mirrors/gstreamer
mirrors/gstreamer
1
1
Fork 0
mirror of https://gitlab.freedesktop.org/gstreamer/gstreamer.git synced 2024-12-26 18:20:44 +00:00
Code Issues 1 Projects Releases Wiki Activity
15154 commits 44 branches 1510 tags 331 MiB
Commit graph

1070 commits

Author SHA1 Message Date
Olivier Crête
7af9fdbca6 rtpsession: Process PSFB FIR requests which lack the media ssrc 
According to RFC 5104 section 4.3.1.2, RTCP PSFB FIR message SHALL
have a media_ssrc field set to 0. The actual media ssrc is in the FCI.
So in that case, we ignore the retained feedback and just let it through
to the rtp_session_process_fir() function which will check for the actual
SSRC inside the FCI.

Fixes a regression introduced by commit 57c27ec3
 2013-12-13 16:01:07 -05:00
George Kiagiadakis
6a2de911fa rtpsession: fix rb blocks disappearing after the first rtcp cycle with multiple senders 
Previously, when the session had multiple internal sender SSRCs, it would
issue SR reports with RB blocks only on the first RTCP timeout and afterwards
SR reports would be sent empty. This was because the "generation" number
in RTPSource would increase more than once during the same cycle and afterwards
it would always be greater than the session's generation, which would cause
it to be skipped from being included in RBs.

This commit fixes this problem by:
1) Increasing the RTPSource generation only at the end of each cycle,
which essentially fixes the problem but only when the internal senders
are less than GST_RTCP_MAX_RB_COUNT.
2) Keeping for each RTPSource a set of SSRCs which stores which SSRC's
SR the given RTPSource has been reported in, which also fixes the problem
when the internal senders are more than GST_RTCP_MAX_RB_COUNT. This is
necessary because of the fact that any RTPSource is marked as reported
in itself's SR and makes it impossible to know if it has been reported
in other SRs too or not, and which.
 2013-12-12 16:44:27 +01:00
George Kiagiadakis
c78a115154 rtpsession: keep extra stats for scheduling BYE 
Keep an extra stats structure for scheduling the BYE packets. When we
decide to schedule BYE, make a copy of the current stats into the
bye_stats. Then while we schedule the BYE, update and use only the
bye_stats. When we finished scheduling the BYE packet, we use the
regular stats again.
 2013-12-12 10:38:43 +01:00
George Kiagiadakis
282028e753 rtpsession: when we schedule BYE, only deal with BYE sources 
When we are doing the RTCP timeout to schedule BYE packets, don't
generate RTCP for all sources but only for the sources marked as BYE.
 2013-12-12 10:34:38 +01:00
George Kiagiadakis
6a421c3d81 rtpsession: reset state after scheduling BYE 
After we do RTCP, we are not scheduling bye anymore.
 2013-12-12 10:32:48 +01:00
George Kiagiadakis
0a0ff100ef rtpsession: also count NACKS when no signal was pending 2013-12-12 10:31:38 +01:00
George Kiagiadakis
bec9c04ea0 session: ignore RTCP packets for the BYE sources 
When we are scheduling BYE packets, ignore all RTCP for the sources that
are scheduling a BYE packet. Other sources that are not scheduling BYE
should continue receiving RTCP packets as usual.
 2013-12-12 10:09:25 +01:00
Julien Isorce
33b398e345 rtpsession: determine if the session is doing point-to-point 
In this case T_dither_max is set to 0 according to RFC 4585
 2013-12-10 16:57:56 +01:00
Wim Taymans
eee515cb2c rtpjitterbuffer: serialize events in the buffer 
Serialize events into the jitterbuffer by inserting them with a -1
seqnum.
Update unit test to expect events from the streaming thread.

Fixes https://bugzilla.gnome.org/show_bug.cgi?id=652986
 2013-12-10 11:57:37 +01:00
Wim Taymans
36e78bc5ca rtpjitterbuffer: detect -1 seqnum 
Keep the seqnum as a full guint so that we can check for -1 entries and
deal with them correctly.
Immediately try to push -1 seqnum.
 2013-12-10 11:04:06 +01:00
Wim Taymans
4a2e0f4ff4 rtpjitterbuffer: reorganize jitterbuffer items 
Keep the oldest item at the head and the newest items on the tail. This
makes it easier to deal with -1 seqnums.
 2013-12-10 11:01:03 +01:00
Wim Taymans
ea2a222cef jitterbuffer: correctly check for invalid values 
Check for -1 on the guint from the buffer item instead of on the guint16
or guint32.
Also insert -1 seqnum at the head of the jitterbuffer.
 2013-12-09 23:34:10 +01:00
Wim Taymans
e8edecc56e rtpsession: don't unref buffer twice 
Cleaning the packet info will already unref the buffer.

Fixes https://bugzilla.gnome.org/show_bug.cgi?id=715078
 2013-11-28 16:51:13 +01:00
Wim Taymans
710d1f3a2a rtpjitterbuffer: improve clear-pt-map handling 
Don't reset the expected output seqnum when clearing the pt map because this
could stall the jitterbuffer forever.
Add a unit test for this.

Fixes https://bugzilla.gnome.org/show_bug.cgi?id=709800
 2013-11-25 15:52:22 +01:00
Tim-Philipp Müller
901ec63462 rtpjitterbuffer: fix wake-up when new buffers come in after running empty 
Spotted by 'gratias' on IRC. Probably introduced in recent refactoring.

https://bugzilla.gnome.org/show_bug.cgi?id=715039
 2013-11-25 00:37:50 +00:00
Wim Taymans
4c9474905b rtpjitterbuffer: pass downstream flowreturn to upstream 
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=712722
 2013-11-22 12:27:31 +01:00
Wim Taymans
0c6f4efe4a rtpjitterbuffer: avoid mapping the buffer 
Reuse the parsed structure to get the timestamps.
 2013-11-19 10:12:00 +01:00
Tim-Philipp Müller
d506409af5 docs: get rid of 'Since: 0.10.x' markers 
And some gtk-doc markup fixes.
 2013-11-18 14:47:35 +00:00
Tim-Philipp Müller
548e756e0a rtpmanager: fix Since markers 
Should be next stable release series version
 2013-11-16 12:15:14 +00:00
George Kiagiadakis
387e3b918a rtpjitterbuffer: Fix stats property field names and documentation 2013-11-15 16:23:34 +02:00
Torrie Fischer
acf74435e3 gstrtpsession: Implement a number of feedback packet statistics 
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=711693
 2013-11-15 15:21:19 +01:00
Wim Taymans
b450d31503 rtpjitterbuffer: rename property to 'stats' 
This makes the unit test work.
We can later also add more stats, not specific to retransmission.

