending_stop),
(gst_input_selector_switch):
* gst/selector/gstinputselector.h:
Various cleanups.
Added tags to the pads.
Select active pad based on the pad object instead of its name.
Fix refcount in set_active_pad.
Add property to get the number of pads.
* gst/selector/gstoutputselector.c:
(gst_output_selector_class_init),
(gst_output_selector_set_property),
(gst_output_selector_get_property):
Various cleanups.
Select the active pad based on the pad object instead of its name.
Fix locking when setting the active pad.
* gst/selector/gstselector-marshal.list:
* tests/check/elements/selector.c: (cleanup_pad),
(selector_set_active_pad), (run_input_selector_buffer_count):
Fixes for pad instead of padname for pad selection.
Original commit message from CVS:
Map Date-Time and GPS tags and Convert from EXIF to XMP Datatime as local time (those changes has been done in previous comit but had to be revert in 2008-02-10 due to frozen)
Original commit message from CVS:
Patch by: Wouter Cloetens <wouter at mind dot be>
* ext/soup/gstsouphttpsrc.c: (gst_soup_http_src_class_init),
(gst_soup_http_src_init), (gst_soup_http_src_dispose),
(gst_soup_http_src_set_property), (gst_soup_http_src_get_property),
(gst_soup_http_src_create):
* ext/soup/gstsouphttpsrc.h:
* tests/check/elements/souphttpsrc.c: (run_test), (GST_START_TEST),
(souphttpsrc_suite):
Add support for specifying a list of cookies to be passed in
the HTTP request. Fixes bug #518722.
Original commit message from CVS:
* gst/selector/gstinputselector.c:
* gst/selector/gstinputselector.h:
Added "select-all" property to make it work like aggregator in 0.8.
* gst/selector/gstoutputselector.c:
Fix resend-latest behavoiur.
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/selector.c:
Add unit tests for selector.
Original commit message from CVS:
* tests/check/gst-plugins-bad.supp:
Add suppressions for SoundTouch valgrind warnings and
a valgrind warning caused by the LADSPA sine plugin and
happening on every exit().
Remove GIO suppressions as it's now in -base.
Original commit message from CVS:
* tests/check/Makefile.am:
Ignore some more elements for the states unit test, like
dfbvideosink which produces a segfault. Fixes bug #517854.
