Commit graph

45 commits

Author SHA1 Message Date
Tim-Philipp Müller
3b54dace2d tests: include config.h and don't include unix headers
In many cases the unistd.h includes weren't actually needed.

Preparation for making tests work on Windows with MSVC.
2017-11-24 13:41:20 +01:00
Stefan Sauer
9f2d7d2378 segment: update the tests
Boy scout rule. Make is a little less painful to debug the tests by using
fail_unless_equals_{uint64,int64,float} where appropriate. Ideally the large
tests would be splitted to avoid guessing data dependencies.
2017-10-20 17:28:11 +02:00
Seungha Yang
15f2898e87 segment: Modifiy inside segment condition
There is a special case that segment_start == segment_stop == start.
It's inside of segment

https://bugzilla.gnome.org/show_bug.cgi?id=764707
2017-01-31 15:55:12 +01:00
Vivia Nikolaidou
6ff8fdfc47 segment: Add _full variants of all stream/running_time from/to segment position functions
See formula clarifications in design docs for calculation details.

https://bugzilla.gnome.org/show_bug.cgi?id=756564
2015-10-23 15:50:38 +03:00
Vivia Nikolaidou
45f0f354ac segment: Correct stream_time calc for negative applied rate
Updated gst_segment_position_from_stream_time and gst_segment_to_stream_time to reflect correct calculations for the case when the applied rate is negative.

Pasting from design docs:

===============================
Stream time is calculated using the buffer times and the preceding SEGMENT
event as follows:

    stream_time = (B.timestamp - S.start) * ABS (S.applied_rate) + S.time

For negative rates, B.timestamp will go backwards from S.stop to S.start,
making the stream time go backwards.
===============================

Therefore, the calculation for applied_rate < 0 should be:

    stream_time = (S.stop - B.timestamp) * ABS (S.applied_rate) + S.time

and the reverse:

    B.timestamp = S.stop - (stream_time - S.time) / ABS (S.applied_rate)

https://bugzilla.gnome.org/show_bug.cgi?id=756810
2015-10-20 10:43:07 +03:00
Sebastian Dröge
f7f8312812 segment: Convert function to macro in unit test to get proper line numbers on failures
https://bugzilla.gnome.org/show_bug.cgi?id=748316
2015-10-14 16:59:04 +03:00
Vivia Nikolaidou
44ba1565d9 segment: Replaced gst_segment_to_position with gst_segment_position_from_running_time
gst_segment_to_position might cause confusion, especially with the addition of
gst_segment_position_from_stream_time . Deprecated gst_segment_to_position
now, and replaced it with gst_segment_position_from_running_time.

Also added unit tests.
2015-09-26 00:00:08 +02:00
Vivia Nikolaidou
572c7c6b9a segment: Added unit tests for gst_segment_position_from_stream_time 2015-09-26 00:00:03 +02:00
Wim Taymans
bc282da83c segment: remove the bounds check from _to_running_time_full()
Do not do any checks for the start/stop in the new
gst_segment_to_running_time_full() method, we can let this be done by
the more capable gst_segment_clip() method. This allows us to remove the
enum of results and only return the sign of the calculated running-time.
We need to put the old clipping checks in the old
gst_segment_to_running_time() still because they work slightly
differently than the _clip methods.

See https://bugzilla.gnome.org/show_bug.cgi?id=740575
2015-03-20 09:00:47 +01:00
Wim Taymans
edf484ab6b segment: add option to disable clipping
Add a clip argument to gst_segment_to_running_time_full() to disable
the checks against the segment boundaries. This makes it possible to
generate an extrapolated running-time for timestamps outside of the
segment.

See https://bugzilla.gnome.org/show_bug.cgi?id=740575
2015-03-19 17:36:36 +01:00
Wim Taymans
8c8b3818e4 segment: add helper to get negative running-time
Add a helper method to get a running-time with a little more features
such as detecting if the value was before or after the segment and
negative running-time.