Fixes https://bugzilla.gnome.org/show_bug.cgi?id=711411
 2013-11-14 09:24:26 +01:00
Torrie Fischer
22ceb80ba9 rtpjitterbuffer: implement rtx statistics 2013-11-14 09:24:26 +01:00
Wim Taymans
2e5b462ae3 jitterbuffer: advance expected seqnum after dropping 
After dropping a buffer, move our expected seqnum

Conflicts:
	gst/rtpmanager/gstrtpjitterbuffer.c
 2013-11-13 12:02:57 +01:00
Wim Taymans
e4bc81d7d2 rtpsession: remove collision reconfigure event 
Remove bogus reconfigure event on collision, we don't want to send the event on
the receiving RTP pad and the collision event is now handling this
case.

See https://bugzilla.gnome.org/show_bug.cgi?id=711560
 2013-11-11 15:27:18 +01:00
Julien Isorce
b32fc6f416 gstrtpsession: send custom upstream event "GstRTPCollision" on send_rtp_sink pad 
See https://bugzilla.gnome.org/show_bug.cgi?id=711560
 2013-11-11 15:25:52 +01:00
George Kiagiadakis
b81b2efa3e rtpjitterbuffer: fix crash when do-retransmission=true and a lot of buffers are lost 
The problem here was that the jitterbuffer lock was unlocked to push
the event, but that caused another thread to remove the timer currently
being processed, probably because the amount of rtx events
(and therefore timers) was getting too high. The solution is to
unlock and push the event only after timer processing has finished.

