gstreamer/subprojects/gst-plugins-bad/sys/nvcodec/gstcudascale.c

608 lines
22 KiB
C
Raw Normal View History

/* GStreamer
* Copyright (C) <1999> Erik Walthinsen <omega@cse.ogi.edu>
* Copyright (C) 2005-2012 David Schleef <ds@schleef.org>
* Copyright (C) <2019> Seungha Yang <seungha.yang@navercorp.com>
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Library General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the
* Free Software Foundation, Inc., 51 Franklin St, Fifth Floor,
* Boston, MA 02110-1301, USA.
*/
/**
* SECTION:element-cudascale
* @title: cudascale
* @see_also: cudaconvert
*
* This element resizes video frames. By default the element will try to
* negotiate to the same size on the source and sinkpad so that no scaling
* is needed. It is therefore safe to insert this element in a pipeline to
* get more robust behaviour without any cost if no scaling is needed.
*
* This element supports some YUV formats which are are also supported by
* nvidia encoders and decoders.
*
* ## Example pipelines
* |[
* gst-launch-1.0 -v filesrc location=videotestsrc.mp4 ! qtdemux ! h264parse ! nvh264dec ! cudaconvert ! cudascale ! cudaconvert ! cudadownload ! autovideosink
* ]|
* Decode a mp4/h264 and display the video. If the video sink chosen
* cannot perform scaling, the video scaling will be performed by cudascale
* |[
* gst-launch-1.0 -v filesrc location=videotestsrc.mp4 ! qtdemux ! h264parse ! nvh264dec ! cudaconvert ! cudascale ! cudaconvert ! cudadownload ! video/x-raw,width=100 ! autovideosink
* ]|
* Decode an mp4/h264 and display the video with a width of 100.
*
* Since: 1.20
*/
#ifdef HAVE_CONFIG_H
# include <config.h>
#endif
#include "gstcudascale.h"
#include "gstcudautils.h"
GST_DEBUG_CATEGORY_STATIC (gst_cuda_scale_debug);
#define GST_CAT_DEFAULT gst_cuda_scale_debug
#define gst_cuda_scale_parent_class parent_class
G_DEFINE_TYPE (GstCudaScale, gst_cuda_scale, GST_TYPE_CUDA_BASE_FILTER);
static GstCaps *gst_cuda_scale_transform_caps (GstBaseTransform * trans,
GstPadDirection direction, GstCaps * caps, GstCaps * filter);
static GstCaps *gst_cuda_scale_fixate_caps (GstBaseTransform * base,
GstPadDirection direction, GstCaps * caps, GstCaps * othercaps);
static gboolean gst_cuda_scale_set_info (GstCudaBaseTransform * filter,
GstCaps * incaps, GstVideoInfo * in_info, GstCaps * outcaps,
GstVideoInfo * out_info);
static void
gst_cuda_scale_class_init (GstCudaScaleClass * klass)
{
GstElementClass *element_class = GST_ELEMENT_CLASS (klass);
GstBaseTransformClass *trans_class = GST_BASE_TRANSFORM_CLASS (klass);
GstCudaBaseTransformClass *btrans_class =
GST_CUDA_BASE_TRANSFORM_CLASS (klass);
gst_element_class_set_static_metadata (element_class,
"CUDA Video scaler",
"Filter/Converter/Video/Scaler/Hardware",
"Resizes Video using CUDA", "Seungha Yang <seungha.yang@navercorp.com>");
trans_class->transform_caps =
GST_DEBUG_FUNCPTR (gst_cuda_scale_transform_caps);
trans_class->fixate_caps = GST_DEBUG_FUNCPTR (gst_cuda_scale_fixate_caps);
btrans_class->set_info = GST_DEBUG_FUNCPTR (gst_cuda_scale_set_info);
GST_DEBUG_CATEGORY_INIT (gst_cuda_scale_debug,
"cudascale", 0, "Video Resize using CUDA");
}
static void
gst_cuda_scale_init (GstCudaScale * cuda)
{
}
static GstCaps *
