2002-03-20 21:45:04 +00:00
|
|
|
/* GStreamer
|
2001-12-22 23:26:33 +00:00
|
|
|
* Copyright (C) <1999> Erik Walthinsen <omega@cse.ogi.edu>
|
2006-05-20 22:42:15 +00:00
|
|
|
* <2006> Stefan Kost <ensonic@users.sf.net>
|
Port GstSpectrum to GstAudioFilter and libgstfft, add support for int32, float and double, use floats for the message...
Original commit message from CVS:
* configure.ac:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-audiotest.c: (draw_spectrum),
(message_handler), (main):
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (message_handler):
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_start),
(gst_spectrum_setup), (gst_spectrum_message_new),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Port GstSpectrum to GstAudioFilter and libgstfft, add support
for int32, float and double, use floats for the message contents,
average all FFTs done in one interval for better results, use
a better windowing function, allow posting the phase in the message
and actually do an FFT with the requested number of bands instead
of interpolating.
* tests/check/elements/spectrum.c: (GST_START_TEST),
(spectrum_suite):
Improve the units tests by checking for a 11025Hz sine wave
and add unit tests for all 4 supported sample types.
2007-09-06 07:21:22 +00:00
|
|
|
* <2007> Sebastian Dröge <slomo@circular-chaos.org>
|
2001-12-22 23:26:33 +00:00
|
|
|
*
|
|
|
|
* This library is free software; you can redistribute it and/or
|
|
|
|
* modify it under the terms of the GNU Library General Public
|
|
|
|
* License as published by the Free Software Foundation; either
|
|
|
|
* version 2 of the License, or (at your option) any later version.
|
|
|
|
*
|
|
|
|
* This library is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
|
|
* Library General Public License for more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU Library General Public
|
|
|
|
* License along with this library; if not, write to the
|
|
|
|
* Free Software Foundation, Inc., 59 Temple Place - Suite 330,
|
|
|
|
* Boston, MA 02111-1307, USA.
|
|
|
|
*/
|
gst/spectrum/Makefile.am: Link to base libraries
Original commit message from CVS:
* gst/spectrum/Makefile.am:
Link to base libraries
* gst/spectrum/demo-osssrc.c: (main):
use new threshhold property
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_set_sink_caps),
(gst_spectrum_get_sink_caps), (gst_spectrum_chain),
(gst_spectrum_change_state):
* gst/spectrum/gstspectrum.h:
Use gst_adapter, support multiple-channels, add threshold property for
result, add docs, fix resulting spectrum range (was including mirrored
results)
2006-05-21 16:23:23 +00:00
|
|
|
/**
|
|
|
|
* SECTION:element-spectrum
|
|
|
|
*
|
|
|
|
* <refsect2>
|
|
|
|
* The Spectrum element analyzes the frequency spectrum of an audio signal.
|
gst/spectrum/: port to use message to get results, cleanly exit when closing the window
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (on_window_destroy),
(draw_spectrum), (message_handler), (main):
* gst/spectrum/demo-osssrc.c: (on_window_destroy), (draw_spectrum),
(message_handler), (main):
port to use message to get results, cleanly exit when closing the window
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_get_property),
(gst_spectrum_set_caps), (gst_spectrum_start),
(gst_spectrum_message_new), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
port to derive from basetransform and send results via messages
(like level element)
2006-06-16 09:49:07 +00:00
|
|
|
* If <link linkend="GstSpectrum--message">message property</link> is #TRUE it
|
|
|
|
* sends analysis results as application message named
|
|
|
|
* <classname>"spectrum"</classname> after each interval of time given
|
|
|
|
* by the <link linkend="GstSpectrum--interval">interval property</link>.
|
|
|
|
* The message's structure contains two fields:
|
|
|
|
* <itemizedlist>
|
|
|
|
* <listitem>
|
|
|
|
* <para>
|
|
|
|
* #GstClockTime
|
|
|
|
* <classname>"endtime"</classname>:
|
|
|
|
* the end time of the buffer that triggered the message
|
|
|
|
* </para>
|
|
|
|
* </listitem>
|
|
|
|
* <listitem>
|
|
|
|
* <para>
|
Port GstSpectrum to GstAudioFilter and libgstfft, add support for int32, float and double, use floats for the message...
Original commit message from CVS:
* configure.ac:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-audiotest.c: (draw_spectrum),
(message_handler), (main):
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (message_handler):
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_start),
(gst_spectrum_setup), (gst_spectrum_message_new),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Port GstSpectrum to GstAudioFilter and libgstfft, add support
for int32, float and double, use floats for the message contents,
average all FFTs done in one interval for better results, use
a better windowing function, allow posting the phase in the message
and actually do an FFT with the requested number of bands instead
of interpolating.
* tests/check/elements/spectrum.c: (GST_START_TEST),
(spectrum_suite):
Improve the units tests by checking for a 11025Hz sine wave
and add unit tests for all 4 supported sample types.
2007-09-06 07:21:22 +00:00
|
|
|
* #GstValueList of #gfloat
|
|
|
|
* <classname>"magnitude"</classname>:
|
gst/spectrum/: port to use message to get results, cleanly exit when closing the window
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (on_window_destroy),
(draw_spectrum), (message_handler), (main):
* gst/spectrum/demo-osssrc.c: (on_window_destroy), (draw_spectrum),
(message_handler), (main):
port to use message to get results, cleanly exit when closing the window
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_get_property),
(gst_spectrum_set_caps), (gst_spectrum_start),
(gst_spectrum_message_new), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
port to derive from basetransform and send results via messages
(like level element)
2006-06-16 09:49:07 +00:00
|
|
|
* the level for each frequency band. A value of 0 maps to the
|
|
|
|
* db value given by the
|
|
|
|
* <link linkend="GstSpectrum--threshold">threshold property.</link>.
|
|
|
|
* </para>
|
|
|
|
* </listitem>
|
Port GstSpectrum to GstAudioFilter and libgstfft, add support for int32, float and double, use floats for the message...
Original commit message from CVS:
* configure.ac:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-audiotest.c: (draw_spectrum),
(message_handler), (main):
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (message_handler):
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_start),
(gst_spectrum_setup), (gst_spectrum_message_new),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Port GstSpectrum to GstAudioFilter and libgstfft, add support
for int32, float and double, use floats for the message contents,
average all FFTs done in one interval for better results, use
a better windowing function, allow posting the phase in the message
and actually do an FFT with the requested number of bands instead
of interpolating.
* tests/check/elements/spectrum.c: (GST_START_TEST),
(spectrum_suite):
Improve the units tests by checking for a 11025Hz sine wave
and add unit tests for all 4 supported sample types.
2007-09-06 07:21:22 +00:00
|
|
|
* <listitem>
|
|
|
|
* <para>
|
|
|
|
* #GstValueList of #gfloat
|
|
|
|
* <classname>"phase"</classname>:
|
|
|
|
* the phase for each frequency band. The value is between -pi and pi.
|
|
|
|
* </para>
|
|
|
|
* </listitem>
|
|
|
|
|
gst/spectrum/Makefile.am: Link to base libraries
Original commit message from CVS:
* gst/spectrum/Makefile.am:
Link to base libraries
* gst/spectrum/demo-osssrc.c: (main):
use new threshhold property
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_set_sink_caps),
(gst_spectrum_get_sink_caps), (gst_spectrum_chain),
(gst_spectrum_change_state):
* gst/spectrum/gstspectrum.h:
Use gst_adapter, support multiple-channels, add threshold property for
result, add docs, fix resulting spectrum range (was including mirrored
results)
2006-05-21 16:23:23 +00:00
|
|
|
*
|
gst/spectrum/: port to use message to get results, cleanly exit when closing the window
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (on_window_destroy),
(draw_spectrum), (message_handler), (main):
* gst/spectrum/demo-osssrc.c: (on_window_destroy), (draw_spectrum),
(message_handler), (main):
port to use message to get results, cleanly exit when closing the window
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_get_property),
(gst_spectrum_set_caps), (gst_spectrum_start),
(gst_spectrum_message_new), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
port to derive from basetransform and send results via messages
(like level element)
2006-06-16 09:49:07 +00:00
|
|
|
* This element cannot be used with the gst-launch command in a sensible way.
|
|
|
|
* The included demo shows how to use it in an application.
|
gst/spectrum/Makefile.am: Link to base libraries
Original commit message from CVS:
* gst/spectrum/Makefile.am:
Link to base libraries
* gst/spectrum/demo-osssrc.c: (main):
use new threshhold property
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_set_sink_caps),
(gst_spectrum_get_sink_caps), (gst_spectrum_chain),
(gst_spectrum_change_state):
* gst/spectrum/gstspectrum.h:
Use gst_adapter, support multiple-channels, add threshold property for
result, add docs, fix resulting spectrum range (was including mirrored
results)
2006-05-21 16:23:23 +00:00
|
|
|
*
|
Port GstSpectrum to GstAudioFilter and libgstfft, add support for int32, float and double, use floats for the message...
Original commit message from CVS:
* configure.ac:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-audiotest.c: (draw_spectrum),
(message_handler), (main):
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (message_handler):
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_start),
(gst_spectrum_setup), (gst_spectrum_message_new),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Port GstSpectrum to GstAudioFilter and libgstfft, add support
for int32, float and double, use floats for the message contents,
average all FFTs done in one interval for better results, use
a better windowing function, allow posting the phase in the message
and actually do an FFT with the requested number of bands instead
of interpolating.
* tests/check/elements/spectrum.c: (GST_START_TEST),
(spectrum_suite):
Improve the units tests by checking for a 11025Hz sine wave
and add unit tests for all 4 supported sample types.
2007-09-06 07:21:22 +00:00
|
|
|
* Last reviewed on 2007-08-18 (0.10.5)
|
gst/spectrum/: port to use message to get results, cleanly exit when closing the window
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (on_window_destroy),
(draw_spectrum), (message_handler), (main):
* gst/spectrum/demo-osssrc.c: (on_window_destroy), (draw_spectrum),
(message_handler), (main):
port to use message to get results, cleanly exit when closing the window
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_get_property),
(gst_spectrum_set_caps), (gst_spectrum_start),
(gst_spectrum_message_new), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
port to derive from basetransform and send results via messages
(like level element)
2006-06-16 09:49:07 +00:00
|
|
|
* </refsect2>
|
gst/spectrum/Makefile.am: Link to base libraries
Original commit message from CVS:
* gst/spectrum/Makefile.am:
Link to base libraries
* gst/spectrum/demo-osssrc.c: (main):
use new threshhold property
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_set_sink_caps),
(gst_spectrum_get_sink_caps), (gst_spectrum_chain),
(gst_spectrum_change_state):
* gst/spectrum/gstspectrum.h:
Use gst_adapter, support multiple-channels, add threshold property for
result, add docs, fix resulting spectrum range (was including mirrored
results)
2006-05-21 16:23:23 +00:00
|
|
|
*/
|
2001-12-22 23:26:33 +00:00
|
|
|
|
2003-06-29 19:46:13 +00:00
|
|
|
#ifdef HAVE_CONFIG_H
|
|
|
|
#include "config.h"
|
|
|
|
#endif
|
2001-12-22 23:26:33 +00:00
|
|
|
#include <string.h>
|
Port GstSpectrum to GstAudioFilter and libgstfft, add support for int32, float and double, use floats for the message...
Original commit message from CVS:
* configure.ac:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-audiotest.c: (draw_spectrum),
(message_handler), (main):
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (message_handler):
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_start),
(gst_spectrum_setup), (gst_spectrum_message_new),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Port GstSpectrum to GstAudioFilter and libgstfft, add support
for int32, float and double, use floats for the message contents,
average all FFTs done in one interval for better results, use
a better windowing function, allow posting the phase in the message
and actually do an FFT with the requested number of bands instead
of interpolating.
* tests/check/elements/spectrum.c: (GST_START_TEST),
(spectrum_suite):
Improve the units tests by checking for a 11025Hz sine wave
and add unit tests for all 4 supported sample types.
2007-09-06 07:21:22 +00:00
|
|
|
#include <stdlib.h>
|
gst/spectrum/: port to use message to get results, cleanly exit when closing the window
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (on_window_destroy),
(draw_spectrum), (message_handler), (main):
* gst/spectrum/demo-osssrc.c: (on_window_destroy), (draw_spectrum),
(message_handler), (main):
port to use message to get results, cleanly exit when closing the window
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_get_property),
(gst_spectrum_set_caps), (gst_spectrum_start),
(gst_spectrum_message_new), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
port to derive from basetransform and send results via messages
(like level element)
2006-06-16 09:49:07 +00:00
|
|
|
#include <gst/audio/audio.h>
|
Port GstSpectrum to GstAudioFilter and libgstfft, add support for int32, float and double, use floats for the message...
