Commit graph

117497 commits

Author SHA1 Message Date
Sebastian Dröge
030bf5e560 audio: Make GST_DSD_FORMAT_UNKNOWN -1 instead of 0xffffffff
0xffffffff is mapped to 2**32 - 1 but GLib enums are signed ints so this
value is out of range and causes problems with bindings.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4966>
2023-07-05 12:08:33 +00:00
Guillaume Desmottes
1027180960 subtitleoverlay: fix mutex error if sink caps is not video
We were trying to unlock a mutex that was not locked.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4964>
2023-07-05 10:34:21 +00:00
Jordan Petridis
1ef13dda12 pngenc: Allocate a single GstMemory per frame
Previously, we would create a new GstMemory per write operation
and then append them to the GstBuffer. This would cause a reallocation
every 16 Memories which is an issue since the png encoder will usually
do write in a pattern of 4, 8 and 8k bytes repeating until the frame
is done.

Instead allocate a single GstMemory and keep writting it into it
with a manual index. Much like the jpegenc does.

Doing some basic testing With a testsrc snow pattern at 4k and 8k
the same pipeline would take ~3.30s to encode a 4k frame and ~23s
for an 8k. At 4k 0.70s/33% is taken by memory allocations, while at
8k its ~10.5s/45%.

With this patch, at 4k the pipeline takes ~2.40s and at 8k only 9.60s
making this 28% and 58% faster accordingly on my laptop, and
allocation runtime is dropped to subsecond times.

Here's the test pipeline used, increase num-buffers in image freeze
to gather more samples.

```
gst-launch-1.0 videotestsrc num-buffers=1 pattern=snow ! imagefreeze num-buffers=1 ! \
  video/x-raw,width=7680,height=4320 ! pngenc ! fakesink
```

Close #2717

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4944>
2023-07-05 08:41:14 +00:00
Seungha Yang
794cde703c rtspsrc: Fix crash when is-live=false
The pad's parent (i.e., rtspsrc) can be nullptr since we add pads
later.

Co-authored-by: Jan Schmidt <jan@centricular.com>

Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2751
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4965>
2023-07-05 06:48:37 +00:00
Taruntej Kanakamalla
33bcbad782 lc3: add unit test
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4376>
2023-07-05 03:00:43 +00:00
Taruntej Kanakamalla
1865c87ec6 lc3: plugin for LC3 audio codec
lc3enc:
- encodes raw audio into lc3 format
- uses the default bitrate property and frame duration
from the caps to determine the byte count of
the encoded frames if it is not specified in
the downstream caps after negotiation
- uses the same byte count value for all the channels
- all the common session configuration parameters
are passed in the src caps

lc3dec:
- decodes an lc3 encoded audio
- sink caps should contain all the common session configuration
params
- uses frame_duration and frame_bytes (byte count) in the sink
caps as parameters along with sample rate and channel count
- byte count is same for all the channels

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4376>
2023-07-05 03:00:43 +00:00
Edward Hervey
711198a1a9 hlsdemux2: Ensure processed webvtt ends with empty new line
Parsers downstream will use empty new lines to detect where an entry
ends. Failure to have a newline would cause the entry to be either
discarded or (wrongly) concatenated with the next entry

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2752

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4963>
2023-07-04 10:57:01 +02:00
Edward Hervey
f825b7aba3 uridecodebin3: Refuse sub uri in gapless mode
This is too problematic to handle properly right now.

See https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2550 and
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2605