gst_cuda_scale_transform_caps (GstBaseTransform * trans,
GstPadDirection direction, GstCaps * caps, GstCaps * filter)
{
GstCaps *ret;
GstStructure *structure;
GstCapsFeatures *features;
gint i, n;
GST_DEBUG_OBJECT (trans,
"Transforming caps %" GST_PTR_FORMAT " in direction %s", caps,
(direction == GST_PAD_SINK) ? "sink" : "src");
ret = gst_caps_new_empty ();
n = gst_caps_get_size (caps);
for (i = 0; i < n; i++) {
structure = gst_caps_get_structure (caps, i);
features = gst_caps_get_features (caps, i);
/* If this is already expressed by the existing caps
* skip this structure */
if (i > 0 && gst_caps_is_subset_structure_full (ret, structure, features))
continue;
/* make copy */
structure = gst_structure_copy (structure);
gst_structure_set (structure, "width", GST_TYPE_INT_RANGE, 1, G_MAXINT,
"height", GST_TYPE_INT_RANGE, 1, G_MAXINT, NULL);
/* if pixel aspect ratio, make a range of it */
if (gst_structure_has_field (structure, "pixel-aspect-ratio")) {
gst_structure_set (structure, "pixel-aspect-ratio",
GST_TYPE_FRACTION_RANGE, 1, G_MAXINT, G_MAXINT, 1, NULL);
}
gst_caps_append_structure_full (ret, structure,
gst_caps_features_copy (features));
}
if (filter) {
GstCaps *intersection;
intersection =
gst_caps_intersect_full (filter, ret, GST_CAPS_INTERSECT_FIRST);
gst_caps_unref (ret);
ret = intersection;
}
GST_DEBUG_OBJECT (trans, "returning caps: %" GST_PTR_FORMAT, ret);
return ret;
}
/* fork of gstvideoscale */
static GstCaps *
gst_cuda_scale_fixate_caps (GstBaseTransform * base, GstPadDirection direction,
GstCaps * caps, GstCaps * othercaps)
{
GstStructure *ins, *outs;
const GValue *from_par, *to_par;
GValue fpar = { 0, }, tpar = {
0,};
othercaps = gst_caps_truncate (othercaps);
othercaps = gst_caps_make_writable (othercaps);
GST_DEBUG_OBJECT (base, "trying to fixate othercaps %" GST_PTR_FORMAT
" based on caps %" GST_PTR_FORMAT, othercaps, caps);
ins = gst_caps_get_structure (caps, 0);
outs = gst_caps_get_structure (othercaps, 0);
from_par = gst_structure_get_value (ins, "pixel-aspect-ratio");
to_par = gst_structure_get_value (outs, "pixel-aspect-ratio");
/* If we're fixating from the sinkpad we always set the PAR and
* assume that missing PAR on the sinkpad means 1/1 and
* missing PAR on the srcpad means undefined
*/
if (direction == GST_PAD_SINK) {
if (!from_par) {
g_value_init (&fpar, GST_TYPE_FRACTION);
gst_value_set_fraction (&fpar, 1, 1);
from_par = &fpar;
}
if (!to_par) {
g_value_init (&tpar, GST_TYPE_FRACTION_RANGE);
gst_value_set_fraction_range_full (&tpar, 1, G_MAXINT, G_MAXINT, 1);
to_par = &tpar;
}
} else {
if (!to_par) {
g_value_init (&tpar, GST_TYPE_FRACTION);
gst_value_set_fraction (&tpar, 1, 1);
to_par = &tpar;
gst_structure_set (outs, "pixel-aspect-ratio", GST_TYPE_FRACTION, 1, 1,
NULL);
}
if (!from_par) {
g_value_init (&fpar, GST_TYPE_FRACTION);
gst_value_set_fraction (&fpar, 1, 1);
from_par = &fpar;
}
}
/* we have both PAR but they might not be fixated */
{
gint from_w, from_h, from_par_n, from_par_d, to_par_n, to_par_d;
gint w = 0, h = 0;
gint from_dar_n, from_dar_d;
gint num, den;
/* from_par should be fixed */
g_return_val_if_fail (gst_value_is_fixed (from_par), othercaps);
from_par_n = gst_value_get_fraction_numerator (from_par);
