baseparse: refactor passthrough into format flags

Also add a format flag to signal baseparse that subclass/format can provide
(parsed) timestamp rather than an estimated one.  In particular, such "strong"
timestamp then allows to e.g. determine duration.
This commit is contained in:
Mark Nauwelaerts 2011-01-10 16:56:36 +01:00
parent 1c89488c50
commit 6a45c4f65e
4 changed files with 58 additions and 25 deletions

View file

@ -267,7 +267,8 @@ gst_aacparse_sink_setcaps (GstBaseParse * parse, GstCaps * caps)
/* arrange for metadata and get out of the way */
gst_aacparse_set_src_caps (aacparse, caps);
gst_base_parse_set_passthrough (parse, TRUE);
gst_base_parse_set_format (parse,
GST_BASE_PARSE_FORMAT_PASSTHROUGH, TRUE);
} else
return FALSE;
@ -542,7 +543,8 @@ gst_aacparse_detect_stream (GstAacParse * aacparse,
/* arrange for metadata and get out of the way */
gst_aacparse_set_src_caps (aacparse,
GST_PAD_CAPS (GST_BASE_PARSE_SINK_PAD (aacparse)));
gst_base_parse_set_passthrough (GST_BASE_PARSE (aacparse), TRUE);
gst_base_parse_set_format (GST_BASE_PARSE (aacparse),
GST_BASE_PARSE_FORMAT_PASSTHROUGH, TRUE);
*framesize = avail;
return TRUE;
@ -693,7 +695,6 @@ gst_aacparse_start (GstBaseParse * parse)
aacparse = GST_AACPARSE (parse);
GST_DEBUG ("start");
gst_base_parse_set_min_frame_size (GST_BASE_PARSE (aacparse), 1024);
gst_base_parse_set_passthrough (parse, FALSE);
return TRUE;
}

View file

@ -158,7 +158,7 @@
* Update the duration information with @gst_base_parse_set_duration
* </para></listitem>
* <listitem><para>
* Optionally passthrough using @gst_base_parse_set_passthrough
* Optionally passthrough using @gst_base_parse_set_format
* </para></listitem>
* <listitem><para>
* Configure various baseparse parameters using @gst_base_parse_set_seek and
@ -220,7 +220,7 @@ struct _GstBaseParsePrivate
gint64 estimated_duration;
guint min_frame_size;
gboolean passthrough;
guint format;
guint fps_num, fps_den;
guint update_interval;
guint bitrate;
@ -294,6 +294,12 @@ typedef struct _GstBaseParseSeek
GstClockTime start_ts;
} GstBaseParseSeek;
#define GST_BASE_PARSE_PASSTHROUGH(parse) \
(parse->priv->format & GST_BASE_PARSE_FORMAT_PASSTHROUGH)
#define GST_BASE_PARSE_HAS_TIME(parse) \
(parse->priv->format & GST_BASE_PARSE_FORMAT_HAS_TIME)
static GstElementClass *parent_class = NULL;
static void gst_base_parse_class_init (GstBaseParseClass * klass);
@ -571,7 +577,7 @@ gst_base_parse_reset (GstBaseParse * parse)
parse->priv->first_frame_offset = -1;
parse->priv->estimated_duration = -1;
parse->priv->next_ts = 0;
parse->priv->passthrough = FALSE;
parse->priv->format = 0;
parse->priv->post_min_bitrate = TRUE;
parse->priv->post_avg_bitrate = TRUE;
parse->priv->post_max_bitrate = TRUE;
@ -1471,10 +1477,11 @@ gst_base_parse_handle_and_push_frame (GstBaseParse * parse,
/* subclass must play nice */
g_return_val_if_fail (buffer != NULL, GST_FLOW_ERROR);
/* check initial frame to determine if subclass/format can provide ts.
/* check if subclass/format can provide ts.
* If so, that allows and enables extra seek and duration determining options */
if (G_UNLIKELY (parse->priv->first_frame_offset < 0 && ret == GST_FLOW_OK)) {
if (GST_BUFFER_TIMESTAMP_IS_VALID (buffer) &&
GST_BASE_PARSE_HAS_TIME (parse) &&
parse->priv->pad_mode == GST_ACTIVATE_PULL) {
parse->priv->first_frame_offset = offset;
parse->priv->first_frame_ts = GST_BUFFER_TIMESTAMP (buffer);
@ -1583,7 +1590,7 @@ gst_base_parse_push_frame (GstBaseParse * parse, GstBaseParseFrame * frame)
g_return_val_if_fail (GST_PAD_CAPS (parse->srcpad), GST_FLOW_ERROR);
/* segment adjustment magic; only if we are running the whole show */
if (!parse->priv->passthrough && parse->segment.rate > 0.0 &&
if (!GST_BASE_PARSE_PASSTHROUGH (parse) && parse->segment.rate > 0.0 &&
(parse->priv->pad_mode == GST_ACTIVATE_PULL ||
parse->priv->upstream_seekable)) {
/* segment times are typically estimates,
@ -1748,7 +1755,7 @@ gst_base_parse_push_frame (GstBaseParse * parse, GstBaseParseFrame * frame)
GST_BUFFER_SIZE (buffer), gst_flow_get_name (ret));
/* if we are not sufficiently in control, let upstream decide on EOS */
if (ret == GST_FLOW_UNEXPECTED &&
(parse->priv->passthrough ||
(GST_BASE_PARSE_PASSTHROUGH (parse) ||
(parse->priv->pad_mode == GST_ACTIVATE_PUSH &&
!parse->priv->upstream_seekable)))
ret = GST_FLOW_OK;
@ -1957,7 +1964,7 @@ gst_base_parse_chain (GstPad * pad, GstBuffer * buffer)
if (G_LIKELY (buffer)) {
GST_LOG_OBJECT (parse, "buffer size: %d, offset = %" G_GINT64_FORMAT,
GST_BUFFER_SIZE (buffer), GST_BUFFER_OFFSET (buffer));
if (G_UNLIKELY (parse->priv->passthrough)) {
if (G_UNLIKELY (GST_BASE_PARSE_PASSTHROUGH (parse))) {
frame->buffer = gst_buffer_make_metadata_writable (buffer);
return gst_base_parse_push_frame (parse, frame);
}
@ -2722,24 +2729,24 @@ gst_base_parse_set_min_frame_size (GstBaseParse * parse, guint min_size)
}
/**
* gst_base_parse_set_passthrough:
* @parse: the #GstBaseParse to set
* @passthrough: boolean indicating passthrough mode.
* gst_base_parse_set_format:
* @parse: the #GstBaseParseFormat to set or unset
* @flags: format flag to enable or disable
* @on: whether or not to enable
*
* Set passthrough mode for this parser (which only applies operating in pull
* mode). If operating in passthrough, incoming buffers are pushed through
* unmodified. That is, no @check_valid_frame or @parse_frame callbacks
* will be invoked. On the ohter hand, @pre_push_buffer is still invoked,
* where subclass can perform as much or as little is appropriate for
* "passthrough" semantics.
* Set flags describing characteristics of parsed format.
*/
void
gst_base_parse_set_passthrough (GstBaseParse * parse, gboolean passthrough)
gst_base_parse_set_format (GstBaseParse * parse, GstBaseParseFormat flag,
gboolean on)
{
g_return_if_fail (parse != NULL);
parse->priv->passthrough = passthrough;
GST_LOG_OBJECT (parse, "set passthrough: %d", passthrough);
GST_LOG_OBJECT (parse, "set flag %d to %d", flag, on);
if (on)
parse->priv->format |= flag;
else
parse->priv->format &= ~flag;
}
/**