Original commit message from CVS:
* configure.ac:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-audiotest.c: (draw_spectrum),
(message_handler), (main):
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (message_handler):
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_start),
(gst_spectrum_setup), (gst_spectrum_message_new),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Port GstSpectrum to GstAudioFilter and libgstfft, add support
for int32, float and double, use floats for the message contents,
average all FFTs done in one interval for better results, use
a better windowing function, allow posting the phase in the message
and actually do an FFT with the requested number of bands instead
of interpolating.
* tests/check/elements/spectrum.c: (GST_START_TEST),
(spectrum_suite):
Improve the units tests by checking for a 11025Hz sine wave
and add unit tests for all 4 supported sample types.
2007-09-06 07:21:22 +00:00
|
|
|
#include <gst/audio/gstaudiofilter.h>
|
|
|
|
#include <math.h>
|
2001-12-22 23:26:33 +00:00
|
|
|
#include "gstspectrum.h"
|
|
|
|
|
Port GstSpectrum to GstAudioFilter and libgstfft, add support for int32, float and double, use floats for the message...
Original commit message from CVS:
* configure.ac:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-audiotest.c: (draw_spectrum),
(message_handler), (main):
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (message_handler):
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_start),
(gst_spectrum_setup), (gst_spectrum_message_new),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Port GstSpectrum to GstAudioFilter and libgstfft, add support
for int32, float and double, use floats for the message contents,
average all FFTs done in one interval for better results, use
a better windowing function, allow posting the phase in the message
and actually do an FFT with the requested number of bands instead
of interpolating.
* tests/check/elements/spectrum.c: (GST_START_TEST),
(spectrum_suite):
Improve the units tests by checking for a 11025Hz sine wave
and add unit tests for all 4 supported sample types.
2007-09-06 07:21:22 +00:00
|
|
|
#include <gst/fft/gstfft.h>
|
|
|
|
#include <gst/fft/gstffts16.h>
|
|
|
|
#include <gst/fft/gstffts32.h>
|
|
|
|
#include <gst/fft/gstfftf32.h>
|
|
|
|
#include <gst/fft/gstfftf64.h>
|
|
|
|
|
2006-05-20 22:42:15 +00:00
|
|
|
GST_DEBUG_CATEGORY_STATIC (gst_spectrum_debug);
|
|
|
|
#define GST_CAT_DEFAULT gst_spectrum_debug
|
|
|
|
|
2002-09-18 19:02:52 +00:00
|
|
|
/* elementfactory information */
|
2006-04-25 21:56:38 +00:00
|
|
|
static const GstElementDetails gst_spectrum_details =
|
2004-03-14 22:34:33 +00:00
|
|
|
GST_ELEMENT_DETAILS ("Spectrum analyzer",
|
|
|
|
"Filter/Analyzer/Audio",
|
|
|
|
"Run an FFT on the audio signal, output spectrum data",
|
2006-05-21 16:41:44 +00:00
|
|
|
"Erik Walthinsen <omega@cse.ogi.edu>, "
|
Port GstSpectrum to GstAudioFilter and libgstfft, add support for int32, float and double, use floats for the message...
Original commit message from CVS:
* configure.ac:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-audiotest.c: (draw_spectrum),
(message_handler), (main):
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (message_handler):
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_start),
(gst_spectrum_setup), (gst_spectrum_message_new),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Port GstSpectrum to GstAudioFilter and libgstfft, add support
for int32, float and double, use floats for the message contents,
average all FFTs done in one interval for better results, use
a better windowing function, allow posting the phase in the message
and actually do an FFT with the requested number of bands instead
of interpolating.
* tests/check/elements/spectrum.c: (GST_START_TEST),
(spectrum_suite):
Improve the units tests by checking for a 11025Hz sine wave
and add unit tests for all 4 supported sample types.
2007-09-06 07:21:22 +00:00
|
|
|
"Stefan Kost <ensonic@users.sf.net>, "
|
|
|
|
"Sebastian Dröge <slomo@circular-chaos.org>");
|
|
|
|
|
|
|
|
#define ALLOWED_CAPS \
|
|
|
|
"audio/x-raw-int, " \
|
|
|
|
" width = (int) 16, " \
|
|
|
|
" depth = (int) 16, " \
|
|
|
|
" signed = (boolean) true, " \
|
|
|
|
" endianness = (int) BYTE_ORDER, " \
|
|
|
|
" rate = (int) [ 1, MAX ], " \
|
|
|
|
" channels = (int) [ 1, MAX ]; " \
|
|
|
|
"audio/x-raw-int, " \
|
|
|
|
" width = (int) 32, " \
|
|
|
|
" depth = (int) 32, " \
|
|
|
|
" signed = (boolean) true, " \
|
|
|
|
" endianness = (int) BYTE_ORDER, " \
|
|
|
|
" rate = (int) [ 1, MAX ], " \
|
|
|
|
" channels = (int) [ 1, MAX ]; " \
|
|
|
|
"audio/x-raw-float, " \
|
|
|
|
" width = (int) { 32, 64 }, " \
|
|
|
|
" endianness = (int) BYTE_ORDER, " \
|
|
|
|
" rate = (int) [ 1, MAX ], " \
|
|
|
|
" channels = (int) [ 1, MAX ]"
|
2001-12-22 23:26:33 +00:00
|
|
|
|
gst/spectrum/: port to use message to get results, cleanly exit when closing the window
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (on_window_destroy),
(draw_spectrum), (message_handler), (main):
* gst/spectrum/demo-osssrc.c: (on_window_destroy), (draw_spectrum),
(message_handler), (main):
port to use message to get results, cleanly exit when closing the window
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_get_property),
(gst_spectrum_set_caps), (gst_spectrum_start),
(gst_spectrum_message_new), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
port to derive from basetransform and send results via messages
(like level element)
2006-06-16 09:49:07 +00:00
|
|
|
/* Spectrum properties */
|
2007-03-06 13:57:55 +00:00
|
|
|
#define DEFAULT_SIGNAL_SPECTRUM TRUE
|
Port GstSpectrum to GstAudioFilter and libgstfft, add support for int32, float and double, use floats for the message...
Original commit message from CVS:
* configure.ac:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-audiotest.c: (draw_spectrum),
(message_handler), (main):
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (message_handler):
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_start),
(gst_spectrum_setup), (gst_spectrum_message_new),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Port GstSpectrum to GstAudioFilter and libgstfft, add support
for int32, float and double, use floats for the message contents,
average all FFTs done in one interval for better results, use
a better windowing function, allow posting the phase in the message
and actually do an FFT with the requested number of bands instead
of interpolating.
* tests/check/elements/spectrum.c: (GST_START_TEST),
(spectrum_suite):
Improve the units tests by checking for a 11025Hz sine wave
and add unit tests for all 4 supported sample types.
2007-09-06 07:21:22 +00:00
|
|
|
#define DEFAULT_SIGNAL_MAGNITUDE TRUE
|
|
|
|
#define DEFAULT_SIGNAL_PHASE FALSE
|
2007-03-06 13:57:55 +00:00
|
|
|
#define DEFAULT_SIGNAL_INTERVAL (GST_SECOND / 10)
|
|
|
|
#define DEFAULT_BANDS 128
|
|
|
|
#define DEFAULT_THRESHOLD -60
|
|
|
|
|
configure.ac: Depend on gstreamer-0.10.12.1. gst/equalizer/gstiirequalizer.c (ARG_BAND_WIDTH, _do_init, ARG_GAIN, _Gs...
Original commit message from CVS:
* configure.ac:
Depend on gstreamer-0.10.12.1.
* gst/equalizer/gstiirequalizer.c (ARG_BAND_WIDTH, _do_init, ARG_GAIN,
_GstIirEqualizerBand, object, _GstIirEqualizerBandClass,
parent_class, gst_iir_equalizer_band_set_property,
gst_iir_equalizer_band_class_init, gst_iir_equalizer_band_get_type,
gst_iir_equalizer_child_proxy_get_child_by_index,
gst_iir_equalizer_child_proxy_get_children_count,
gst_iir_equalizer_child_proxy_interface_init, setup_filter,
gst_iir_equalizer_compute_frequencies,
gst_iir_equalizer_set_property, gst_iir_equalizer_get_property,
plugin_init):
* gst/equalizer/gstiirequalizer.h (audiofilter):
* gst/equalizer/gstiirequalizernbands.c (ARG_NUM_BANDS,
gst_iir_equalizer_nbands_base_init, gst_iir_equalizer_nbands_init,
gst_iir_equalizer_nbands_set_property):
Use new locking macros.
* gst/filter/gstbpwsinc.c (bpwsinc_set_caps):
Add fixme.
* gst/spectrum/gstspectrum.c (SPECTRUM_WINDOW_BASE,
SPECTRUM_WINDOW_LEN, gst_spectrum_init, gst_spectrum_set_property,
gst_spectrum_event, gst_spectrum_transform_ip):
Use new locking macros. Turn two fixed values into #defines.
2007-05-22 11:14:13 +00:00
|
|
|
#define SPECTRUM_WINDOW_BASE 9
|
|
|
|
#define SPECTRUM_WINDOW_LEN (1 << (SPECTRUM_WINDOW_BASE+1))
|
|
|
|
|
2004-03-14 22:34:33 +00:00
|
|
|
enum
|
|
|
|
{
|
gst/spectrum/: port to use message to get results, cleanly exit when closing the window
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (on_window_destroy),
(draw_spectrum), (message_handler), (main):
* gst/spectrum/demo-osssrc.c: (on_window_destroy), (draw_spectrum),
(message_handler), (main):
port to use message to get results, cleanly exit when closing the window
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_get_property),
(gst_spectrum_set_caps), (gst_spectrum_start),
(gst_spectrum_message_new), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
port to derive from basetransform and send results via messages
(like level element)
2006-06-16 09:49:07 +00:00
|
|
|
PROP_0,
|
|
|
|
PROP_SIGNAL_SPECTRUM,
|
Port GstSpectrum to GstAudioFilter and libgstfft, add support for int32, float and double, use floats for the message...
Original commit message from CVS:
* configure.ac:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-audiotest.c: (draw_spectrum),
(message_handler), (main):
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (message_handler):
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_start),
(gst_spectrum_setup), (gst_spectrum_message_new),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Port GstSpectrum to GstAudioFilter and libgstfft, add support
for int32, float and double, use floats for the message contents,
average all FFTs done in one interval for better results, use
a better windowing function, allow posting the phase in the message
and actually do an FFT with the requested number of bands instead
of interpolating.
* tests/check/elements/spectrum.c: (GST_START_TEST),
(spectrum_suite):
Improve the units tests by checking for a 11025Hz sine wave
and add unit tests for all 4 supported sample types.
2007-09-06 07:21:22 +00:00
|
|
|
PROP_SIGNAL_MAGNITUDE,
|
|
|
|
PROP_SIGNAL_PHASE,
|
gst/spectrum/: port to use message to get results, cleanly exit when closing the window
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (on_window_destroy),
(draw_spectrum), (message_handler), (main):
* gst/spectrum/demo-osssrc.c: (on_window_destroy), (draw_spectrum),
(message_handler), (main):
port to use message to get results, cleanly exit when closing the window
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_get_property),
(gst_spectrum_set_caps), (gst_spectrum_start),
(gst_spectrum_message_new), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
port to derive from basetransform and send results via messages
(like level element)
2006-06-16 09:49:07 +00:00
|
|
|
PROP_SIGNAL_INTERVAL,
|
|
|
|
PROP_BANDS,
|
|
|
|
PROP_THRESHOLD
|
2001-12-22 23:26:33 +00:00
|
|
|
};
|
|
|
|
|
Port GstSpectrum to GstAudioFilter and libgstfft, add support for int32, float and double, use floats for the message...
Original commit message from CVS:
* configure.ac:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-audiotest.c: (draw_spectrum),
(message_handler), (main):
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (message_handler):
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_start),
(gst_spectrum_setup), (gst_spectrum_message_new),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Port GstSpectrum to GstAudioFilter and libgstfft, add support
for int32, float and double, use floats for the message contents,
average all FFTs done in one interval for better results, use
a better windowing function, allow posting the phase in the message
and actually do an FFT with the requested number of bands instead
of interpolating.
* tests/check/elements/spectrum.c: (GST_START_TEST),
(spectrum_suite):
Improve the units tests by checking for a 11025Hz sine wave
and add unit tests for all 4 supported sample types.