fixes https://bugzilla.gnome.org/show_bug.cgi?id=711131
 2013-11-11 11:51:45 +01:00
Wim Taymans
c8db05d610 rtpsource: update receiver stats for sender 
An internal sender in a session is also a receiver of its own packets so update
the receiver stats. Other senders in the session will use this info to generate
correct RB blocks in their SR reports.
 2013-11-07 16:24:30 +01:00
Wim Taymans
268a75e705 rtpsource: refactor receiver stats update 2013-11-07 16:24:30 +01:00
Wim Taymans
e96f8f519c rtspsrc: proxy new buffer mode 2013-10-31 10:38:35 +01:00
Wim Taymans
43645d5981 jitterbuffer: add new timestamp mode 
Add a new timestamp mode that assumes the local and remote clock are
synchronized. It takes the first timestamp as a base time and then uses the RTP
timestamps for the output PTS.
 2013-10-31 10:15:25 +01:00
Wim Taymans
d4892859d4 jitterbuffer: fix race in flush-start/flush-stop 
When flush-stop arrives before we process the result of the _push() in the
loop function, we might pause even though we are not flushing anymore. Fix this
race by waiting for the srcpad loop function to completely pause after doing the
flush-start.
 2013-10-04 12:35:18 +02:00
Wim Taymans
00056965e8 rtpjitterbuffer: fix race when updating the next_seqnum 
If we were not waiting for the missing seqnum when we insert the lost packet
event in the jitterbuffer, we end up not updating the next_seqnum and wait
forever for the lost packets to arrive. Instead, keep track of the amount of
packets contained by the jitterbuffer item and update the next expected
seqnum only after pushing the buffer/event. This makes sure we correctly handle
GAPS in the sequence numbers.
 2013-09-30 12:31:00 +02:00
Wim Taymans
fde438791e rtpjitterbuffer: small debug improvement 2013-09-30 12:30:23 +02:00
Wim Taymans
6e7d547be4 rtpjitterbuffer: reset skew does not reset clock-rate 
Don't reset the clock-rate when we reset the skew correction algorithm.
Reset the skew correction algorithm when we change the clock-rate.
 2013-09-30 11:53:08 +02:00
Wim Taymans
03d520eb69 rtpjitterbuffer: pause timer when PAUSED 
Also pause the timer when we go to the PAUSED state. It is possible that we
don't have a clock or base-time in PAUSED to perform the timeouts.
 2013-09-30 11:16:32 +02:00
Wim Taymans
4a31aec513 rtpjitterbuffer: improve debug 2013-09-30 11:15:25 +02:00
Wim Taymans
d4b4b4e924 rtpjitterbuffer: don't calculate skew without rtptime 
Skip trying to calculate the skew when we don't have an rtptime.
It causes problems when lost packet events are placed in the jitterbuffer.
 2013-09-26 16:21:33 +02:00
Wim Taymans
2efd58fc84 rtpbin: avoid some pad link checks 
Link pads without checks, we know it will work.
 2013-09-25 17:38:31 +02:00
Wim Taymans
97f4674655 rtpjitterbuffer: calculate some stats 2013-09-25 10:50:05 +02:00
Wim Taymans
b1d29483bb rtpjitterbuffer: move send_lost_event function 
Move the send_lost_event function to the do_lost_event handling, there is no
need to have a separate function.
 2013-09-25 10:50:05 +02:00
Wim Taymans
adf5d96044 rtpmanager: update docs 2013-09-23 16:34:15 +02:00
Wim Taymans
e5019de80d docs: update docs with 1.0 element names 2013-09-23 15:36:47 +02:00
Wim Taymans
8ce674da87 rtpjitterbuffer: always store lost event in jitterbuffer 
Always prepare a lost event in the jitterbuffer, it is to wake up and make the
pushing thread continue. We drop the event when we are not supposed to push lost
events downstream.
 2013-09-23 14:45:27 +02:00
Wim Taymans
9f3345fcc2 rtpjitterbuffer: schedule lost event differently 
Schedule the lost event by placing it inside the jitterbuffer with the seqnum
that was lost so that the pushing thread can interleave and push it properly.
 2013-09-23 14:45:27 +02:00
Wim Taymans
ae389aeb0c rtpjitterbuffer: remove list debug 2013-09-23 14:45:26 +02:00
Wim Taymans
28641e3145 rtpjitterbuffer: add type to the item 
So that the upper layer can know what data is contained in the item.
 2013-09-23 14:45:26 +02:00
Wim Taymans
479c7642fd rtpjitterbuffer: fix flush 
Pass function to flush to properly free the queue items.
 2013-09-23 14:45:25 +02:00
Wim Taymans
0cc887eb98 rtpjitterbuffer: append seqnum -1 packets 2013-09-23 14:45:25 +02:00
Wim Taymans
39a2ba669d rtpjitterbuffer: use structure to hold packet information 
Make the jitterbuffer operate on a structure containing all the packet
information. This avoids mapping the buffer multiple times just to get the RTP
information. It will also make it possible to store other miniobjects such as
events later.
 2013-09-23 14:45:25 +02:00
Wim Taymans
1760817005 rtpjitterbuffer: update expected timer when possible 
When we receive a packet and we have some missing packets, we can update their
estimated arrival times based on the timestamp difference.
 2013-09-23 14:45:25 +02:00
Wim Taymans
fdc1ed1680 rtpjitterbuffer: fix order of timeout events 
Improve the order of the timeout events, if there are timers with the same
timeout, we want to trigger the lowest seqnum first. For this we need to loop
over the complete array of timers to find the best one before triggering the
timeout.
 2013-09-23 14:45:25 +02:00
Wim Taymans
0b1a7edfea rtpjitterbuffer: send lost event before signaling next buffer 
First send the lost event, then update the next_seqnum counter and then
send the signal to the pushing thread that it can retry to push a buffer. This
avoids pushing out buffers before the lost event is pushed.
 2013-09-23 14:45:25 +02:00
Wim Taymans
5051f51f0a jitterbuffer: configure clock-rate on jitterbuffer 
Add a get and setter to configure the clock-rate in the jitterbuffer instead of
passing it as an argument to the insert method.
 2013-09-23 14:45:24 +02:00
Wim Taymans
3c421e7e48 rtpjitterbuffer: add option to reset retransmission timers 2013-09-23 14:45:24 +02:00
Wim Taymans
6f4deab298 rtpjitterbuffer: stop the timer thread 
The timeout code could release the lock so we need to check if we are allowed to
wait for the clock some more.
 2013-09-23 14:45:24 +02:00
Wim Taymans
cba4e6a707 rtpjitterbuffer: unlock only once 2013-09-23 14:45:24 +02:00
Wim Taymans
5dc207948c rtpjitterbuffer: improve flush and shutdown 
There is no need to unschedule the timer in flush-start, flush-stop will remove
the timers and unschedule.
Unschedule the current timer before attempting to join the timer thread.
 2013-09-23 14:45:23 +02:00
Wim Taymans
a512cc2d3c rtpjitterbuffer: set correct expected time 
When we already have a timer for a packet, skip it but don't forget to adjust
the dts to the expected dts of the next packet.
 2013-09-23 14:45:23 +02:00
Wim Taymans
517ea0f4d9 jitterbuffer: improve debug 2013-09-23 14:45:23 +02:00
Wim Taymans
fd6c57cf10 rtpjitterbuffer: keep delay as a separate variable in timer 
Keep a separate delay in the timer so that we still know the original timestamp
of the packet that this timer refers to. We can then place the correct
running-time in the Retransmission event.
 2013-09-19 14:32:48 +02:00
Wim Taymans
d34184dd03 rtpjitterbuffer: fix writability of properties 2013-09-19 14:32:48 +02:00
Wim Taymans
6bb2626498 rtpjitterbuffer: reevaluate the current timer after timeout 
When we trigger the timeout logic of a timer, reevaluate it because it is
possible that it still has the lowest timeout.
 2013-09-18 16:33:40 +02:00
Wim Taymans
8d021b6ede rtpjitterbuffer: don't update time when unscheduled 
Don't try to estimate the current time when we got unscheduled.
 2013-09-18 16:31:26 +02:00
Wim Taymans
65606a25bf rtpjitterbuffer: init packet spacing on first buffer 
Already init the packet spacing variables on the first buffer so that we can
calculate the spacing on the second buffer already.
 2013-09-18 16:29:37 +02:00
Wim Taymans
f2efdf28f5 rtpjitterbuffer: push the lost event from the timer thread 
Instead of pushing the lost event from the chain function, schedule a timeout
that will push the lost event from the timer thread. This avoid blocking the
upstream thread while we push and sync the event.
 2013-09-18 14:57:09 +02:00
Wim Taymans
5d5fc03e04 rtpjitterbuffer: round gap duration to multiple of duration 
Make sure the gap duration in the lost event is a multiple of the packet
duration.
Enable another test.
 2013-09-18 14:12:47 +02:00
Wim Taymans
6e4a051d40 rtpjitterbuffer: keep track of duration 
Keep track of the estimated duration of missing packets and use it in the lost
event.
Enable another unit test
 2013-09-18 12:29:38 +02:00
Wim Taymans
ac3bb3acf6 rtpjitterbuffer: handle large gaps with one lost event 
When we have a large number of missing packets, generate one lost event for all
the packets that have no chance of being pushed out in time.
Fix and activate unit test for large gaps.
 2013-09-18 11:59:28 +02:00
Wim Taymans
26402e1c21 rtpjitterbuffer: refactor lost event sending 
Also make sure we only increment the expected seqnum and last
output timestamp.
 2013-09-18 11:57:06 +02:00
Wim Taymans
f49981a597 jitterbuffer: refactor timeout triggers 2013-09-17 23:29:56 +02:00
Wim Taymans
047021c443 jitterbuffer: simplify the timeout code 
Keep track of the current time in the timeout loop.
Loop over all timers and trigger all the expired ones, we can do this in the
same loop that selects the new best timer.
 2013-09-17 23:29:56 +02:00
Wim Taymans
fa1ef3328b jitterbuffer: rearrange timer update code 
Also update the timers when retransmission is disabled. We need to
do this because when we added LOST timers when we detected missing packets and
we need to remove those timers when the packet finally arrives.
 2013-09-17 23:29:56 +02:00
Wim Taymans
232fdd8b56 jitterbuffer: release lock on shutdown 2013-09-17 15:19:42 +02:00
Wim Taymans
4de919a17a jitterbuffer: use separate thread for timeouts 
Use a separate thread for scheduling the timeouts instead of using the
downstream streaming thread that might block at any time.
 2013-09-16 15:55:55 +02:00
Olivier Crête
b9ceafe5af rtpsession: Demux RTCP buffers from the RTP stream 
If there are RTCP buffers in the RTP stream, process them as
RTCP. This way, we want receive streams following RFC 5761

https://bugzilla.gnome.org/show_bug.cgi?id=687657
 2013-09-13 16:25:49 +02:00
Wim Taymans
28e5f90988 rtpbin: use PacketInfo for the sender 
Avoid mapping the packet multiple times when sending RTP.
 2013-09-13 14:34:28 +02:00
Wim Taymans
a02c9473d8 rtpbin: store more in the PacketInfo 
Store all info in the PacketInfo so that we can avoid mapping the packet
multiple times.
 2013-09-13 14:34:28 +02:00
Wim Taymans
e5c789abd6 session: store more in the PacketInfo structure 2013-09-13 14:34:28 +02:00
Wim Taymans
47662f9ca4 rtpbin: RTPArrivalStats -> RTPPacketInfo 
Rename a structure because we are also going to use this for the sender
bits.
 2013-09-13 14:34:28 +02:00
Wim Taymans
c795b72988 source: small cleanups 2013-09-13 14:34:27 +02:00
Wim Taymans
9f9ba21404 jitterbuffer: handle segments with non-0 start 
We keep the DTS and PTS in running-time inside the jitterbuffer. Make sure to
transform it back to a buffer timestamp before pushing out the buffer.

