gstreamer/subprojects/gst-plugins-bad/sys/nvcodec/gstnvencoder.cpp

2430 lines
71 KiB
C++
Raw Normal View History

nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
/* GStreamer
* Copyright (C) 2022 Seungha Yang <seungha@centricular.com>
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Library General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the
* Free Software Foundation, Inc., 51 Franklin St, Fifth Floor,
* Boston, MA 02110-1301, USA.
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include "gstnvencoder.h"
#include <gst/cuda/gstcudautils.h>
#include <gst/cuda/gstcudamemory.h>
#include <gst/cuda/gstcudabufferpool.h>
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
#include <string.h>
#ifdef GST_CUDA_HAS_D3D
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
#include <gst/d3d11/gstd3d11.h>
#endif
#ifdef G_OS_WIN32
#include <wrl.h>
/* *INDENT-OFF* */
using namespace Microsoft::WRL;
/* *INDENT-ON* */
#endif
GST_DEBUG_CATEGORY_STATIC (gst_nv_encoder_debug);
#define GST_CAT_DEFAULT gst_nv_encoder_debug
#define GET_LOCK(e) (&(GST_NV_ENCODER_CAST(e)->priv->lock))
#define GST_NV_ENCODER_LOCK(e) G_STMT_START { \
GST_TRACE_OBJECT (e, "Locking from thread %p", g_thread_self ()); \
g_mutex_lock(GET_LOCK(e)); \
GST_TRACE_OBJECT (e, "Locked from thread %p", g_thread_self ()); \
} G_STMT_END
#define GST_NV_ENCODER_UNLOCK(e) G_STMT_START { \
GST_TRACE_OBJECT (e, "Unlocking from thread %p", g_thread_self ()); \
g_mutex_unlock(GET_LOCK(e)); \
} G_STMT_END
struct _GstNvEncoderPrivate
{
GstCudaContext *context;
CUstream cuda_stream;
#ifdef GST_CUDA_HAS_D3D
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
GstD3D11Device *device;
GstD3D11Fence *fence;
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
#endif
GstNvEncoderDeviceMode subclass_device_mode;
GstNvEncoderDeviceMode selected_device_mode;
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
gint64 dxgi_adapter_luid;
guint cuda_device_id;
NV_ENC_INITIALIZE_PARAMS init_params;
NV_ENC_CONFIG config;
gpointer session;
guint lookahead;
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
GstVideoCodecState *input_state;
GstBufferPool *internal_pool;
GstClockTime dts_offset;
/* Array of GstNvEncoderTask, holding ownership */
GArray *task_pool;
GQueue free_tasks;
GQueue pending_tasks;
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
GQueue output_tasks;
GMutex lock;
GCond cond;
GRecMutex context_lock;
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
GThread *encoding_thread;
GstFlowReturn last_flow;
};
/**
* GstNvEncoder:
*
* Since: 1.22
*/
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
#define gst_nv_encoder_parent_class parent_class
G_DEFINE_ABSTRACT_TYPE_WITH_PRIVATE (GstNvEncoder, gst_nv_encoder,
GST_TYPE_VIDEO_ENCODER);
static void gst_nv_encoder_finalize (GObject * object);
static void gst_nv_encoder_set_context (GstElement * element,
GstContext * context);
static gboolean gst_nv_encoder_open (GstVideoEncoder * encoder);
static gboolean gst_nv_encoder_close (GstVideoEncoder * encoder);
static gboolean gst_nv_encoder_stop (GstVideoEncoder * encoder);
static gboolean gst_nv_encoder_sink_query (GstVideoEncoder * encoder,
GstQuery * query);
static gboolean gst_nv_encoder_src_query (GstVideoEncoder * encoder,
GstQuery * query);
static gboolean gst_nv_encoder_propose_allocation (GstVideoEncoder *
encoder, GstQuery * query);
static gboolean gst_nv_encoder_set_format (GstVideoEncoder * encoder,
GstVideoCodecState * state);
static GstFlowReturn gst_nv_encoder_handle_frame (GstVideoEncoder *
encoder, GstVideoCodecFrame * frame);
static GstFlowReturn gst_nv_encoder_finish (GstVideoEncoder * encoder);
static gboolean gst_nv_encoder_flush (GstVideoEncoder * encoder);
static void gst_nv_encoder_task_clear (GstNvEncoderTask * task);
static void
gst_nv_encoder_class_init (GstNvEncoderClass * klass)
{
GObjectClass *object_class = G_OBJECT_CLASS (klass);
GstElementClass *element_class = GST_ELEMENT_CLASS (klass);
GstVideoEncoderClass *videoenc_class = GST_VIDEO_ENCODER_CLASS (klass);
object_class->finalize = gst_nv_encoder_finalize;
element_class->set_context = GST_DEBUG_FUNCPTR (gst_nv_encoder_set_context);
videoenc_class->open = GST_DEBUG_FUNCPTR (gst_nv_encoder_open);
videoenc_class->close = GST_DEBUG_FUNCPTR (gst_nv_encoder_close);
videoenc_class->stop = GST_DEBUG_FUNCPTR (gst_nv_encoder_stop);
videoenc_class->sink_query = GST_DEBUG_FUNCPTR (gst_nv_encoder_sink_query);
videoenc_class->src_query = GST_DEBUG_FUNCPTR (gst_nv_encoder_src_query);
videoenc_class->propose_allocation =
GST_DEBUG_FUNCPTR (gst_nv_encoder_propose_allocation);
videoenc_class->set_format = GST_DEBUG_FUNCPTR (gst_nv_encoder_set_format);
videoenc_class->handle_frame =
GST_DEBUG_FUNCPTR (gst_nv_encoder_handle_frame);
videoenc_class->finish = GST_DEBUG_FUNCPTR (gst_nv_encoder_finish);
videoenc_class->flush = GST_DEBUG_FUNCPTR (gst_nv_encoder_flush);
GST_DEBUG_CATEGORY_INIT (gst_nv_encoder_debug, "nvencoder", 0, "nvencoder");
gst_type_mark_as_plugin_api (GST_TYPE_NV_ENCODER, (GstPluginAPIFlags) 0);
gst_type_mark_as_plugin_api (GST_TYPE_NV_ENCODER_PRESET,
(GstPluginAPIFlags) 0);
gst_type_mark_as_plugin_api (GST_TYPE_NV_ENCODER_RC_MODE,
(GstPluginAPIFlags) 0);
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
}
static void
gst_nv_encoder_init (GstNvEncoder * self)
{
GstNvEncoderPrivate *priv;
self->priv = priv = (GstNvEncoderPrivate *)
gst_nv_encoder_get_instance_private (self);
priv->task_pool = g_array_new (FALSE, TRUE, sizeof (GstNvEncoderTask));
g_array_set_clear_func (priv->task_pool,
(GDestroyNotify) gst_nv_encoder_task_clear);
g_queue_init (&priv->free_tasks);
g_queue_init (&priv->pending_tasks);
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
g_queue_init (&priv->output_tasks);
g_mutex_init (&priv->lock);
g_cond_init (&priv->cond);
g_rec_mutex_init (&priv->context_lock);
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
gst_video_encoder_set_min_pts (GST_VIDEO_ENCODER (self),
GST_SECOND * 60 * 60 * 1000);
GST_PAD_SET_ACCEPT_INTERSECT (GST_VIDEO_ENCODER_SINK_PAD (self));
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
}
static void
gst_nv_encoder_finalize (GObject * object)
{
GstNvEncoder *self = GST_NV_ENCODER (object);
GstNvEncoderPrivate *priv = self->priv;
g_array_unref (priv->task_pool);
g_mutex_clear (&priv->lock);
g_cond_clear (&priv->cond);
g_rec_mutex_clear (&priv->context_lock);
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
G_OBJECT_CLASS (parent_class)->finalize (object);
}
static void
gst_nv_encoder_set_context (GstElement * element, GstContext * context)
{
GstNvEncoder *self = GST_NV_ENCODER (element);
GstNvEncoderPrivate *priv = self->priv;
g_rec_mutex_lock (&priv->context_lock);
switch (priv->selected_device_mode) {
#ifdef GST_CUDA_HAS_D3D
case GST_NV_ENCODER_DEVICE_D3D11:
gst_d3d11_handle_set_context_for_adapter_luid (element,
context, priv->dxgi_adapter_luid, &priv->device);
break;
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
#endif
case GST_NV_ENCODER_DEVICE_CUDA:
gst_cuda_handle_set_context (element, context, priv->cuda_device_id,
&priv->context);
break;
default:
break;
}
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
g_rec_mutex_unlock (&priv->context_lock);
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
GST_ELEMENT_CLASS (parent_class)->set_context (element, context);
}
static gboolean
gst_nv_encoder_reset (GstNvEncoder * self)
{
GstNvEncoderPrivate *priv = self->priv;
GST_LOG_OBJECT (self, "Reset");
g_array_set_size (priv->task_pool, 0);
if (priv->internal_pool) {
gst_buffer_pool_set_active (priv->internal_pool, FALSE);
gst_clear_object (&priv->internal_pool);
}
if (priv->session) {
NvEncDestroyEncoder (priv->session);
priv->session = NULL;
}
if (priv->context && priv->cuda_stream) {
gst_cuda_context_push (priv->context);
CuStreamDestroy (priv->cuda_stream);
gst_cuda_context_pop (nullptr);
priv->cuda_stream = nullptr;
}
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
g_queue_clear (&priv->free_tasks);
g_queue_clear (&priv->pending_tasks);
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
g_queue_clear (&priv->output_tasks);
priv->last_flow = GST_FLOW_OK;
return TRUE;
}
static gboolean
gst_nv_encoder_device_lock (GstNvEncoder * self)
{
GstNvEncoderPrivate *priv = self->priv;
gboolean ret = TRUE;
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
switch (priv->selected_device_mode) {
#ifdef GST_CUDA_HAS_D3D
case GST_NV_ENCODER_DEVICE_D3D11:
gst_d3d11_device_lock (priv->device);
break;
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
#endif
case GST_NV_ENCODER_DEVICE_CUDA:
ret = gst_cuda_context_push (priv->context);
break;
default:
break;
}
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
return ret;
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
}
static gboolean
gst_nv_encoder_device_unlock (GstNvEncoder * self)
{
GstNvEncoderPrivate *priv = self->priv;
gboolean ret = TRUE;