2007-09-06 07:21:22 +00:00
|
|
|
GST_BOILERPLATE (GstSpectrum, gst_spectrum, GstAudioFilter,
|
|
|
|
GST_TYPE_AUDIO_FILTER);
|
2001-12-22 23:26:33 +00:00
|
|
|
|
2006-05-20 22:42:15 +00:00
|
|
|
static void gst_spectrum_dispose (GObject * object);
|
2004-03-14 22:34:33 +00:00
|
|
|
static void gst_spectrum_set_property (GObject * object, guint prop_id,
|
|
|
|
const GValue * value, GParamSpec * pspec);
|
gst/spectrum/: port to use message to get results, cleanly exit when closing the window
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (on_window_destroy),
(draw_spectrum), (message_handler), (main):
* gst/spectrum/demo-osssrc.c: (on_window_destroy), (draw_spectrum),
(message_handler), (main):
port to use message to get results, cleanly exit when closing the window
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_get_property),
(gst_spectrum_set_caps), (gst_spectrum_start),
(gst_spectrum_message_new), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
port to derive from basetransform and send results via messages
(like level element)
2006-06-16 09:49:07 +00:00
|
|
|
static void gst_spectrum_get_property (GObject * object, guint prop_id,
|
|
|
|
GValue * value, GParamSpec * pspec);
|
|
|
|
static gboolean gst_spectrum_start (GstBaseTransform * trans);
|
2006-09-12 20:18:55 +00:00
|
|
|
static gboolean gst_spectrum_stop (GstBaseTransform * trans);
|
|
|
|
static gboolean gst_spectrum_event (GstBaseTransform * trans, GstEvent * event);
|
gst/spectrum/: port to use message to get results, cleanly exit when closing the window
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (on_window_destroy),
(draw_spectrum), (message_handler), (main):
* gst/spectrum/demo-osssrc.c: (on_window_destroy), (draw_spectrum),
(message_handler), (main):
port to use message to get results, cleanly exit when closing the window
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_get_property),
(gst_spectrum_set_caps), (gst_spectrum_start),
(gst_spectrum_message_new), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
port to derive from basetransform and send results via messages
(like level element)
2006-06-16 09:49:07 +00:00
|
|
|
static GstFlowReturn gst_spectrum_transform_ip (GstBaseTransform * trans,
|
|
|
|
GstBuffer * in);
|
Port GstSpectrum to GstAudioFilter and libgstfft, add support for int32, float and double, use floats for the message...
Original commit message from CVS:
* configure.ac:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-audiotest.c: (draw_spectrum),
(message_handler), (main):
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (message_handler):
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_start),
(gst_spectrum_setup), (gst_spectrum_message_new),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Port GstSpectrum to GstAudioFilter and libgstfft, add support
for int32, float and double, use floats for the message contents,
average all FFTs done in one interval for better results, use
a better windowing function, allow posting the phase in the message
and actually do an FFT with the requested number of bands instead
of interpolating.
* tests/check/elements/spectrum.c: (GST_START_TEST),
(spectrum_suite):
Improve the units tests by checking for a 11025Hz sine wave
and add unit tests for all 4 supported sample types.
2007-09-06 07:21:22 +00:00
|
|
|
static gboolean gst_spectrum_setup (GstAudioFilter * base,
|
|
|
|
GstRingBufferSpec * format);
|
gst/spectrum/: port to use message to get results, cleanly exit when closing the window
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (on_window_destroy),
(draw_spectrum), (message_handler), (main):
* gst/spectrum/demo-osssrc.c: (on_window_destroy), (draw_spectrum),
(message_handler), (main):
port to use message to get results, cleanly exit when closing the window
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_get_property),
(gst_spectrum_set_caps), (gst_spectrum_start),
(gst_spectrum_message_new), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
port to derive from basetransform and send results via messages
(like level element)
2006-06-16 09:49:07 +00:00
|
|
|
|
Port GstSpectrum to GstAudioFilter and libgstfft, add support for int32, float and double, use floats for the message...
Original commit message from CVS:
* configure.ac:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-audiotest.c: (draw_spectrum),
(message_handler), (main):
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (message_handler):
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_start),
(gst_spectrum_setup), (gst_spectrum_message_new),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Port GstSpectrum to GstAudioFilter and libgstfft, add support
for int32, float and double, use floats for the message contents,
average all FFTs done in one interval for better results, use
a better windowing function, allow posting the phase in the message
and actually do an FFT with the requested number of bands instead
of interpolating.
* tests/check/elements/spectrum.c: (GST_START_TEST),
(spectrum_suite):
Improve the units tests by checking for a 11025Hz sine wave
and add unit tests for all 4 supported sample types.
2007-09-06 07:21:22 +00:00
|
|
|
static void process_s16 (GstSpectrum * spectrum, const gint16 * samples);
|
|
|
|
static void process_s32 (GstSpectrum * spectrum, const gint32 * samples);
|
|
|
|
static void process_f32 (GstSpectrum * spectrum, const gfloat * samples);
|
|
|
|
static void process_f64 (GstSpectrum * spectrum, const gdouble * samples);
|
2001-12-22 23:26:33 +00:00
|
|
|
|
2003-11-02 22:34:11 +00:00
|
|
|
static void
|
|
|
|
gst_spectrum_base_init (gpointer g_class)
|
|
|
|
{
|
|
|
|
GstElementClass *element_class = GST_ELEMENT_CLASS (g_class);
|
Port GstSpectrum to GstAudioFilter and libgstfft, add support for int32, float and double, use floats for the message...
Original commit message from CVS:
* configure.ac:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-audiotest.c: (draw_spectrum),
(message_handler), (main):
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (message_handler):
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_start),
(gst_spectrum_setup), (gst_spectrum_message_new),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Port GstSpectrum to GstAudioFilter and libgstfft, add support
for int32, float and double, use floats for the message contents,
average all FFTs done in one interval for better results, use
a better windowing function, allow posting the phase in the message
and actually do an FFT with the requested number of bands instead
of interpolating.
* tests/check/elements/spectrum.c: (GST_START_TEST),
(spectrum_suite):
Improve the units tests by checking for a 11025Hz sine wave
and add unit tests for all 4 supported sample types.
2007-09-06 07:21:22 +00:00
|
|
|
GstCaps *caps;
|
2003-11-02 22:34:11 +00:00
|
|
|
|
|
|
|
gst_element_class_set_details (element_class, &gst_spectrum_details);
|
Port GstSpectrum to GstAudioFilter and libgstfft, add support for int32, float and double, use floats for the message...
Original commit message from CVS:
* configure.ac:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-audiotest.c: (draw_spectrum),
(message_handler), (main):
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (message_handler):
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_start),
(gst_spectrum_setup), (gst_spectrum_message_new),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Port GstSpectrum to GstAudioFilter and libgstfft, add support
for int32, float and double, use floats for the message contents,
average all FFTs done in one interval for better results, use
a better windowing function, allow posting the phase in the message
and actually do an FFT with the requested number of bands instead
of interpolating.
* tests/check/elements/spectrum.c: (GST_START_TEST),
(spectrum_suite):
Improve the units tests by checking for a 11025Hz sine wave
and add unit tests for all 4 supported sample types.
2007-09-06 07:21:22 +00:00
|
|
|
|
|
|
|
caps = gst_caps_from_string (ALLOWED_CAPS);
|
|
|
|
gst_audio_filter_class_add_pad_templates (GST_AUDIO_FILTER_CLASS (g_class),
|
|
|
|
caps);
|
|
|
|
gst_caps_unref (caps);
|
2003-11-02 22:34:11 +00:00
|
|
|
}
|
2006-05-20 22:42:15 +00:00
|
|
|
|
2001-12-22 23:26:33 +00:00
|
|
|
static void
|
2004-03-14 22:34:33 +00:00
|
|
|
gst_spectrum_class_init (GstSpectrumClass * klass)
|
2001-12-22 23:26:33 +00:00
|
|
|
{
|
gst/spectrum/Makefile.am: Link to base libraries
Original commit message from CVS:
* gst/spectrum/Makefile.am:
Link to base libraries
* gst/spectrum/demo-osssrc.c: (main):
use new threshhold property
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_set_sink_caps),
(gst_spectrum_get_sink_caps), (gst_spectrum_chain),
(gst_spectrum_change_state):
* gst/spectrum/gstspectrum.h:
Use gst_adapter, support multiple-channels, add threshold property for
result, add docs, fix resulting spectrum range (was including mirrored
results)
2006-05-21 16:23:23 +00:00
|
|
|
GObjectClass *gobject_class = G_OBJECT_CLASS (klass);
|
gst/spectrum/: port to use message to get results, cleanly exit when closing the window
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (on_window_destroy),
(draw_spectrum), (message_handler), (main):
* gst/spectrum/demo-osssrc.c: (on_window_destroy), (draw_spectrum),
(message_handler), (main):
port to use message to get results, cleanly exit when closing the window
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_get_property),
(gst_spectrum_set_caps), (gst_spectrum_start),
(gst_spectrum_message_new), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
port to derive from basetransform and send results via messages
(like level element)
2006-06-16 09:49:07 +00:00
|
|
|
GstBaseTransformClass *trans_class = GST_BASE_TRANSFORM_CLASS (klass);
|
Port GstSpectrum to GstAudioFilter and libgstfft, add support for int32, float and double, use floats for the message...
Original commit message from CVS:
* configure.ac:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-audiotest.c: (draw_spectrum),
(message_handler), (main):
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (message_handler):
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_start),
(gst_spectrum_setup), (gst_spectrum_message_new),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Port GstSpectrum to GstAudioFilter and libgstfft, add support
for int32, float and double, use floats for the message contents,
average all FFTs done in one interval for better results, use
a better windowing function, allow posting the phase in the message
and actually do an FFT with the requested number of bands instead
of interpolating.
* tests/check/elements/spectrum.c: (GST_START_TEST),
(spectrum_suite):
Improve the units tests by checking for a 11025Hz sine wave
and add unit tests for all 4 supported sample types.
2007-09-06 07:21:22 +00:00
|
|
|
GstAudioFilterClass *filter_class = GST_AUDIO_FILTER_CLASS (klass);
|
2001-12-22 23:26:33 +00:00
|
|
|
|
|
|
|
gobject_class->set_property = gst_spectrum_set_property;
|
gst/spectrum/: port to use message to get results, cleanly exit when closing the window
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (on_window_destroy),
(draw_spectrum), (message_handler), (main):
* gst/spectrum/demo-osssrc.c: (on_window_destroy), (draw_spectrum),
(message_handler), (main):
port to use message to get results, cleanly exit when closing the window
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_get_property),
(gst_spectrum_set_caps), (gst_spectrum_start),
(gst_spectrum_message_new), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
port to derive from basetransform and send results via messages
(like level element)
2006-06-16 09:49:07 +00:00
|
|
|
gobject_class->get_property = gst_spectrum_get_property;
|
2006-05-20 22:42:15 +00:00
|
|
|
gobject_class->dispose = gst_spectrum_dispose;
|
|
|
|
|
gst/spectrum/: port to use message to get results, cleanly exit when closing the window
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (on_window_destroy),
(draw_spectrum), (message_handler), (main):
* gst/spectrum/demo-osssrc.c: (on_window_destroy), (draw_spectrum),
(message_handler), (main):
port to use message to get results, cleanly exit when closing the window
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_get_property),
(gst_spectrum_set_caps), (gst_spectrum_start),
(gst_spectrum_message_new), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
port to derive from basetransform and send results via messages
(like level element)
2006-06-16 09:49:07 +00:00
|
|
|
trans_class->start = GST_DEBUG_FUNCPTR (gst_spectrum_start);
|
2006-09-12 20:18:55 +00:00
|
|
|
trans_class->stop = GST_DEBUG_FUNCPTR (gst_spectrum_stop);
|
|
|
|
trans_class->event = GST_DEBUG_FUNCPTR (gst_spectrum_event);
|
gst/spectrum/: port to use message to get results, cleanly exit when closing the window
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (on_window_destroy),
(draw_spectrum), (message_handler), (main):
* gst/spectrum/demo-osssrc.c: (on_window_destroy), (draw_spectrum),
(message_handler), (main):
port to use message to get results, cleanly exit when closing the window
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_get_property),
(gst_spectrum_set_caps), (gst_spectrum_start),
(gst_spectrum_message_new), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
port to derive from basetransform and send results via messages
(like level element)
2006-06-16 09:49:07 +00:00
|
|
|
trans_class->transform_ip = GST_DEBUG_FUNCPTR (gst_spectrum_transform_ip);
|
|
|
|
trans_class->passthrough_on_same_caps = TRUE;
|
|
|
|
|
Port GstSpectrum to GstAudioFilter and libgstfft, add support for int32, float and double, use floats for the message...