View file

@ -163,12 +163,33 @@ typedef struct {
*/
#define GST_BASE_PARSE_FRAME_DRAIN(frame) (!!(frame->flags & GST_BASE_PARSE_FRAME_FLAG_DRAIN))
/**
* GstBaseParseFormat:
* @GST_BASE_PARSE_FORMAT_NONE: default setting
* @GST_BASE_PARSE_FORMAT_PASSTHROUGH: nature of format or configuration
* does not allow (much) parsing, so parser should operate in passthrough mode
* (which only applies operating in pull mode). That is, incoming buffers
* are pushed through unmodified, i.e. no @check_valid_frame or @parse_frame
* callbacks will be invoked. On the other hand, @pre_push_buffer is still invoked,
* where subclass can perform as much or as little is appropriate for
* "passthrough" semantics.
* @GST_BASE_PARSE_FORMAT_HAS_TIME: frames carry timing info which subclass
* can (generally) parse and provide. In particular, intrinsic time
* (rather than estimated) can be obtained following seek.
*
* Since: 0.10.x
*/
typedef enum _GstBaseParseFormat {
GST_BASE_PARSE_FORMAT_NONE = 0,
GST_BASE_PARSE_FORMAT_PASSTHROUGH = (1 << 0),
GST_BASE_PARSE_FORMAT_HAS_TIME = (1 << 1),
} GstBaseParseFormat;
/**
* GstBaseParseSeekable:
* @GST_BASE_PARSE_SEEK_NONE: No seeking possible.
* GST_BASE_PARSE_SEEK_DEFAULT: Default seeking possible using estimated bitrate.
* GST_BASE_PARSE_SEEK_TABLE: Additional metadata provides more accurate seeking.
* @GST_BASE_PARSE_SEEK_DEFAULT: Default seeking possible using estimated bitrate.
* @GST_BASE_PARSE_SEEK_TABLE: Additional metadata provides more accurate seeking.
*
* Indicates what level (of quality) of seeking is possible.
*
@ -317,7 +338,8 @@ void gst_base_parse_set_seek (GstBaseParse * parse,
void gst_base_parse_set_min_frame_size (GstBaseParse *parse, guint min_size);
void gst_base_parse_set_passthrough (GstBaseParse * parse, gboolean passthrough);
void gst_base_parse_set_format (GstBaseParse * parse, GstBaseParseFormat flag,
gboolean on);
void gst_base_parse_set_frame_props (GstBaseParse * parse, guint fps_num,
guint fps_den, guint lead_in, guint lead_out);

View file

@ -326,6 +326,9 @@ gst_flac_parse_start (GstBaseParse * parse)
/* "fLaC" marker */
gst_base_parse_set_min_frame_size (GST_BASE_PARSE (flacparse), 4);
/* inform baseclass we can come up with ts, based on counters in packets */
gst_base_parse_set_format (GST_BASE_PARSE (flacparse),
GST_BASE_PARSE_FORMAT_HAS_TIME, TRUE);
return TRUE;
}