gstreamer/docs/pwg/other-base.xml

311 lines
13 KiB
XML
Raw Normal View History

<chapter id="chapter-other-base" xreflabel="Pre-made base classes">
<title>Pre-made base classes</title>
<para>
So far, we've been looking at low-level concepts of creating any type of
&GStreamer; element. Now, let's assume that all you want is to create an
simple audiosink that works exactly the same as, say,
<quote>esdsink</quote>, or a filter that simply normalizes audio volume.
Such elements are very general in concept and since they do nothing
special, they should be easier to code than to provide your own scheduler
activation functions and doing complex caps negotiation. For this purpose,
&GStreamer; provides base classes that simplify some types of elements.
Those base classes will be discussed in this chapter.
</para>
<sect1 id="section-base-sink" xreflabel="Writing a sink">
<title>Writing a sink</title>
<para>
Sinks are special elements in &GStreamer;. This is because sink elements
have to take care of <emphasis>preroll</emphasis>, which is the process
that takes care that elements going into the
<classname>GST_STATE_PAUSED</classname> state will have buffers ready
after the state change. The result of this is that such elements can
start processing data immediately after going into the
<classname>GST_STATE_PLAYING</classname> state, without requiring to
take some time to initialize outputs or set up decoders; all that is done
already before the state-change to <classname>GST_STATE_PAUSED</classname>
successfully completes.
</para>
<para>
Preroll, however, is a complex process that would require the same
code in many elements. Therefore, sink elements can derive from the
<classname>GstBaseSink</classname> base-class, which does preroll and
a few other utility functions automatically. The derived class only
needs to implement a bunch of virtual functions and will work
automatically.
</para>
2012-10-01 09:24:52 +00:00
<para>
The base class implement much of the synchronization logic that a
sink has to perform.
</para>
<para>
The <classname>GstBaseSink</classname> base-class specifies some
limitations on elements, though:
</para>
<itemizedlist>
<listitem>
<para>
It requires that the sink only has one sinkpad. Sink elements that
2012-10-01 09:24:52 +00:00
need more than one sinkpad, must make a manager element with
multiple GstBaseSink elements inside.
</para>
</listitem>
</itemizedlist>
<para>
Sink elements can derive from <classname>GstBaseSink</classname> using
2012-09-28 11:24:52 +00:00
the usual <classname>GObject</classname> convenience macro
<function>G_DEFINE_TYPE ()</function>:
</para>
<programlisting>
2012-09-28 11:24:52 +00:00
G_DEFINE_TYPE (GstMySink, gst_my_sink, GST_TYPE_BASE_SINK);
[..]
static void
gst_my_sink_class_init (GstMySinkClass * klass)
{
klass->set_caps = [..];
klass->render = [..];
[..]
}
</programlisting>
<para>
The advantages of deriving from <classname>GstBaseSink</classname> are
numerous:
</para>
<itemizedlist>
<listitem>
<para>
Derived implementations barely need to be aware of preroll, and do
not need to know anything about the technical implementation
requirements of preroll. The base-class does all the hard work.
</para>
<para>
Less code to write in the derived class, shared code (and thus
shared bugfixes).
</para>
</listitem>
</itemizedlist>
<para>
There are also specialized base classes for audio and video, let's look
at those a bit.
</para>
<sect2 id="section-base-audiosink" xreflabel="Writing an audio sink">
<title>Writing an audio sink</title>
<para>
Essentially, audio sink implementations are just a special case of a
2012-10-01 09:24:52 +00:00
general sink. An audio sink has the added complexity that it needs to
schedule playback of samples. It must match the clock selected in the
pipeline against the clock of the audio device and calculate and
compensate for drift and jitter.
</para>
<para>
There are two audio base classes that you can choose to
derive from, depending on your needs:
2012-10-01 09:24:52 +00:00
<classname>GstAudioBasesink</classname> and
<classname>GstAudioSink</classname>. The audiobasesink provides full
control over how synchronization and scheduling is handled, by using
a ringbuffer that the derived class controls and provides. The
2012-10-01 09:24:52 +00:00
audiosink base-class is a derived class of the audiobasesink,
implementing a standard ringbuffer implementing default
synchronization and providing a standard audio-sample clock. Derived
classes of this base class merely need to provide a <function>_open
()</function>, <function>_close ()</function> and a <function>_write
()</function> function implementation, and some optional functions.
This should suffice for many sound-server output elements and even
most interfaces. More demanding audio systems, such as Jack, would
2012-10-01 09:24:52 +00:00
want to implement the <classname>GstAudioBaseSink</classname>
base-class.
</para>
<para>
2014-09-16 14:07:40 +00:00
The <classname>GstAudioBaseSink</classname> has little to no
limitations and should fit virtually every implementation, but is
hard to implement. The <classname>GstAudioSink</classname>, on the
other hand, only fits those systems with a simple <function>open
()</function> / <function>close ()</function> / <function>write
()</function> API (which practically means pretty much all of them),
but has the advantage that it is a lot easier to implement. The
benefits of this second base class are large:
</para>
<itemizedlist>
<listitem>
<para>
Automatic synchronization, without any code in the derived class.
</para>
</listitem>
<listitem>
<para>
Also automatically provides a clock, so that other sinks (e.g. in
case of audio/video playback) are synchronized.
</para>
</listitem>
<listitem>
<para>
Features can be added to all audiosinks by making a change in the
base class, which makes maintenance easy.