Original commit message from CVS:
* configure.ac:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-audiotest.c: (draw_spectrum),
(message_handler), (main):
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (message_handler):
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_start),
(gst_spectrum_setup), (gst_spectrum_message_new),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Port GstSpectrum to GstAudioFilter and libgstfft, add support
for int32, float and double, use floats for the message contents,
average all FFTs done in one interval for better results, use
a better windowing function, allow posting the phase in the message
and actually do an FFT with the requested number of bands instead
of interpolating.
* tests/check/elements/spectrum.c: (GST_START_TEST),
(spectrum_suite):
Improve the units tests by checking for a 11025Hz sine wave
and add unit tests for all 4 supported sample types.
2007-09-06 07:21:22 +00:00
|
|
|
filter_class->setup = GST_DEBUG_FUNCPTR (gst_spectrum_setup);
|
|
|
|
|
gst/spectrum/: port to use message to get results, cleanly exit when closing the window
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (on_window_destroy),
(draw_spectrum), (message_handler), (main):
* gst/spectrum/demo-osssrc.c: (on_window_destroy), (draw_spectrum),
(message_handler), (main):
port to use message to get results, cleanly exit when closing the window
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_get_property),
(gst_spectrum_set_caps), (gst_spectrum_start),
(gst_spectrum_message_new), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
port to derive from basetransform and send results via messages
(like level element)
2006-06-16 09:49:07 +00:00
|
|
|
g_object_class_install_property (gobject_class, PROP_SIGNAL_SPECTRUM,
|
2006-07-12 09:28:46 +00:00
|
|
|
g_param_spec_boolean ("message", "Message",
|
gst/spectrum/: port to use message to get results, cleanly exit when closing the window
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (on_window_destroy),
(draw_spectrum), (message_handler), (main):
* gst/spectrum/demo-osssrc.c: (on_window_destroy), (draw_spectrum),
(message_handler), (main):
port to use message to get results, cleanly exit when closing the window
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_get_property),
(gst_spectrum_set_caps), (gst_spectrum_start),
(gst_spectrum_message_new), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
port to derive from basetransform and send results via messages
(like level element)
2006-06-16 09:49:07 +00:00
|
|
|
"Post a level message for each passed interval",
|
2007-03-06 13:57:55 +00:00
|
|
|
DEFAULT_SIGNAL_SPECTRUM, G_PARAM_READWRITE));
|
gst/spectrum/: port to use message to get results, cleanly exit when closing the window
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (on_window_destroy),
(draw_spectrum), (message_handler), (main):
* gst/spectrum/demo-osssrc.c: (on_window_destroy), (draw_spectrum),
(message_handler), (main):
port to use message to get results, cleanly exit when closing the window
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_get_property),
(gst_spectrum_set_caps), (gst_spectrum_start),
(gst_spectrum_message_new), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
port to derive from basetransform and send results via messages
(like level element)
2006-06-16 09:49:07 +00:00
|
|
|
|
Port GstSpectrum to GstAudioFilter and libgstfft, add support for int32, float and double, use floats for the message...
Original commit message from CVS:
* configure.ac:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-audiotest.c: (draw_spectrum),
(message_handler), (main):
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (message_handler):
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_start),
(gst_spectrum_setup), (gst_spectrum_message_new),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Port GstSpectrum to GstAudioFilter and libgstfft, add support
for int32, float and double, use floats for the message contents,
average all FFTs done in one interval for better results, use
a better windowing function, allow posting the phase in the message
and actually do an FFT with the requested number of bands instead
of interpolating.
* tests/check/elements/spectrum.c: (GST_START_TEST),
(spectrum_suite):
Improve the units tests by checking for a 11025Hz sine wave
and add unit tests for all 4 supported sample types.
2007-09-06 07:21:22 +00:00
|
|
|
g_object_class_install_property (gobject_class, PROP_SIGNAL_MAGNITUDE,
|
|
|
|
g_param_spec_boolean ("message-magnitude", "Magnitude",
|
|
|
|
"Post the magnitude of the spectrum",
|
|
|
|
DEFAULT_SIGNAL_MAGNITUDE, G_PARAM_READWRITE));
|
|
|
|
|
|
|
|
g_object_class_install_property (gobject_class, PROP_SIGNAL_PHASE,
|
|
|
|
g_param_spec_boolean ("message-phase", "Phase",
|
|
|
|
"Post the phase of the spectrum",
|
|
|
|
DEFAULT_SIGNAL_PHASE, G_PARAM_READWRITE));
|
|
|
|
|
gst/spectrum/: port to use message to get results, cleanly exit when closing the window
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (on_window_destroy),
(draw_spectrum), (message_handler), (main):
* gst/spectrum/demo-osssrc.c: (on_window_destroy), (draw_spectrum),
(message_handler), (main):
port to use message to get results, cleanly exit when closing the window
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_get_property),
(gst_spectrum_set_caps), (gst_spectrum_start),
(gst_spectrum_message_new), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
port to derive from basetransform and send results via messages
(like level element)
2006-06-16 09:49:07 +00:00
|
|
|
g_object_class_install_property (gobject_class, PROP_SIGNAL_INTERVAL,
|
|
|
|
g_param_spec_uint64 ("interval", "Interval",
|
|
|
|
"Interval of time between message posts (in nanoseconds)",
|
2007-03-06 13:57:55 +00:00
|
|
|
1, G_MAXUINT64, DEFAULT_SIGNAL_INTERVAL, G_PARAM_READWRITE));
|
gst/spectrum/Makefile.am: Link to base libraries
Original commit message from CVS:
* gst/spectrum/Makefile.am:
Link to base libraries
* gst/spectrum/demo-osssrc.c: (main):
use new threshhold property
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_set_sink_caps),
(gst_spectrum_get_sink_caps), (gst_spectrum_chain),
(gst_spectrum_change_state):
* gst/spectrum/gstspectrum.h:
Use gst_adapter, support multiple-channels, add threshold property for
result, add docs, fix resulting spectrum range (was including mirrored
results)
2006-05-21 16:23:23 +00:00
|
|
|
|
gst/spectrum/: port to use message to get results, cleanly exit when closing the window
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (on_window_destroy),
(draw_spectrum), (message_handler), (main):
* gst/spectrum/demo-osssrc.c: (on_window_destroy), (draw_spectrum),
(message_handler), (main):
port to use message to get results, cleanly exit when closing the window
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_get_property),
(gst_spectrum_set_caps), (gst_spectrum_start),
(gst_spectrum_message_new), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
port to derive from basetransform and send results via messages
(like level element)
2006-06-16 09:49:07 +00:00
|
|
|
g_object_class_install_property (gobject_class, PROP_BANDS,
|
|
|
|
g_param_spec_uint ("bands", "Bands", "number of frequency bands",
|
2007-03-06 13:57:55 +00:00
|
|
|
0, G_MAXUINT, DEFAULT_BANDS, G_PARAM_READWRITE));
|
gst/spectrum/Makefile.am: Link to base libraries
Original commit message from CVS:
* gst/spectrum/Makefile.am:
Link to base libraries
* gst/spectrum/demo-osssrc.c: (main):
use new threshhold property
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_set_sink_caps),
(gst_spectrum_get_sink_caps), (gst_spectrum_chain),
(gst_spectrum_change_state):
* gst/spectrum/gstspectrum.h:
Use gst_adapter, support multiple-channels, add threshold property for
result, add docs, fix resulting spectrum range (was including mirrored
results)
2006-05-21 16:23:23 +00:00
|
|
|
|
gst/spectrum/: port to use message to get results, cleanly exit when closing the window
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (on_window_destroy),
(draw_spectrum), (message_handler), (main):
* gst/spectrum/demo-osssrc.c: (on_window_destroy), (draw_spectrum),
(message_handler), (main):
port to use message to get results, cleanly exit when closing the window
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_get_property),
(gst_spectrum_set_caps), (gst_spectrum_start),
(gst_spectrum_message_new), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
port to derive from basetransform and send results via messages
(like level element)
2006-06-16 09:49:07 +00:00
|
|
|
g_object_class_install_property (gobject_class, PROP_THRESHOLD,
|
2006-05-21 16:41:44 +00:00
|
|
|
g_param_spec_int ("threshold", "Threshold",
|
2007-03-06 13:57:55 +00:00
|
|
|
"db threshold for result, maps to 0", G_MININT, 0, DEFAULT_THRESHOLD,
|
gst/spectrum/: port to use message to get results, cleanly exit when closing the window
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (on_window_destroy),
(draw_spectrum), (message_handler), (main):
* gst/spectrum/demo-osssrc.c: (on_window_destroy), (draw_spectrum),
(message_handler), (main):
port to use message to get results, cleanly exit when closing the window
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_get_property),
(gst_spectrum_set_caps), (gst_spectrum_start),
(gst_spectrum_message_new), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
port to derive from basetransform and send results via messages
(like level element)
2006-06-16 09:49:07 +00:00
|
|
|
G_PARAM_READWRITE));
|
2006-05-20 22:42:15 +00:00
|
|
|
|
2006-05-21 16:41:44 +00:00
|
|
|
GST_DEBUG_CATEGORY_INIT (gst_spectrum_debug, "spectrum", 0,
|
|
|
|
"audio spectrum analyser element");
|
2001-12-22 23:26:33 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
2006-05-21 16:41:44 +00:00
|
|
|
gst_spectrum_init (GstSpectrum * spectrum, GstSpectrumClass * g_class)
|
2001-12-22 23:26:33 +00:00
|
|
|
{
|
gst/spectrum/Makefile.am: Link to base libraries
Original commit message from CVS:
* gst/spectrum/Makefile.am:
Link to base libraries
* gst/spectrum/demo-osssrc.c: (main):
use new threshhold property
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_set_sink_caps),
(gst_spectrum_get_sink_caps), (gst_spectrum_chain),
(gst_spectrum_change_state):
* gst/spectrum/gstspectrum.h:
Use gst_adapter, support multiple-channels, add threshold property for
result, add docs, fix resulting spectrum range (was including mirrored
results)
2006-05-21 16:23:23 +00:00
|
|
|
spectrum->adapter = gst_adapter_new ();
|
|
|
|
|
2007-03-06 13:57:55 +00:00
|
|
|
spectrum->message = DEFAULT_SIGNAL_SPECTRUM;
|
Port GstSpectrum to GstAudioFilter and libgstfft, add support for int32, float and double, use floats for the message...
Original commit message from CVS:
* configure.ac:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-audiotest.c: (draw_spectrum),
(message_handler), (main):
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (message_handler):
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_start),
(gst_spectrum_setup), (gst_spectrum_message_new),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Port GstSpectrum to GstAudioFilter and libgstfft, add support
for int32, float and double, use floats for the message contents,
average all FFTs done in one interval for better results, use
a better windowing function, allow posting the phase in the message
and actually do an FFT with the requested number of bands instead
of interpolating.
* tests/check/elements/spectrum.c: (GST_START_TEST),
(spectrum_suite):
Improve the units tests by checking for a 11025Hz sine wave
and add unit tests for all 4 supported sample types.
2007-09-06 07:21:22 +00:00
|
|
|
spectrum->message_magnitude = DEFAULT_SIGNAL_MAGNITUDE;
|
|
|
|
spectrum->message_phase = DEFAULT_SIGNAL_PHASE;
|
2007-03-06 13:57:55 +00:00
|
|
|
spectrum->interval = DEFAULT_SIGNAL_INTERVAL;
|
|
|
|
spectrum->bands = DEFAULT_BANDS;
|
|
|
|
spectrum->threshold = DEFAULT_THRESHOLD;
|
2006-05-20 22:42:15 +00:00
|
|
|
|
Port GstSpectrum to GstAudioFilter and libgstfft, add support for int32, float and double, use floats for the message...
Original commit message from CVS:
* configure.ac:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-audiotest.c: (draw_spectrum),
(message_handler), (main):
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (message_handler):
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_start),
(gst_spectrum_setup), (gst_spectrum_message_new),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Port GstSpectrum to GstAudioFilter and libgstfft, add support
for int32, float and double, use floats for the message contents,
average all FFTs done in one interval for better results, use
a better windowing function, allow posting the phase in the message
and actually do an FFT with the requested number of bands instead
of interpolating.
* tests/check/elements/spectrum.c: (GST_START_TEST),
(spectrum_suite):
Improve the units tests by checking for a 11025Hz sine wave
and add unit tests for all 4 supported sample types.