from_par_d = gst_value_get_fraction_denominator (from_par);
gst_structure_get_int (ins, "width", &from_w);
gst_structure_get_int (ins, "height", &from_h);
gst_structure_get_int (outs, "width", &w);
gst_structure_get_int (outs, "height", &h);
/* if both width and height are already fixed, we can't do anything
* about it anymore */
if (w && h) {
guint n, d;
GST_DEBUG_OBJECT (base, "dimensions already set to %dx%d, not fixating",
w, h);
if (!gst_value_is_fixed (to_par)) {
if (gst_video_calculate_display_ratio (&n, &d, from_w, from_h,
from_par_n, from_par_d, w, h)) {
GST_DEBUG_OBJECT (base, "fixating to_par to %dx%d", n, d);
if (gst_structure_has_field (outs, "pixel-aspect-ratio"))
gst_structure_fixate_field_nearest_fraction (outs,
"pixel-aspect-ratio", n, d);
else if (n != d)
gst_structure_set (outs, "pixel-aspect-ratio", GST_TYPE_FRACTION,
n, d, NULL);
}
}
goto done;
}
/* Calculate input DAR */
if (!gst_util_fraction_multiply (from_w, from_h, from_par_n, from_par_d,
&from_dar_n, &from_dar_d)) {
GST_ELEMENT_ERROR (base, CORE, NEGOTIATION, (NULL),
("Error calculating the output scaled size - integer overflow"));
goto done;
}
GST_DEBUG_OBJECT (base, "Input DAR is %d/%d", from_dar_n, from_dar_d);
/* If either width or height are fixed there's not much we
* can do either except choosing a height or width and PAR
* that matches the DAR as good as possible
*/
if (h) {
GstStructure *tmp;
gint set_w, set_par_n, set_par_d;
GST_DEBUG_OBJECT (base, "height is fixed (%d)", h);
/* If the PAR is fixed too, there's not much to do
* except choosing the width that is nearest to the
* width with the same DAR */
if (gst_value_is_fixed (to_par)) {
to_par_n = gst_value_get_fraction_numerator (to_par);
to_par_d = gst_value_get_fraction_denominator (to_par);
GST_DEBUG_OBJECT (base, "PAR is fixed %d/%d", to_par_n, to_par_d);
if (!gst_util_fraction_multiply (from_dar_n, from_dar_d, to_par_d,
to_par_n, &num, &den)) {
GST_ELEMENT_ERROR (base, CORE, NEGOTIATION, (NULL),
("Error calculating the output scaled size - integer overflow"));
goto done;
}
w = (guint) gst_util_uint64_scale_int_round (h, num, den);
gst_structure_fixate_field_nearest_int (outs, "width", w);
goto done;
}
/* The PAR is not fixed and it's quite likely that we can set
* an arbitrary PAR. */
/* Check if we can keep the input width */
tmp = gst_structure_copy (outs);
gst_structure_fixate_field_nearest_int (tmp, "width", from_w);
gst_structure_get_int (tmp, "width", &set_w);
/* Might have failed but try to keep the DAR nonetheless by
* adjusting the PAR */
if (!gst_util_fraction_multiply (from_dar_n, from_dar_d, h, set_w,
&to_par_n, &to_par_d)) {
GST_ELEMENT_ERROR (base, CORE, NEGOTIATION, (NULL),
("Error calculating the output scaled size - integer overflow"));
gst_structure_free (tmp);
goto done;
}
if (!gst_structure_has_field (tmp, "pixel-aspect-ratio"))
gst_structure_set_value (tmp, "pixel-aspect-ratio", to_par);
gst_structure_fixate_field_nearest_fraction (tmp, "pixel-aspect-ratio",
to_par_n, to_par_d);
gst_structure_get_fraction (tmp, "pixel-aspect-ratio", &set_par_n,
&set_par_d);
gst_structure_free (tmp);
/* Check if the adjusted PAR is accepted */
if (set_par_n == to_par_n && set_par_d == to_par_d) {
if (gst_structure_has_field (outs, "pixel-aspect-ratio") ||