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
switch (priv->selected_device_mode) {
#ifdef GST_CUDA_HAS_D3D
case GST_NV_ENCODER_DEVICE_D3D11:
gst_d3d11_device_unlock (priv->device);
break;
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
#endif
case GST_NV_ENCODER_DEVICE_CUDA:
ret = gst_cuda_context_pop (nullptr);
break;
default:
break;
}
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
return ret;
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
}
static GstFlowReturn
gst_nv_encoder_get_free_task (GstNvEncoder * self, GstNvEncoderTask ** task,
gboolean check_last_flow)
{
GstNvEncoderPrivate *priv = self->priv;
GstFlowReturn ret = GST_FLOW_OK;
GstNvEncoderTask *free_task = NULL;
GST_NV_ENCODER_LOCK (self);
if (check_last_flow) {
if (priv->last_flow != GST_FLOW_OK) {
ret = priv->last_flow;
GST_NV_ENCODER_UNLOCK (self);
return ret;
}
while (priv->last_flow == GST_FLOW_OK && (free_task = (GstNvEncoderTask *)
g_queue_pop_head (&priv->free_tasks)) == NULL) {
g_cond_wait (&priv->cond, &priv->lock);
}
ret = priv->last_flow;
if (ret != GST_FLOW_OK && free_task) {
g_queue_push_tail (&priv->free_tasks, free_task);
free_task = NULL;
}
} else {
while ((free_task = (GstNvEncoderTask *)
g_queue_pop_head (&priv->free_tasks)) == NULL)
g_cond_wait (&priv->cond, &priv->lock);
}
GST_NV_ENCODER_UNLOCK (self);
*task = free_task;
return ret;
}
static gboolean
gst_nv_encoder_drain (GstNvEncoder * self, gboolean locked)
{
GstNvEncoderPrivate *priv = self->priv;
NV_ENC_PIC_PARAMS pic_params = { 0, };
NVENCSTATUS status;
GstNvEncoderTask *task;
GstNvEncoderTask *pending_task;
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
if (!priv->session || !priv->encoding_thread)
return TRUE;
GST_DEBUG_OBJECT (self, "Drain");
if (locked)
GST_VIDEO_ENCODER_STREAM_UNLOCK (self);
gst_nv_encoder_get_free_task (self, &task, FALSE);
task->is_eos = TRUE;
pic_params.version = gst_nvenc_get_pic_params_version ();
pic_params.encodePicFlags = NV_ENC_PIC_FLAG_EOS;
pic_params.completionEvent = task->event_handle;
gst_nv_encoder_device_lock (self);
status = NvEncEncodePicture (priv->session, &pic_params);
if (status != NV_ENC_SUCCESS) {
GST_DEBUG_OBJECT (self, "Drain returned status %" GST_NVENC_STATUS_FORMAT,
GST_NVENC_STATUS_ARGS (status));
#ifdef G_OS_WIN32
if (task->event_handle) {
SetEvent (task->event_handle);
}
#endif
}
gst_nv_encoder_device_unlock (self);
GST_NV_ENCODER_LOCK (self);
while ((pending_task =
(GstNvEncoderTask *) g_queue_pop_head (&priv->pending_tasks)) !=
nullptr) {
g_queue_push_tail (&priv->output_tasks, pending_task);
}
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
g_queue_push_tail (&priv->output_tasks, task);
g_cond_broadcast (&priv->cond);
GST_NV_ENCODER_UNLOCK (self);
g_clear_pointer (&priv->encoding_thread, g_thread_join);
gst_nv_encoder_reset (self);
if (locked)
GST_VIDEO_ENCODER_STREAM_LOCK (self);
return TRUE;
}
#ifdef GST_CUDA_HAS_D3D
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
static gboolean
gst_nv_encoder_open_d3d11_device (GstNvEncoder * self)
{
GstNvEncoderPrivate *priv = self->priv;
ComPtr < ID3D10Multithread > multi_thread;
ID3D11Device *device_handle;
HRESULT hr;
if (!gst_d3d11_ensure_element_data_for_adapter_luid (GST_ELEMENT (self),
priv->dxgi_adapter_luid, &priv->device)) {
GST_ERROR_OBJECT (self, "Cannot create d3d11device");
return FALSE;
}
device_handle = gst_d3d11_device_get_device_handle (priv->device);
hr = device_handle->QueryInterface (IID_PPV_ARGS (&multi_thread));
if (!gst_d3d11_result (hr, priv->device)) {
GST_ERROR_OBJECT (self, "ID3D10Multithread interface is unavailable");
gst_clear_object (&priv->device);
return FALSE;
}
multi_thread->SetMultithreadProtected (TRUE);
return TRUE;
}
#endif
static gboolean
gst_nv_encoder_open (GstVideoEncoder * encoder)
{
GstNvEncoder *self = GST_NV_ENCODER (encoder);
GstNvEncoderPrivate *priv = self->priv;
switch (priv->selected_device_mode) {
case GST_NV_ENCODER_DEVICE_AUTO_SELECT:
/* Will open GPU later */
return TRUE;
#ifdef GST_CUDA_HAS_D3D
case GST_NV_ENCODER_DEVICE_D3D11:
return gst_nv_encoder_open_d3d11_device (self);
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
#endif
case GST_NV_ENCODER_DEVICE_CUDA:
if (!gst_cuda_ensure_element_context (GST_ELEMENT_CAST (encoder),
priv->cuda_device_id, &priv->context)) {
GST_ERROR_OBJECT (self, "failed to create CUDA context");
return FALSE;
}
break;
default:
g_assert_not_reached ();
return FALSE;
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
}
return TRUE;
}
static gboolean
gst_nv_encoder_close (GstVideoEncoder * encoder)
{
GstNvEncoder *self = GST_NV_ENCODER (encoder);
GstNvEncoderPrivate *priv = self->priv;
gst_clear_object (&priv->context);
#ifdef GST_CUDA_HAS_D3D
gst_clear_d3d11_fence (&priv->fence);
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
gst_clear_object (&priv->device);
#endif
return TRUE;
}
static gboolean
gst_nv_encoder_stop (GstVideoEncoder * encoder)
{
GstNvEncoder *self = GST_NV_ENCODER (encoder);
GstNvEncoderPrivate *priv = self->priv;
GST_DEBUG_OBJECT (self, "Stop");
gst_nv_encoder_drain (self, FALSE);
if (priv->subclass_device_mode == GST_NV_ENCODER_DEVICE_AUTO_SELECT) {
gst_clear_object (&priv->context);
#ifdef GST_CUDA_HAS_D3D
gst_clear_object (&priv->device);
#endif
priv->selected_device_mode = GST_NV_ENCODER_DEVICE_AUTO_SELECT;
}
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
g_clear_pointer (&priv->input_state, gst_video_codec_state_unref);
return TRUE;
}
static gboolean
gst_nv_encoder_handle_context_query (GstNvEncoder * self, GstQuery * query)
{
GstNvEncoderPrivate *priv = self->priv;
gboolean ret = FALSE;
g_rec_mutex_lock (&priv->context_lock);
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
switch (priv->selected_device_mode) {
#ifdef GST_CUDA_HAS_D3D
case GST_NV_ENCODER_DEVICE_D3D11:
ret = gst_d3d11_handle_context_query (GST_ELEMENT (self),
query, priv->device);
break;
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
#endif
case GST_NV_ENCODER_DEVICE_CUDA:
ret = gst_cuda_handle_context_query (GST_ELEMENT (self),
query, priv->context);
break;
default:
break;
}
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
g_rec_mutex_unlock (&priv->context_lock);
return ret;
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
}
static gboolean
gst_nv_encoder_sink_query (GstVideoEncoder * encoder, GstQuery * query)
{
GstNvEncoder *self = GST_NV_ENCODER (encoder);
switch (GST_QUERY_TYPE (query)) {
case GST_QUERY_CONTEXT:
if (gst_nv_encoder_handle_context_query (self, query))
return TRUE;
break;
default:
break;
}
return GST_VIDEO_ENCODER_CLASS (parent_class)->sink_query (encoder, query);
}
static gboolean
gst_nv_encoder_src_query (GstVideoEncoder * encoder, GstQuery * query)
{
GstNvEncoder *self = GST_NV_ENCODER (encoder);
switch (GST_QUERY_TYPE (query)) {
case GST_QUERY_CONTEXT:
if (gst_nv_encoder_handle_context_query (self, query))
return TRUE;
break;
default:
break;
}
return GST_VIDEO_ENCODER_CLASS (parent_class)->src_query (encoder, query);
}
static gboolean
gst_nv_encoder_propose_allocation (GstVideoEncoder * encoder, GstQuery * query)
{
GstNvEncoder *self = GST_NV_ENCODER (encoder);
GstNvEncoderPrivate *priv = self->priv;
GstVideoInfo info;
GstBufferPool *pool = NULL;
GstCaps *caps;
guint size;
GstStructure *config;
GstCapsFeatures *features;
guint min_buffers;
gst_query_parse_allocation (query, &caps, NULL);
if (!caps) {
GST_WARNING_OBJECT (self, "null caps in query");
return FALSE;
}
if (!gst_video_info_from_caps (&info, caps)) {
GST_WARNING_OBJECT (self, "Failed to convert caps into info");
return FALSE;
}
features = gst_caps_get_features (caps, 0);
min_buffers = gst_nv_encoder_get_task_size (self);
if (min_buffers == 0) {
GstNvEncoderClass *klass = GST_NV_ENCODER_GET_CLASS (self);
min_buffers = klass->calculate_min_buffers (self);
}
switch (priv->subclass_device_mode) {
case GST_NV_ENCODER_DEVICE_AUTO_SELECT:
/* Use upstream pool in case of auto select mode. We don't know which
* GPU to use at this moment */
gst_query_add_allocation_meta (query, GST_VIDEO_META_API_TYPE, nullptr);
gst_query_add_allocation_pool (query, nullptr, info.size, min_buffers, 0);
return TRUE;
#ifdef GST_CUDA_HAS_D3D
case GST_NV_ENCODER_DEVICE_D3D11:
if (features && gst_caps_features_contains (features,
GST_CAPS_FEATURE_MEMORY_D3D11_MEMORY)) {
GST_DEBUG_OBJECT (self, "upstream support d3d11 memory");
pool = gst_d3d11_buffer_pool_new (priv->device);
}
break;
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
#endif
case GST_NV_ENCODER_DEVICE_CUDA:
if (features && gst_caps_features_contains (features,
GST_CAPS_FEATURE_MEMORY_CUDA_MEMORY)) {
GST_DEBUG_OBJECT (self, "upstream support CUDA memory");
pool = gst_cuda_buffer_pool_new (priv->context);
}
break;
default:
g_assert_not_reached ();
return FALSE;
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
}
if (!pool)
pool = gst_video_buffer_pool_new ();
config = gst_buffer_pool_get_config (pool);
gst_buffer_pool_config_add_option (config, GST_BUFFER_POOL_OPTION_VIDEO_META);