2007-09-06 07:21:22 +00:00
|
|
|
spectrum->spect_magnitude = g_new0 (gfloat, spectrum->bands);
|
|
|
|
spectrum->spect_phase = g_new0 (gfloat, spectrum->bands);
|
2006-05-20 22:42:15 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
gst_spectrum_dispose (GObject * object)
|
|
|
|
{
|
|
|
|
GstSpectrum *spectrum = GST_SPECTRUM (object);
|
|
|
|
|
gst/spectrum/Makefile.am: Link to base libraries
Original commit message from CVS:
* gst/spectrum/Makefile.am:
Link to base libraries
* gst/spectrum/demo-osssrc.c: (main):
use new threshhold property
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_set_sink_caps),
(gst_spectrum_get_sink_caps), (gst_spectrum_chain),
(gst_spectrum_change_state):
* gst/spectrum/gstspectrum.h:
Use gst_adapter, support multiple-channels, add threshold property for
result, add docs, fix resulting spectrum range (was including mirrored
results)
2006-05-21 16:23:23 +00:00
|
|
|
if (spectrum->adapter) {
|
|
|
|
g_object_unref (spectrum->adapter);
|
|
|
|
spectrum->adapter = NULL;
|
|
|
|
}
|
|
|
|
|
Port GstSpectrum to GstAudioFilter and libgstfft, add support for int32, float and double, use floats for the message...
Original commit message from CVS:
* configure.ac:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-audiotest.c: (draw_spectrum),
(message_handler), (main):
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (message_handler):
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_start),
(gst_spectrum_setup), (gst_spectrum_message_new),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Port GstSpectrum to GstAudioFilter and libgstfft, add support
for int32, float and double, use floats for the message contents,
average all FFTs done in one interval for better results, use
a better windowing function, allow posting the phase in the message
and actually do an FFT with the requested number of bands instead
of interpolating.
* tests/check/elements/spectrum.c: (GST_START_TEST),
(spectrum_suite):
Improve the units tests by checking for a 11025Hz sine wave
and add unit tests for all 4 supported sample types.
2007-09-06 07:21:22 +00:00
|
|
|
g_free (spectrum->in);
|
|
|
|
if (spectrum->fft_free_func) {
|
|
|
|
spectrum->fft_free_func (spectrum->fft_ctx);
|
|
|
|
spectrum->fft_ctx = NULL;
|
|
|
|
spectrum->fft_free_func = NULL;
|
|
|
|
}
|
|
|
|
g_free (spectrum->freqdata);
|
|
|
|
g_free (spectrum->spect_magnitude);
|
|
|
|
g_free (spectrum->spect_phase);
|
2006-05-20 22:42:15 +00:00
|
|
|
|
Port GstSpectrum to GstAudioFilter and libgstfft, add support for int32, float and double, use floats for the message...
Original commit message from CVS:
* configure.ac:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-audiotest.c: (draw_spectrum),
(message_handler), (main):
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (message_handler):
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_start),
(gst_spectrum_setup), (gst_spectrum_message_new),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Port GstSpectrum to GstAudioFilter and libgstfft, add support
for int32, float and double, use floats for the message contents,
average all FFTs done in one interval for better results, use
a better windowing function, allow posting the phase in the message
and actually do an FFT with the requested number of bands instead
of interpolating.
* tests/check/elements/spectrum.c: (GST_START_TEST),
(spectrum_suite):
Improve the units tests by checking for a 11025Hz sine wave
and add unit tests for all 4 supported sample types.
2007-09-06 07:21:22 +00:00
|
|
|
spectrum->in = NULL;
|
|
|
|
spectrum->spect_magnitude = NULL;
|
|
|
|
spectrum->spect_phase = NULL;
|
|
|
|
spectrum->freqdata = NULL;
|
2006-09-11 18:02:39 +00:00
|
|
|
|
2006-05-20 22:42:15 +00:00
|
|
|
G_OBJECT_CLASS (parent_class)->dispose (object);
|
2001-12-22 23:26:33 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
2004-03-14 22:34:33 +00:00
|
|
|
gst_spectrum_set_property (GObject * object, guint prop_id,
|
|
|
|
const GValue * value, GParamSpec * pspec)
|
2001-12-22 23:26:33 +00:00
|
|
|
{
|
gst/spectrum/: port to use message to get results, cleanly exit when closing the window
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (on_window_destroy),
(draw_spectrum), (message_handler), (main):
* gst/spectrum/demo-osssrc.c: (on_window_destroy), (draw_spectrum),
(message_handler), (main):
port to use message to get results, cleanly exit when closing the window
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_get_property),
(gst_spectrum_set_caps), (gst_spectrum_start),
(gst_spectrum_message_new), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
port to derive from basetransform and send results via messages
(like level element)
2006-06-16 09:49:07 +00:00
|
|
|
GstSpectrum *filter = GST_SPECTRUM (object);
|
2001-12-22 23:26:33 +00:00
|
|
|
|
|
|
|
switch (prop_id) {
|
gst/spectrum/: port to use message to get results, cleanly exit when closing the window
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (on_window_destroy),
(draw_spectrum), (message_handler), (main):
* gst/spectrum/demo-osssrc.c: (on_window_destroy), (draw_spectrum),
(message_handler), (main):
port to use message to get results, cleanly exit when closing the window
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_get_property),
(gst_spectrum_set_caps), (gst_spectrum_start),
(gst_spectrum_message_new), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
port to derive from basetransform and send results via messages
(like level element)
2006-06-16 09:49:07 +00:00
|
|
|
case PROP_SIGNAL_SPECTRUM:
|
|
|
|
filter->message = g_value_get_boolean (value);
|
|
|
|
break;
|
Port GstSpectrum to GstAudioFilter and libgstfft, add support for int32, float and double, use floats for the message...
Original commit message from CVS:
* configure.ac:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-audiotest.c: (draw_spectrum),
(message_handler), (main):
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (message_handler):
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_start),
(gst_spectrum_setup), (gst_spectrum_message_new),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Port GstSpectrum to GstAudioFilter and libgstfft, add support
for int32, float and double, use floats for the message contents,
average all FFTs done in one interval for better results, use
a better windowing function, allow posting the phase in the message
and actually do an FFT with the requested number of bands instead
of interpolating.
* tests/check/elements/spectrum.c: (GST_START_TEST),
(spectrum_suite):
Improve the units tests by checking for a 11025Hz sine wave
and add unit tests for all 4 supported sample types.
2007-09-06 07:21:22 +00:00
|
|
|
case PROP_SIGNAL_MAGNITUDE:
|
|
|
|
filter->message_magnitude = g_value_get_boolean (value);
|
|
|
|
break;
|
|
|
|
case PROP_SIGNAL_PHASE:
|
|
|
|
filter->message_phase = g_value_get_boolean (value);
|
|
|
|
break;
|
gst/spectrum/: port to use message to get results, cleanly exit when closing the window
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (on_window_destroy),
(draw_spectrum), (message_handler), (main):
* gst/spectrum/demo-osssrc.c: (on_window_destroy), (draw_spectrum),
(message_handler), (main):
port to use message to get results, cleanly exit when closing the window
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_get_property),
(gst_spectrum_set_caps), (gst_spectrum_start),
(gst_spectrum_message_new), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
port to derive from basetransform and send results via messages
(like level element)
2006-06-16 09:49:07 +00:00
|
|
|
case PROP_SIGNAL_INTERVAL:
|
2006-09-11 18:23:59 +00:00
|
|
|
filter->interval = g_value_get_uint64 (value);
|
gst/spectrum/: port to use message to get results, cleanly exit when closing the window
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (on_window_destroy),
(draw_spectrum), (message_handler), (main):
* gst/spectrum/demo-osssrc.c: (on_window_destroy), (draw_spectrum),
(message_handler), (main):
port to use message to get results, cleanly exit when closing the window
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_get_property),
(gst_spectrum_set_caps), (gst_spectrum_start),
(gst_spectrum_message_new), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
port to derive from basetransform and send results via messages
(like level element)
2006-06-16 09:49:07 +00:00
|
|
|
break;
|
|
|
|
case PROP_BANDS:
|
configure.ac: Depend on gstreamer-0.10.12.1. gst/equalizer/gstiirequalizer.c (ARG_BAND_WIDTH, _do_init, ARG_GAIN, _Gs...
Original commit message from CVS:
* configure.ac:
Depend on gstreamer-0.10.12.1.
* gst/equalizer/gstiirequalizer.c (ARG_BAND_WIDTH, _do_init, ARG_GAIN,
_GstIirEqualizerBand, object, _GstIirEqualizerBandClass,
parent_class, gst_iir_equalizer_band_set_property,
gst_iir_equalizer_band_class_init, gst_iir_equalizer_band_get_type,
gst_iir_equalizer_child_proxy_get_child_by_index,
gst_iir_equalizer_child_proxy_get_children_count,
gst_iir_equalizer_child_proxy_interface_init, setup_filter,
gst_iir_equalizer_compute_frequencies,
gst_iir_equalizer_set_property, gst_iir_equalizer_get_property,
plugin_init):
* gst/equalizer/gstiirequalizer.h (audiofilter):
* gst/equalizer/gstiirequalizernbands.c (ARG_NUM_BANDS,
gst_iir_equalizer_nbands_base_init, gst_iir_equalizer_nbands_init,
gst_iir_equalizer_nbands_set_property):
Use new locking macros.
* gst/filter/gstbpwsinc.c (bpwsinc_set_caps):
Add fixme.
* gst/spectrum/gstspectrum.c (SPECTRUM_WINDOW_BASE,
SPECTRUM_WINDOW_LEN, gst_spectrum_init, gst_spectrum_set_property,
gst_spectrum_event, gst_spectrum_transform_ip):
Use new locking macros. Turn two fixed values into #defines.
2007-05-22 11:14:13 +00:00
|
|
|
GST_BASE_TRANSFORM_LOCK (filter);
|
Port GstSpectrum to GstAudioFilter and libgstfft, add support for int32, float and double, use floats for the message...
Original commit message from CVS:
* configure.ac:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-audiotest.c: (draw_spectrum),
(message_handler), (main):
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (message_handler):
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_start),
(gst_spectrum_setup), (gst_spectrum_message_new),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Port GstSpectrum to GstAudioFilter and libgstfft, add support
for int32, float and double, use floats for the message contents,
average all FFTs done in one interval for better results, use
a better windowing function, allow posting the phase in the message
and actually do an FFT with the requested number of bands instead
of interpolating.
* tests/check/elements/spectrum.c: (GST_START_TEST),
(spectrum_suite):
Improve the units tests by checking for a 11025Hz sine wave
and add unit tests for all 4 supported sample types.
2007-09-06 07:21:22 +00:00
|
|
|
|
gst/spectrum/: port to use message to get results, cleanly exit when closing the window
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (on_window_destroy),
(draw_spectrum), (message_handler), (main):
* gst/spectrum/demo-osssrc.c: (on_window_destroy), (draw_spectrum),
(message_handler), (main):
port to use message to get results, cleanly exit when closing the window
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_get_property),
(gst_spectrum_set_caps), (gst_spectrum_start),
(gst_spectrum_message_new), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
port to derive from basetransform and send results via messages
(like level element)
2006-06-16 09:49:07 +00:00
|
|
|
filter->bands = g_value_get_uint (value);
|
Port GstSpectrum to GstAudioFilter and libgstfft, add support for int32, float and double, use floats for the message...
Original commit message from CVS:
* configure.ac:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-audiotest.c: (draw_spectrum),
(message_handler), (main):
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (message_handler):
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_start),
(gst_spectrum_setup), (gst_spectrum_message_new),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Port GstSpectrum to GstAudioFilter and libgstfft, add support
for int32, float and double, use floats for the message contents,
average all FFTs done in one interval for better results, use
a better windowing function, allow posting the phase in the message
and actually do an FFT with the requested number of bands instead
of interpolating.
* tests/check/elements/spectrum.c: (GST_START_TEST),
(spectrum_suite):
Improve the units tests by checking for a 11025Hz sine wave
and add unit tests for all 4 supported sample types.
2007-09-06 07:21:22 +00:00
|
|
|
g_free (filter->spect_magnitude);
|
|
|
|
g_free (filter->spect_phase);
|
|
|
|
g_free (filter->in);
|
|
|
|
g_free (filter->freqdata);
|
|
|
|
|
|
|
|
if (filter->fft_free_func) {
|
|
|
|
filter->fft_free_func (filter->fft_ctx);
|
|
|
|
filter->fft_ctx = NULL;
|
|
|
|
filter->fft_free_func = NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
filter->in = NULL;
|
|
|
|
filter->freqdata = NULL;
|
|
|
|
filter->spect_magnitude = g_new0 (gfloat, filter->bands);
|
|
|
|
filter->spect_phase = g_new0 (gfloat, filter->bands);
|
|
|
|
filter->num_frames = 0;
|
|
|
|
filter->num_fft = 0;
|
configure.ac: Depend on gstreamer-0.10.12.1. gst/equalizer/gstiirequalizer.c (ARG_BAND_WIDTH, _do_init, ARG_GAIN, _Gs...
