gstharness.c: Use G_GSIZE_FORMAT instead of hard-coding %zu
error: unknown conversion type character 'z' in format [-Werror=format]
gst-inspect.c: GPid is void* on non-UNIX, and we only use it on UNIX
error: initialization makes pointer from integer without a cast [-Werror]
gstmeta.c: Use and then discard value
error: value computed is not used [-Werror=unused-value]
With this, gstreamer builds with -Werror on MinGW
This adds two custom gdb commands:
'gst-dot' creates dot files that a very close to what
GST_DEBUG_BIN_TO_DOT_FILE() produces. Object properties and buffer content
(e.g. codec-data in caps) are not available.
'gst-print' produces high-level information about GStreamer objects. This
is currently limited to pads for GstElements and events for the pads. The
output can look like this:
(gdb) gst-print pad.object.parent
GstMatroskaDemux (matroskademux0) {
SinkPad (sink, pull) {
}
SrcPad (video_0, push) {
events:
stream-start:
stream-id: 0463ccb080d00b8689bf569a435c4ff84f9ff753545318ae2328ea0763fd0bec/001:1274058367
caps: video/x-theora
width: 1920
height: 800
pixel-aspect-ratio: 1/1
framerate: 24/1
streamheader: < 0x5555557c7d30 [GstBuffer], 0x5555557c7e40 [GstBuffer], 0x7fffe00141d0 [GstBuffer] >
segment: time
rate: 1
tag: global
container-format: Matroska
}
SrcPad (audio_0, push) {
events:
stream-start:
stream-id: 0463ccb080d00b8689bf569a435c4ff84f9ff753545318ae2328ea0763fd0bec/002:1551204875
caps: audio/mpeg
mpegversion: 4
framed: true
stream-format: raw
codec_data: 0x7fffe0014500 [GstBuffer]
level: 2
base-profile: lc
profile: lc
channels: 2
rate: 44100
segment: time
rate: 1
tag: global
container-format: Matroska
tag: stream
audio-codec: MPEG-4 AAC audio
language-code: en
}
}
Fixes flaky appsrc unit test where depending on scheduling
the submitted list might not be writable if submitted via
an action signal from the application thread.
Fixes gst-plugins-base#522
baseparse internally uses a 64kb buffer for pulling data from upstream.
If a 64kb pull is failing with a short read, it would previously pull
again the requested size.
Doing so is not only inefficient but also seems to cause problems with
some elements (rawvideoparse) where the second pull would fail with EOS.
Short reads are only allowed in GStreamer at EOS.
Closes https://gitlab.freedesktop.org/gstreamer/gstreamer/issues/294
Without this bindings get confused about the meaning of references, and
we really own these references if they are not already owned by
something else.
We won't be able to do ASSERT_CRITICAL, but the main body of the tests
are still valid, and given we ship GStreamer with this configuration, it
is important to be able to run some tests against it.
This adds gdb pretty printer for some GStreamer types.
For GstObject pointers the type and name is added, e.g.
"0x5555557e4110 [GstDecodeBin|decodebin0]".
For GstMiniObject pointers the object type is added, e.g.
"0x7fffe001fc50 [GstBuffer]".
For GstClockTime and GstClockTimeDiff the time is also printed in human
readable form, e.g. "150116219955 [+0:02:30.116219955]".
Fixes#320
By moving the functionality down to the testclock, the implementation
no longer needs to poll the waits, but rather wait properly for
them to be added.
The performance-hit here would be that by polling the test-clock
regularly, you would create contention on the testclock-lock, making code
using the testclock (gst_clock_id_wait) fighting for the lock.
Previously, with opportunistic sync we'd track a master
clock as soon as we see a SYNC message, and hence sync up
faster, but then we'd announce we're synched before seeing
the ANNOUNCE, leaving the clock details like grandmaster-clock
empty.
A better way is to start tracking the clock opportunistically,
but not announce we're synched until we've also seen the ANNOUNCE.
The follow-up and delay-resp messages carry precise
timestamps for the arrival at the clock master, but
the local return time is unimportant, so we should be very
lenient in accepting them late. Some PTP masters don't
prioritise sending those packets, and we reject all the
responses and never sync - or take forever to do so.
Increase the tolerance to 20x the mean path delay.