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4958>
2023-07-03 16:02:40 +02:00
Hou Qi
dbdbf2d256 decodebin3: fix memory leak when remove candidate decoder
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4955>
2023-07-03 07:13:13 +00:00
Carlos Rafael Giani
d5a9ca8ef6 gl: Separate viv direct texture checks from viv-fb winsys check
Vivante direct textures do not depend on the viv-fb windowing system.
Decouple these two to be able to use direct textures even when viv-fb
is not enabled.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4950>
2023-07-03 05:25:13 +00:00
Philippe Normand
d317379287 webrtcstats: Properly report IceCandidate type
strcmp returns a positive value if s1 is greater than s2, while we actually
needed to check equality here.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4952>
2023-07-03 03:51:53 +00:00
Jan Alexander Steffens (heftig)
565f9d18ae srt: Always format reject reason code
`srt_rejectreason_str` doesn't give us a unique string for every
possible reason. Peers can define their own reasons and SRT just gives
us the string `"Application-defined rejection reason"` for all of them.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4948>
2023-07-02 13:36:42 +00:00
Jan Schmidt
2e5908d33f appsrc: Release priv->lock before pushing segment
Don't hold the private appsrc lock while pushing out a segment
event, which may block indefinitely.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4951>
2023-06-30 16:05:57 +00:00
Jan Schmidt
0461103965 basesrc: Don't hold the object lock while pushing an event
Release the object lock before pushing a segment event.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4951>
2023-06-30 16:05:57 +00:00
Seungha Yang
1f18ceaf0f dwritesubtitlemux: Update object name
Add missing prefix `DWrite` so that this element can coexist with
subtitlemux proposed in
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4938

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4949>
2023-06-30 23:41:36 +09:00
Seungha Yang
8650c7a42a dwrite: Add support for non-d3d11/system memory
Attach meta if downstream supports it whatever the negotiated memory type is,
or just silently passthrough when meta is not supported

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4945>
2023-06-30 11:14:17 +00:00
Jonas Kvinge
fa46905aea discoverer: Only call handle_current_async if still processing
When gst_element_set_state is called in _setup_locked and errors, the
callback is already processed before we reach handle_current_async, and
the timer is started even though it's finished processing, which results
in a NULL pointer crash later in async_timeout_cb.

To fix this, we check that it's still processing before calling
handle_current_async.

Fixes #1683

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4936>
2023-06-30 08:52:38 +03:00
Thibault Saunier
c5304751ab uridecodebin: Handle non dynamic sources with several source pads
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4881>
2023-06-30 01:00:34 +00:00
Thibault Saunier
2b3757402b ges: Add support for gessrc as subtimeline element
Until now we have always had `gesdemux` as subtimeline elements,
the behavior when subtimelines are sources is different so we need
to support that.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4882>
2023-06-29 19:24:37 +00:00
Thibault Saunier
a5d5dd2ab4 ges: basebin: Handle removed tracks
Cleaning up the pads and elements linked to that track.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4882>
2023-06-29 19:24:37 +00:00
Thibault Saunier
a8b3e6122f gessrc: Remember the URI set by user
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4882>
2023-06-29 19:24:37 +00:00
Thibault Saunier
50393a809d gessrc: Remove timeline from self when disposing
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4882>
2023-06-29 19:24:37 +00:00
Arnaud Rebillout
56e636b60c examples: gtk: Add example to illustrate usage of accept-certificate with souphttpsrc
The aim of this example is to show how to make use of the accept-certificate
signal from a GTK GUI, and prompt user in case of invalid certificate.

There are two subtleties to be aware of:

1. the signal is emitted from the GStreamer streaming thread, therefore the
   caller can't modify the GUI straight away, instead they must do it from the
   main thread (eg. by using g_idle_add())

2. in case of a redirection, then a TLS failure, the caller won't know
   about the redirection. Actually, it's possible to be notified of the
   redirection by watching "message:element" and inspecting http-headers,
   but even in that case, the signal will be received *after* the signal
   "accept-certificate" (even though the redirection happened *before*).

This second point is tricky. It's not uncommon to have servers that redirect
http requests to https. So errors of the type "HTTP -> HTTPS -> TLS error"
happen, and if the caller doesn't care about redirection, they might prompt
users with a message such as "TLS error for URL http://...", which wouldn't make
much sense.

This example shows how to handle that right, by connecting to the signal
"message:element", inspecting the http-headers, and in case of redirection,
updating the TLS error dialog to indicate that the request was redirected.

Here are a few examples of streams that exhibit TLS failure (at the time of
this commit, of course):
* https://radiolive.sanjavier.es:8443/stream: unknown-ca
* https://am981.ddns.net:9005/stream.ogg: unknown-ca
* http://stream.diazol.hu:7092/zene.mp3: redir then bad-identity
* https://streaming.fabrik.fm/izwi/echocast/audio/index.m3u8: unknown-ca
  (this one is a HLS stream)

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4925>
2023-06-29 16:27:31 +00:00
Arnaud Rebillout
c4cf06c017 souphttpsrc: forward accept-certificate signal from libsoup-3
With libsoup 2.x, it was possible to know when there was a TLS failure, as
libsoup provided the "special http status code" SOUP_STATUS_SSL_FAILED.