Fixes https://bugzilla.gnome.org/show_bug.cgi?id=707931
 2013-09-12 15:04:30 +02:00
Wim Taymans
f1106cde66 session: only update next check time when reconsidering 
Don't update the next RTCP check time in all cases but only when we
reconsidered. This avoids delaying sending a full RTCP packet when we
are doing early feedback.
 2013-08-27 09:55:52 +02:00
Wim Taymans
47065db0b6 session: add more debug 2013-08-27 09:55:52 +02:00
Wim Taymans
454d75951e jitterbuffer: fix types of the retransmission event 2013-08-27 09:55:52 +02:00
Wim Taymans
dd4af0d11c jitterbuffer: only timeout EXPECTED timers on gap 
Only timeout the EXPECTED timers when we detect a large seqnum gap.
 2013-08-27 09:44:18 +02:00
Wim Taymans
4b7bcc2ec1 rtsession: fix locking 
We need to take the session lock when getting and manipulating the
source.
 2013-08-26 11:50:27 +02:00
Wim Taymans
3f46527f75 rtpsession: add some more debug 2013-08-26 11:50:13 +02:00
Wim Taymans
54e7e7547a rtxqueue: add property to configure queue size 2013-08-23 15:47:25 +02:00
Wim Taymans
84833bed11 rtpbin: proxy jitterbuffer do-retransmission property 2013-08-23 12:10:19 +02:00
Wim Taymans
89b9019e3e rtx: various improvements 
Use locking
Don't push from the event handler, collected packets in a queue and push from
the chain function.
Clear queues on shutdown.
 2013-08-21 17:02:27 +02:00
Wim Taymans
ee15bc9284 session: generate events correctly 
Do correct shifting of the bitmask for lost packets.
 2013-08-21 17:02:27 +02:00
Wim Taymans
67523d3ecb rtp: register rtx element better 2013-08-21 17:02:26 +02:00
Wim Taymans
587dc055e9 jitterbuffer: handle EOS 
When the queue is empty, and we received EOS, pause and push an EOS
event downstream.