</para>
</listitem>
<listitem>
<para>
Derived classes require only three small functions, plus some
<classname>GObject</classname> boilerplate code.
</para>
</listitem>
</itemizedlist>
<para>
In addition to implementing the audio base-class virtual functions,
derived classes can (should) also implement the
<classname>GstBaseSink</classname> <function>set_caps ()</function> and
<function>get_caps ()</function> virtual functions for negotiation.
</para>
</sect2>
<sect2 id="section-base-videosink" xreflabel="Writing a general sink">
<title>Writing a video sink</title>
<para>
Writing a videosink can be done using the
<classname>GstVideoSink</classname> base-class, which derives from
<classname>GstBaseSink</classname> internally. Currently, it does
nothing yet but add another compile dependency, so derived classes
will need to implement all base-sink virtual functions. When they do
this correctly, this will have some positive effects on the end user
experience with the videosink:
</para>
<itemizedlist>
<listitem>
<para>
Because of preroll (and the <function>preroll ()</function> virtual
function), it is possible to display a video frame already when
going into the <classname>GST_STATE_PAUSED</classname> state.
</para>
</listitem>
<listitem>
<para>
By adding new features to <classname>GstVideoSink</classname>, it
will be possible to add extensions to videosinks that affect all of
them, but only need to be coded once, which is a huge maintenance
benefit.
</para>
</listitem>
</itemizedlist>
</sect2>
</sect1>
<sect1 id="section-base-src" xreflabel="Writing a source">
<title>Writing a source</title>
<para>
In the previous part, particularly <xref
linkend="section-scheduling-randomxs"/>, we have learned that some types
of elements can provide random access. This applies most definitely to
source elements reading from a randomly seekable location, such as file
sources. However, other source elements may be better described as a
live source element, such as a camera source, an audio card source and
such; those are not seekable and do not provide byte-exact access. For
all such use cases, &GStreamer; provides two base classes:
<classname>GstBaseSrc</classname> for the basic source functionality, and
<classname>GstPushSrc</classname>, which is a non-byte exact source
base-class. The pushsource base class itself derives from basesource as
well, and thus all statements about the basesource apply to the
pushsource, too.
</para>
<para>
The basesrc class does several things automatically for derived classes,
so they no longer have to worry about it:
</para>
<itemizedlist>
<listitem>
<para>
Fixes to <classname>GstBaseSrc</classname> apply to all derived
classes automatically.
</para>
</listitem>
<listitem>
<para>
Automatic pad activation handling, and task-wrapping in case we get
assigned to start a task ourselves.
</para>
</listitem>
</itemizedlist>
<para>
The <classname>GstBaseSrc</classname> may not be suitable for all cases,
though; it has limitations:
</para>
<itemizedlist>
<listitem>
<para>
There is one and only one sourcepad. Source elements requiring
2012-10-01 09:24:52 +00:00
multiple sourcepads must implement a manager bin and use multiple
source elements internally or make a manager element that uses
a source element and a demuxer inside.
</para>
</listitem>
</itemizedlist>
<para>
It is possible to use special memory, such as X server memory pointers
or <function>mmap ()</function>'ed memory areas, as data pointers in
buffers returned from the <function>create()</function> virtual function.
</para>
<sect2 id="section-base-audiosrc" xreflabel="Writing an audio source">
<title>Writing an audio source</title>
<para>
An audio source is nothing more but a special case of a pushsource.
Audio sources would be anything that reads audio, such as a source
reading from a soundserver, a kernel interface (such as ALSA) or a
test sound / signal generator. &GStreamer; provides two base classes,
similar to the two audiosinks described in <xref
linkend="section-base-audiosink"/>; one is ringbuffer-based, and
requires the derived class to take care of its own scheduling,
synchronization and such. The other is based on this
2012-10-01 09:24:52 +00:00
<classname>GstAudioBaseSrc</classname> and is called
<classname>GstAudioSrc</classname>, and provides a simple
<function>open ()</function>, <function>close ()</function> and
<function>read ()</function> interface, which is rather simple to
implement and will suffice for most soundserver sources and audio
interfaces (e.g. ALSA or OSS) out there.
</para>
<para>
The <classname>GstAudioSrc</classname> base-class has several benefits
for derived classes, on top of the benefits of the
<classname>GstPushSrc</classname> base-class that it is based on:
</para>
<itemizedlist>
<listitem>
<para>
Does syncronization and provides a clock.
</para>
</listitem>
<listitem>
<para>
New features can be added to it and will apply to all derived
classes automatically.
</para>
</listitem>
</itemizedlist>
</sect2>
</sect1>
<sect1 id="section-base-transform"
xreflabel="Writing a transformation element">
<title>Writing a transformation element</title>
<para>
A third base-class that &GStreamer; provides is the
<classname>GstBaseTransform</classname>. This is a base class for
elements with one sourcepad and one sinkpad which act as a filter
of some sort, such as volume changing, audio resampling, audio format
conversion, and so on and so on. There is quite a lot of bookkeeping
that such elements need to do in order for things such as buffer
allocation forwarding, passthrough, in-place processing and such to all
work correctly. This base class does all that for you, so that you just
need to do the actual processing.
</para>
<para>
Since the <classname>GstBaseTransform</classname> is based on the 1-to-1
model for filters, it may not apply well to elements such as decoders,
which may have to parse properties from the stream. Also, it will not
work for elements requiring more than one sourcepad or sinkpad.
</para>
</sect1>
</chapter>