This exposes a new property, mtu, which is used to determine the
initial size of buffers from the buffer pool. If received data
exceeds this, the element gracefully handles that in a manner similar
to what we had previously: a large memory gets filled and reallocated
at the next call to "fill".
The default size is set to 1500, which should cover most use cases.
With contributions from Mathieu Duponchelle <mathieu@centricular.com>
https://bugzilla.gnome.org/show_bug.cgi?id=772841
Optimize GstUdpSrc for cache performance.
Move the hot properties, which are used by the read function, to the top:
@used_socket, @addr, @cancellable, @skip_first_bytes, @timeout,
@retrieve_sender_address.
Remove the unused property @ttl.
Where needed reorder so that holes are avoided (the 64-bit @timeout)
https://bugzilla.gnome.org/show_bug.cgi?id=772841
This allows disabling of sender address retrieval, which might
be useful in certain scenarios, like when the socket is connected,
or the sender address is not of interest (e.g. when receiving an
MPEG-TS stream). Disabling sender address retrieval in those
cases can have minor performance advantages.
https://bugzilla.gnome.org/show_bug.cgi?id=563323
On POSIX, IP_MULTICAST_LOOP is a setting for the sender socket. On Windows it
is a setting for the receiver socket. As such we will need it on udpsrc too to
allow filtering out our own multicast packets.
Otherwise we constantly create/close event file descriptors,
every single time we call g_socket_condition_timed_wait() or
g_socket_receive_message(), i.e. twice per packet received!
This was not particularly good for performance.
Also only create GCancellable on start-up.
On Windows it's not possible to bind to a multicast address
but the OS will make sure to filter out all packets that
arrive not for the multicast address the socket joined.
On Linux and others it is necessary to bind to a multicast
address to let the OS filter out all packets that are received
on the same port but for different addresses than the multicast
address
And deprecate the multicast-group property and replace it with the
address property.
https://bugzilla.gnome.org/show_bug.cgi?id=707042
Add network interface selection when joining multicast groups.
Useful when using the udpsrc on multihomed hosts.
Fixes#575234.
API: GstUDPSrc::multicast-iface
Original commit message from CVS:
* gst/udp/gstudpsrc.c: (gst_udpsrc_class_init), (gst_udpsrc_init),
(gst_udpsrc_create), (gst_udpsrc_set_property),
(gst_udpsrc_get_property), (gst_udpsrc_start), (gst_udpsrc_stop):
* gst/udp/gstudpsrc.h:
Add property to control automatic join/leave of multicast groups.
Add G_LIKELY.
Remove setting caps on buffers explicitly, basesrc does that for us now.
Improve debug info.
Convert some non-fatal error into warnings.
Use g_ntohs for better portability.
Leave multicast groups when stopping.
When using external sockets, use getsockname() on them to fill up the
addr structure before calling methods that use the structure.
Should all fix#536903.
API: GstUDPSrc::auto-multicast property
Original commit message from CVS:
Patch by: Bruno Santos <brunof at ua dot pt>
* gst/udp/gstudpnetutils.c: (gst_udp_get_addr),
(gst_udp_join_group), (gst_udp_leave_group),
(gst_udp_is_multicast):
* gst/udp/gstudpnetutils.h:
Provide a bunch of helper methods to deal with IPv4 and IPv6
transparently.
* gst/udp/gstmultiudpsink.c: (gst_multiudpsink_class_init),
(gst_multiudpsink_init), (gst_multiudpsink_set_property),
(gst_multiudpsink_get_property), (join_multicast),
(gst_multiudpsink_init_send), (gst_multiudpsink_add_internal),
(gst_multiudpsink_remove):
* gst/udp/gstmultiudpsink.h:
Add multicast TTL and loopback properties.
Use the helper methods to implement ip4 and ip6.
* gst/udp/gstudpsrc.c: (gst_udpsrc_create), (gst_udpsrc_start):
* gst/udp/gstudpsrc.h:
Use the helper methods to implement ip4 and ip6.
Fixes#515962.