Fixes https://bugzilla.gnome.org/show_bug.cgi?id=706387
 2013-08-20 14:36:59 +02:00
Wim Taymans
533f26fc99 jitterbuffer: update docs 2013-08-20 10:26:15 +02:00
Wim Taymans
c7f9ef8012 jitterbuffer: update all timers 
Keep looping over all registered timers so that we can mark them lost instead of
stopping as soon as we find the timer for the current seqnum.
 2013-08-20 10:25:17 +02:00
Wim Taymans
5debda9ca1 jitterbuffer: remove unused variables 2013-08-20 08:55:50 +02:00
Wim Taymans
a88db5fa2c jitterbuffer: reorganize timer handling 
Restructure handling of incomming packet and the gap with the expected seqnum
and register all timers from the _chain function.
Convert a timer to a LOST packet timer when the max amount of retransmission
requests has been reached.
 2013-08-19 22:04:51 +02:00
Wim Taymans
d9d6eac4bb jitterbuffer: refactor packet spacing calculation 2013-08-19 22:04:50 +02:00
Wim Taymans
c4dc159656 jitterbuffer: keep track of last seqnum and dts 2013-08-19 22:04:50 +02:00
Wim Taymans
652ce95ca6 jitterbuffer: small cleanups 2013-08-19 22:04:50 +02:00
Wim Taymans
b4a35bbe82 jitterbuffer: reset retransmission timers in add/reschedule 
Reset the retransmission timers when adding and rescheduling a timer.
 2013-08-19 22:04:50 +02:00
Wim Taymans
cf8a0652f3 jitterbuffer: rename variables for packet spacing 2013-08-19 22:04:50 +02:00
Wim Taymans
ec82e4ab7c jitterbuffer: remove lost timer when we get the packet 
When we receive a packet, also remove the LOST timer for it.
 2013-08-19 22:04:50 +02:00
Wim Taymans
2f03b43b21 jitterbuffer: expected seqnum must increase 
Only update the expected seqnum when it is bigger than the previous expected
seqnum.
 2013-08-19 22:04:50 +02:00
Wim Taymans
c5bf376bb5 jitterbuffer: add more debug 2013-08-19 22:04:50 +02:00
Wim Taymans
ff825a2919 rtxqueue: add retransmission queue element 2013-08-19 22:04:50 +02:00
Wim Taymans
5fe18ee432 session: add some docs 2013-08-19 22:04:49 +02:00
Wim Taymans
482dacfb54 session: handle NACK feedback and generate events 
Handle and parse the feedback NACK packets and generate a Retransmission
event for each NACKed packet
 2013-08-19 22:04:49 +02:00
Wim Taymans
f11c2c9b3b jitterbuffer: forward flush before stopping dataflow 
First forward the flush event and then stop our loop function.
 2013-08-14 16:19:32 +02:00
Wim Taymans
48174164eb session: add NACK feedback in RTCP 2013-08-06 15:50:19 +02:00
Wim Taymans
4379ed1dee source: add methods to register NACK 
Add a method to register a missing packet for an ssrc along with
methods to get the missing packets and clear them.
 2013-08-06 15:50:19 +02:00
Wim Taymans
50638b8106 session: handle Retransmission event and schedule NACK 
Handle the retransmission event from downstream and use it to schedule a NACK
request.
 2013-08-06 15:50:19 +02:00
Wim Taymans
0bddbd682d session: pass data to remove func 
Pass the data to the remove function because we are going to deref it when there
is pli or fir.
 2013-08-06 15:50:19 +02:00
Wim Taymans
3c82de59f9 session: use common send_rtcp method 
Reuse the send_rtcp method that already asks for the current time when
requesting a keyframe.
 2013-08-05 15:02:59 +02:00
Wim Taymans
3c14c6021c session: Don't use ClockTimeDiff for unsigned delays 2013-08-05 15:02:59 +02:00
Tim-Philipp Müller
7469cd3a4c rtpmanager: use generic marshaller 2013-08-04 11:03:07 +01:00
Wim Taymans
7584f91f31 jitterbuffer: send event in right direction 2013-08-04 00:24:36 +02:00
Wim Taymans
9613e481ad session: add FIR and PLI like other RTCP packets 
Add the FIR and PLI packets like the other RTCP packet instead of from the
on-sending-rtcp default signal handler.
 2013-08-03 00:33:24 +02:00
Wim Taymans
743e1b1191 jitterbuffer: fix property ranges 2013-08-02 17:22:55 +02:00
Wim Taymans
cd0164f4cc jitterbuffer: push retransmission events 2013-08-02 16:43:59 +02:00
Wim Taymans
9a13267e85 jitterbuffer: add support for retransmission retry 
When we didn't receive a packet after requesting retransmission, retry
asking for retransmission for a certain period.
 2013-08-02 14:54:56 +02:00
Wim Taymans
e9ad5126db jitterbuffer: add properties 
Add properties to control retransmission parameters
 2013-08-02 14:47:56 +02:00
Wim Taymans
a8c7ff7489 jitterbuffer: use corrected timeout when rescheduling 
When we recalculate the timeout, use the corrected timeout value depending on
the timer type.
 2013-08-02 12:44:58 +02:00
Wim Taymans
9c7e3e3455 jitterbuffer: update timers after queueing 
Else we might update the timer needlessly for duplicates.
 2013-08-02 12:43:00 +02:00
Wim Taymans
ebd6b8f8ab jitterbuffer: move method up 2013-08-02 12:42:08 +02:00
Wim Taymans
f6b6797874 jitterbuffer: small cleanup 2013-08-02 06:28:32 +02:00
Wim Taymans
0e41414926 jitterbuffer: unschedule old expected packets 
When we receive a new packet, unschedule old outstanding packets when their
seqnum is too far away.
 2013-08-01 23:36:07 +02:00
Wim Taymans
70695466ed jitterbuffer: refactor timer update 2013-08-01 23:32:00 +02:00
Wim Taymans
4ab3f5d3da jitterbuffer: update timers when removing 
Update the timers when we remove a timer.
Handle canceled timers, make them unschedule the current timer and
trigger the timeout code.
 2013-08-01 23:24:29 +02:00
Wim Taymans
b983cf675b jitterbuffer: fix typo 2013-08-01 23:22:02 +02:00
Wim Taymans
f3c658cbe6 jitterbuffer: improve timeout management 
If we change the seqnum of an existing timer and we were waiting for
that timer, unschedule it. If we change the timeout of an existing timer and we
were waiting on it, only unschedule when the new time is smaller.
 2013-08-01 15:40:52 +02:00
Wim Taymans
77e5d320ab jitterbuffer: install timer for expected arrival 
Install a timer that is triggered when the expected arrival time of a packet
expired.
 2013-08-01 15:11:13 +02:00
Wim Taymans
f08d98404e jitterbuffer: improve unschedule of timers 
Conflicts:
	gst/rtpmanager/gstrtpjitterbuffer.c
 2013-08-01 14:57:11 +02:00
Wim Taymans
9d3b824e2a jitterbuffer: move code around 2013-08-01 12:21:53 +02:00
Wim Taymans
fe32e80c92 jitterbuffer: estimate inter packet spacing 
When we see two packets with consecutive seqnums and a different RTP time, use
the DTS difference as the inter packet spacing estimate.
 2013-08-01 12:07:11 +02:00
Wim Taymans
255b7106f5 jitterbuffer: keep track of current timeout 2013-08-01 12:01:15 +02:00
Wim Taymans
7e43dba19b jitterbuffer: cleanup timer handling 2013-08-01 11:49:10 +02:00
Wim Taymans
9d88ac9cbb jitterbuffer: reset is only possible with a GAP 2013-08-01 11:40:41 +02:00
Wim Taymans
f864131227 jitterbuffer: operate on DTS 
Make the jitterbuffer schedule the timeouts based on the DTS instead
of the PTS. This makes it all smoother with reordered frames and gives
the decoder time to reorder the frames in time.
 2013-08-01 11:36:56 +02:00
Wim Taymans
80c5934290 jitterbuffer: rename timout variable 2013-08-01 11:14:12 +02:00
Wim Taymans
aa951433ee jitterbuffer: small cleanup 2013-07-31 17:08:58 +02:00
Wim Taymans
69c78f72d5 jitterbuffer: block output in paused or buffering 2013-07-31 16:59:58 +02:00
Wim Taymans
4fbbc53a49 jitterbuffer: store pts in timer 
Only store the pts in the timer so that we can both do timeouts with timings on
the input and output of the jitterbuffer.
 2013-07-31 16:59:09 +02:00
Wim Taymans
77846d35c6 rtpjitterbuffer: refactor jitterbuffer 
Refactor the jitterbuffer code. Make separate function for peeking a buffer,
pushing the next buffer, waiting for timeouts and handling the timeouts.

The main loop now tries to push as many buffers as it can until it runs out of
buffers or when it detects a seqnum discont. Then it will wait for some event to
happen before attempting to push more buffers.

Make methods to register timeouts in an array. These timeouts are registered
when we detect a missing packet, sync for the first packet or when we find an
estimation for the end-of-stream.