Original commit message from CVS:
* configure.ac:
Depend on gstreamer-0.10.12.1.
* gst/equalizer/gstiirequalizer.c (ARG_BAND_WIDTH, _do_init, ARG_GAIN,
_GstIirEqualizerBand, object, _GstIirEqualizerBandClass,
parent_class, gst_iir_equalizer_band_set_property,
gst_iir_equalizer_band_class_init, gst_iir_equalizer_band_get_type,
gst_iir_equalizer_child_proxy_get_child_by_index,
gst_iir_equalizer_child_proxy_get_children_count,
gst_iir_equalizer_child_proxy_interface_init, setup_filter,
gst_iir_equalizer_compute_frequencies,
gst_iir_equalizer_set_property, gst_iir_equalizer_get_property,
plugin_init):
* gst/equalizer/gstiirequalizer.h (audiofilter):
* gst/equalizer/gstiirequalizernbands.c (ARG_NUM_BANDS,
gst_iir_equalizer_nbands_base_init, gst_iir_equalizer_nbands_init,
gst_iir_equalizer_nbands_set_property):
Use new locking macros.
* gst/filter/gstbpwsinc.c (bpwsinc_set_caps):
Add fixme.
* gst/spectrum/gstspectrum.c (SPECTRUM_WINDOW_BASE,
SPECTRUM_WINDOW_LEN, gst_spectrum_init, gst_spectrum_set_property,
gst_spectrum_event, gst_spectrum_transform_ip):
Use new locking macros. Turn two fixed values into #defines.
2007-05-22 11:14:13 +00:00
|
|
|
GST_BASE_TRANSFORM_UNLOCK (filter);
|
gst/spectrum/: port to use message to get results, cleanly exit when closing the window
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (on_window_destroy),
(draw_spectrum), (message_handler), (main):
* gst/spectrum/demo-osssrc.c: (on_window_destroy), (draw_spectrum),
(message_handler), (main):
port to use message to get results, cleanly exit when closing the window
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_get_property),
(gst_spectrum_set_caps), (gst_spectrum_start),
(gst_spectrum_message_new), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
port to derive from basetransform and send results via messages
(like level element)
2006-06-16 09:49:07 +00:00
|
|
|
GST_DEBUG_OBJECT (filter, "reallocation, spect = %p, bands =%d ",
|
Port GstSpectrum to GstAudioFilter and libgstfft, add support for int32, float and double, use floats for the message...
Original commit message from CVS:
* configure.ac:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-audiotest.c: (draw_spectrum),
(message_handler), (main):
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (message_handler):
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_start),
(gst_spectrum_setup), (gst_spectrum_message_new),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Port GstSpectrum to GstAudioFilter and libgstfft, add support
for int32, float and double, use floats for the message contents,
average all FFTs done in one interval for better results, use
a better windowing function, allow posting the phase in the message
and actually do an FFT with the requested number of bands instead
of interpolating.
* tests/check/elements/spectrum.c: (GST_START_TEST),
(spectrum_suite):
Improve the units tests by checking for a 11025Hz sine wave
and add unit tests for all 4 supported sample types.
2007-09-06 07:21:22 +00:00
|
|
|
filter->spect_magnitude, filter->bands);
|
gst/spectrum/Makefile.am: Link to base libraries
Original commit message from CVS:
* gst/spectrum/Makefile.am:
Link to base libraries
* gst/spectrum/demo-osssrc.c: (main):
use new threshhold property
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_set_sink_caps),
(gst_spectrum_get_sink_caps), (gst_spectrum_chain),
(gst_spectrum_change_state):
* gst/spectrum/gstspectrum.h:
Use gst_adapter, support multiple-channels, add threshold property for
result, add docs, fix resulting spectrum range (was including mirrored
results)
2006-05-21 16:23:23 +00:00
|
|
|
break;
|
gst/spectrum/: port to use message to get results, cleanly exit when closing the window
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (on_window_destroy),
(draw_spectrum), (message_handler), (main):
* gst/spectrum/demo-osssrc.c: (on_window_destroy), (draw_spectrum),
(message_handler), (main):
port to use message to get results, cleanly exit when closing the window
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_get_property),
(gst_spectrum_set_caps), (gst_spectrum_start),
(gst_spectrum_message_new), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
port to derive from basetransform and send results via messages
(like level element)
2006-06-16 09:49:07 +00:00
|
|
|
case PROP_THRESHOLD:
|
|
|
|
filter->threshold = g_value_get_int (value);
|
2001-12-22 23:26:33 +00:00
|
|
|
break;
|
|
|
|
default:
|
2006-05-20 22:42:15 +00:00
|
|
|
G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec);
|
2001-12-22 23:26:33 +00:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
gst/spectrum/: port to use message to get results, cleanly exit when closing the window
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (on_window_destroy),
(draw_spectrum), (message_handler), (main):
* gst/spectrum/demo-osssrc.c: (on_window_destroy), (draw_spectrum),
(message_handler), (main):
port to use message to get results, cleanly exit when closing the window
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_get_property),
(gst_spectrum_set_caps), (gst_spectrum_start),
(gst_spectrum_message_new), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
port to derive from basetransform and send results via messages
(like level element)
2006-06-16 09:49:07 +00:00
|
|
|
static void
|
|
|
|
gst_spectrum_get_property (GObject * object, guint prop_id,
|
|
|
|
GValue * value, GParamSpec * pspec)
|
|
|
|
{
|
|
|
|
GstSpectrum *filter = GST_SPECTRUM (object);
|
|
|
|
|
|
|
|
switch (prop_id) {
|
|
|
|
case PROP_SIGNAL_SPECTRUM:
|
|
|
|
g_value_set_boolean (value, filter->message);
|
|
|
|
break;
|
Port GstSpectrum to GstAudioFilter and libgstfft, add support for int32, float and double, use floats for the message...
Original commit message from CVS:
* configure.ac:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-audiotest.c: (draw_spectrum),
(message_handler), (main):
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (message_handler):
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_start),
(gst_spectrum_setup), (gst_spectrum_message_new),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Port GstSpectrum to GstAudioFilter and libgstfft, add support
for int32, float and double, use floats for the message contents,
average all FFTs done in one interval for better results, use
a better windowing function, allow posting the phase in the message
and actually do an FFT with the requested number of bands instead
of interpolating.
* tests/check/elements/spectrum.c: (GST_START_TEST),
(spectrum_suite):
Improve the units tests by checking for a 11025Hz sine wave
and add unit tests for all 4 supported sample types.
2007-09-06 07:21:22 +00:00
|
|
|
case PROP_SIGNAL_MAGNITUDE:
|
|
|
|
g_value_set_boolean (value, filter->message_magnitude);
|
|
|
|
break;
|
|
|
|
case PROP_SIGNAL_PHASE:
|
|
|
|
g_value_set_boolean (value, filter->message_phase);
|
|
|
|
break;
|
gst/spectrum/: port to use message to get results, cleanly exit when closing the window
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (on_window_destroy),
(draw_spectrum), (message_handler), (main):
* gst/spectrum/demo-osssrc.c: (on_window_destroy), (draw_spectrum),
(message_handler), (main):
port to use message to get results, cleanly exit when closing the window
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_get_property),
(gst_spectrum_set_caps), (gst_spectrum_start),
(gst_spectrum_message_new), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
port to derive from basetransform and send results via messages
(like level element)
2006-06-16 09:49:07 +00:00
|
|
|
case PROP_SIGNAL_INTERVAL:
|
|
|
|
g_value_set_uint64 (value, filter->interval);
|
|
|
|
break;
|
|
|
|
case PROP_BANDS:
|
|
|
|
g_value_set_uint (value, filter->bands);
|
|
|
|
break;
|
|
|
|
case PROP_THRESHOLD:
|
|
|
|
g_value_set_int (value, filter->threshold);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static gboolean
|
|
|
|
gst_spectrum_start (GstBaseTransform * trans)
|
|
|
|
{
|
|
|
|
GstSpectrum *filter = GST_SPECTRUM (trans);
|
|
|
|
|
|
|
|
filter->num_frames = 0;
|
Port GstSpectrum to GstAudioFilter and libgstfft, add support for int32, float and double, use floats for the message...
Original commit message from CVS:
* configure.ac:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-audiotest.c: (draw_spectrum),
(message_handler), (main):
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (message_handler):
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_start),
(gst_spectrum_setup), (gst_spectrum_message_new),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Port GstSpectrum to GstAudioFilter and libgstfft, add support
for int32, float and double, use floats for the message contents,
average all FFTs done in one interval for better results, use
a better windowing function, allow posting the phase in the message
and actually do an FFT with the requested number of bands instead
of interpolating.
* tests/check/elements/spectrum.c: (GST_START_TEST),
(spectrum_suite):
Improve the units tests by checking for a 11025Hz sine wave
and add unit tests for all 4 supported sample types.
2007-09-06 07:21:22 +00:00
|
|
|
filter->num_fft = 0;
|
|
|
|
if (filter->spect_magnitude)
|
|
|
|
memset (filter->spect_magnitude, filter->bands * sizeof (gfloat), 0);
|
|
|
|
if (filter->spect_phase)
|
|
|
|
memset (filter->spect_phase, filter->bands * sizeof (gfloat), 0);
|
2007-03-07 11:23:20 +00:00
|
|
|
gst_segment_init (&filter->segment, GST_FORMAT_UNDEFINED);
|
gst/spectrum/: port to use message to get results, cleanly exit when closing the window
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (on_window_destroy),
(draw_spectrum), (message_handler), (main):
* gst/spectrum/demo-osssrc.c: (on_window_destroy), (draw_spectrum),
(message_handler), (main):
port to use message to get results, cleanly exit when closing the window
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_get_property),
(gst_spectrum_set_caps), (gst_spectrum_start),
(gst_spectrum_message_new), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
port to derive from basetransform and send results via messages
(like level element)
2006-06-16 09:49:07 +00:00
|
|
|
|
|
|
|
return TRUE;
|
|
|
|
}
|
|
|
|
|
2006-09-12 20:18:55 +00:00
|
|
|
static gboolean
|
|
|
|
gst_spectrum_stop (GstBaseTransform * trans)
|
|
|
|
{
|
|
|
|
GstSpectrum *filter = GST_SPECTRUM (trans);
|
|
|
|
|
|
|
|
gst_adapter_clear (filter->adapter);
|
|
|
|
|
|
|
|
return TRUE;
|
|
|
|
}
|
|
|
|
|
|
|
|
static gboolean
|
|
|
|
gst_spectrum_event (GstBaseTransform * trans, GstEvent * event)
|
|
|
|
{
|
|
|
|
GstSpectrum *filter = GST_SPECTRUM (trans);
|
|
|
|
|
|
|
|
switch (GST_EVENT_TYPE (event)) {
|
|
|
|
case GST_EVENT_FLUSH_STOP:
|
|
|
|
case GST_EVENT_EOS:
|
|
|
|
gst_adapter_clear (filter->adapter);
|
|
|
|
break;
|
2007-03-07 11:23:20 +00:00
|
|
|
case GST_EVENT_NEWSEGMENT:{
|
|
|
|
GstFormat format;
|
|
|
|
gdouble rate, arate;
|
|
|
|
gint64 start, stop, time;
|
|
|
|
gboolean update;
|
|
|
|
|
|
|
|
/* the newsegment values are used to clip the input samples
|
|
|
|
* and to convert the incomming timestamps to running time */
|
|
|
|
gst_event_parse_new_segment_full (event, &update, &rate, &arate, &format,
|
|
|
|
&start, &stop, &time);
|
|
|
|
|
|
|
|
/* now configure the values */
|
|
|
|
gst_segment_set_newsegment_full (&filter->segment, update,
|
|
|
|
rate, arate, format, start, stop, time);
|
|
|
|
break;
|
|
|
|
}
|
2006-09-12 20:18:55 +00:00
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
return TRUE;
|
|
|
|
}
|
|
|
|
|
Port GstSpectrum to GstAudioFilter and libgstfft, add support for int32, float and double, use floats for the message...
Original commit message from CVS:
* configure.ac:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-audiotest.c: (draw_spectrum),
(message_handler), (main):
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (message_handler):
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_start),
(gst_spectrum_setup), (gst_spectrum_message_new),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Port GstSpectrum to GstAudioFilter and libgstfft, add support
for int32, float and double, use floats for the message contents,
average all FFTs done in one interval for better results, use
a better windowing function, allow posting the phase in the message
and actually do an FFT with the requested number of bands instead
of interpolating.