Original commit message from CVS:
Patch by: Peter Kjellerstedt <pkj at axis com>
* gst/udp/gstudpsrc.c: (gst_udpsrc_init), (gst_udpsrc_create),
(gst_udpsrc_get_property), (gst_udpsrc_start), (gst_udpsrc_unlock),
(gst_udpsrc_unlock_stop), (gst_udpsrc_stop):
* gst/udp/gstudpsrc.h:
Port to GstPoll. See #505417.
Original commit message from CVS:
Patch by: Laurent Glayal <spglegle at yahoo dot fr>
* gst/udp/gstdynudpsink.c: (gst_dynudpsink_class_init),
(gst_dynudpsink_init), (gst_dynudpsink_set_property),
(gst_dynudpsink_get_property), (gst_dynudpsink_init_send),
(gst_dynudpsink_close):
* gst/udp/gstdynudpsink.h:
* gst/udp/gstudpsrc.c: (gst_udpsrc_class_init), (gst_udpsrc_init),
(gst_udpsrc_create), (gst_udpsrc_set_property),
(gst_udpsrc_get_property), (gst_udpsrc_start), (gst_udpsrc_stop):
* gst/udp/gstudpsrc.h:
Rework the socket allocation a bit based on the sockfd argument so that
it becomes usable.
Add a closefd property to instruct the udp elements to close the custom
file descriptors when going to READY. Fixes#423304.
API:GstUDPSrc::closefd property
API:GstDynUDPSink::closefd property
Original commit message from CVS:
* gst/udp/gstudpsrc.c: (gst_udpsrc_class_init), (gst_udpsrc_init),
(gst_udpsrc_create), (gst_udpsrc_set_property),
(gst_udpsrc_get_property), (gst_udpsrc_unlock), (gst_udpsrc_stop):
* gst/udp/gstudpsrc.h:
Added property to post a message on timeout.
Updated docs.
When restarting the select, initialize the fdsets again.
Init control sockets so we don't accidentally close a random socket.
API: GstUDPSrc::timeout property
Original commit message from CVS:
* gst/udp/gstudpsrc.c: (gst_udpsrc_class_init), (gst_udpsrc_init),
(gst_udpsrc_set_property), (gst_udpsrc_get_property),
(gst_udpsrc_start):
* gst/udp/gstudpsrc.h:
Rename "buffer" to "buffer-size" to make clear it is a size we set and
not some sort of feature we enable.
Original commit message from CVS:
* ext/amrnb/amrnbdec.c:
* ext/amrnb/amrnbenc.c: (gst_amrnbenc_setcaps):
* ext/amrnb/amrnbparse.c:
Update caps with audio/AMR.
* gst/rtp/gstrtpamrdec.c: (gst_rtpamrdec_init),
(gst_rtpamrdec_sink_setcaps), (gst_rtpamrdec_chain),
(gst_rtpamrdec_change_state):
* gst/rtp/gstrtpamrdec.h:
* gst/rtp/gstrtpamrenc.c: (gst_rtpamrenc_class_init),
(gst_rtpamrenc_init), (gst_rtpamrenc_chain):
Dont set FT headers twice, it was already in the encoded
bitstream.
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_send), (gst_rtspsrc_open),
(gst_rtspsrc_close), (gst_rtspsrc_play):
* gst/rtsp/rtspconnection.c: (parse_line):
Cleanups
* gst/udp/gstudpsrc.c: (gst_udpsrc_class_init),
(gst_udpsrc_create), (gst_udpsrc_set_property),
(gst_udpsrc_get_property):
* gst/udp/gstudpsrc.h:
Added caps property, we need this soon to type the buffers.
Original commit message from CVS:
* gst/udp/gstudpsrc.c: (gst_udpsrc_init), (gst_udpsrc_get):
* gst/udp/gstudpsrc.h:
Don't call gst_pad_push in a get function. Fixes#150449
Original commit message from CVS:
Remove all config.h includes from header files, add it to each source file and remove duplicate config.h includes from several source files
Original commit message from CVS:
(1) Caps nego are now dynamic, the Application developer now have choices: udp, tcp & none.
(2) Broadcast flag set to true on all the udp sockets.