This greatly simplifies and clarifies the code and also makes it possible to
register more complicated timeout schemes later.
 2013-07-30 23:24:23 +02:00
Wim Taymans
ea931d4f57 rtpjitterbuffer: use NULL to ignore percent 
If we pass NULL to pop and push we ignore the percent result.
 2013-07-30 23:24:23 +02:00
Wim Taymans
b3e8a85a54 jitterbuffer: refactor 
Move eos estimation into separate function
 2013-07-30 23:24:22 +02:00
Wim Taymans
02359f9219 session: don't make buffer writable prematurely 
There is no reason to make the SR buffer writable at this point. This is better
delayed until needed.
 2013-07-26 22:31:41 +02:00
Wim Taymans
0261199fc4 session: ignore RTCP for inactive sources 2013-07-26 22:31:23 +02:00
Wim Taymans
a4b4ca53c0 session: small cleanup 2013-07-26 22:25:17 +02:00
Wim Taymans
e0abd2e9b5 session: handle partial RTCP report blocks 
When we have more SSRCs to report than what fit in an RTCP packet, use a
generation counter to make sure all of them end up in a packet eventually.
 2013-07-26 17:29:10 +02:00
Wim Taymans
6cce6fb04c session: create SSRC before doing session cleanup 
Make the internal source before we do session cleanup
 2013-07-26 17:29:10 +02:00
Wim Taymans
5b0298c63e session: reorganize the report block code 2013-07-26 17:29:10 +02:00
Wim Taymans
3c44cd7c83 session: refactor active and sender checks 2013-07-26 14:21:40 +02:00
Wim Taymans
e952f7ba43 session: remove internal sources on timeout 
When an internal source times out and becomes a receiver, remove it.
 2013-07-26 12:18:01 +02:00
Wim Taymans
e9e2fe3950 session: create an internal source for RTCP 
When we need to do RTCP and we don't have an internal source yet,
make one.
 2013-07-26 12:18:01 +02:00
Wim Taymans
bd0709c15c session: remove old code to change SSRC 
Remove code used to change the SSRC after a collision. We now send
a RECONFIGURE event upstream to make the upstream element change the SSRC.
 2013-07-26 12:18:01 +02:00
Wim Taymans
88f5a5f355 source: don't update packet SSRC 
Remove the code to update the SSRC in packets, it can never be called now that
we always use a source with matching packet SSRC.
 2013-07-26 12:18:01 +02:00
Wim Taymans
abc90da1dc session: delay allocation of internal source 
Allocate the internal source when we receive a caps with the SSRC or when we see
a buffer with the SSRC.
 2013-07-26 12:18:01 +02:00
Wim Taymans
e0a1ce1291 session: generate reconfigure on collision 
When we detect a collision, change the SSRC that we suggest upstream
and trigger RECONFIGURE. This should make upstream select a new SSRC.
 2013-07-26 12:18:01 +02:00
Wim Taymans
495d43c089 session: produce RTCP for all internal sources 
Loop over all the internal sources and produce RTCP. We also need
to queue the RTCP packets and send them when we are finished.
 2013-07-26 12:18:00 +02:00
Wim Taymans
9505fd4150 session: deprecate internal source and ssrc properties 
Deprecate the internal source and internal ssrc properties. There might
be more than one internal source.
 2013-07-26 12:17:59 +02:00
Wim Taymans
3d6ee1fb5e session: internal sources don't use probation 2013-07-26 12:17:59 +02:00
Wim Taymans
0e53e9109e session: give caps to session 
Let the session parse the caps and update its SSRC when needed.
 2013-07-26 12:17:59 +02:00
Wim Taymans
c06482a2cb session: make method to suggest available SSRC 
Make a method to suggest the best available SSRC. This is the SSRC of the last
created internal source and is used to instruct upstream to produce this
SSRC.
 2013-07-26 12:17:59 +02:00
Wim Taymans
33ce50e8b1 session: keep SDES and set on new internal sources 
Keep track of the SDES ourselves and set it on all newly created
internal sources.
 2013-07-26 12:17:59 +02:00
Wim Taymans
5652f02b76 session: make method to make internal sources 
Add a method to obtain an internal source and use it to create
our internal source
 2013-07-26 12:17:59 +02:00
Wim Taymans
7f83927c95 session: count internal sources and how many are senders 2013-07-26 12:17:58 +02:00
Wim Taymans
719343c206 rtpsession: separate BYE marking and scheduling 
First mark sources with BYE and then schedule the BYE RTCP message.
 2013-07-26 12:17:58 +02:00
Wim Taymans
391943ba82 session: get SSRC from RTCP packet itself 
Get the SSRC from the RTCP packet instead.
 2013-07-26 12:17:57 +02:00
Wim Taymans
a3f75a17ef session: fix bandwidth calculation 
We iterate over all sources and the internal one is also in the
hashtable so avoid adding it twice.
 2013-07-26 12:17:57 +02:00
Wim Taymans
9eaef9d332 session: add some docs 2013-07-26 12:17:56 +02:00
Wim Taymans
2163355a47 session: Rearrange RTCP reporting a little 
Make a function to generate an RTCP packet for a source, pass the source as a
parameter.
Move timeout of collisions to session cleanup phase.
 2013-07-26 12:17:56 +02:00
Wim Taymans
a3bf374351 session: move check for is_early around 
Move the check for the early RTCP to where it is needed and used.
 2013-07-26 12:17:56 +02:00
Wim Taymans
b069db6a2e session: parse packet outside of the session lock 2013-07-26 12:17:56 +02:00
Wim Taymans
57c27ec319 session: do nicer checks for internal sources 2013-07-26 12:17:56 +02:00
Wim Taymans
93d07298ff session: let source keep track if it sent BYE 2013-07-26 12:17:56 +02:00
Wim Taymans
0c9c1434a8 source: reset more 2013-07-26 12:17:56 +02:00
Wim Taymans
1d02496d15 source: also use the source for bye_reason 
Store the BYE reason in our internal source object. Rename the methods on the
source object a little because now the BYE can be received in RTCP or
set when the session wants to send BYE.
 2013-07-26 12:17:56 +02:00
Wim Taymans
ddd071e54c session: configure sdes with structure only 
Remove code to configure the SDES with methods and types, only
allow configuration with GstStructure
 2013-07-26 12:17:55 +02:00
Wim Taymans
0060e1d45d session: refactor add and find source 
Make functions to find and add a source to the hashtable.
 2013-07-26 12:17:55 +02:00
Wim Taymans
adb0d68c07 session: remove source from sync_rtcp 
We don't need to know the sender source of the session in the
callback, the SR packet is for all participants in the session.
 2013-07-26 12:17:55 +02:00
Wim Taymans
bf7d8173b3 jitterbuffer: add some more debug 2013-07-26 12:17:55 +02:00
Wim Taymans
c44a29bd53 bin: fix compilation 2013-07-24 14:17:45 +02:00
Wim Taymans
f87875e35b rtpjitterbuffer: fix locking 
Take the lock earlier so that we do things that follow with the right
locking.
 2013-07-24 10:49:03 +02:00
Wim Taymans
dece8413ef rtpsession: don't use invalid times in RTCP timeouts 
An invalid timeout can be calculated when we disabled RTCP by setting the
bandwidth to 0. Make sure all code can handle this case.