set_par_n != set_par_d)
gst_structure_set (outs, "width", G_TYPE_INT, set_w,
"pixel-aspect-ratio", GST_TYPE_FRACTION, set_par_n, set_par_d,
NULL);
goto done;
}
/* Otherwise scale the width to the new PAR and check if the
* adjusted with is accepted. If all that fails we can't keep
* the DAR */
if (!gst_util_fraction_multiply (from_dar_n, from_dar_d, set_par_d,
set_par_n, &num, &den)) {
GST_ELEMENT_ERROR (base, CORE, NEGOTIATION, (NULL),
("Error calculating the output scaled size - integer overflow"));
goto done;
}
w = (guint) gst_util_uint64_scale_int_round (h, num, den);
gst_structure_fixate_field_nearest_int (outs, "width", w);
if (gst_structure_has_field (outs, "pixel-aspect-ratio") ||
set_par_n != set_par_d)
gst_structure_set (outs, "pixel-aspect-ratio", GST_TYPE_FRACTION,
set_par_n, set_par_d, NULL);
goto done;
} else if (w) {
GstStructure *tmp;
gint set_h, set_par_n, set_par_d;
GST_DEBUG_OBJECT (base, "width is fixed (%d)", w);
/* If the PAR is fixed too, there's not much to do
* except choosing the height that is nearest to the
* height with the same DAR */
if (gst_value_is_fixed (to_par)) {
to_par_n = gst_value_get_fraction_numerator (to_par);
to_par_d = gst_value_get_fraction_denominator (to_par);
GST_DEBUG_OBJECT (base, "PAR is fixed %d/%d", to_par_n, to_par_d);
if (!gst_util_fraction_multiply (from_dar_n, from_dar_d, to_par_d,
to_par_n, &num, &den)) {
GST_ELEMENT_ERROR (base, CORE, NEGOTIATION, (NULL),
("Error calculating the output scaled size - integer overflow"));
goto done;
}
h = (guint) gst_util_uint64_scale_int_round (w, den, num);
gst_structure_fixate_field_nearest_int (outs, "height", h);
goto done;
}
/* The PAR is not fixed and it's quite likely that we can set
* an arbitrary PAR. */
/* Check if we can keep the input height */
tmp = gst_structure_copy (outs);
gst_structure_fixate_field_nearest_int (tmp, "height", from_h);
gst_structure_get_int (tmp, "height", &set_h);
/* Might have failed but try to keep the DAR nonetheless by
* adjusting the PAR */
if (!gst_util_fraction_multiply (from_dar_n, from_dar_d, set_h, w,
&to_par_n, &to_par_d)) {
GST_ELEMENT_ERROR (base, CORE, NEGOTIATION, (NULL),
("Error calculating the output scaled size - integer overflow"));
gst_structure_free (tmp);
goto done;
}
if (!gst_structure_has_field (tmp, "pixel-aspect-ratio"))
gst_structure_set_value (tmp, "pixel-aspect-ratio", to_par);
gst_structure_fixate_field_nearest_fraction (tmp, "pixel-aspect-ratio",
to_par_n, to_par_d);
gst_structure_get_fraction (tmp, "pixel-aspect-ratio", &set_par_n,
&set_par_d);
gst_structure_free (tmp);
/* Check if the adjusted PAR is accepted */
if (set_par_n == to_par_n && set_par_d == to_par_d) {
if (gst_structure_has_field (outs, "pixel-aspect-ratio") ||
set_par_n != set_par_d)
gst_structure_set (outs, "height", G_TYPE_INT, set_h,
"pixel-aspect-ratio", GST_TYPE_FRACTION, set_par_n, set_par_d,
NULL);
goto done;
}
/* Otherwise scale the height to the new PAR and check if the
* adjusted with is accepted. If all that fails we can't keep
* the DAR */
if (!gst_util_fraction_multiply (from_dar_n, from_dar_d, set_par_d,
set_par_n, &num, &den)) {
GST_ELEMENT_ERROR (base, CORE, NEGOTIATION, (NULL),