However these special codes were dropped with libsoup 3.x: now libsoup emits
the accept-certificate signal when there's a TLS failure.

This commit adds a signal "accept-certificate" to SoupHttpSrc, which is in fact
just about forwarding the signal from SoupMessage (which is, itself, forwarded
from GTlsConnection). Note that, in case of libsoup 2.x, the signal is never
emitted.

Fixes: #2379
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4925>
2023-06-29 16:27:31 +00:00
James Oliver
87c177567d rtspclientsink: add RTSP address pool for unicast UDP
Adds an address pool for rtspclientsink in order to allow the
"port-range" property to restrict the ports available for the RTSP
streams rather than always using the ephemeral port-range.

If a value is not provided to the "port-range" property, rtspclientsink
will select random ports from the ephemeral port-range as before.

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2606

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4828>
2023-06-29 11:33:58 +00:00
Peter Stensson
33fb3bfd60 rtpvp9pay: Only mark first outgoing packet as non delta-unit
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4937>
2023-06-29 09:48:41 +00:00
Peter Stensson
af43648bdf rtpvp8pay: Only mark first outgoing packet as non delta-unit
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4937>
2023-06-29 09:48:41 +00:00
Peter Stensson
fa4200a605 rtph264pay: Add unit tests verifying delta-unit flag
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4937>
2023-06-29 09:48:41 +00:00
Peter Stensson
b40b4ffb81 rtph265pay: Only mark first NAL as non delta-unit
When the input buffer contained multiple NAL's the second one would keep
the non delta-unit flag for a key frame.

The delta-unit flag will now be set per NAL when preparing the buffer
list to payload.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4937>
2023-06-29 09:48:41 +00:00
Seungha Yang
1c4de219e4 dwrite: Add dwritesubtitleoverlay element
Adding new subtitle overlay element. It's a bin which is wrapping
two internal elements dwritesubtitlemux and dwritetextoverlay.

* dwritesubtitlemux: A new internal element to aggregate subtitle
buffers and to attach the aggregated subtitle buffers on
video buffer as meta.
* dwritetextoverlay: Extracts/renders the subtitle meta and
discard the meta after rendering.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4934>
2023-06-28 20:15:31 +00:00
Seungha Yang
a1ca42ad66 dwritebaseoverlay: Fix color-font property get/set
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4934>
2023-06-28 20:15:31 +00:00
Seungha Yang
0091166a38 dwrite: Add dwritesubtitlemux element
dwrite plugin internal use and will be removed once it's added to -base

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4934>
2023-06-28 20:15:31 +00:00
Seungha Yang
fce6edd0f1 dwrite: Add GstDWriteSubtitleMeta
dwrite plugin internal use and will be removed once it's added to -base

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4934>
2023-06-28 20:15:30 +00:00
Mathieu Duponchelle
7445b73e76 rtpsession: expose timeout-inactive-sources property
In some situations it is not desirable to time out when no data is
received any longer, users can opt in to this behavior via a new
property.

The property is also exposed on rtpbin and sdpdemux

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4880>
2023-06-28 18:45:25 +00:00
Nicolas Dufresne
170dcd58db v4l2: Fix support for left and top padding
In the current implementation, we support for most pixel format left
and top padding by changing the offset in the video meta. Though, to
align driver bytesused to the offset, we recalculate the offset, which
removed the modification we did before.

Instead, save the plane size, and truncate the driver reported bytesused
to the expected size, which ensures that the offsets still match. This
should also fix issues were the buffer size ended up bigger then the
pool size due to driver introduced padding.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4920>
2023-06-28 01:56:05 +00:00
Seungha Yang
b18bd5ec2b d3d11bufferpool: Fix heavy CPU usage in case of fixed-size pool
There's no reason to release GstMemory manually at all.
If we do release GstMemory, corresponding GstBuffer will be
discarded by GstBufferPool baseclass because the size is changed
to zero.