size = GST_VIDEO_INFO_SIZE (&info);
gst_buffer_pool_config_set_params (config, caps, size, min_buffers, 0);
if (!gst_buffer_pool_set_config (pool, config)) {
GST_WARNING_OBJECT (self, "Failed to set pool config");
gst_object_unref (pool);
return FALSE;
}
config = gst_buffer_pool_get_config (pool);
gst_buffer_pool_config_get_params (config, NULL, &size, NULL, NULL);
gst_structure_free (config);
gst_query_add_allocation_pool (query, pool, size, min_buffers, 0);
gst_query_add_allocation_meta (query, GST_VIDEO_META_API_TYPE, NULL);
gst_object_unref (pool);
return TRUE;
}
/* called with lock */
static void
gst_nv_encoder_task_reset (GstNvEncoder * self, GstNvEncoderTask * task)
{
GstNvEncoderPrivate *priv = self->priv;
if (!task)
return;
if (task->buffer) {
gst_nv_encoder_device_lock (self);
if (priv->session) {
NvEncUnmapInputResource (priv->session,
task->mapped_resource.mappedResource);
NvEncUnregisterResource (priv->session,
task->register_resource.registeredResource);
}
gst_nv_encoder_device_unlock (self);
gst_buffer_unmap (task->buffer, &task->map_info);
gst_clear_buffer (&task->buffer);
}
#ifdef G_OS_WIN32
if (task->event_handle)
ResetEvent (task->event_handle);
#endif
task->is_eos = FALSE;
g_queue_push_head (&priv->free_tasks, task);
}
static gboolean
gst_nv_encoder_create_event_handle (GstNvEncoder * self, gpointer session,
gpointer * event_handle)
{
#ifdef G_OS_WIN32
NV_ENC_EVENT_PARAMS event_params = { 0, };
NVENCSTATUS status;
event_params.version = gst_nvenc_get_event_params_version ();
event_params.completionEvent = CreateEvent (NULL, FALSE, FALSE, NULL);
status = NvEncRegisterAsyncEvent (session, &event_params);
if (status != NV_ENC_SUCCESS) {
GST_ERROR_OBJECT (self,
"Failed to register async event handle, status %"
GST_NVENC_STATUS_FORMAT, GST_NVENC_STATUS_ARGS (status));
CloseHandle (event_params.completionEvent);
return FALSE;
}
*event_handle = event_params.completionEvent;
#endif
return TRUE;
}
static gboolean
gst_d3d11_encoder_wait_for_event_handle (GstNvEncoder * self,
gpointer event_handle)
{
#ifdef G_OS_WIN32
/* NVCODEC SDK uses 20s */
if (WaitForSingleObject (event_handle, 20000) == WAIT_FAILED) {
GST_ERROR_OBJECT (self, "Failed to wait for completion event");
return FALSE;
}
#endif
return TRUE;
}
static void
gst_nv_encoder_destroy_event_handle (GstNvEncoder * self, gpointer session,
gpointer event_handle)
{
#ifdef G_OS_WIN32
NV_ENC_EVENT_PARAMS event_params = { 0, };
NVENCSTATUS status;
event_params.version = gst_nvenc_get_event_params_version ();
event_params.completionEvent = event_handle;
status = NvEncUnregisterAsyncEvent (session, &event_params);
CloseHandle (event_handle);
if (status != NV_ENC_SUCCESS) {
GST_ERROR_OBJECT (self,
"Failed to unregister async event handle, status %"
GST_NVENC_STATUS_FORMAT, GST_NVENC_STATUS_ARGS (status));
}
#endif
}
static void
gst_nv_encoder_task_clear (GstNvEncoderTask * task)
{
GstNvEncoder *self;
GstNvEncoderPrivate *priv;
if (!task)
return;
self = task->encoder;
priv = self->priv;
if (priv->session) {
gst_nv_encoder_device_lock (self);
if (task->buffer) {
NvEncUnmapInputResource (priv->session,
task->mapped_resource.mappedResource);
NvEncUnregisterResource (priv->session,
task->register_resource.registeredResource);
}
if (task->output_ptr)
NvEncDestroyBitstreamBuffer (priv->session, task->output_ptr);
if (task->input_buffer.inputBuffer)
NvEncDestroyInputBuffer (priv->session, task->input_buffer.inputBuffer);
if (task->event_handle) {
gst_nv_encoder_destroy_event_handle (self, priv->session,
task->event_handle);
}
gst_nv_encoder_device_unlock (self);
}
if (task->buffer) {
gst_buffer_unmap (task->buffer, &task->map_info);
gst_clear_buffer (&task->buffer);
}
memset (task, 0, sizeof (GstNvEncoderTask));
}
static NV_ENC_PIC_STRUCT
gst_nv_encoder_get_pic_struct (GstNvEncoder * self, GstBuffer * buffer)
{
GstNvEncoderPrivate *priv = self->priv;
GstVideoInfo *info = &priv->input_state->info;
if (!GST_VIDEO_INFO_IS_INTERLACED (info))
return NV_ENC_PIC_STRUCT_FRAME;
if (GST_VIDEO_INFO_INTERLACE_MODE (info) == GST_VIDEO_INTERLACE_MODE_MIXED) {
if (!GST_BUFFER_FLAG_IS_SET (buffer, GST_VIDEO_BUFFER_FLAG_INTERLACED)) {
return NV_ENC_PIC_STRUCT_FRAME;
}
if (GST_BUFFER_FLAG_IS_SET (buffer, GST_VIDEO_BUFFER_FLAG_TFF))
return NV_ENC_PIC_STRUCT_FIELD_TOP_BOTTOM;
return NV_ENC_PIC_STRUCT_FIELD_BOTTOM_TOP;
}
switch (GST_VIDEO_INFO_FIELD_ORDER (info)) {
case GST_VIDEO_FIELD_ORDER_TOP_FIELD_FIRST:
return NV_ENC_PIC_STRUCT_FIELD_TOP_BOTTOM;
break;
case GST_VIDEO_FIELD_ORDER_BOTTOM_FIELD_FIRST:
return NV_ENC_PIC_STRUCT_FIELD_BOTTOM_TOP;
break;
default:
break;
}
if (GST_BUFFER_FLAG_IS_SET (buffer, GST_VIDEO_BUFFER_FLAG_TFF))
return NV_ENC_PIC_STRUCT_FIELD_TOP_BOTTOM;
return NV_ENC_PIC_STRUCT_FIELD_BOTTOM_TOP;
}
static GstFlowReturn
gst_nv_encoder_encode_frame (GstNvEncoder * self,
GstVideoCodecFrame * frame, GstNvEncoderTask * task)
{
GstNvEncoderPrivate *priv = self->priv;
NV_ENC_PIC_PARAMS pic_params = { 0, };
NVENCSTATUS status;
guint retry_count = 0;
const guint retry_threshold = 100;
pic_params.version = gst_nvenc_get_pic_params_version ();
if (task->buffer) {
pic_params.inputWidth = task->register_resource.width;
pic_params.inputHeight = task->register_resource.height;
pic_params.inputPitch = task->register_resource.pitch;
pic_params.inputBuffer = task->mapped_resource.mappedResource;
pic_params.bufferFmt = task->mapped_resource.mappedBufferFmt;
} else {
pic_params.inputWidth = task->input_buffer.width;
pic_params.inputHeight = task->input_buffer.height;
pic_params.inputPitch = task->lk_input_buffer.pitch;
pic_params.inputBuffer = task->input_buffer.inputBuffer;
pic_params.bufferFmt = task->input_buffer.bufferFmt;
}
pic_params.frameIdx = frame->system_frame_number;
pic_params.inputTimeStamp = frame->pts;
pic_params.inputDuration = frame->duration;
pic_params.outputBitstream = task->output_ptr;
pic_params.completionEvent = task->event_handle;
pic_params.pictureStruct = gst_nv_encoder_get_pic_struct (self, task->buffer);
if (GST_VIDEO_CODEC_FRAME_IS_FORCE_KEYFRAME (frame))
pic_params.encodePicFlags = NV_ENC_PIC_FLAG_FORCEIDR;
do {
gst_nv_encoder_device_lock (self);
status = NvEncEncodePicture (priv->session, &pic_params);
gst_nv_encoder_device_unlock (self);
if (status == NV_ENC_ERR_ENCODER_BUSY) {
if (retry_count < 100) {
GST_DEBUG_OBJECT (self, "GPU is busy, retry count (%d/%d)", retry_count,
retry_threshold);
retry_count++;
/* Magic number 1ms */
g_usleep (1000);
continue;
} else {
GST_ERROR_OBJECT (self, "GPU is keep busy, give up");
break;
}
}
break;
} while (TRUE);
GST_NV_ENCODER_LOCK (self);
if (status != NV_ENC_SUCCESS && status != NV_ENC_ERR_NEED_MORE_INPUT) {
GST_ERROR_OBJECT (self, "Encode return %" GST_NVENC_STATUS_FORMAT,
GST_NVENC_STATUS_ARGS (status));
gst_nv_encoder_task_reset (self, task);
GST_NV_ENCODER_UNLOCK (self);
return GST_FLOW_ERROR;
}
gst_video_codec_frame_set_user_data (frame, task, NULL);
/* On Windows and if async encoding is enabled, output thread will wait
* for completion event. But on Linux, async encoding is not supported.
* So, we should wait for NV_ENC_SUCCESS in case of sync mode
* (it would introduce latency though).
* Otherwise nvEncLockBitstream() will return error */
if (task->event_handle) {
/* Windows only path */
g_queue_push_tail (&priv->output_tasks, task);
g_cond_broadcast (&priv->cond);
} else {
g_queue_push_tail (&priv->pending_tasks, task);
if (status == NV_ENC_SUCCESS) {
bool notify = false;
/* XXX: nvEncLockBitstream() will return NV_ENC_ERR_INVALID_PARAM
* if lookahead is enabled. See also
* https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/494
*/
while (g_queue_get_length (&priv->pending_tasks) > priv->lookahead) {
GstNvEncoderTask *pending_task =
(GstNvEncoderTask *) g_queue_pop_head (&priv->pending_tasks);
g_queue_push_tail (&priv->output_tasks, pending_task);
notify = true;
}
if (notify)
g_cond_broadcast (&priv->cond);
}
}
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
GST_NV_ENCODER_UNLOCK (self);
return GST_FLOW_OK;
}
static GstVideoCodecFrame *
gst_nv_encoder_find_output_frame (GstVideoEncoder * self,
GstNvEncoderTask * task)
{
GList *frames, *iter;
GstVideoCodecFrame *ret = NULL;
frames = gst_video_encoder_get_frames (self);
for (iter = frames; iter; iter = g_list_next (iter)) {
GstVideoCodecFrame *frame = (GstVideoCodecFrame *) iter->data;
GstNvEncoderTask *other = (GstNvEncoderTask *)
gst_video_codec_frame_get_user_data (frame);
if (!other)
continue;
if (other == task) {
ret = frame;
break;
}
}
if (ret)
gst_video_codec_frame_ref (ret);
if (frames)
g_list_free_full (frames, (GDestroyNotify) gst_video_codec_frame_unref);
return ret;
}
static gpointer
gst_nv_encoder_thread_func (GstNvEncoder * self)
{
GstVideoEncoder *encoder = GST_VIDEO_ENCODER (self);
GstNvEncoderClass *klass = GST_NV_ENCODER_GET_CLASS (self);
GstNvEncoderPrivate *priv = self->priv;
GstNvEncoderTask *task = NULL;
do {