Fixes https://bugzilla.gnome.org/show_bug.cgi?id=674626
 2013-07-23 17:41:48 +02:00
Wim Taymans
25e0f0d6b6 rtpsession: lock session when changing bandwidth 
Take the session lock when changing the bandwidth properties so that we don't
end up with inconsistent behaviour.
 2013-07-23 17:41:48 +02:00
Wim Taymans
c337265ee4 session: reset some RTCP variables 
The early_send time was set to 0 and always triggering an early RTCP packet.
 2013-07-23 17:41:48 +02:00
Carlos Rafael Giani
95429f1d4b rtpbin: added custom downstream sync event 
rtpbin can now send a custom in-band downstream event which informs
downstream that the bin has received an RTCP SR packet. This is useful
for applications which want to drop the initial unsynchronized received
RTP packets.

Fixes https://bugzilla.gnome.org/show_bug.cgi?id=703560

Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
 2013-07-23 06:25:20 +02:00
Sebastian Dröge
5a9f4a3cbc rtpsession: Add support for group-id in the stream-start event 2013-07-22 15:30:13 +02:00
Olivier Crête
3aa20e7c8d rtpmux: Enable proxy caps on the src pads 2013-07-11 17:21:22 -04:00
Olivier Crête
1997acc8b2 rtpmux: Keep caps order from the peer or the filter 2013-07-09 17:43:31 -04:00
J. Rick Ramstetter
f01b751e52 rtp: Fix documentation and comments to use rtpbin instead of old gstrtpbin 
https://bugzilla.gnome.org/show_bug.cgi?id=703426
 2013-07-02 10:12:17 +02:00
Wim Taymans
519305d14d jitterbuffer: improve sync on first packets 
Don't throw away the first RTCP packet if it arrives before the first
RTP packet but remember and use it to signal sync once we get the
RTP packet.

See https://bugzilla.gnome.org/show_bug.cgi?id=691400
 2013-06-27 16:23:20 +02:00
Wim Taymans
8969f00661 jitterbuffer: only signal loop when active 
Only signal the loop function when it is active.
 2013-06-27 16:15:45 +02:00
Wim Taymans
4bd2ffb26e jitterbuffer: signal timestamp discont 
We can now use the RESYNC buffer flag to mark a timestamp discont when we update
the ts-offset property.
 2013-06-27 16:13:37 +02:00
Olivier Crête
2cd6f53e24 rtpptdemux: Wait after the caps to forward the other events 
First forward the stream-start, then the caps, then the rest
 2013-06-20 23:16:59 -04:00
Wim Taymans
51c9f7989f rtpsession: Use the right hashtable to calculate bandwidth 
Don't use an unused hashtable to iterate source to calculate bandwidth.
Remove unused code.
 2013-06-13 16:02:19 +02:00
Wim Taymans
63f0ecbbe7 rtpsession: send stream-start and segment events 
Also send stream-start and segment event on the RTCP pad.
We don't need to send anything on the sync_src pad because we
already forwarded all incomming events.
 2013-05-28 12:26:25 +02:00
Nicolas Dufresne
04c9f43567 rtpmux: Send stream-start before caps 2013-05-13 15:37:05 +02:00
Sebastian Dröge
b0b0557c48 gst: Add better support for static plugins 2013-04-15 15:54:11 +02:00
Olivier Crête
6f3734c305 rtpssrcdemux: Only forward stick events while holding the sinkpad stream lock 
Otherwise we get a race where if the RTCP packet comes in first and while
it is added the pads, the segment event arrives on the RTP stream, the event
may be lost completely and never forwarded.
 2013-04-02 23:42:42 -04:00
Olivier Crête
76679f9ae9 rtpssrcdemux: No need to explicitely forward the caps 
They are forwarded with the other events
 2013-04-02 23:42:41 -04:00
Olivier Crête
4ad8693f3c rtpssrcdemux: Remove unused GstSegment 2013-04-02 23:42:41 -04:00
Olivier Crête
7293b0eff7 rtpssrcdemux: Simplify event forwarding 
Use the gst_pad_forward() mechanic, this way we won't miss pads that are
added while we are pushing
 2013-04-02 23:42:41 -04:00
Olivier Crête
f4c3aef13a rtpssrcdemux: Don't cross the internal links 
We had the wrong condition to check for the internal links, so RTP and RTCP
pads got crossed!
 2013-04-02 23:42:41 -04:00
Paul HENRYS
10802cae73 rtpsession: Fix wrong code organisation in case of collision 
change_ssrc field of RTPSession should be set before calling
rtp_session_schedule_bye_locked () as this function will call reconsider function
that will wake up rtcp_thread which will call rtp_session_on_timeout () that will
check change_ssrc to change the ssrc.

Fixes https://bugzilla.gnome.org/show_bug.cgi?id=694184
 2013-02-22 09:28:07 +02:00
Wim Taymans
a61055809f rtpsession: only delay RTCP when we are a sender 
Only delay the RTCP thread when we are a sender, which we can know because we
have a send_rtp_src pad. Otherwise we might delay the RTCP thread if we
are only a receiver and then there is no code path that wakes up the
RTCP thread and we end up without RTCP packets.
 2013-02-20 21:07:41 +02:00
Wim Taymans
2d5319c1fa rtpsession: delay RTCP until first RTP packet 
Delay sending the first RTCP packet until we have sent the first RTP packet.
Otherwise we will send out a Receiver Report instead of a sender report.

See https://bugzilla.gnome.org/show_bug.cgi?id=691400
 2013-02-08 17:05:27 +01:00
Wim Taymans
2971ed44ee rtpsession: remove dead code 
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=668355
 2013-02-07 15:06:40 +01:00
Paul HENRYS
0e91c949d8 rtpptdemux: forward sticky events and then set caps 
When a new src pad is added, first forward the sticky events and then
set the caps on the src pad

Fixes https://bugzilla.gnome.org/show_bug.cgi?id=692786
 2013-02-07 14:38:20 +01:00
Markovtsev Vadim
7cebe2fc41 rtpjitterbuffer: improve debug output 
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=688935
 2013-02-07 14:32:26 +01:00
Wim Taymans
978cc9f538 rtpbin: rework cleanup of streams 
Move the work of cleaning up the client streams in the free_stream
function. This allows us to properly clean up the client streams when we
remove an RTP stream as well.

Based on patch by Sujay <sdatar@cisco.com>

Fixes https://bugzilla.gnome.org/show_bug.cgi?id=660156
 2013-02-07 13:02:34 +01:00
Wim Taymans
c3077012c0 jitterbuffer: do skew estimation only for new timestamps 
Only run the skew estimation code when we have a new RTP timestamp. If we have
the same RTP timestamp, we simply use the previous estimation. This works
because the new observation with the same RTP timestamp has to have a bigger
receiver time and is thus not going to influence the estimation except for
causing more jitter.