* tests/check/elements/spectrum.c: (GST_START_TEST),
(spectrum_suite):
Improve the units tests by checking for a 11025Hz sine wave
and add unit tests for all 4 supported sample types.
2007-09-06 07:21:22 +00:00
|
|
|
static gboolean
|
|
|
|
gst_spectrum_setup (GstAudioFilter * base, GstRingBufferSpec * format)
|
|
|
|
{
|
|
|
|
GstSpectrum *filter = GST_SPECTRUM (base);
|
|
|
|
|
|
|
|
if (filter->in) {
|
|
|
|
g_free (filter->in);
|
|
|
|
filter->in = NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (filter->fft_free_func) {
|
|
|
|
filter->fft_free_func (filter->fft_ctx);
|
|
|
|
filter->fft_ctx = NULL;
|
|
|
|
filter->fft_free_func = NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (filter->freqdata) {
|
|
|
|
g_free (filter->freqdata);
|
|
|
|
filter->freqdata = NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (format->type == GST_BUFTYPE_LINEAR && format->width == 32)
|
|
|
|
filter->process = (GstSpectrumProcessFunc) process_s32;
|
|
|
|
else if (format->type == GST_BUFTYPE_LINEAR && format->width == 16)
|
|
|
|
filter->process = (GstSpectrumProcessFunc) process_s16;
|
|
|
|
else if (format->type == GST_BUFTYPE_FLOAT && format->width == 64)
|
|
|
|
filter->process = (GstSpectrumProcessFunc) process_f64;
|
|
|
|
else if (format->type == GST_BUFTYPE_FLOAT && format->width == 32)
|
|
|
|
filter->process = (GstSpectrumProcessFunc) process_f32;
|
|
|
|
else
|
|
|
|
g_assert_not_reached ();
|
|
|
|
|
|
|
|
return TRUE;
|
|
|
|
}
|
|
|
|
|
gst/spectrum/: port to use message to get results, cleanly exit when closing the window
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (on_window_destroy),
(draw_spectrum), (message_handler), (main):
* gst/spectrum/demo-osssrc.c: (on_window_destroy), (draw_spectrum),
(message_handler), (main):
port to use message to get results, cleanly exit when closing the window
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_get_property),
(gst_spectrum_set_caps), (gst_spectrum_start),
(gst_spectrum_message_new), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
port to derive from basetransform and send results via messages
(like level element)
2006-06-16 09:49:07 +00:00
|
|
|
static GstMessage *
|
|
|
|
gst_spectrum_message_new (GstSpectrum * spectrum, GstClockTime endtime)
|
|
|
|
{
|
|
|
|
GstStructure *s;
|
|
|
|
GValue v = { 0, };
|
|
|
|
GValue *l;
|
|
|
|
guint i;
|
Port GstSpectrum to GstAudioFilter and libgstfft, add support for int32, float and double, use floats for the message...
Original commit message from CVS:
* configure.ac:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-audiotest.c: (draw_spectrum),
(message_handler), (main):
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (message_handler):
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_start),
(gst_spectrum_setup), (gst_spectrum_message_new),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Port GstSpectrum to GstAudioFilter and libgstfft, add support
for int32, float and double, use floats for the message contents,
average all FFTs done in one interval for better results, use
a better windowing function, allow posting the phase in the message
and actually do an FFT with the requested number of bands instead
of interpolating.
* tests/check/elements/spectrum.c: (GST_START_TEST),
(spectrum_suite):
Improve the units tests by checking for a 11025Hz sine wave
and add unit tests for all 4 supported sample types.
2007-09-06 07:21:22 +00:00
|
|
|
gfloat *spect_magnitude = spectrum->spect_magnitude;
|
|
|
|
gfloat *spect_phase = spectrum->spect_phase;
|
gst/spectrum/: port to use message to get results, cleanly exit when closing the window
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (on_window_destroy),
(draw_spectrum), (message_handler), (main):
* gst/spectrum/demo-osssrc.c: (on_window_destroy), (draw_spectrum),
(message_handler), (main):
port to use message to get results, cleanly exit when closing the window
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_get_property),
(gst_spectrum_set_caps), (gst_spectrum_start),
(gst_spectrum_message_new), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
port to derive from basetransform and send results via messages
(like level element)
2006-06-16 09:49:07 +00:00
|
|
|
|
|
|
|
GST_DEBUG_OBJECT (spectrum, "preparing message, spect = %p, bands =%d ",
|
Port GstSpectrum to GstAudioFilter and libgstfft, add support for int32, float and double, use floats for the message...
Original commit message from CVS:
* configure.ac:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-audiotest.c: (draw_spectrum),
(message_handler), (main):
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (message_handler):
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_start),
(gst_spectrum_setup), (gst_spectrum_message_new),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Port GstSpectrum to GstAudioFilter and libgstfft, add support
for int32, float and double, use floats for the message contents,
average all FFTs done in one interval for better results, use
a better windowing function, allow posting the phase in the message
and actually do an FFT with the requested number of bands instead
of interpolating.
* tests/check/elements/spectrum.c: (GST_START_TEST),
(spectrum_suite):
Improve the units tests by checking for a 11025Hz sine wave
and add unit tests for all 4 supported sample types.
2007-09-06 07:21:22 +00:00
|
|
|
spect_magnitude, spectrum->bands);
|
gst/spectrum/: port to use message to get results, cleanly exit when closing the window
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (on_window_destroy),
(draw_spectrum), (message_handler), (main):
* gst/spectrum/demo-osssrc.c: (on_window_destroy), (draw_spectrum),
(message_handler), (main):
port to use message to get results, cleanly exit when closing the window
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_get_property),
(gst_spectrum_set_caps), (gst_spectrum_start),
(gst_spectrum_message_new), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
port to derive from basetransform and send results via messages
(like level element)
2006-06-16 09:49:07 +00:00
|
|
|
|
|
|
|
s = gst_structure_new ("spectrum", "endtime", GST_TYPE_CLOCK_TIME,
|
|
|
|
endtime, NULL);
|
|
|
|
|
Port GstSpectrum to GstAudioFilter and libgstfft, add support for int32, float and double, use floats for the message...
Original commit message from CVS:
* configure.ac:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-audiotest.c: (draw_spectrum),
(message_handler), (main):
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (message_handler):
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_start),
(gst_spectrum_setup), (gst_spectrum_message_new),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Port GstSpectrum to GstAudioFilter and libgstfft, add support
for int32, float and double, use floats for the message contents,
average all FFTs done in one interval for better results, use
a better windowing function, allow posting the phase in the message
and actually do an FFT with the requested number of bands instead
of interpolating.
* tests/check/elements/spectrum.c: (GST_START_TEST),
(spectrum_suite):
Improve the units tests by checking for a 11025Hz sine wave
and add unit tests for all 4 supported sample types.
2007-09-06 07:21:22 +00:00
|
|
|
if (spectrum->message_magnitude) {
|
|
|
|
g_value_init (&v, GST_TYPE_LIST);
|
|
|
|
/* will copy-by-value */
|
|
|
|
gst_structure_set_value (s, "magnitude", &v);
|
|
|
|
g_value_unset (&v);
|
|
|
|
|
|
|
|
g_value_init (&v, G_TYPE_FLOAT);
|
|
|
|
l = (GValue *) gst_structure_get_value (s, "magnitude");
|
|
|
|
for (i = 0; i < spectrum->bands; i++) {
|
|
|
|
g_value_set_float (&v, spect_magnitude[i]);
|
|
|
|
gst_value_list_append_value (l, &v); /* copies by value */
|
|
|
|
}
|
|
|
|
g_value_unset (&v);
|
|
|
|
}
|
gst/spectrum/: port to use message to get results, cleanly exit when closing the window
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (on_window_destroy),
(draw_spectrum), (message_handler), (main):
* gst/spectrum/demo-osssrc.c: (on_window_destroy), (draw_spectrum),
(message_handler), (main):
port to use message to get results, cleanly exit when closing the window
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_get_property),
(gst_spectrum_set_caps), (gst_spectrum_start),
(gst_spectrum_message_new), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
port to derive from basetransform and send results via messages
(like level element)
2006-06-16 09:49:07 +00:00
|
|
|
|
Port GstSpectrum to GstAudioFilter and libgstfft, add support for int32, float and double, use floats for the message...
Original commit message from CVS:
* configure.ac:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-audiotest.c: (draw_spectrum),
(message_handler), (main):
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (message_handler):
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_start),
(gst_spectrum_setup), (gst_spectrum_message_new),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Port GstSpectrum to GstAudioFilter and libgstfft, add support
for int32, float and double, use floats for the message contents,
average all FFTs done in one interval for better results, use
a better windowing function, allow posting the phase in the message
and actually do an FFT with the requested number of bands instead
of interpolating.
* tests/check/elements/spectrum.c: (GST_START_TEST),
(spectrum_suite):
Improve the units tests by checking for a 11025Hz sine wave
and add unit tests for all 4 supported sample types.
2007-09-06 07:21:22 +00:00
|
|
|
if (spectrum->message_phase) {
|
|
|
|
g_value_init (&v, GST_TYPE_LIST);
|
|
|
|
/* will copy-by-value */
|
|
|
|
gst_structure_set_value (s, "phase", &v);
|
|
|
|
g_value_unset (&v);
|
|
|
|
|
|
|
|
g_value_init (&v, G_TYPE_FLOAT);
|
|
|
|
l = (GValue *) gst_structure_get_value (s, "phase");
|
|
|
|
for (i = 0; i < spectrum->bands; i++) {
|
|
|
|
g_value_set_float (&v, spect_phase[i]);
|
|
|
|
gst_value_list_append_value (l, &v); /* copies by value */
|
|
|
|
}
|
|
|
|
g_value_unset (&v);
|
gst/spectrum/: port to use message to get results, cleanly exit when closing the window
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (on_window_destroy),
(draw_spectrum), (message_handler), (main):
* gst/spectrum/demo-osssrc.c: (on_window_destroy), (draw_spectrum),
(message_handler), (main):
port to use message to get results, cleanly exit when closing the window
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_get_property),
(gst_spectrum_set_caps), (gst_spectrum_start),
(gst_spectrum_message_new), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
port to derive from basetransform and send results via messages
(like level element)
2006-06-16 09:49:07 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
return gst_message_new_element (GST_OBJECT (spectrum), s);
|
|
|
|
}
|
gst/spectrum/Makefile.am: Link to base libraries
Original commit message from CVS:
* gst/spectrum/Makefile.am:
Link to base libraries
* gst/spectrum/demo-osssrc.c: (main):
use new threshhold property
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_set_sink_caps),
(gst_spectrum_get_sink_caps), (gst_spectrum_chain),
(gst_spectrum_change_state):
* gst/spectrum/gstspectrum.h:
Use gst_adapter, support multiple-channels, add threshold property for
result, add docs, fix resulting spectrum range (was including mirrored
results)
2006-05-21 16:23:23 +00:00
|
|
|
|
Port GstSpectrum to GstAudioFilter and libgstfft, add support for int32, float and double, use floats for the message...
Original commit message from CVS:
* configure.ac:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-audiotest.c: (draw_spectrum),
(message_handler), (main):
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (message_handler):
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_start),
(gst_spectrum_setup), (gst_spectrum_message_new),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Port GstSpectrum to GstAudioFilter and libgstfft, add support
for int32, float and double, use floats for the message contents,
average all FFTs done in one interval for better results, use
a better windowing function, allow posting the phase in the message
and actually do an FFT with the requested number of bands instead
of interpolating.
* tests/check/elements/spectrum.c: (GST_START_TEST),
(spectrum_suite):
Improve the units tests by checking for a 11025Hz sine wave
and add unit tests for all 4 supported sample types.