NV_ENC_LOCK_BITSTREAM bitstream = { 0, };
NVENCSTATUS status;
GstVideoCodecFrame *frame;
GstFlowReturn ret;
GST_NV_ENCODER_LOCK (self);
while ((task = (GstNvEncoderTask *)
g_queue_pop_head (&priv->output_tasks)) == NULL) {
g_cond_wait (&priv->cond, &priv->lock);
}
GST_NV_ENCODER_UNLOCK (self);
if (task->event_handle) {
if (!gst_d3d11_encoder_wait_for_event_handle (self, task->event_handle)) {
GST_ELEMENT_ERROR (self, STREAM, ENCODE, (NULL),
("Failed to wait for event signal"));
goto error;
}
}
if (task->is_eos) {
GST_INFO_OBJECT (self, "Got EOS packet");
GST_NV_ENCODER_LOCK (self);
gst_nv_encoder_task_reset (self, task);
g_cond_broadcast (&priv->cond);
GST_NV_ENCODER_UNLOCK (self);
goto exit_thread;
}
frame = gst_nv_encoder_find_output_frame (encoder, task);
if (!frame) {
GST_ELEMENT_ERROR (self, STREAM, ENCODE, (NULL),
("Failed to find associated codec frame"));
goto error;
}
if (!gst_nv_encoder_device_lock (self)) {
GST_ELEMENT_ERROR (self, STREAM, ENCODE, (NULL),
("Failed to lock device"));
goto error;
}
bitstream.version = gst_nvenc_get_lock_bitstream_version ();
bitstream.outputBitstream = task->output_ptr;
status = NvEncLockBitstream (priv->session, &bitstream);
if (status != NV_ENC_SUCCESS) {
gst_nv_encoder_device_unlock (self);
GST_ELEMENT_ERROR (self, STREAM, ENCODE, (NULL),
("Failed to lock bitstream, status: %" GST_NVENC_STATUS_FORMAT,
GST_NVENC_STATUS_ARGS (status)));
goto error;
}
if (klass->create_output_buffer) {
frame->output_buffer = klass->create_output_buffer (self, &bitstream);
} else {
frame->output_buffer =
gst_buffer_new_memdup (bitstream.bitstreamBufferPtr,
bitstream.bitstreamSizeInBytes);
}
GST_BUFFER_FLAG_SET (frame->output_buffer, GST_BUFFER_FLAG_MARKER);
if (bitstream.pictureType == NV_ENC_PIC_TYPE_IDR)
GST_VIDEO_CODEC_FRAME_SET_SYNC_POINT (frame);
NvEncUnlockBitstream (priv->session, task->output_ptr);
gst_nv_encoder_device_unlock (self);
frame->dts = frame->pts - priv->dts_offset;
frame->pts = bitstream.outputTimeStamp;
frame->duration = bitstream.outputDuration;
ret = gst_video_encoder_finish_frame (encoder, frame);
if (ret != GST_FLOW_OK) {
GST_INFO_OBJECT (self,
"Finish frame returned %s", gst_flow_get_name (ret));
}
GST_NV_ENCODER_LOCK (self);
gst_nv_encoder_task_reset (self, task);
priv->last_flow = ret;
g_cond_broadcast (&priv->cond);
GST_NV_ENCODER_UNLOCK (self);
if (ret != GST_FLOW_OK) {
GST_INFO_OBJECT (self, "Push returned %s", gst_flow_get_name (ret));
goto exit_thread;
}
} while (TRUE);
exit_thread:
{
GST_INFO_OBJECT (self, "Exiting thread");
return NULL;
}
error:
{
GST_NV_ENCODER_LOCK (self);
gst_nv_encoder_task_reset (self, task);
priv->last_flow = GST_FLOW_ERROR;
g_cond_broadcast (&priv->cond);
GST_NV_ENCODER_UNLOCK (self);
goto exit_thread;
}
}
static guint
gst_nv_encoder_calculate_task_pool_size (GstNvEncoder * self,
NV_ENC_CONFIG * config)
{
guint num_tasks;
/* At least 4 surfaces are required as documented by Nvidia Encoder guide */
num_tasks = 4;
/* lookahead depth */
num_tasks += config->rcParams.lookaheadDepth;
/* B frames + 1 */
num_tasks += MAX (0, config->frameIntervalP - 1) + 1;
GST_DEBUG_OBJECT (self, "Calculated task pool size: %d "
"(lookahead %d, frameIntervalP %d)",
num_tasks, config->rcParams.lookaheadDepth, config->frameIntervalP);
return num_tasks;
}
static gboolean
gst_nv_encoder_open_encode_session (GstNvEncoder * self, gpointer * session)
{
GstNvEncoderPrivate *priv = self->priv;
NV_ENC_OPEN_ENCODE_SESSION_EX_PARAMS session_params = { 0, };
session_params.version =
gst_nvenc_get_open_encode_session_ex_params_version ();
session_params.apiVersion = gst_nvenc_get_api_version ();
NVENCSTATUS status;
switch (priv->selected_device_mode) {
#ifdef GST_CUDA_HAS_D3D
case GST_NV_ENCODER_DEVICE_D3D11:
session_params.deviceType = NV_ENC_DEVICE_TYPE_DIRECTX;
session_params.device = gst_d3d11_device_get_device_handle (priv->device);
break;
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
#endif
case GST_NV_ENCODER_DEVICE_CUDA:
session_params.deviceType = NV_ENC_DEVICE_TYPE_CUDA;
session_params.device = gst_cuda_context_get_handle (priv->context);
break;
default:
g_assert_not_reached ();
return FALSE;
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
}
status = NvEncOpenEncodeSessionEx (&session_params, session);
if (status != NV_ENC_SUCCESS) {
GST_ERROR_OBJECT (self, "Failed to open session, status: %"
GST_NVENC_STATUS_FORMAT, GST_NVENC_STATUS_ARGS (status));
return FALSE;
}
return TRUE;
}
#ifdef GST_CUDA_HAS_D3D
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
static GstBufferPool *
gst_nv_encoder_create_d3d11_pool (GstNvEncoder * self,
GstVideoCodecState * state)
{
GstNvEncoderPrivate *priv = self->priv;
GstStructure *config;
GstBufferPool *pool = NULL;
GstD3D11AllocationParams *params;
params = gst_d3d11_allocation_params_new (priv->device, &state->info,
GST_D3D11_ALLOCATION_FLAG_DEFAULT, 0, D3D11_RESOURCE_MISC_SHARED);
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
pool = gst_d3d11_buffer_pool_new (priv->device);
config = gst_buffer_pool_get_config (pool);
gst_buffer_pool_config_set_d3d11_allocation_params (config, params);
gst_d3d11_allocation_params_free (params);
gst_buffer_pool_config_set_params (config, state->caps,
GST_VIDEO_INFO_SIZE (&state->info), 0, 0);
if (!gst_buffer_pool_set_config (pool, config)) {
GST_ERROR_OBJECT (self, "Failed to set pool config");
gst_object_unref (pool);
return NULL;
}
if (!gst_buffer_pool_set_active (pool, TRUE)) {
GST_ERROR_OBJECT (self, "Failed to set active");
gst_object_unref (pool);
return NULL;
}
return pool;
}
#endif
static GstBufferPool *
gst_nv_encoder_create_pool (GstNvEncoder * self, GstVideoCodecState * state)
{
GstNvEncoderPrivate *priv = self->priv;
GstStructure *config;
GstBufferPool *pool = NULL;
/* At this moment device type must be selected already */
switch (priv->selected_device_mode) {
#ifdef GST_CUDA_HAS_D3D
case GST_NV_ENCODER_DEVICE_D3D11:
return gst_nv_encoder_create_d3d11_pool (self, state);
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
#endif
case GST_NV_ENCODER_DEVICE_CUDA:
pool = gst_cuda_buffer_pool_new (priv->context);
break;
default:
g_assert_not_reached ();
return FALSE;
}
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
config = gst_buffer_pool_get_config (pool);
gst_buffer_pool_config_set_params (config, state->caps,
GST_VIDEO_INFO_SIZE (&state->info), 0, 0);
if (!gst_buffer_pool_set_config (pool, config)) {
GST_ERROR_OBJECT (self, "Failed to set pool config");
gst_object_unref (pool);
return NULL;
}
if (!gst_buffer_pool_set_active (pool, TRUE)) {
GST_ERROR_OBJECT (self, "Failed to set active");
gst_object_unref (pool);
return NULL;
}
return pool;
}
static gboolean
gst_nv_encoder_init_session (GstNvEncoder * self, GstBuffer * in_buf)
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
{
GstNvEncoderPrivate *priv = self->priv;
GstNvEncoderClass *klass = GST_NV_ENCODER_GET_CLASS (self);
GstVideoCodecState *state = priv->input_state;
GstVideoInfo *info = &state->info;
NVENCSTATUS status;
guint task_pool_size;
gint fps_n, fps_d;
GstClockTime frame_duration, min_latency, max_latency;
guint i;
gst_nv_encoder_reset (self);
memset (&priv->init_params, 0, sizeof (NV_ENC_INITIALIZE_PARAMS));
memset (&priv->config, 0, sizeof (NV_ENC_CONFIG));
if (priv->selected_device_mode == GST_NV_ENCODER_DEVICE_AUTO_SELECT) {
GstNvEncoderDeviceData data;
gboolean ret;
if (!in_buf) {
GST_DEBUG_OBJECT (self, "Unknown device mode, open session later");
return TRUE;
}
if (!klass->select_device (self, info, in_buf, &data)) {
GST_ELEMENT_ERROR (self, STREAM, ENCODE, (NULL),
("Failed to select device mode"));
return FALSE;
}
GST_DEBUG_OBJECT (self,
"Selected device mode: %d, cuda-device-id: %d, adapter-luid %"
G_GINT64_FORMAT, data.device_mode, data.cuda_device_id,
data.adapter_luid);
g_assert (data.device_mode == GST_NV_ENCODER_DEVICE_CUDA ||
data.device_mode == GST_NV_ENCODER_DEVICE_D3D11);
g_rec_mutex_lock (&priv->context_lock);
priv->selected_device_mode = data.device_mode;
priv->cuda_device_id = data.cuda_device_id;
priv->dxgi_adapter_luid = data.adapter_luid;
gst_clear_object (&priv->context);
if (data.device_mode == GST_NV_ENCODER_DEVICE_CUDA)
priv->context = (GstCudaContext *) data.device;
#ifdef GST_CUDA_HAS_D3D
gst_clear_object (&priv->device);
if (data.device_mode == GST_NV_ENCODER_DEVICE_D3D11)
priv->device = (GstD3D11Device *) data.device;
#endif
ret = gst_nv_encoder_open (GST_VIDEO_ENCODER (self));
g_rec_mutex_unlock (&priv->context_lock);
if (!ret) {
GST_ELEMENT_ERROR (self, STREAM, ENCODE, (NULL),
("Failed to open device"));
return FALSE;
}
}
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
priv->internal_pool = gst_nv_encoder_create_pool (self, state);
if (!priv->internal_pool) {
GST_ELEMENT_ERROR (self, STREAM, ENCODE, (NULL),
("Failed to create internal pool"));
return FALSE;
}
if (!gst_nv_encoder_device_lock (self)) {
GST_ELEMENT_ERROR (self, STREAM, ENCODE, (NULL), ("Failed to lock device"));