API: gst_segment_to_running_time_full()

Fixes https://bugzilla.gnome.org/show_bug.cgi?id=740575
2015-03-18 11:35:42 +01:00
Wim Taymans
6e67ad7675 segment: fix offset handling with non 0 start
The position in the segment is relative to the start but the offset
isn't, so subtract the start from the position when setting the offset.
Add unit test for this as well.
2015-03-18 11:35:42 +01:00
Wim Taymans
6c95262447 tests: improve check, also check stream-time 2014-01-08 15:47:10 +01:00
Wim Taymans
b5e4e24e75 tests: add unit test for segment _offset_running_time()
Add a unit test to check that positive and negative offsets are applied
correctly in various cases.
2014-01-08 15:31:28 +01:00
Sebastian Rasmussen
e8ecf3c407 Fix some typos in code comments and debug messages
https://bugzilla.gnome.org/show_bug.cgi?id=720029
2013-12-07 17:09:39 +00:00
Tim-Philipp Müller
666c8c11c6 Fix FSF address
https://bugzilla.gnome.org/show_bug.cgi?id=687520
2012-11-03 20:44:48 +00:00
Wim Taymans
c8840b8270 segment: add offset field
Add an offset field that is used to track at what position the segment was
updated. This is used to set the running time to 0 when we do a flushing
seek that doesn't update the position.

See https://bugzilla.gnome.org/show_bug.cgi?id=680306
2012-07-27 17:09:45 +02:00
Wim Taymans
dbb6d68999 tests: improve segment tests 2012-07-27 12:24:03 +02:00
Wim Taymans
60382cd994 tests: remove segment accumulation checks
Remove the checks because there is no more segment accumulation.
2012-07-27 12:17:28 +02:00
Wim Taymans
f2e05faaaf tests: fix useless segment test 2012-02-20 14:42:11 +01:00
Wim Taymans
6da5841d0a tests: fix segment check 2011-10-28 16:23:49 +02:00
Wim Taymans
7b8b93ad64 tests: fix tests
Remove the tests that handle incompatible formats, we don't want that anymore.
2011-05-17 17:53:00 +02:00
Wim Taymans
bdbc069348 Rework GstSegment handling
Improve GstSegment, rename some fields. The idea is to have the GstSegment
structure represent the timing structure of the buffers as they are generated by
the source or demuxer element.
gst_segment_set_seek() -> gst_segment_do_seek()
Rename the NEWSEGMENT event to SEGMENT.
Make parsing of the SEGMENT event into a GstSegment structure.
Pass a GstSegment structure when making a new SEGMENT event. This allows us to
pass the timing info directly to the next element. No accumulation is needed in
the receiving element, all the info is inside the element.
Remove gst_segment_set_newsegment(): This function as used to accumulate
segments received from upstream, which is now not needed anymore because the
segment event contains the complete timing information.
2011-05-16 11:37:52 +02:00
Wim Taymans
c07b57fc05 segment: remove _full version
Rename the _full versions of the functions to the normal function names.
2011-05-09 17:51:07 +02:00
Sebastian Dröge
276a55fd24 gstsegment: Actually start==stop==segment_start is inside the segment
Still the old code was wrong as it claimed that start==stop<segment_start
would be inside the segment and returned insane clipping differences.
2009-08-11 13:21:35 +02:00
Sebastian Dröge
868538945b gstsegment: Fix unit test and add an additional test
The previous test assumed that start=stop=segment_start will
be inside the segment but this is wrong.
2009-08-11 13:03:03 +02:00
Wim Taymans
0e74bfe248 segment: add gst_segment_set_running_time
Added new method for closing the segment to a specific running time.

API: GstSegment::gst_segment_set_running_time()
2009-06-04 12:53:20 +02:00
Wim Taymans
92984a116b segment: add method for converting to position
Add gst_segment_to_position() that converts a running_time to a position in the
segment. A faulty variant of this function is currently used in inputselector
but we'll need it for frame stepping too.