Also fix a typo in one debug output that would print
the absolute time of the delay-resp message, not the offset
from the delay-req that it's actually being compared against.
gst_queue_array_clear will clear the GstQueueArray,
gst_queue_array_set_clear_func will set a clear function for each
element to be called on _clear and on _free.
https://bugzilla.gnome.org/show_bug.cgi?id=797218
This is exposed as a solution to the use case of plugging in
sources with a higher latency after the aggregator has started
playing with an initial set of sources, allowing to avoid resyncing.
https://bugzilla.gnome.org/show_bug.cgi?id=797213
Otherwise we try to build a shared lib when we build the rest
of GStreamer statically, which won't work because we pass
-DGST_STATIC_COMPILATION when building statically, which means
we won't dllimport public symbols from our libs which means
that on Windows the unit tests will fail to link to libgstcheck.
https://bugzilla.gnome.org/show_bug.cgi?id=797185
Add new GST_API_EXPORT in config.h and use that for GST_*_API
decorators instead of GST_EXPORT.
The right export define depends on the toolchain and whether
we're using -fvisibility=hidden or not, so it's better to set it
to the right thing directly than hard-coding a compiler whitelist
in the public header.
We put the export define into config.h instead of passing it via the
command line to the compiler because it might contain spaces and brackets
and in the autotools scenario we'd have to pass that through multiple
layers of plumbing and Makefile/shell escaping and we're just not going
to be *that* lucky.
The export define is only used if we're compiling our lib, not by external
users of the lib headers, so it's not a problem to put it into config.h
Also, this means all .c files of libs need to include config.h
to get the export marker defined, so fix up a few that didn't
include config.h.
This commit depends on a common submodule commit that makes gst-glib-gen.mak
add an #include "config.h" to generated enum/marshal .c files for the
autotools build.
https://bugzilla.gnome.org/show_bug.cgi?id=797185
For each lib we build export its own API in headers when we're
building it, otherwise import the API from the headers.
This fixes linker warnings on Windows when building with MSVC.
The problem was that we had defined all GST_*_API decorators
unconditionally to GST_EXPORT. This was intentional and only
supposed to be temporary, but caused linker warnings because
we tell the linker that we want to export all symbols even
those from externall DLLs, and when the linker notices that
they were in external DLLS and not present locally it warns.
What we need to do when building each library is: export
the library's own symbols and import all other symbols. To
this end we define e.g. BUILDING_GST_FOO and then we define
the GST_FOO_API decorator either to export or to import
symbols depending on whether BUILDING_GST_FOO is set or not.
That way external users of each library API automatically
get the import.
https://bugzilla.gnome.org/show_bug.cgi?id=797185
Fixes a configure error with gst-build:
subprojects/gst-plugins-base/meson.build:235:2: ERROR: Fetched variable 'gst_check_dep' in the subproject 'gstreamer' is not a dependency object.
The avg_bitrate is an unsigned int, so the gst_util_uin64_scale() function can't
be used for it, as it expects signed integers for the fraction parts arguments.
https://bugzilla.gnome.org/show_bug.cgi?id=797054
Make our own deprecation marker for libgstcheck,
since the function declaration must contain the
right API export decorator (GST_CHECK_API) and
not the one for GStreamer core.
Don't return a value from a function that doesn't
return a value using the returned value from a
function that also doesn't return a value.
gstbitwriter.h(265): warning C4098: 'gst_bit_writer_align_bytes_unchecked': 'void' function returning a value
Instead, use -fvisibility=hidden and explicit exports via GST_EXPORT.
This should result in consistent behaviour for the autotools and
Meson builds where this is done already, and will allow us to drop
the win32 .def files.
And make use of it in the typefind element. It's useful to distinguish
between the different errors why typefinding can fail, and especially to
not consider GST_FLOW_FLUSHING as an actual error.
https://bugzilla.gnome.org/show_bug.cgi?id=796894
And make use of that in the typefind element to also be able to make use
of the extension in push mode. It previously only did that in pull mode
and this potentially speeds up typefinding and might also prevent false
positives.
https://bugzilla.gnome.org/show_bug.cgi?id=796865
gst_base_transform_transform_caps can return NULL in various conditions
thus we should not treat its result as valid caps.
In all other places NULL is properly handled.