gst_nv_encoder_reset (self);
return FALSE;
}
if (!gst_nv_encoder_open_encode_session (self, &priv->session)) {
GST_ELEMENT_ERROR (self, STREAM, ENCODE, (NULL),
("Failed to open session"));
goto error;
}
if (!klass->set_format (self, state, priv->session, &priv->init_params,
&priv->config)) {
GST_ELEMENT_ERROR (self, STREAM, ENCODE, (NULL), ("Failed to set format"));
goto error;
}
priv->init_params.encodeConfig = &priv->config;
status = NvEncInitializeEncoder (priv->session, &priv->init_params);
if (status != NV_ENC_SUCCESS) {
GST_ELEMENT_ERROR (self, STREAM, ENCODE, (NULL),
("Failed to init encoder, status: %"
GST_NVENC_STATUS_FORMAT, GST_NVENC_STATUS_ARGS (status)));
goto error;
}
if (priv->selected_device_mode == GST_NV_ENCODER_DEVICE_CUDA &&
gst_nvenc_have_set_io_cuda_streams ()) {
CUresult cuda_ret = CuStreamCreate (&priv->cuda_stream, CU_STREAM_DEFAULT);
if (gst_cuda_result (cuda_ret)) {
status = NvEncSetIOCudaStreams (priv->session,
(NV_ENC_CUSTREAM_PTR) & priv->cuda_stream,
(NV_ENC_CUSTREAM_PTR) & priv->cuda_stream);
if (status != NV_ENC_SUCCESS) {
GST_WARNING_OBJECT (self, "NvEncSetIOCudaStreams failed, status: %"
GST_NVENC_STATUS_FORMAT, GST_NVENC_STATUS_ARGS (status));
}
}
}
priv->lookahead = priv->config.rcParams.lookaheadDepth;
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
task_pool_size = gst_nv_encoder_calculate_task_pool_size (self,
&priv->config);
g_array_set_size (priv->task_pool, task_pool_size);
for (i = 0; i < task_pool_size; i++) {
NV_ENC_CREATE_BITSTREAM_BUFFER buffer_params = { 0, };
GstNvEncoderTask *task = (GstNvEncoderTask *)
& g_array_index (priv->task_pool, GstNvEncoderTask, i);
task->encoder = self;
buffer_params.version = gst_nvenc_get_create_bitstream_buffer_version ();
status = NvEncCreateBitstreamBuffer (priv->session, &buffer_params);
if (status != NV_ENC_SUCCESS) {
GST_ELEMENT_ERROR (self, STREAM, ENCODE, (NULL),
("Failed to create bitstream buffer, status: %"
GST_NVENC_STATUS_FORMAT, GST_NVENC_STATUS_ARGS (status)));
goto error;
}
task->output_ptr = buffer_params.bitstreamBuffer;
if (priv->init_params.enableEncodeAsync) {
if (!gst_nv_encoder_create_event_handle (self,
priv->session, &task->event_handle)) {
GST_ELEMENT_ERROR (self, STREAM, ENCODE, (NULL),
("Failed to create async event handle"));
goto error;
}
}
g_queue_push_tail (&priv->free_tasks, task);
}
gst_nv_encoder_device_unlock (self);
if (!klass->set_output_state (self, priv->input_state, priv->session)) {
GST_ELEMENT_ERROR (self, STREAM, ENCODE, (NULL),
("Failed to set output state"));
gst_nv_encoder_reset (self);
return FALSE;
}
priv->encoding_thread = g_thread_new ("GstNvEncoderThread",
(GThreadFunc) gst_nv_encoder_thread_func, self);
if (info->fps_n > 0 && info->fps_d > 0) {
fps_n = info->fps_n;
fps_d = info->fps_d;
} else {
fps_n = 25;
fps_d = 1;
}
frame_duration = gst_util_uint64_scale (GST_SECOND, fps_d, fps_n);
priv->dts_offset = 0;
/* Calculate DTS offset for B frame. NVENC does not provide DTS */
if (priv->config.frameIntervalP > 1)
priv->dts_offset = frame_duration * (priv->config.frameIntervalP - 1);
min_latency = priv->dts_offset +
priv->config.rcParams.lookaheadDepth * frame_duration;
max_latency = frame_duration * priv->task_pool->len;
gst_video_encoder_set_latency (GST_VIDEO_ENCODER (self),
min_latency, max_latency);
return TRUE;
error:
gst_nv_encoder_device_unlock (self);
gst_nv_encoder_reset (self);
return FALSE;
}
static gboolean
gst_nv_encoder_reconfigure_session (GstNvEncoder * self)
{
GstNvEncoderPrivate *priv = self->priv;
NV_ENC_RECONFIGURE_PARAMS params = { 0, };
NVENCSTATUS status;
if (!priv->session) {
GST_WARNING_OBJECT (self,
"Encoding session was not configured, open session");
gst_nv_encoder_drain (self, TRUE);
return gst_nv_encoder_init_session (self, nullptr);
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
}
params.version = gst_nvenc_get_reconfigure_params_version ();
params.reInitEncodeParams = priv->init_params;
params.reInitEncodeParams.encodeConfig = &priv->config;
status = NvEncReconfigureEncoder (priv->session, &params);
if (status != NV_ENC_SUCCESS) {
GST_WARNING_OBJECT (self, "Failed to reconfigure encoder, status %"
GST_NVENC_STATUS_FORMAT, GST_NVENC_STATUS_ARGS (status));
gst_nv_encoder_drain (self, TRUE);
return gst_nv_encoder_init_session (self, nullptr);
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
}
return TRUE;
}
static gboolean
gst_nv_encoder_set_format (GstVideoEncoder * encoder,
GstVideoCodecState * state)
{
GstNvEncoder *self = GST_NV_ENCODER (encoder);
GstNvEncoderPrivate *priv = self->priv;
gst_nv_encoder_drain (self, TRUE);
g_clear_pointer (&priv->input_state, gst_video_codec_state_unref);
priv->input_state = gst_video_codec_state_ref (state);
priv->last_flow = GST_FLOW_OK;
/* select device again on next buffer */
if (priv->subclass_device_mode == GST_NV_ENCODER_DEVICE_AUTO_SELECT)
priv->selected_device_mode = GST_NV_ENCODER_DEVICE_AUTO_SELECT;
return gst_nv_encoder_init_session (self, nullptr);
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
}
static NV_ENC_BUFFER_FORMAT
gst_nv_encoder_get_buffer_format (GstNvEncoder * self, GstVideoFormat format)
{
switch (format) {
case GST_VIDEO_FORMAT_NV12:
return NV_ENC_BUFFER_FORMAT_NV12;
case GST_VIDEO_FORMAT_Y444:
return NV_ENC_BUFFER_FORMAT_YUV444;
case GST_VIDEO_FORMAT_P010_10LE:
return NV_ENC_BUFFER_FORMAT_YUV420_10BIT;
case GST_VIDEO_FORMAT_Y444_16LE:
return NV_ENC_BUFFER_FORMAT_YUV444_10BIT;
default:
GST_ERROR_OBJECT (self, "Unexpected format %s",
gst_video_format_to_string (format));
g_assert_not_reached ();
break;
}
return NV_ENC_BUFFER_FORMAT_UNDEFINED;
}
static GstFlowReturn
gst_nv_encoder_copy_system (GstNvEncoder * self, const GstVideoInfo * info,
GstBuffer * buffer, gpointer session, GstNvEncoderTask * task)
{
NVENCSTATUS status;
GstVideoFrame frame;
guint8 *dst_data;
NV_ENC_BUFFER_FORMAT format;
format =
gst_nv_encoder_get_buffer_format (self, GST_VIDEO_INFO_FORMAT (info));
if (format == NV_ENC_BUFFER_FORMAT_UNDEFINED)
return GST_FLOW_ERROR;
if (!gst_video_frame_map (&frame, info, buffer, GST_MAP_READ)) {
GST_ERROR_OBJECT (self, "Failed to map buffer");
return GST_FLOW_ERROR;
}
if (!task->input_buffer.inputBuffer) {
NV_ENC_CREATE_INPUT_BUFFER input_buffer = { 0, };
input_buffer.version = gst_nvenc_get_create_input_buffer_version ();
input_buffer.width = info->width;
input_buffer.height = info->height;
input_buffer.bufferFmt = format;
status = NvEncCreateInputBuffer (session, &input_buffer);
if (status != NV_ENC_SUCCESS) {
GST_ERROR_OBJECT (self, "Failed to create input buffer, status %"
GST_NVENC_STATUS_FORMAT, GST_NVENC_STATUS_ARGS (status));
gst_video_frame_unmap (&frame);
return GST_FLOW_ERROR;
}
task->input_buffer = input_buffer;
}
task->lk_input_buffer.version = gst_nvenc_get_lock_input_buffer_version ();
task->lk_input_buffer.inputBuffer = task->input_buffer.inputBuffer;
status = NvEncLockInputBuffer (session, &task->lk_input_buffer);
if (status != NV_ENC_SUCCESS) {
GST_ERROR_OBJECT (self, "Failed to lock input buffer, status %"
GST_NVENC_STATUS_FORMAT, GST_NVENC_STATUS_ARGS (status));
gst_video_frame_unmap (&frame);
return GST_FLOW_ERROR;
}
dst_data = (guint8 *) task->lk_input_buffer.bufferDataPtr;
for (guint i = 0; i < GST_VIDEO_FRAME_N_PLANES (&frame); i++) {
guint8 *src_data = (guint8 *) GST_VIDEO_FRAME_PLANE_DATA (&frame, i);
guint width_in_bytes = GST_VIDEO_FRAME_COMP_WIDTH (&frame, i) *
GST_VIDEO_FRAME_COMP_PSTRIDE (&frame, i);
guint stride = GST_VIDEO_FRAME_PLANE_STRIDE (&frame, i);
guint height = GST_VIDEO_FRAME_COMP_HEIGHT (&frame, i);
for (guint j = 0; j < height; j++) {
memcpy (dst_data, src_data, width_in_bytes);
dst_data += task->lk_input_buffer.pitch;
src_data += stride;
}
}
NvEncUnlockInputBuffer (session, task->input_buffer.inputBuffer);
gst_video_frame_unmap (&frame);
return GST_FLOW_OK;
}
static GstFlowReturn
gst_nv_encoder_prepare_task_input_cuda (GstNvEncoder * self,
const GstVideoInfo * info, GstBuffer * buffer, gpointer session,
GstNvEncoderTask * task)
{
GstNvEncoderPrivate *priv = self->priv;
GstMemory *mem;
GstCudaMemory *cmem;
NVENCSTATUS status;
mem = gst_buffer_peek_memory (buffer, 0);
if (!gst_is_cuda_memory (mem)) {
GST_LOG_OBJECT (self, "Not a CUDA buffer, system copy");
return gst_nv_encoder_copy_system (self, info, buffer, session, task);
}
cmem = GST_CUDA_MEMORY_CAST (mem);
if (cmem->context != priv->context) {
GST_LOG_OBJECT (self, "Different context, system copy");
return gst_nv_encoder_copy_system (self, info, buffer, session, task);
}
task->buffer = gst_buffer_ref (buffer);
if (!gst_buffer_map (task->buffer, &task->map_info,
(GstMapFlags) (GST_MAP_READ | GST_MAP_CUDA))) {
GST_ERROR_OBJECT (self, "Failed to map buffer");
gst_clear_buffer (&task->buffer);
return GST_FLOW_ERROR;
}
cmem = (GstCudaMemory *) gst_buffer_peek_memory (task->buffer, 0);
task->register_resource.version = gst_nvenc_get_register_resource_version ();
task->register_resource.resourceType =