API: GstSegment::gst_segment_to_position()
2009-06-03 19:06:30 +02:00
Wim Taymans
d2e5ffde24 gst/gstsegment.c: Set the last_stop to a more meaningful position when configuring the segment. ie. the start/stop of...
Original commit message from CVS:
* gst/gstsegment.c: (gst_segment_set_newsegment_full):
Set the last_stop to a more meaningful position when configuring the
segment. ie. the start/stop of the segment or clipped against the
updated segment boundaries.
* tests/check/gst/gstsegment.c: (GST_START_TEST):
Add some unit tests for the last_stop.
2008-10-23 09:49:07 +00:00
Tim-Philipp Müller
077450a434 No, let's not use g_slice_{dup|copy} here, since they only exist since GLib 2.14 and we still depend only on >= 2.12....
Original commit message from CVS:
* gst/gstsegment.c:
* tests/check/gst/gstsegment.c:
No, let's not use g_slice_{dup|copy} here, since they only exist
since GLib 2.14 and we still depend only on >= 2.12. Also add
unit test for gst_segment_copy().
2008-05-09 20:48:24 +00:00
Sebastian Dröge
58cc2ede0a And correct even more valid sparse warnings.
Original commit message from CVS:
* gst/gstelementfactory.h:
* tests/check/elements/fakesink.c:
* tests/check/elements/fakesrc.c: (setup_fakesrc):
* tests/check/elements/fdsrc.c: (setup_fdsrc):
* tests/check/elements/filesink.c: (setup_filesink):
* tests/check/elements/filesrc.c: (setup_filesrc):
* tests/check/elements/identity.c: (setup_identity):
* tests/check/elements/tee.c:
* tests/check/generic/sinks.c:
* tests/check/generic/states.c: (setup), (teardown):
* tests/check/gst/gst.c:
* tests/check/gst/gstabi.c:
* tests/check/gst/gstbin.c:
* tests/check/gst/gstbus.c: (pull_messages):
* tests/check/gst/gstcaps.c:
* tests/check/gst/gstelement.c:
* tests/check/gst/gstevent.c:
* tests/check/gst/gstghostpad.c:
* tests/check/gst/gstiterator.c:
* tests/check/gst/gstmessage.c:
* tests/check/gst/gstminiobject.c: (my_foo_init):
* tests/check/gst/gstobject.c: (thread_name_object),
(gst_object_suite):
* tests/check/gst/gstpad.c:
* tests/check/gst/gstplugin.c:
* tests/check/gst/gstpoll.c:
* tests/check/gst/gstquery.c:
* tests/check/gst/gstsegment.c:
* tests/check/gst/gststructure.c:
* tests/check/gst/gstsystemclock.c:
* tests/check/gst/gsttask.c:
* tests/check/gst/gstutils.c:
* tests/check/gst/gstvalue.c:
* tests/check/gst/struct_hppa.h:
* tests/check/gst/struct_i386.h:
* tests/check/gst/struct_ppc32.h:
* tests/check/gst/struct_ppc64.h:
* tests/check/gst/struct_x86_64.h:
* tests/check/libs/adapter.c: (create_and_fill_adapter):
* tests/check/libs/basesrc.c:
* tests/check/libs/controller.c: (GST_START_TEST):
* tests/check/libs/gdp.c:
* tests/check/libs/gstnetclientclock.c:
* tests/check/libs/gstnettimeprovider.c:
* tests/check/libs/libsabi.c:
* tests/check/libs/struct_hppa.h:
* tests/check/libs/struct_i386.h:
* tests/check/libs/struct_ppc32.h:
* tests/check/libs/struct_ppc64.h:
* tests/check/libs/struct_x86_64.h:
* tests/check/pipelines/cleanup.c:
* tests/check/pipelines/simple-launch-lines.c:
* tests/check/pipelines/stress.c:
And correct even more valid sparse warnings.
* win32/common/libgstreamer.def:
Add gst_poll_fd_init to the list of symbols.
2008-02-29 13:59:24 +00:00
Wim Taymans
a332964e6c docs/design/part-synchronisation.txt: Small updates.
Original commit message from CVS:
* docs/design/part-synchronisation.txt:
Small updates.
* gst/gstsegment.c: (gst_segment_set_seek),
(gst_segment_set_newsegment_full), (gst_segment_to_stream_time),
(gst_segment_to_running_time):
The seek format can be different from the segment format when the start
and stop values are not to be updated, when we only do a rate change for
example.
* tests/check/gst/gstsegment.c: (GST_START_TEST),
(gst_segment_suite):
Add a testcase for the rate-only seeks, checking that the format is
correctly ignored when start and stop are not updated.
2007-12-19 12:48:18 +00:00