The processing deadline is the acceptable amount of time to process the media
in a live pipeline before it reaches the sink. This is on top of the algorithmic
latency that is normally reported by the latency query. This should make
pipelines such as "v4lsrc ! xvimagesink" not claim that all frames are late
in the QoS events. Ideally, this should replace max_lateness for most applications.
https://bugzilla.gnome.org/show_bug.cgi?id=640610
We need all relevant events of a segment to have consistent seqnum:
* GST_EVENT_SEGMENT
* GST_EVENT_EOS
If we are push-based and create a new segment, use the same seqnum
as the upstream event.
If we are pull-based, use the seqnum of that newly created segment
event everywhere
strncpy() is assumed to be for strings so the compiler assumes that
it will need an extra byte for the string-terminaning NULL.
For cases where we know it's actually "binary" data, just copy it
with memcpy.
https://bugzilla.gnome.org/show_bug.cgi?id=795756
GstBitWriter provides a bit writer that can write any number of
bits into a memory buffer. It provides functions for writing any
number of bits into 8, 16, 32 and 64 bit variables.
https://bugzilla.gnome.org/show_bug.cgi?id=707543
Meson supports building both static and shared libraries in a single
library() call. It has the advantage of reusing the same .o objects and
thus avoid double compilation.
https://bugzilla.gnome.org/show_bug.cgi?id=794627
And make the drop() functions expect a 0-based index too,
this addresses a longstanding FIXME. This will not break
backward compatibility, because the drop() functions
were previously only meant to be used with the index
returned by find().
https://bugzilla.gnome.org/show_bug.cgi?id=795156
We need different export decorators for the different libs.
For now no actual change though, just rename before the release,
and add prelude headers to define the new decorator to GST_EXPORT.
We need different export decorators for the different libs.
For now no actual change though, just rename before the release,
and add prelude headers to define the new decorator to GST_EXPORT.
We need different export decorators for the different libs.
For now no actual change though, just rename before the release,
and add prelude headers to define the new decorator to GST_EXPORT.
We need different export decorators for the different libs.
For now no actual change though, just rename before the release,
and add prelude headers to define the new decorator to GST_EXPORT.
Otherwise it's possible that we won't be able to start again
depending the implementation. We do start/stop in normal use cases
whenever GST_QUERY_SCHEDULING happens before we are started.
https://bugzilla.gnome.org/show_bug.cgi?id=794149
The flushing state is handled a bit differently, there is no need
to stop flushing in start_complete. This would other result in
unlock_stop being called without unlock_start.
Unlike what the old comment says, there is no need to take the live
lock here, we are still single threaded at this point (app thread
or the state change thread). Also, we will wait for playing state
in create/getrange, no need to do that twice.
https://bugzilla.gnome.org/show_bug.cgi?id=794149
The queue gets filled by the tail, so a query will always be the tail
object, not the head object. Also add a _peek_tail_struct() method to the
GstQueueArray to enable looking at the tail.
With unit test to prevent future regression.
https://bugzilla.gnome.org/show_bug.cgi?id=762875
Position queries with GST_FORMAT_TIME are supposed to return stream
time.
gst_base_sink_get_position() estimates the current stream time on its
own instead of using gst_segment_to_stream_time(), but the algorithm
used was not taking segment.offset into account, resulting in invalid
values when this field was set to a non-zero value.
https://bugzilla.gnome.org/show_bug.cgi?id=792434
As we do that for serialized events as well, and the subclass will
most likely need to access pad->segment to make its decisions,
doing that from the sinkpad's streaming threads was racy.
Sub-class may want to decide to go passthrough/in-place by inspecting
the support meta APIs. This patch duplicates the check for this mode,
so we still don't do uneeded allocation query while we allow sub-classes
to switch the behaviour during it's own decide_allocation call.
Notice that such sub-class need to reset the class to non-passthrough in
set_caps() in order for decide_allocation to be called again. This is
needed otherwise we'd be doing an allocation query in element in which
it make no sense (notably capsfilter).
https://bugzilla.gnome.org/show_bug.cgi?id=791453
Add a gst_base_src_submit_buffer_list() function that allows subclasses
to produce a bufferlist containing multiple buffers in the ::create()
function. The buffers in the buffer list will then also be pushed out
in one go as a GstBufferList. This can reduce push overhead
significantly for sources with packetised inputs (such as udpsrc)
in high-throughput scenarios.