NV_ENC_INPUT_RESOURCE_TYPE_CUDADEVICEPTR;
task->register_resource.width = cmem->info.width;
task->register_resource.height = cmem->info.height;
task->register_resource.pitch = cmem->info.stride[0];
task->register_resource.resourceToRegister = task->map_info.data;
task->register_resource.bufferFormat =
gst_nv_encoder_get_buffer_format (self, GST_VIDEO_INFO_FORMAT (info));
if (task->register_resource.bufferFormat == NV_ENC_BUFFER_FORMAT_UNDEFINED)
return GST_FLOW_ERROR;
status = NvEncRegisterResource (session, &task->register_resource);
if (status != NV_ENC_SUCCESS) {
GST_ERROR_OBJECT (self, "Failed to register resource, status %"
GST_NVENC_STATUS_FORMAT, GST_NVENC_STATUS_ARGS (status));
gst_buffer_unmap (task->buffer, &task->map_info);
gst_clear_buffer (&task->buffer);
return GST_FLOW_ERROR;
}
task->mapped_resource.version = gst_nvenc_get_map_input_resource_version ();
task->mapped_resource.registeredResource =
task->register_resource.registeredResource;
status = NvEncMapInputResource (session, &task->mapped_resource);
if (status != NV_ENC_SUCCESS) {
GST_ERROR_OBJECT (self, "Failed to map input resource, status %"
GST_NVENC_STATUS_FORMAT, GST_NVENC_STATUS_ARGS (status));
NvEncUnregisterResource (session,
task->register_resource.registeredResource);
gst_buffer_unmap (task->buffer, &task->map_info);
gst_clear_buffer (&task->buffer);
return GST_FLOW_ERROR;
}
return GST_FLOW_OK;
}
#ifdef GST_CUDA_HAS_D3D
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
static GstBuffer *
gst_nv_encoder_copy_d3d11 (GstNvEncoder * self,
GstBuffer * src_buffer, GstBufferPool * pool, gboolean shared)
{
GstNvEncoderPrivate *priv = self->priv;
D3D11_TEXTURE2D_DESC src_desc, dst_desc;
D3D11_BOX src_box;
guint subresource_idx;
GstMemory *src_mem, *dst_mem;
GstMapInfo src_info, dst_info;
ID3D11Texture2D *src_tex, *dst_tex;
ID3D11Device *device_handle;
ID3D11DeviceContext *device_context;
GstBuffer *dst_buffer;
GstFlowReturn ret;
ComPtr < IDXGIResource > dxgi_resource;
ComPtr < ID3D11Texture2D > shared_texture;
HANDLE shared_handle;
GstD3D11Device *device;
HRESULT hr;
ret = gst_buffer_pool_acquire_buffer (pool, &dst_buffer, NULL);
if (ret != GST_FLOW_OK) {
GST_ERROR_OBJECT (self, "Failed to acquire buffer");
return NULL;
}
src_mem = gst_buffer_peek_memory (src_buffer, 0);
dst_mem = gst_buffer_peek_memory (dst_buffer, 0);
device = GST_D3D11_MEMORY_CAST (src_mem)->device;
device_handle = gst_d3d11_device_get_device_handle (device);
device_context = gst_d3d11_device_get_device_context_handle (device);
if (!gst_memory_map (src_mem, &src_info,
(GstMapFlags) (GST_MAP_READ | GST_MAP_D3D11))) {
GST_WARNING ("Failed to map src memory");
gst_buffer_unref (dst_buffer);
return NULL;
}
if (!gst_memory_map (dst_mem, &dst_info,
(GstMapFlags) (GST_MAP_WRITE | GST_MAP_D3D11))) {
GST_WARNING ("Failed to map dst memory");
gst_memory_unmap (src_mem, &src_info);
gst_buffer_unref (dst_buffer);
return NULL;
}
src_tex = (ID3D11Texture2D *) src_info.data;
dst_tex = (ID3D11Texture2D *) dst_info.data;
gst_d3d11_memory_get_texture_desc (GST_D3D11_MEMORY_CAST (src_mem),
&src_desc);
gst_d3d11_memory_get_texture_desc (GST_D3D11_MEMORY_CAST (dst_mem),
&dst_desc);
subresource_idx =
gst_d3d11_memory_get_subresource_index (GST_D3D11_MEMORY_CAST (src_mem));
if (shared) {
hr = dst_tex->QueryInterface (IID_PPV_ARGS (&dxgi_resource));
if (!gst_d3d11_result (hr, priv->device)) {
GST_ERROR_OBJECT (self,
"IDXGIResource interface is not available, hr: 0x%x", (guint) hr);
goto error;
}
hr = dxgi_resource->GetSharedHandle (&shared_handle);
if (!gst_d3d11_result (hr, priv->device)) {
GST_ERROR_OBJECT (self, "Failed to get shared handle, hr: 0x%x",
(guint) hr);
goto error;
}
hr = device_handle->OpenSharedResource (shared_handle,
IID_PPV_ARGS (&shared_texture));
if (!gst_d3d11_result (hr, device)) {
GST_ERROR_OBJECT (self, "Failed to get shared texture, hr: 0x%x",
(guint) hr);
goto error;
}
dst_tex = shared_texture.Get ();
}
src_box.left = 0;
src_box.top = 0;
src_box.front = 0;
src_box.back = 1;
src_box.right = MIN (src_desc.Width, dst_desc.Width);
src_box.bottom = MIN (src_desc.Height, dst_desc.Height);
if (shared) {
if (priv->fence && priv->fence->device != device)
gst_clear_d3d11_fence (&priv->fence);
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
if (!priv->fence)
priv->fence = gst_d3d11_device_create_fence (device);
if (!priv->fence) {
GST_ERROR_OBJECT (self, "Couldn't crete fence");
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
goto error;
}
gst_d3d11_device_lock (device);
}
device_context->CopySubresourceRegion (dst_tex, 0,
0, 0, 0, src_tex, subresource_idx, &src_box);
if (shared) {
if (!gst_d3d11_fence_signal (priv->fence) ||
!gst_d3d11_fence_wait (priv->fence)) {
GST_ERROR_OBJECT (self, "Couldn't sync GPU operation");
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
gst_d3d11_device_unlock (device);
gst_clear_d3d11_fence (&priv->fence);
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
goto error;
}
gst_d3d11_device_unlock (device);
}
gst_memory_unmap (dst_mem, &dst_info);
gst_memory_unmap (src_mem, &src_info);
return dst_buffer;
error:
gst_memory_unmap (dst_mem, &dst_info);
gst_memory_unmap (src_mem, &src_info);
gst_buffer_unref (dst_buffer);
return NULL;
}
static GstBuffer *
gst_nv_encoder_upload_d3d11_frame (GstNvEncoder * self,
const GstVideoInfo * info, GstBuffer * buffer, GstBufferPool * pool)
{
GstD3D11Memory *dmem;
D3D11_TEXTURE2D_DESC desc;
dmem = (GstD3D11Memory *) gst_buffer_peek_memory (buffer, 0);
gst_d3d11_memory_get_texture_desc (dmem, &desc);
if (desc.Usage != D3D11_USAGE_DEFAULT) {
GST_TRACE_OBJECT (self, "Not a default usage texture, d3d11 copy");
return gst_nv_encoder_copy_d3d11 (self, buffer, pool, FALSE);
}
GST_TRACE_OBJECT (self, "Use input buffer without copy");
return gst_buffer_ref (buffer);
}
static GstFlowReturn
gst_nv_encoder_prepare_task_input_d3d11 (GstNvEncoder * self,
const GstVideoInfo * info, GstBuffer * buffer, gpointer session,
GstBufferPool * pool, GstNvEncoderTask * task)
{
GstNvEncoderPrivate *priv = self->priv;
GstMemory *mem;
GstD3D11Memory *dmem;
D3D11_TEXTURE2D_DESC desc;
NVENCSTATUS status;
if (gst_buffer_n_memory (buffer) > 1) {
GST_LOG_OBJECT (self, "Not a native DXGI format, system copy");
return gst_nv_encoder_copy_system (self, info, buffer, session, task);
}
mem = gst_buffer_peek_memory (buffer, 0);
if (!gst_is_d3d11_memory (mem)) {
GST_LOG_OBJECT (self, "Not a D3D11 buffer, system copy");
return gst_nv_encoder_copy_system (self, info, buffer, session, task);
}
dmem = GST_D3D11_MEMORY_CAST (mem);
if (dmem->device != priv->device) {
gint64 adapter_luid;
g_object_get (dmem->device, "adapter-luid", &adapter_luid, NULL);
if (adapter_luid == priv->dxgi_adapter_luid) {
GST_LOG_OBJECT (self, "Different device but same GPU, copy d3d11");
task->buffer = gst_nv_encoder_copy_d3d11 (self, buffer, pool, TRUE);
} else {
GST_LOG_OBJECT (self, "Different device, system copy");
return gst_nv_encoder_copy_system (self, info, buffer, session, task);
}
}
if (!task->buffer)
task->buffer = gst_nv_encoder_upload_d3d11_frame (self, info, buffer, pool);
if (!task->buffer) {
GST_ERROR_OBJECT (self, "Failed to upload buffer");
return GST_FLOW_ERROR;
}
if (!gst_buffer_map (task->buffer, &task->map_info,
(GstMapFlags) (GST_MAP_READ | GST_MAP_D3D11))) {
GST_ERROR_OBJECT (self, "Failed to map buffer");
gst_clear_buffer (&task->buffer);
return GST_FLOW_ERROR;
}
dmem = (GstD3D11Memory *) gst_buffer_peek_memory (task->buffer, 0);
gst_d3d11_memory_get_texture_desc (dmem, &desc);
task->register_resource.version = gst_nvenc_get_register_resource_version ();
task->register_resource.resourceType = NV_ENC_INPUT_RESOURCE_TYPE_DIRECTX;
task->register_resource.width = desc.Width;
task->register_resource.height = desc.Height;
switch (desc.Format) {
case DXGI_FORMAT_NV12:
task->register_resource.bufferFormat = NV_ENC_BUFFER_FORMAT_NV12;
break;
case DXGI_FORMAT_P010:
task->register_resource.bufferFormat = NV_ENC_BUFFER_FORMAT_YUV420_10BIT;
break;
default:
GST_ERROR_OBJECT (self, "Unexpected DXGI format %d", desc.Format);
g_assert_not_reached ();
return GST_FLOW_ERROR;
}
task->register_resource.subResourceIndex =
gst_d3d11_memory_get_subresource_index (dmem);
task->register_resource.resourceToRegister =
gst_d3d11_memory_get_resource_handle (dmem);
status = NvEncRegisterResource (session, &task->register_resource);
if (status != NV_ENC_SUCCESS) {
GST_ERROR_OBJECT (self, "Failed to register resource, status %"
GST_NVENC_STATUS_FORMAT, GST_NVENC_STATUS_ARGS (status));
gst_buffer_unmap (task->buffer, &task->map_info);
gst_clear_buffer (&task->buffer);
return GST_FLOW_ERROR;
}
task->mapped_resource.version = gst_nvenc_get_map_input_resource_version ();
task->mapped_resource.registeredResource =
task->register_resource.registeredResource;
status = NvEncMapInputResource (session, &task->mapped_resource);
if (status != NV_ENC_SUCCESS) {
GST_ERROR_OBJECT (self, "Failed to map input resource, status %"