Wim Taymans
c28238d8fe gst/gstsegment.c: Also accumulate time correctly when doing reverse playback. Fixes #488201,
Original commit message from CVS:
* gst/gstsegment.c: (gst_segment_set_newsegment_full),
(gst_segment_to_stream_time), (gst_segment_to_running_time):
Also accumulate time correctly when doing reverse playback. Fixes
#488201,
When converting to running and stream time, use default values for
start/stop/time/accum when comparing different formats. Fixes #494245.
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times):
Do running/stream time in TIME format.
* tests/check/gst/gstsegment.c: (GST_START_TEST),
(gst_segment_suite):
2 new unit tests for segment accumulation.
2007-11-09 11:56:41 +00:00
Wim Taymans
e683477828 tests/check/gst/gstsegment.c: Fix check
Original commit message from CVS:
* tests/check/gst/gstsegment.c: (GST_START_TEST):
Fix check
2007-02-13 15:51:00 +00:00
Edward Hervey
f65a1d384e gst/gstsegment.c: Fine tune the cases where the segment start/stop values are really updated.
Original commit message from CVS:
* gst/gstsegment.c: (gst_segment_set_seek):
Fine tune the cases where the segment start/stop values are really
updated.
* tests/check/gst/gstsegment.c: (GST_START_TEST):
Add tests for the return values of gst_segment_set_seek().
2006-12-19 12:38:00 +00:00
Wim Taymans
f830f6f4ac gst/gstsegment.c: Fix boundary checking in to_running_time() and to_stream_time().
Original commit message from CVS:
* gst/gstsegment.c: (gst_segment_set_seek),
(gst_segment_set_newsegment_full), (gst_segment_to_stream_time),
(gst_segment_to_running_time):
Fix boundary checking in to_running_time() and to_stream_time().
Fixes #377183.
* tests/check/gst/gstsegment.c: (GST_START_TEST):
stream and running time can now be calculated for the complete
clipped segment.
2006-11-20 10:27:49 +00:00
Wim Taymans
0a53651b1f gst/gstevent.c: Rename some more @cur to @start to fix docs.
Original commit message from CVS:
* gst/gstevent.c: (gst_event_new_seek), (gst_event_parse_seek):
Rename some more @cur to @start to fix docs.
* gst/gstsegment.c: (gst_segment_set_seek):
Fix typo.
time and start must always stay in sync as defined in design doc.
* gst/gsttaglist.c: (gst_tag_list_is_empty):
Rename param to fix docs.
* tests/check/gst/gstsegment.c: (GST_START_TEST):
Check that start and time are in sync.
* tests/check/pipelines/parse-launch.c:
(gst_parse_test_element_change_state):
Activate pad before adding to the element.
2006-10-09 17:15:39 +00:00
Wim Taymans
89814eed61 docs/design/part-qos.txt: Fix typo.
Original commit message from CVS:
* docs/design/part-qos.txt:
Fix typo.
* gst/gstevent.c:
* gst/gstevent.h:
Update seek event docs regarding negative rates.
Rename @cur to @start.
* gst/gstsegment.c: (gst_segment_set_seek):
* gst/gstsegment.h:
Update set_seek docs regarding negative rates.
Correctly update last_stop to @stop when dealing with negative
rates.
Rename @cur to @start.
* tests/check/gst/gstpad.c: (GST_START_TEST):
Activate pads before trying to use them.
* tests/check/gst/gstsegment.c: (GST_START_TEST),
(gst_segment_suite):
Add simple check for segments and negative rates.
2006-10-09 16:33:29 +00:00
Wim Taymans
bb634398b7 gst/: Small cleanups in docs and code.
Original commit message from CVS:
* gst/gstobject.c: (gst_object_set_parent):
* gst/gstpipeline.c: (do_pipeline_seek):
Small cleanups in docs and code.
* gst/gstsegment.c: (gst_segment_clip):
* tests/check/gst/gstsegment.c: (GST_START_TEST):
if stop == start and start is in the segment, no clipping should be
done. Also add a test for this.
2006-09-15 08:43:44 +00:00
Thomas Vander Stichele
64086e2970 tests/check/: use the new macro
Original commit message from CVS:
* tests/check/elements/fakesink.c:
* tests/check/elements/fakesrc.c:
* tests/check/elements/fdsrc.c:
* tests/check/elements/identity.c:
* tests/check/generic/sinks.c: (gst_sinks_suite):
* tests/check/generic/states.c:
* tests/check/gst/gst.c:
* tests/check/gst/gstabi.c:
* tests/check/gst/gstbin.c:
* tests/check/gst/gstbuffer.c: (gst_buffer_suite):
* tests/check/gst/gstbus.c: (gst_bus_suite):
* tests/check/gst/gstcaps.c: (GST_START_TEST):
* tests/check/gst/gstelement.c:
* tests/check/gst/gstevent.c: (gst_event_suite):
* tests/check/gst/gstghostpad.c:
* tests/check/gst/gstiterator.c: (gst_iterator_suite):
* tests/check/gst/gstmessage.c: (gst_message_suite):
* tests/check/gst/gstminiobject.c:
* tests/check/gst/gstobject.c:
* tests/check/gst/gstpad.c:
* tests/check/gst/gstpipeline.c:
* tests/check/gst/gstplugin.c:
* tests/check/gst/gstquery.c: (gst_query_suite):
* tests/check/gst/gstsegment.c: (gst_segment_suite):
* tests/check/gst/gststructure.c:
* tests/check/gst/gstsystemclock.c:
* tests/check/gst/gsttag.c:
* tests/check/gst/gsttask.c: (gst_task_suite):
* tests/check/gst/gstutils.c:
* tests/check/gst/gstvalue.c:
* tests/check/libs/adapter.c:
* tests/check/libs/basesrc.c:
* tests/check/libs/collectpads.c:
* tests/check/libs/controller.c:
* tests/check/libs/gdp.c: (gst_dp_suite):
* tests/check/libs/gstnetclientclock.c:
* tests/check/libs/gstnettimeprovider.c:
* tests/check/libs/libsabi.c: (libsabi_suite):
* tests/check/libs/typefindhelper.c:
* tests/check/pipelines/cleanup.c:
* tests/check/pipelines/parse-launch.c:
* tests/check/pipelines/simple-launch-lines.c:
* tests/check/pipelines/stress.c: (stress_suite):
use the new macro
2006-07-01 20:56:56 +00:00
Wim Taymans
b9dbb55105 docs/design/part-overview.txt: Make upsteam/downstream concepts more clear.
Original commit message from CVS:
* docs/design/part-overview.txt:
Make upsteam/downstream concepts more clear.
Give an example of serialized/non-serialized events.
* docs/design/part-events.txt:
* docs/design/part-streams.txt:
Mention applied_rate.
* docs/design/part-trickmodes.txt:
Mention applied rate, flesh out some more use cases.
* gst/gstevent.c: (gst_event_new_new_segment),
(gst_event_parse_new_segment), (gst_event_new_new_segment_full),
(gst_event_parse_new_segment_full), (gst_event_new_tag),
(gst_event_parse_tag), (gst_event_new_buffer_size),
(gst_event_parse_buffer_size), (gst_event_new_qos),
(gst_event_parse_qos), (gst_event_parse_seek),
(gst_event_new_navigation):
* gst/gstevent.h:
Add applied_rate field to NEWSEGMENT event.
API: gst_event_new_new_segment_full()
API: gst_event_parse_new_segment_full()
* gst/gstsegment.c: (gst_segment_init), (gst_segment_set_seek),
(gst_segment_set_newsegment), (gst_segment_set_newsegment_full),
(gst_segment_to_stream_time), (gst_segment_to_running_time):
* gst/gstsegment.h:
Add applied_rate to GstSegment structure.
Make calculation of stream_time and running_time more correct
wrt rate/applied_rate.
Add some more docs.
API: GstSegment::applied_rate field
API: gst_segment_set_newsegment_full();
* libs/gst/base/gstbasesink.c: (gst_base_sink_configure_segment),
(gst_base_sink_get_sync_times), (gst_base_sink_get_position):
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc),
(gst_base_transform_handle_buffer):
Parse and use applied_rate in the GstSegment field.
* tests/check/gst/gstevent.c: (GST_START_TEST):
Add check for applied_rate field.
* tests/check/gst/gstsegment.c: (GST_START_TEST),
(gstsegments_suite):
Add more checks for various GstSegment operations.
2006-05-08 09:52:33 +00:00
Wim Taymans
8666c1597d gst/gstsegment.c: Added more documentation.
Original commit message from CVS:
* gst/gstsegment.c: (gst_segment_init),
(gst_segment_set_last_stop), (gst_segment_set_seek),
(gst_segment_set_newsegment), (gst_segment_to_stream_time),
(gst_segment_to_running_time):
Added more documentation.
Make sure the last_pos value is updated properly.
Make sure to_stream_time and to_running_time don't
operate on wrong values.