The _submit_buffer_list() approach was chosen because it is fairly
straight-forward, backwards-compatible, bindings-friendly (as opposed
to e.g. making the create function return a mini object instead),
and it allows the subclass maximum control: the subclass can decide
dynamically at runtime whether to return a list or a single buffer
(which would be messier if we added a create_list virtual method).
https://bugzilla.gnome.org/show_bug.cgi?id=750241
Convenience function to just grab all pending data
from the harness, e.g. if we just want to check if
it matches what we expect and we don't care about
the chunking or buffer metadata.
Based on patch by: Havard Graff <havard.graff@gmail.com>
If we're adding to the tail of the queue, it's because we're converting
a gap event, so don't block there it means we're calling from the output
thread.
https://bugzilla.gnome.org/show_bug.cgi?id=784911
Add a comment for when the state matters. Use a local var for priv in
update_time_level() to improve readability. Move the our_latency local
var below the query results checks.
We want to skip serialization for FLUSH_STOP events (apparently). We can
simplify the code to add it to the top-level conditions. There was nothing
done in the first code path if the event was FLUSH_STOP.
Just queue it like any other serialized event. This way we don't need to
check if there still are buffers in the queue.
Validated with the tests and gst-launch-1.0 pipelines.
Don't copy the whole event struct. Set the input params when we call the
forwarding helper. Initialize the internal fields and return values in the
helper.
Otherwise check_events() will not remove the GAP event (as the queue
tail is not the event anymore but the GAP buffer), then the GAP buffer
is handled, then the GAP event is handled again, ... forever.
This ensures that they really get processed in order with
buffers. Just waiting for the queue to be empty is sometimes not
enough as the buffers are dropped from the pad before the result is
pushed to the next element, sometimes resulting in surprising
re-ordering.
In the case an aggregator is created and pads are requested but only
linked later, we end up never updating the upstream latency.
This was because latency queries on pads that are not linked succeed,
so we never did a new query once a live source has been linked, so the
thread was never started.
https://bugzilla.gnome.org/show_bug.cgi?id=757548
The function needs to be unlocked if any data is received, but only
end the first buffer processing on an actual buffer, synchronized events
don't matter on the first buffer processing.
https://bugzilla.gnome.org/show_bug.cgi?id=781673
Allowing us to tell GstPad why we are failing an event, which might
be because we are 'flushing' even if the sinkpad is not in flush state
at that point.
Until now we would start the task when the pad is activated. Part of the
activiation concist of testing if the pipeline is live or not.
Unfortunatly, this is often too soon, as it's likely that the pad get
activated before it is fully linked in dynamic pipeline.
Instead, start the task when the first serialized event arrive. This is
a safe moment as we know that the upstream chain is complete and just
like the pad activation, the pads are locked, hence cannot change.
https://bugzilla.gnome.org/show_bug.cgi?id=757548
This fixes a race where we check if there is a clock, then it get
removed and we endup calling gst_clock_new_single_shot_id() with a NULL
pointer instead of a valid clock and also calling gst_object_unref()
with a NULL pointer later.
https://bugzilla.gnome.org/show_bug.cgi?id=757548
Previously, while allocating the pad number for a new pad, aggregator was
maintaining an interesting relationship between the pad count and the pad
number.
If you requested a sink pad called "sink_6", padcount (which is badly named and
actually means number-of-pads-minus-one) would be set to 6. Which means that if
you then requested a sink pad called "sink_0", it would be assigned the name
"sink_6" again, which fails the non-uniqueness test inside gstelement.c.
This can be fixed by instead setting padcount to be 7 in that case, but this
breaks manual management of pad names by the application since it then becomes
impossible to request a pad called "sink_2". Instead, we fix this by always
directly using the requested name as the sink pad name. Uniqueness of the pad
name is tested separately inside gstreamer core. If no name is requested, we use
the next available pad number.
Note that this is important since the sinkpad numbering in aggregator is not
meaningless. Videoaggregator uses it to decide the Z-order of video frames.
This code will never be called as max>=min in all cases. If the upstream
latency query returned min>max, the function already returned and all
values that are added to those have max>= min.
Not all aggregator subclasses will have a single pad template called sink_%u
and might do something special depending on what the application requests.
https://bugzilla.gnome.org/show_bug.cgi?id=757018