GST_NVENC_STATUS_FORMAT, GST_NVENC_STATUS_ARGS (status));
NvEncUnregisterResource (session,
task->register_resource.registeredResource);
gst_buffer_unmap (task->buffer, &task->map_info);
gst_clear_buffer (&task->buffer);
return GST_FLOW_ERROR;
}
return GST_FLOW_OK;
}
#endif
static GstFlowReturn
gst_nv_encoder_prepare_task_input (GstNvEncoder * self,
const GstVideoInfo * info, GstBuffer * buffer, gpointer session,
GstBufferPool * pool, GstNvEncoderTask * task)
{
GstNvEncoderPrivate *priv = self->priv;
GstFlowReturn ret = GST_FLOW_ERROR;
switch (priv->selected_device_mode) {
#ifdef GST_CUDA_HAS_D3D
case GST_NV_ENCODER_DEVICE_D3D11:
ret = gst_nv_encoder_prepare_task_input_d3d11 (self, info, buffer,
session, pool, task);
break;
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
#endif
case GST_NV_ENCODER_DEVICE_CUDA:
ret = gst_nv_encoder_prepare_task_input_cuda (self, info, buffer,
session, task);
break;
default:
g_assert_not_reached ();
break;
}
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
return ret;
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
}
static GstFlowReturn
gst_nv_encoder_handle_frame (GstVideoEncoder * encoder,
GstVideoCodecFrame * frame)
{
GstNvEncoder *self = GST_NV_ENCODER (encoder);
GstNvEncoderPrivate *priv = self->priv;
GstNvEncoderClass *klass = GST_NV_ENCODER_GET_CLASS (self);
GstFlowReturn ret = GST_FLOW_ERROR;
GstNvEncoderTask *task = NULL;
GstNvEncoderReconfigure reconfig;
GstBuffer *in_buf = frame->input_buffer;
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
GST_TRACE_OBJECT (self, "Handle frame");
GST_NV_ENCODER_LOCK (self);
ret = priv->last_flow;
GST_NV_ENCODER_UNLOCK (self);
if (ret != GST_FLOW_OK) {
GST_INFO_OBJECT (self, "Last flow was %s", gst_flow_get_name (ret));
gst_video_encoder_finish_frame (encoder, frame);
return ret;
}
if (!priv->session && !gst_nv_encoder_init_session (self, in_buf)) {
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
GST_ERROR_OBJECT (self, "Encoder object was not configured");
gst_video_encoder_finish_frame (encoder, frame);
return GST_FLOW_NOT_NEGOTIATED;
}
reconfig = klass->check_reconfigure (self, &priv->config);
switch (reconfig) {
case GST_NV_ENCODER_RECONFIGURE_BITRATE:
if (!gst_nv_encoder_reconfigure_session (self)) {
gst_video_encoder_finish_frame (encoder, frame);
return GST_FLOW_NOT_NEGOTIATED;
}
break;
case GST_NV_ENCODER_RECONFIGURE_FULL:
{
gst_nv_encoder_drain (self, TRUE);
if (!gst_nv_encoder_init_session (self, nullptr)) {
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
gst_video_encoder_finish_frame (encoder, frame);
return GST_FLOW_NOT_NEGOTIATED;
}
break;
}
default:
break;
}
/* Release stream lock temporarily for encoding thread to be able to
* push encoded data */
GST_VIDEO_ENCODER_STREAM_UNLOCK (self);
ret = gst_nv_encoder_get_free_task (self, &task, TRUE);
GST_VIDEO_ENCODER_STREAM_LOCK (self);
if (ret != GST_FLOW_OK) {
GST_DEBUG_OBJECT (self, "Last flow was %s", gst_flow_get_name (ret));
gst_video_encoder_finish_frame (encoder, frame);
return ret;
}
if (!gst_nv_encoder_device_lock (self)) {
GST_ERROR_OBJECT (self, "Failed to lock device");
gst_video_encoder_finish_frame (encoder, frame);
return GST_FLOW_ERROR;
}
g_assert (task->buffer == NULL);
ret = gst_nv_encoder_prepare_task_input (self, &priv->input_state->info,
in_buf, priv->session, priv->internal_pool, task);
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
gst_nv_encoder_device_unlock (self);
if (ret != GST_FLOW_OK) {
GST_ERROR_OBJECT (self, "Failed to upload frame");
GST_NV_ENCODER_LOCK (self);
gst_nv_encoder_task_reset (self, task);
GST_NV_ENCODER_UNLOCK (self);
gst_video_encoder_finish_frame (encoder, frame);
return ret;
}
ret = gst_nv_encoder_encode_frame (self, frame, task);
if (ret != GST_FLOW_OK) {
GST_ERROR_OBJECT (self, "Failed to encode frame");
gst_video_encoder_finish_frame (encoder, frame);
return ret;
}
gst_video_codec_frame_unref (frame);
return GST_FLOW_OK;
}
static GstFlowReturn
gst_nv_encoder_finish (GstVideoEncoder * encoder)
{
GstNvEncoder *self = GST_NV_ENCODER (encoder);
GST_DEBUG_OBJECT (self, "Finish");
gst_nv_encoder_drain (self, TRUE);
return GST_FLOW_OK;
}
static gboolean
gst_nv_encoder_flush (GstVideoEncoder * encoder)
{
GstNvEncoder *self = GST_NV_ENCODER (encoder);
GstNvEncoderPrivate *priv = self->priv;
GST_DEBUG_OBJECT (self, "Flush");
gst_nv_encoder_drain (self, TRUE);
priv->last_flow = GST_FLOW_OK;
return TRUE;
}
guint
gst_nv_encoder_get_task_size (GstNvEncoder * encoder)
{
g_return_val_if_fail (GST_IS_NV_ENCODER (encoder), 0);
return encoder->priv->task_pool->len;
}
void
gst_nv_encoder_set_device_mode (GstNvEncoder * encoder,
GstNvEncoderDeviceMode mode, guint cuda_device_id, gint64 adapter_luid)
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
{
GstNvEncoderPrivate *priv = encoder->priv;
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
priv->subclass_device_mode = mode;
priv->selected_device_mode = mode;
priv->cuda_device_id = cuda_device_id;
priv->dxgi_adapter_luid = adapter_luid;
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
}
/**
* GstNvEncoderPreset:
*
* Since: 1.22
*/
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
GType
gst_nv_encoder_preset_get_type (void)
{
static GType preset_type = 0;
static const GEnumValue presets[] = {
{GST_NV_ENCODER_PRESET_DEFAULT, "Default", "default"},
{GST_NV_ENCODER_PRESET_HP, "High Performance", "hp"},
{GST_NV_ENCODER_PRESET_HQ, "High Quality", "hq"},
{GST_NV_ENCODER_PRESET_LOW_LATENCY_DEFAULT, "Low Latency", "low-latency"},
{GST_NV_ENCODER_PRESET_LOW_LATENCY_HQ, "Low Latency, High Quality",
"low-latency-hq"},
{GST_NV_ENCODER_PRESET_LOW_LATENCY_HP, "Low Latency, High Performance",
"low-latency-hp"},
{GST_NV_ENCODER_PRESET_LOSSLESS_DEFAULT, "Lossless", "lossless"},
{GST_NV_ENCODER_PRESET_LOSSLESS_HP, "Lossless, High Performance",
"lossless-hp"},
{0, NULL, NULL},
};
if (g_once_init_enter (&preset_type)) {
GType type = g_enum_register_static ("GstNvEncoderPreset", presets);
g_once_init_leave (&preset_type, type);
}
return preset_type;
}
void
gst_nv_encoder_preset_to_guid (GstNvEncoderPreset preset, GUID * guid)
{
switch (preset) {
case GST_NV_ENCODER_PRESET_DEFAULT:
*guid = NV_ENC_PRESET_DEFAULT_GUID;
break;
case GST_NV_ENCODER_PRESET_HP:
*guid = NV_ENC_PRESET_HP_GUID;
break;
case GST_NV_ENCODER_PRESET_HQ:
*guid = NV_ENC_PRESET_HQ_GUID;
break;
case GST_NV_ENCODER_PRESET_LOW_LATENCY_DEFAULT:
*guid = NV_ENC_PRESET_LOW_LATENCY_DEFAULT_GUID;
break;
case GST_NV_ENCODER_PRESET_LOW_LATENCY_HQ:
*guid = NV_ENC_PRESET_LOW_LATENCY_HQ_GUID;
break;
case GST_NV_ENCODER_PRESET_LOW_LATENCY_HP:
*guid = NV_ENC_PRESET_LOW_LATENCY_HP_GUID;
break;
case GST_NV_ENCODER_PRESET_LOSSLESS_DEFAULT:
*guid = NV_ENC_PRESET_LOSSLESS_DEFAULT_GUID;
break;
case GST_NV_ENCODER_PRESET_LOSSLESS_HP:
*guid = NV_ENC_PRESET_LOSSLESS_HP_GUID;
break;
default:
break;
}
*guid = NV_ENC_PRESET_DEFAULT_GUID;
}
/**
* GstNvEncoderRCMode:
*
* Since: 1.22
*/
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
GType
gst_nv_encoder_rc_mode_get_type (void)
{
static GType rc_mode_type = 0;
static const GEnumValue rc_modes[] = {
{GST_NV_ENCODER_RC_MODE_CONSTQP, "Constant Quantization", "cqp"},
nvcodec: Add new Direct3D11/CUDA mode encoder implementation Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11 input support and re-written nvcuda{h264,h265}enc elements. Newly writeen elements have some differences compared with old nv{h264,h265}enc including non-backward compatible changes. * RGBA is not a supported input format any more: New elements will support only YUV formats to avoid implicit conversion done by hardware. Ideally it should be done by upstream element in order to have more control on it. Moreover, RGBA support can cause redundant RGBA -> YUV conversion if multiple encoders are used for the same RGBA input * Subsampled planar format support is dropped: I420 and YV12 format are not supported formats for Direct3D11. Although it's supported in CUDA mode, it's not a hardware friendly memory layout and it will waste GPU memory since UV planes will have large padding due to the memory layout requirement of NVENC. * GL support is dropped: Similar to the RGBA case, GL support in encoder would be suboptimal if GL input is used by multiple encoders, because each encoder will copy GL memory into CUDA memory. Upstream cudaupload element can be used for GL <-> CUDA interop instead. * No more pre-allocation of encoder input surfaces. New implementation will use input CUDA memory without copy (zero-copy) or will copy into a NVENC's input buffer struct in case of system memory input. Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-15 19:58:16 +00:00
{GST_NV_ENCODER_RC_MODE_VBR, "Variable Bit Rate", "vbr"},
{GST_NV_ENCODER_RC_MODE_CBR, "Constant Bit Rate", "cbr"},
{GST_NV_ENCODER_RC_MODE_CBR_LOWDELAY_HQ,
"Low-Delay CBR, High Quality", "cbr-ld-hq"},
{GST_NV_ENCODER_RC_MODE_CBR_HQ, "CBR, High Quality (slower)", "cbr-hq"},