Actual cause of heavy CPU usage in case of fixed-size pool
(i.e., decoder output buffer pool) and if we remove GstMemory from
GstBuffer is that GstBufferPool baseclass is doing busy wait in acquire_buffer()
for some reason. That needs to be investigated though, discarding
and re-alloc every GstBuffer is not ideal already.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4935>
2023-06-27 23:25:09 +00:00
Seungha Yang
9aa1d683a2 d3d11poolallocator: Initialize flush flag with TRUE
If it's not active state, it should return flushing from acquire
method

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4935>
2023-06-27 23:25:09 +00:00
Seungha Yang
43ee082189 dwritebaseoverlay: Forward downstream wanted min buffer size
Upstream element might want to know the min buffer size,
d3d11 decoders for example.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4929>
2023-06-27 13:23:07 +00:00
Seungha Yang
8838a670e0 dwrite: Remove unused values
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4929>
2023-06-27 13:23:07 +00:00
Seungha Yang
6cb41569e6 dwrite: Add support for closed caption overlay
Adding closed caption rendering feature to dwritetextoverlay
element.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4929>
2023-06-27 13:23:07 +00:00
Seungha Yang
713f74f4f9 dwrite: Import libcaption source code
Import the code from gst-plugins-rs
(origin is https://github.com/szatmary/libcaption)

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4929>
2023-06-27 13:23:07 +00:00
Seungha Yang
37c7c92c03 dwritetimeoverlay: Fix member variable initialization
Use GstBaseTransform::start() instead

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4929>
2023-06-27 13:23:07 +00:00
Alicia Boya García
8c628fa325 validate tests: include debugutilsbad to be able to use testsrcbin
Fixes test: validate.uridecodebin.expose_raw_pad_caps

testsrcbin (currently part of debugutilsbad) is an useful element for
validate tests.

validate.uridecodebin.expose_raw_pad_caps makes use of it.
Unfortunately, because validate tests with GStreamer only run with
whitelisted plugins and `debugutilsbad` wasn't in the whitelist, the
test was failing and being auto-skipped.

This patch adds debugutilsbad to the whitelists used by validate tests
in subprojects with a validate/meson.build.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4931>
2023-06-27 10:13:19 +00:00
Thibault Saunier
e7f13ede0f videoconvertscale: Remove the restriction on ANY memory
Our pad templates already expose ANY feature and the code supports that
case even if only for the passthrough, we should not disable that feature.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4733>
2023-06-27 08:17:33 +00:00
Matthieu Volat
d228b8d96f oss: add a GstDeviceProvider plugin
Based on Alsa's GstDeviceProvider structure, relies on sndstat
file for OSS device enumeration but uses already existing utils
to query caps and names.

Reviewed and thanks to @slomo

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4879>
2023-06-27 09:34:33 +03:00
Víctor Manuel Jáquez Leal
e5d524b338 caps: Fix documentation
Fix gst_caps_filter_and_map_in_place() documentation, aiming to
gst_caps_maps_in_place() to express their difference.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4933>
2023-06-26 19:56:55 +02:00
He Junyan
a10e05000d video-info-dma: add gst_video_info_dma_drm_to_video_info()
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4883>
2023-06-26 16:18:24 +00:00
He Junyan
6accb7a1f5 va: Only change video format in gst_va_video_info_from_dma_info()
The current way of using gst_video_info_set_format() will change all
fields of the GstVideoInfo. We only need to change its format, stride
and offset fields.

In order to keep the consistency with th common drm API, we rename the
gst_va_video_info_from_dma_info() into gst_va_dma_drm_info_to_video_info().

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4883>
2023-06-26 16:18:23 +00:00
Alicia Boya García
e92dea5ce6 validate: Fix warning when importing GstPbutils
PyGObject triggers warnings when importing modules without an explicit
version request.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4932>
2023-06-26 12:34:56 +00:00
Stéphane Cerveau
53e48ce14d va: use GstH264Level enum in _va_h264_level_limits
The 1B value has been changed to 9 instead of 11 in the list
of level limits.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4737>
2023-06-26 10:47:36 +00:00