("Error calculating the output scaled size - integer overflow"));
goto done;
}
h = (guint) gst_util_uint64_scale_int_round (w, den, num);
gst_structure_fixate_field_nearest_int (outs, "height", h);
if (gst_structure_has_field (outs, "pixel-aspect-ratio") ||
set_par_n != set_par_d)
gst_structure_set (outs, "pixel-aspect-ratio", GST_TYPE_FRACTION,
set_par_n, set_par_d, NULL);
goto done;
} else if (gst_value_is_fixed (to_par)) {
GstStructure *tmp;
gint set_h, set_w, f_h, f_w;
to_par_n = gst_value_get_fraction_numerator (to_par);
to_par_d = gst_value_get_fraction_denominator (to_par);
/* Calculate scale factor for the PAR change */
if (!gst_util_fraction_multiply (from_dar_n, from_dar_d, to_par_n,
to_par_d, &num, &den)) {
GST_ELEMENT_ERROR (base, CORE, NEGOTIATION, (NULL),
("Error calculating the output scaled size - integer overflow"));
goto done;
}
/* Try to keep the input height (because of interlacing) */
tmp = gst_structure_copy (outs);
gst_structure_fixate_field_nearest_int (tmp, "height", from_h);
gst_structure_get_int (tmp, "height", &set_h);
/* This might have failed but try to scale the width
* to keep the DAR nonetheless */
w = (guint) gst_util_uint64_scale_int_round (set_h, num, den);
gst_structure_fixate_field_nearest_int (tmp, "width", w);
gst_structure_get_int (tmp, "width", &set_w);
gst_structure_free (tmp);
/* We kept the DAR and the height is nearest to the original height */
if (set_w == w) {
gst_structure_set (outs, "width", G_TYPE_INT, set_w, "height",
G_TYPE_INT, set_h, NULL);
goto done;
}
f_h = set_h;
f_w = set_w;
/* If the former failed, try to keep the input width at least */
tmp = gst_structure_copy (outs);
gst_structure_fixate_field_nearest_int (tmp, "width", from_w);
gst_structure_get_int (tmp, "width", &set_w);
/* This might have failed but try to scale the width
* to keep the DAR nonetheless */
h = (guint) gst_util_uint64_scale_int_round (set_w, den, num);
gst_structure_fixate_field_nearest_int (tmp, "height", h);
gst_structure_get_int (tmp, "height", &set_h);
gst_structure_free (tmp);
/* We kept the DAR and the width is nearest to the original width */
if (set_h == h) {
gst_structure_set (outs, "width", G_TYPE_INT, set_w, "height",
G_TYPE_INT, set_h, NULL);
goto done;
}
/* If all this failed, keep the dimensions with the DAR that was closest
* to the correct DAR. This changes the DAR but there's not much else to
* do here.
*/
if (set_w * ABS (set_h - h) < ABS (f_w - w) * f_h) {
f_h = set_h;
f_w = set_w;
}
gst_structure_set (outs, "width", G_TYPE_INT, f_w, "height", G_TYPE_INT,
f_h, NULL);
goto done;
} else {
GstStructure *tmp;
gint set_h, set_w, set_par_n, set_par_d, tmp2;
/* width, height and PAR are not fixed but passthrough is not possible */
/* First try to keep the height and width as good as possible
* and scale PAR */
tmp = gst_structure_copy (outs);
gst_structure_fixate_field_nearest_int (tmp, "height", from_h);
gst_structure_get_int (tmp, "height", &set_h);
gst_structure_fixate_field_nearest_int (tmp, "width", from_w);
gst_structure_get_int (tmp, "width", &set_w);
if (!gst_util_fraction_multiply (from_dar_n, from_dar_d, set_h, set_w,
&to_par_n, &to_par_d)) {
GST_ELEMENT_ERROR (base, CORE, NEGOTIATION, (NULL),
("Error calculating the output scaled size - integer overflow"));