{GST_NV_ENCODER_RC_MODE_VBR_HQ, "VBR, High Quality (slower)", "vbr-hq"},
{0, NULL, NULL},
};
if (g_once_init_enter (&rc_mode_type)) {
GType type = g_enum_register_static ("GstNvEncoderRCMode", rc_modes);
g_once_init_leave (&rc_mode_type, type);
}
return rc_mode_type;
}
NV_ENC_PARAMS_RC_MODE
gst_nv_encoder_rc_mode_to_native (GstNvEncoderRCMode rc_mode)
{
switch (rc_mode) {
case GST_NV_ENCODER_RC_MODE_CONSTQP:
return NV_ENC_PARAMS_RC_CONSTQP;
case GST_NV_ENCODER_RC_MODE_VBR:
return NV_ENC_PARAMS_RC_VBR;
case GST_NV_ENCODER_RC_MODE_CBR:
return NV_ENC_PARAMS_RC_CBR;
case GST_NV_ENCODER_RC_MODE_CBR_LOWDELAY_HQ:
return NV_ENC_PARAMS_RC_CBR_LOWDELAY_HQ;
case GST_NV_ENCODER_RC_MODE_CBR_HQ:
return NV_ENC_PARAMS_RC_CBR_HQ;
case GST_NV_ENCODER_RC_MODE_VBR_HQ:
return NV_ENC_PARAMS_RC_VBR_HQ;
default:
break;
}
return NV_ENC_PARAMS_RC_VBR;
}
const gchar *
gst_nv_encoder_status_to_string (NVENCSTATUS status)
{
#define CASE(err) \
case err: \
return G_STRINGIFY (err);
switch (status) {
CASE (NV_ENC_SUCCESS);
CASE (NV_ENC_ERR_NO_ENCODE_DEVICE);
CASE (NV_ENC_ERR_UNSUPPORTED_DEVICE);
CASE (NV_ENC_ERR_INVALID_ENCODERDEVICE);
CASE (NV_ENC_ERR_INVALID_DEVICE);
CASE (NV_ENC_ERR_DEVICE_NOT_EXIST);
CASE (NV_ENC_ERR_INVALID_PTR);
CASE (NV_ENC_ERR_INVALID_EVENT);
CASE (NV_ENC_ERR_INVALID_PARAM);
CASE (NV_ENC_ERR_INVALID_CALL);
CASE (NV_ENC_ERR_OUT_OF_MEMORY);
CASE (NV_ENC_ERR_ENCODER_NOT_INITIALIZED);
CASE (NV_ENC_ERR_UNSUPPORTED_PARAM);
CASE (NV_ENC_ERR_LOCK_BUSY);
CASE (NV_ENC_ERR_NOT_ENOUGH_BUFFER);
CASE (NV_ENC_ERR_INVALID_VERSION);
CASE (NV_ENC_ERR_MAP_FAILED);
CASE (NV_ENC_ERR_NEED_MORE_INPUT);
CASE (NV_ENC_ERR_ENCODER_BUSY);
CASE (NV_ENC_ERR_EVENT_NOT_REGISTERD);
CASE (NV_ENC_ERR_GENERIC);
CASE (NV_ENC_ERR_INCOMPATIBLE_CLIENT_KEY);
CASE (NV_ENC_ERR_UNIMPLEMENTED);
CASE (NV_ENC_ERR_RESOURCE_REGISTER_FAILED);
CASE (NV_ENC_ERR_RESOURCE_NOT_REGISTERED);
CASE (NV_ENC_ERR_RESOURCE_NOT_MAPPED);
default:
break;
}
#undef CASE
return "Unknown";
}
GstNvEncoderClassData *
gst_nv_encoder_class_data_new (void)
{
GstNvEncoderClassData *data = g_new0 (GstNvEncoderClassData, 1);
data->ref_count = 1;
return data;
}
GstNvEncoderClassData *
gst_nv_encoder_class_data_ref (GstNvEncoderClassData * cdata)
{
g_atomic_int_add (&cdata->ref_count, 1);
return cdata;
}
void
gst_nv_encoder_class_data_unref (GstNvEncoderClassData * cdata)
{
if (g_atomic_int_dec_and_test (&cdata->ref_count)) {
gst_clear_caps (&cdata->sink_caps);
gst_clear_caps (&cdata->src_caps);
if (cdata->formats)
g_list_free_full (cdata->formats, (GDestroyNotify) g_free);
if (cdata->profiles)
g_list_free_full (cdata->profiles, (GDestroyNotify) g_free);
g_free (cdata);
}
}
void
gst_nv_encoder_get_encoder_caps (gpointer session, const GUID * encode_guid,
GstNvEncoderDeviceCaps * device_caps)
{
GstNvEncoderDeviceCaps dev_caps = { 0, };
NV_ENC_CAPS_PARAM caps_param = { 0, };
NVENCSTATUS status;
GUID guid = *encode_guid;
GST_DEBUG_CATEGORY_INIT (gst_nv_encoder_debug, "nvencoder", 0, "nvencoder");
caps_param.version = gst_nvenc_get_caps_param_version ();
#define CHECK_CAPS(to_query,val,default_val) G_STMT_START { \
gint _val; \
caps_param.capsToQuery = to_query; \
status = NvEncGetEncodeCaps (session, guid, &caps_param, \
&_val); \
if (status != NV_ENC_SUCCESS) { \
GST_WARNING ("Unable to query %s, status: %" \
GST_NVENC_STATUS_FORMAT, G_STRINGIFY (to_query), \
GST_NVENC_STATUS_ARGS (status)); \
val = default_val; \
} else { \
GST_DEBUG ("%s: %d", G_STRINGIFY (to_query), _val); \
val = _val; \
} \
} G_STMT_END
CHECK_CAPS (NV_ENC_CAPS_NUM_MAX_BFRAMES, dev_caps.max_bframes, 0);
CHECK_CAPS (NV_ENC_CAPS_SUPPORTED_RATECONTROL_MODES,
dev_caps.ratecontrol_modes, NV_ENC_PARAMS_RC_VBR);
CHECK_CAPS (NV_ENC_CAPS_SUPPORT_FIELD_ENCODING, dev_caps.field_encoding, 0);
CHECK_CAPS (NV_ENC_CAPS_SUPPORT_MONOCHROME, dev_caps.monochrome, 0);
CHECK_CAPS (NV_ENC_CAPS_SUPPORT_FMO, dev_caps.fmo, 0);
CHECK_CAPS (NV_ENC_CAPS_SUPPORT_QPELMV, dev_caps.qpelmv, 0);
CHECK_CAPS (NV_ENC_CAPS_SUPPORT_BDIRECT_MODE, dev_caps.bdirect_mode, 0);
CHECK_CAPS (NV_ENC_CAPS_SUPPORT_CABAC, dev_caps.cabac, 0);
CHECK_CAPS (NV_ENC_CAPS_SUPPORT_ADAPTIVE_TRANSFORM,
dev_caps.adaptive_transform, 0);
CHECK_CAPS (NV_ENC_CAPS_SUPPORT_STEREO_MVC, dev_caps.stereo_mvc, 0);
CHECK_CAPS (NV_ENC_CAPS_NUM_MAX_TEMPORAL_LAYERS, dev_caps.temoral_layers, 0);
CHECK_CAPS (NV_ENC_CAPS_SUPPORT_HIERARCHICAL_PFRAMES,
dev_caps.hierarchical_pframes, 0);
CHECK_CAPS (NV_ENC_CAPS_SUPPORT_HIERARCHICAL_BFRAMES,
dev_caps.hierarchical_bframes, 0);
CHECK_CAPS (NV_ENC_CAPS_LEVEL_MAX, dev_caps.level_max, 0);
CHECK_CAPS (NV_ENC_CAPS_LEVEL_MIN, dev_caps.level_min, 0);
CHECK_CAPS (NV_ENC_CAPS_SEPARATE_COLOUR_PLANE,
dev_caps.separate_colour_plane, 0);
CHECK_CAPS (NV_ENC_CAPS_WIDTH_MAX, dev_caps.width_max, 4096);
CHECK_CAPS (NV_ENC_CAPS_HEIGHT_MAX, dev_caps.height_max, 4096);
CHECK_CAPS (NV_ENC_CAPS_SUPPORT_TEMPORAL_SVC, dev_caps.temporal_svc, 0);
CHECK_CAPS (NV_ENC_CAPS_SUPPORT_DYN_RES_CHANGE, dev_caps.dyn_res_change, 0);
CHECK_CAPS (NV_ENC_CAPS_SUPPORT_DYN_BITRATE_CHANGE,
dev_caps.dyn_bitrate_change, 0);
CHECK_CAPS (NV_ENC_CAPS_SUPPORT_DYN_FORCE_CONSTQP,
dev_caps.dyn_force_constqp, 0);
CHECK_CAPS (NV_ENC_CAPS_SUPPORT_DYN_RCMODE_CHANGE,
dev_caps.dyn_rcmode_change, 0);
CHECK_CAPS (NV_ENC_CAPS_SUPPORT_SUBFRAME_READBACK,
dev_caps.subframe_readback, 0);
CHECK_CAPS (NV_ENC_CAPS_SUPPORT_CONSTRAINED_ENCODING,
dev_caps.constrained_encoding, 0);
CHECK_CAPS (NV_ENC_CAPS_SUPPORT_INTRA_REFRESH, dev_caps.intra_refresh, 0);
CHECK_CAPS (NV_ENC_CAPS_SUPPORT_CUSTOM_VBV_BUF_SIZE,
dev_caps.custom_vbv_buf_size, 0);
CHECK_CAPS (NV_ENC_CAPS_SUPPORT_DYNAMIC_SLICE_MODE,
dev_caps.dynamic_slice_mode, 0);
CHECK_CAPS (NV_ENC_CAPS_SUPPORT_REF_PIC_INVALIDATION,
dev_caps.ref_pic_invalidation, 0);
CHECK_CAPS (NV_ENC_CAPS_PREPROC_SUPPORT, dev_caps.preproc_support, 0);
/* NOTE: Async is Windows only */
#ifdef G_OS_WIN32
CHECK_CAPS (NV_ENC_CAPS_ASYNC_ENCODE_SUPPORT,
dev_caps.async_encoding_support, 0);
#endif
CHECK_CAPS (NV_ENC_CAPS_MB_NUM_MAX, dev_caps.mb_num_max, 0);
CHECK_CAPS (NV_ENC_CAPS_MB_PER_SEC_MAX, dev_caps.mb_per_sec_max, 0);
CHECK_CAPS (NV_ENC_CAPS_SUPPORT_YUV444_ENCODE, dev_caps.yuv444_encode, 0);
CHECK_CAPS (NV_ENC_CAPS_SUPPORT_LOSSLESS_ENCODE, dev_caps.lossless_encode, 0);
CHECK_CAPS (NV_ENC_CAPS_SUPPORT_SAO, dev_caps.sao, 0);
CHECK_CAPS (NV_ENC_CAPS_SUPPORT_MEONLY_MODE, dev_caps.meonly_mode, 0);
CHECK_CAPS (NV_ENC_CAPS_SUPPORT_LOOKAHEAD, dev_caps.lookahead, 0);
CHECK_CAPS (NV_ENC_CAPS_SUPPORT_TEMPORAL_AQ, dev_caps.temporal_aq, 0);
CHECK_CAPS (NV_ENC_CAPS_SUPPORT_10BIT_ENCODE,
dev_caps.supports_10bit_encode, 0);
CHECK_CAPS (NV_ENC_CAPS_NUM_MAX_LTR_FRAMES, dev_caps.num_max_ltr_frames, 0);
CHECK_CAPS (NV_ENC_CAPS_SUPPORT_WEIGHTED_PREDICTION,
dev_caps.weighted_prediction, 0);
CHECK_CAPS (NV_ENC_CAPS_SUPPORT_BFRAME_REF_MODE, dev_caps.bframe_ref_mode, 0);
CHECK_CAPS (NV_ENC_CAPS_SUPPORT_EMPHASIS_LEVEL_MAP,
dev_caps.emphasis_level_map, 0);
CHECK_CAPS (NV_ENC_CAPS_WIDTH_MIN, dev_caps.width_min, 16);
CHECK_CAPS (NV_ENC_CAPS_HEIGHT_MIN, dev_caps.height_min, 16);
CHECK_CAPS (NV_ENC_CAPS_SUPPORT_MULTIPLE_REF_FRAMES,
dev_caps.multiple_ref_frames, 0);
#undef CHECK_CAPS
*device_caps = dev_caps;
}
void
gst_nv_encoder_merge_device_caps (const GstNvEncoderDeviceCaps * a,
const GstNvEncoderDeviceCaps * b, GstNvEncoderDeviceCaps * merged)
{
GstNvEncoderDeviceCaps caps;
#define SELECT_MAX(value) G_STMT_START { \
caps.value = MAX (a->value, b->value); \
} G_STMT_END
#define SELECT_MIN(value) G_STMT_START { \
caps.value = MAX (MIN (a->value, b->value), 1); \
} G_STMT_END
SELECT_MAX (max_bframes);
SELECT_MAX (ratecontrol_modes);
SELECT_MAX (field_encoding);
SELECT_MAX (monochrome);
SELECT_MAX (fmo);
SELECT_MAX (qpelmv);
SELECT_MAX (bdirect_mode);
SELECT_MAX (cabac);
SELECT_MAX (adaptive_transform);
SELECT_MAX (stereo_mvc);
SELECT_MAX (temoral_layers);
SELECT_MAX (hierarchical_pframes);
SELECT_MAX (hierarchical_bframes);
SELECT_MAX (level_max);
SELECT_MAX (level_min);
SELECT_MAX (separate_colour_plane);
SELECT_MAX (width_max);
SELECT_MAX (height_max);
SELECT_MAX (temporal_svc);
SELECT_MAX (dyn_res_change);
SELECT_MAX (dyn_bitrate_change);
SELECT_MAX (dyn_force_constqp);
SELECT_MAX (dyn_rcmode_change);
SELECT_MAX (subframe_readback);
SELECT_MAX (constrained_encoding);
SELECT_MAX (intra_refresh);
SELECT_MAX (custom_vbv_buf_size);
SELECT_MAX (dynamic_slice_mode);
SELECT_MAX (ref_pic_invalidation);
SELECT_MAX (preproc_support);
SELECT_MAX (async_encoding_support);
SELECT_MAX (mb_num_max);
SELECT_MAX (mb_per_sec_max);
SELECT_MAX (yuv444_encode);
SELECT_MAX (lossless_encode);
SELECT_MAX (sao);
SELECT_MAX (meonly_mode);
SELECT_MAX (lookahead);
SELECT_MAX (temporal_aq);
SELECT_MAX (supports_10bit_encode);
SELECT_MAX (num_max_ltr_frames);
SELECT_MAX (weighted_prediction);
SELECT_MAX (bframe_ref_mode);
SELECT_MAX (emphasis_level_map);
SELECT_MIN (width_min);
SELECT_MIN (height_min);
SELECT_MAX (multiple_ref_frames);
#undef SELECT_MAX
#undef SELECT_MIN
*merged = caps;
}