Fixes https://bugzilla.gnome.org/show_bug.cgi?id=640023
 2013-02-06 17:15:11 +01:00
Wim Taymans
747447d298 rtpsession: avoid '...is used uninitialized' 2013-01-29 10:32:51 +01:00
Tim-Philipp Müller
629772f735 rtpmanager: use C89-style comments 2013-01-28 23:07:34 +00:00
Olivier Crête
451217c437 gstrtpsession: Fix double-declared variable 2013-01-28 18:06:15 -05:00
Olivier Crête
7300d489fe rtp: Fix compilation errors in previous patches 2013-01-28 17:58:20 -05:00
Haakon Sporsheim
86c13ceae6 rtpsession: Ensure MT safe event handling and plug event leak. 
https://bugzilla.gnome.org/show_bug.cgi?id=667826
 2013-01-28 17:44:31 -05:00
Idar Tollefsen
268c998a32 rtpsession: mt-safe event-push 
By taking a ref of the sink-pad under lock, it won't dissappear
while the push is taking place

https://bugzilla.gnome.org/show_bug.cgi?id=667816
 2013-01-28 17:34:50 -05:00
Pascal Buhler
f459fe2673 rtpssrcdemux: Safely push on pads that might be removed due to a RTCP BYE 
https://bugzilla.gnome.org/show_bug.cgi?id=667815
 2013-01-28 17:01:27 -05:00
Wim Taymans
72402cc649 rtp: small improvements 2013-01-08 16:27:42 +01:00
Wim Taymans
af055d9574 jitterbuffer: refactor handle sync code 
Move the code that combines the last SR packet and the current jitterbuffer sync
values into a sync structure, into its own function. We want to reuse this bit
later.
 2013-01-07 15:50:33 +01:00
Wim Taymans
87f7d6b9bf rtp: include downstream latency in SR calculations 
When we make a mapping between an RTP timestamp and an NTP timestamp, include
the downstream latency applied to the sinks. This makes it possible to have
both sinks run with different latencies and still have correct sync on the
client. It also is more correct because the RTP timestamp in the SR report will
actually correspond more closely to the NTP time it was sent on the server.
For pipelines with high latency on the sender side, this actually allows a
GStreamer receiver to perform synchronisation instead of dropping the RTCP
packets.
 2013-01-07 15:45:10 +01:00
Wim Taymans
c631ed3300 rtpsession: don't cast event functions 
There is no need to cast the event functions and only causes problems later when
we change the signature later and things silently compiles wrong code.
 2013-01-07 14:25:14 +01:00
Wim Taymans
8dcde8b3ea rtp: more debug 2013-01-07 14:23:34 +01:00
Wim Taymans
6b7d05ac57 rtpsession: improve debug 2013-01-07 14:22:48 +01:00
Tim-Philipp Müller
8a3b116d1f docs: add rtpmux and rtpdtmfmux to plugin docs 
https://bugzilla.gnome.org/show_bug.cgi?id=629117
 2012-12-16 16:36:39 +00:00
Tim-Philipp Müller
3295b5d791 rtpmanager: move rtpmux and rtpdtmfmux elements from -bad 
https://bugzilla.gnome.org/show_bug.cgi?id=629117
 2012-12-16 16:36:39 +00:00
Tim-Philipp Müller
de204ba754 rtpmux: Fix FSF address 
https://bugzilla.gnome.org/show_bug.cgi?id=687520
 2012-12-16 16:36:39 +00:00
Tim-Philipp Müller
2778a1757f rtpmux: Use gst_element_class_set_static_metadata() 
where possible. Avoids some string copies. Also re-indent
some stuff. Also some indent fixes here and there.
 2012-12-16 16:36:39 +00:00
Olivier Crête
15dfdc58d4 rtpmux: Misc fix for 0.11 
Convert the incoming caps before proxying them
Clear the last_pad when going to ready

tests: Implement accept_caps, don't leak event
 2012-12-16 16:36:38 +00:00
Wim Taymans
83262be703 rtpmux: update for RTP buffer api changes 2012-12-16 16:36:38 +00:00
Sebastian Dröge
f17064a8ea rtpmux: Update for GST_PLUGIN_DEFINE() API changes 2012-12-16 16:36:34 +00:00
Wim Taymans
c86156ad8f rtpmux: fix compilation 2012-12-16 16:35:36 +00:00
Wim Taymans
6826bbb6da rtpmux: fix for caps api changes 2012-12-16 16:35:33 +00:00
Matej Knopp
bb345a584d rtpmux: Fix compiler warnings 2012-12-16 16:35:29 +00:00
Olivier Crête
af4e999c59 rtpmux: Unref non-forwarded events 
Also, don't unref forwarded ones
 2012-12-16 16:35:29 +00:00
Olivier Crête
a8789d1df1 rtpmux: resync iterator on resync 2012-12-16 16:35:29 +00:00
Olivier Crête
0c54079af5 rtpmux: Re-push sticky events on input pad change 2012-12-16 16:35:29 +00:00
Olivier Crête
21831b430f rtpmux: Don't leak gvalue from iterator 2012-12-16 16:35:29 +00:00
Wim Taymans
ccc4b960fc rtpmux: more porting 2012-12-16 16:35:26 +00:00
Olivier Crête
f20a6b1d16 rtpmux: port to 0.11 2012-12-16 16:35:26 +00:00
Wim Taymans
35b6668fb6 rtpmux: make request pads take _%u 2012-12-16 16:35:22 +00:00
Olivier Crête
aa3607ef5c rtpdtmfmux: Add last-stop to dtmf-event upstream events 
Add the running time of the last outputted buffer to the
upstream "dtmf-event" events so that the dtmf source does not
leave a gap.
 2012-12-16 16:35:22 +00:00
Edward Hervey
d137482fe5 rtpmux: Remove dead assignments 2012-12-16 16:35:22 +00:00
Stefan Kost
55aae6bfab rtpmux: add missing G_PARAM_STATIC_STRINGS flags 
Canonicalize property names as needed.
 2012-12-16 16:35:15 +00:00
Olivier Crête
9674d5cc23 rtpmux: Improve documentation 
Add an example pipeline, and try to explain a bit more what it does.
 2012-12-16 16:35:15 +00:00
Stefan Kost
ca27a279ba rtpdtmfmux: remove unused variable 2012-12-16 16:35:15 +00:00
Stefan Kost
c85dceeacb rtpdtmfmux: remove unused signal boilerplate 2012-12-16 16:35:15 +00:00