* tests/check/gst/gstsegment.c: (GST_START_TEST):
Update check.
2005-12-12 12:48:35 +00:00
Wim Taymans
a35882df1f More segment updates, replace code in plugins with segment helper functions.
Original commit message from CVS:
* check/gst/gstsegment.c: (GST_START_TEST):
* docs/design/part-TODO.txt:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_event), (gst_base_sink_do_sync),
(gst_base_sink_activate_pull), (gst_base_sink_get_position),
(gst_base_sink_query), (gst_base_sink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasesrc.c: (gst_base_src_init), (gst_base_src_query),
(gst_base_src_default_newsegment),
(gst_base_src_configure_segment), (gst_base_src_do_seek),
(gst_base_src_get_range), (gst_base_src_loop),
(gst_base_src_change_state):
* gst/base/gstbasesrc.h:
* gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buf),
(gst_base_transform_event), (gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/base/gstcollectpads.c: (gst_collect_pads_add_pad),
(gst_collect_pads_event):
* gst/base/gstcollectpads.h:
* gst/elements/gstfakesrc.c: (gst_fake_src_init),
(gst_fake_src_create):
* gst/elements/gstfakesrc.h:
* gst/elements/gstidentity.c: (gst_identity_transform_ip):
* gst/gstsegment.c: (gst_segment_init), (gst_segment_set_duration),
(gst_segment_set_last_stop), (gst_segment_set_seek),
(gst_segment_set_newsegment), (gst_segment_to_stream_time),
(gst_segment_to_running_time), (gst_segment_clip):
* gst/gstsegment.h:
More segment updates, replace code in plugins with segment
helper functions.
2005-11-21 17:09:45 +00:00
Wim Taymans
29ea4a0bb0 More segment updates and more checks.
Original commit message from CVS:
* check/gst/gstsegment.c: (GST_START_TEST), (gstsegments_suite),
(main):
* gst/gstsegment.c: (gst_segment_init), (gst_segment_set_duration),
(gst_segment_set_last_stop), (gst_segment_set_seek),
(gst_segment_set_newsegment), (gst_segment_to_stream_time),
(gst_segment_to_running_time), (gst_segment_clip):
* gst/gstsegment.h:
More segment updates and more checks.
2005-11-21 13:26:51 +00:00
Wim Taymans
2754334f05 Added segment helper structure and methods. Not fully implemented yet.
Original commit message from CVS:
* check/Makefile.am:
* check/gst/gstsegment.c: (GST_START_TEST), (gstevents_suite),
(main):
* gst/Makefile.am:
* gst/gst.h:
* gst/gstsegment.c: (gst_segment_init), (gst_segment_set_duration),
(gst_segment_set_seek), (gst_segment_set_newsegment),
(gst_segment_to_stream_time), (gst_segment_to_running_time),
(gst_segment_clip):
* gst/gstsegment.h:
Added segment helper structure and methods. Not fully implemented
yet.
Added segment check.
2005-11-20 19:11:09 +00:00