gst_structure_free (tmp);
goto done;
}
if (!gst_structure_has_field (tmp, "pixel-aspect-ratio"))
gst_structure_set_value (tmp, "pixel-aspect-ratio", to_par);
gst_structure_fixate_field_nearest_fraction (tmp, "pixel-aspect-ratio",
to_par_n, to_par_d);
gst_structure_get_fraction (tmp, "pixel-aspect-ratio", &set_par_n,
&set_par_d);
gst_structure_free (tmp);
if (set_par_n == to_par_n && set_par_d == to_par_d) {
gst_structure_set (outs, "width", G_TYPE_INT, set_w, "height",
G_TYPE_INT, set_h, NULL);
if (gst_structure_has_field (outs, "pixel-aspect-ratio") ||
set_par_n != set_par_d)
gst_structure_set (outs, "pixel-aspect-ratio", GST_TYPE_FRACTION,
set_par_n, set_par_d, NULL);
goto done;
}
/* Otherwise try to scale width to keep the DAR with the set
* PAR and height */
if (!gst_util_fraction_multiply (from_dar_n, from_dar_d, set_par_d,
set_par_n, &num, &den)) {
GST_ELEMENT_ERROR (base, CORE, NEGOTIATION, (NULL),
("Error calculating the output scaled size - integer overflow"));
goto done;
}
w = (guint) gst_util_uint64_scale_int_round (set_h, num, den);
tmp = gst_structure_copy (outs);
gst_structure_fixate_field_nearest_int (tmp, "width", w);
gst_structure_get_int (tmp, "width", &tmp2);
gst_structure_free (tmp);
if (tmp2 == w) {
gst_structure_set (outs, "width", G_TYPE_INT, tmp2, "height",
G_TYPE_INT, set_h, NULL);
if (gst_structure_has_field (outs, "pixel-aspect-ratio") ||
set_par_n != set_par_d)
gst_structure_set (outs, "pixel-aspect-ratio", GST_TYPE_FRACTION,
set_par_n, set_par_d, NULL);
goto done;
}
/* ... or try the same with the height */
h = (guint) gst_util_uint64_scale_int_round (set_w, den, num);
tmp = gst_structure_copy (outs);
gst_structure_fixate_field_nearest_int (tmp, "height", h);
gst_structure_get_int (tmp, "height", &tmp2);
gst_structure_free (tmp);
if (tmp2 == h) {
gst_structure_set (outs, "width", G_TYPE_INT, set_w, "height",
G_TYPE_INT, tmp2, NULL);
if (gst_structure_has_field (outs, "pixel-aspect-ratio") ||
set_par_n != set_par_d)
gst_structure_set (outs, "pixel-aspect-ratio", GST_TYPE_FRACTION,
set_par_n, set_par_d, NULL);
goto done;
}
/* If all fails we can't keep the DAR and take the nearest values
* for everything from the first try */
gst_structure_set (outs, "width", G_TYPE_INT, set_w, "height",
G_TYPE_INT, set_h, NULL);
if (gst_structure_has_field (outs, "pixel-aspect-ratio") ||
set_par_n != set_par_d)
gst_structure_set (outs, "pixel-aspect-ratio", GST_TYPE_FRACTION,
set_par_n, set_par_d, NULL);
}
}
done:
GST_DEBUG_OBJECT (base, "fixated othercaps to %" GST_PTR_FORMAT, othercaps);
if (from_par == &fpar)
g_value_unset (&fpar);
if (to_par == &tpar)
g_value_unset (&tpar);
return othercaps;
}
static gboolean
gst_cuda_scale_set_info (GstCudaBaseTransform * btrans, GstCaps * incaps,
GstVideoInfo * in_info, GstCaps * outcaps, GstVideoInfo * out_info)
{
if (GST_VIDEO_INFO_WIDTH (in_info) == GST_VIDEO_INFO_WIDTH (out_info) &&
GST_VIDEO_INFO_HEIGHT (in_info) == GST_VIDEO_INFO_HEIGHT (out_info) &&
GST_VIDEO_INFO_FORMAT (in_info) == GST_VIDEO_INFO_FORMAT (out_info)) {
gst_base_transform_set_passthrough (GST_BASE_TRANSFORM (btrans), TRUE);
}
return GST_CUDA_BASE_TRANSFORM_CLASS (parent_class)->set_info (btrans,
incaps, in_info, outcaps, out_info);
}