2007-09-06 07:21:22 +00:00
|
|
|
#define DEFINE_PROCESS_FUNC_INT(width,next_width,max) \
|
|
|
|
static void \
|
|
|
|
process_s##width (GstSpectrum *spectrum, const gint##width *samples) \
|
|
|
|
{ \
|
|
|
|
gfloat *spect_magnitude = spectrum->spect_magnitude; \
|
|
|
|
gfloat *spect_phase = spectrum->spect_phase; \
|
|
|
|
gint channels = GST_AUDIO_FILTER (spectrum)->format.channels; \
|
|
|
|
gint i, j, k; \
|
|
|
|
gint##next_width acc; \
|
|
|
|
GstFFTS##width##Complex *freqdata; \
|
|
|
|
GstFFTS##width *ctx; \
|
|
|
|
gint##width *in; \
|
|
|
|
gint nfft = 2 * spectrum->bands - 2; \
|
|
|
|
\
|
|
|
|
if (!spectrum->in) \
|
|
|
|
spectrum->in = (guint8 *) g_new (gint##width, nfft); \
|
|
|
|
\
|
|
|
|
in = (gint##width *) spectrum->in; \
|
|
|
|
\
|
|
|
|
for (i = 0, j = 0; i < nfft; i++) { \
|
|
|
|
/* convert to mono */ \
|
|
|
|
for (k = 0, acc = 0; k < channels; k++) \
|
|
|
|
acc += samples[j++]; \
|
|
|
|
in[i] = (gint##width) (acc / channels); \
|
|
|
|
} \
|
|
|
|
\
|
|
|
|
if (!spectrum->fft_ctx) { \
|
|
|
|
spectrum->fft_ctx = gst_fft_s##width##_new (nfft, FALSE); \
|
|
|
|
spectrum->fft_free_func = (GstSpectrumFFTFreeFunc) gst_fft_s##width##_free; \
|
|
|
|
} \
|
|
|
|
ctx = spectrum->fft_ctx; \
|
|
|
|
\
|
|
|
|
gst_fft_s##width##_window (ctx, in, GST_FFT_WINDOW_HAMMING); \
|
|
|
|
\
|
|
|
|
if (!spectrum->freqdata) \
|
|
|
|
spectrum->freqdata = g_new (GstFFTS##width##Complex, spectrum->bands); \
|
|
|
|
\
|
|
|
|
freqdata = (GstFFTS##width##Complex *) spectrum->freqdata; \
|
|
|
|
\
|
|
|
|
gst_fft_s##width##_fft (ctx, in, freqdata); \
|
|
|
|
spectrum->num_fft++; \
|
|
|
|
\
|
|
|
|
/* Calculate magnitude in db */ \
|
|
|
|
for (i = 0; i < spectrum->bands; i++) { \
|
|
|
|
gdouble val = (gdouble) freqdata[i].r * (gdouble) freqdata[i].r \
|
|
|
|
+ (gdouble) freqdata[i].i * (gdouble) freqdata[i].i; \
|
|
|
|
val = sqrt (val); \
|
|
|
|
val = 20.0 * log10 (val / max); \
|
|
|
|
if (val > spectrum->threshold) \
|
|
|
|
val -= spectrum->threshold; \
|
|
|
|
else \
|
|
|
|
val = 0.0; \
|
|
|
|
spect_magnitude[i] += val; \
|
|
|
|
} \
|
|
|
|
\
|
|
|
|
/* Calculate phase */ \
|
|
|
|
for (i = 0; i < spectrum->bands; i++) \
|
|
|
|
spect_phase[i] += atan2 (freqdata[i].i, freqdata[i].r); \
|
|
|
|
\
|
|
|
|
}
|
|
|
|
|
|
|
|
DEFINE_PROCESS_FUNC_INT (16, 32, 32767.0);
|
|
|
|
DEFINE_PROCESS_FUNC_INT (32, 64, 2147483647.0);
|
|
|
|
|
|
|
|
#define DEFINE_PROCESS_FUNC_FLOAT(width,type) \
|
|
|
|
static void \
|
|
|
|
process_f##width (GstSpectrum *spectrum, const g##type *samples) \
|
|
|
|
{ \
|
|
|
|
gfloat *spect_magnitude = spectrum->spect_magnitude; \
|
|
|
|
gfloat *spect_phase = spectrum->spect_phase; \
|
|
|
|
gint channels = GST_AUDIO_FILTER (spectrum)->format.channels; \
|
|
|
|
gint i, j, k; \
|
|
|
|
g##type acc; \
|
|
|
|
GstFFTF##width##Complex *freqdata; \
|
|
|
|
GstFFTF##width *ctx; \
|
|
|
|
g##type *in; \
|
|
|
|
gint nfft = 2 * spectrum->bands - 2; \
|
|
|
|
\
|
|
|
|
if (!spectrum->in) \
|
|
|
|
spectrum->in = (guint8 *) g_new (g##type, nfft); \
|
|
|
|
\
|
|
|
|
in = (g##type *) spectrum->in; \
|
|
|
|
\
|
|
|
|
for (i = 0, j = 0; i < nfft; i++) { \
|
|
|
|
/* convert to mono */ \
|
|
|
|
for (k = 0, acc = 0; k < channels; k++) \
|
|
|
|
acc += samples[j++]; \
|
|
|
|
in[i] = (g##type) (acc / channels); \
|
|
|
|
if (abs (in[i]) > 1.0) \
|
|
|
|
g_assert_not_reached(); \
|
|
|
|
} \
|
|
|
|
\
|
|
|
|
if (!spectrum->fft_ctx) { \
|
|
|
|
spectrum->fft_ctx = gst_fft_f##width##_new (nfft, FALSE); \
|
|
|
|
spectrum->fft_free_func = (GstSpectrumFFTFreeFunc) gst_fft_f##width##_free; \
|
|
|
|
} \
|
|
|
|
ctx = spectrum->fft_ctx; \
|
|
|
|
\
|
|
|
|
gst_fft_f##width##_window (ctx, in, GST_FFT_WINDOW_HAMMING); \
|
|
|
|
\
|
|
|
|
if (!spectrum->freqdata) \
|
|
|
|
spectrum->freqdata = g_new (GstFFTF##width##Complex, spectrum->bands); \
|
|
|
|
\
|
|
|
|
freqdata = (GstFFTF##width##Complex *) spectrum->freqdata; \
|
|
|
|
\
|
|
|
|
gst_fft_f##width##_fft (ctx, in, freqdata); \
|
|
|
|
spectrum->num_fft++; \
|
|
|
|
\
|
|
|
|
/* Calculate magnitude in db */ \
|
|
|
|
for (i = 0; i < spectrum->bands; i++) { \
|
|
|
|
gdouble val = freqdata[i].r * freqdata[i].r + freqdata[i].i * freqdata[i].i; \
|
|
|
|
val = sqrt (val); \
|
|
|
|
val = 20.0 * log10 (val / nfft); \
|
|
|
|
if (val > spectrum->threshold) \
|
|
|
|
val -= spectrum->threshold; \
|
|
|
|
else \
|
|
|
|
val = 0.0; \
|
|
|
|
spect_magnitude[i] += val; \
|
|
|
|
} \
|
|
|
|
\
|
|
|
|
/* Calculate phase */ \
|
|
|
|
for (i = 0; i < spectrum->bands; i++) \
|
|
|
|
spect_phase[i] += atan2 (freqdata[i].i, freqdata[i].r); \
|
|
|
|
\
|
|
|
|
}
|
|
|
|
|
|
|
|
DEFINE_PROCESS_FUNC_FLOAT (32, float);
|
|
|
|
DEFINE_PROCESS_FUNC_FLOAT (64, double);
|
|
|
|
|
2006-05-20 22:42:15 +00:00
|
|
|
static GstFlowReturn
|
gst/spectrum/: port to use message to get results, cleanly exit when closing the window
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (on_window_destroy),
(draw_spectrum), (message_handler), (main):
* gst/spectrum/demo-osssrc.c: (on_window_destroy), (draw_spectrum),
(message_handler), (main):
port to use message to get results, cleanly exit when closing the window
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_get_property),
(gst_spectrum_set_caps), (gst_spectrum_start),
(gst_spectrum_message_new), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
port to derive from basetransform and send results via messages
(like level element)
2006-06-16 09:49:07 +00:00
|
|
|
gst_spectrum_transform_ip (GstBaseTransform * trans, GstBuffer * in)
|
2001-12-22 23:26:33 +00:00
|
|
|
{
|
gst/spectrum/: port to use message to get results, cleanly exit when closing the window
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (on_window_destroy),
(draw_spectrum), (message_handler), (main):
* gst/spectrum/demo-osssrc.c: (on_window_destroy), (draw_spectrum),
(message_handler), (main):
port to use message to get results, cleanly exit when closing the window
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_get_property),
(gst_spectrum_set_caps), (gst_spectrum_start),
(gst_spectrum_message_new), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
port to derive from basetransform and send results via messages
(like level element)
2006-06-16 09:49:07 +00:00
|
|
|
GstSpectrum *spectrum = GST_SPECTRUM (trans);
|
gst/spectrum/Makefile.am: Link to base libraries
Original commit message from CVS:
* gst/spectrum/Makefile.am:
Link to base libraries
* gst/spectrum/demo-osssrc.c: (main):
use new threshhold property
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_set_sink_caps),
(gst_spectrum_get_sink_caps), (gst_spectrum_chain),
(gst_spectrum_change_state):
* gst/spectrum/gstspectrum.h:
Use gst_adapter, support multiple-channels, add threshold property for
result, add docs, fix resulting spectrum range (was including mirrored
results)
2006-05-21 16:23:23 +00:00
|
|
|
gint wanted;
|
Port GstSpectrum to GstAudioFilter and libgstfft, add support for int32, float and double, use floats for the message...
Original commit message from CVS:
* configure.ac:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-audiotest.c: (draw_spectrum),
(message_handler), (main):
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (message_handler):
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_start),
(gst_spectrum_setup), (gst_spectrum_message_new),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Port GstSpectrum to GstAudioFilter and libgstfft, add support
for int32, float and double, use floats for the message contents,
average all FFTs done in one interval for better results, use
a better windowing function, allow posting the phase in the message
and actually do an FFT with the requested number of bands instead
of interpolating.
* tests/check/elements/spectrum.c: (GST_START_TEST),
(spectrum_suite):
Improve the units tests by checking for a 11025Hz sine wave
and add unit tests for all 4 supported sample types.
2007-09-06 07:21:22 +00:00
|
|
|
gint i;
|
|
|
|
gfloat *spect_magnitude = spectrum->spect_magnitude;
|
|
|
|
gfloat *spect_phase = spectrum->spect_phase;
|
|
|
|
gint rate = GST_AUDIO_FILTER (spectrum)->format.rate;
|
|
|
|
gint channels = GST_AUDIO_FILTER (spectrum)->format.channels;
|
|
|
|
gint width = GST_AUDIO_FILTER (spectrum)->format.width / 8;
|
|
|
|
gint nfft = 2 * spectrum->bands - 2;
|
2007-03-06 13:57:55 +00:00
|
|
|
|
2007-03-07 11:23:20 +00:00
|
|
|
GstClockTime endtime =
|
|
|
|
gst_segment_to_running_time (&spectrum->segment, GST_FORMAT_TIME,
|
|
|
|
GST_BUFFER_TIMESTAMP (in));
|
Port GstSpectrum to GstAudioFilter and libgstfft, add support for int32, float and double, use floats for the message...
Original commit message from CVS:
* configure.ac:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-audiotest.c: (draw_spectrum),
(message_handler), (main):
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (message_handler):
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_start),
(gst_spectrum_setup), (gst_spectrum_message_new),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Port GstSpectrum to GstAudioFilter and libgstfft, add support
for int32, float and double, use floats for the message contents,
average all FFTs done in one interval for better results, use
a better windowing function, allow posting the phase in the message
and actually do an FFT with the requested number of bands instead
of interpolating.
* tests/check/elements/spectrum.c: (GST_START_TEST),
(spectrum_suite):
Improve the units tests by checking for a 11025Hz sine wave
and add unit tests for all 4 supported sample types.
2007-09-06 07:21:22 +00:00
|
|
|
GstClockTime blktime = GST_FRAMES_TO_CLOCK_TIME (nfft, rate);
|
gst/spectrum/: port to use message to get results, cleanly exit when closing the window
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (on_window_destroy),
(draw_spectrum), (message_handler), (main):
* gst/spectrum/demo-osssrc.c: (on_window_destroy), (draw_spectrum),
(message_handler), (main):
port to use message to get results, cleanly exit when closing the window
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_get_property),
(gst_spectrum_set_caps), (gst_spectrum_start),
(gst_spectrum_message_new), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
port to derive from basetransform and send results via messages
(like level element)
2006-06-16 09:49:07 +00:00
|
|
|
|
2006-10-06 02:29:35 +00:00
|
|
|
GST_LOG_OBJECT (spectrum, "input size: %d bytes", GST_BUFFER_SIZE (in));
|
gst/spectrum/Makefile.am: Link to base libraries
Original commit message from CVS:
* gst/spectrum/Makefile.am:
Link to base libraries
* gst/spectrum/demo-osssrc.c: (main):
use new threshhold property
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_set_sink_caps),
(gst_spectrum_get_sink_caps), (gst_spectrum_chain),
(gst_spectrum_change_state):
* gst/spectrum/gstspectrum.h:
Use gst_adapter, support multiple-channels, add threshold property for
result, add docs, fix resulting spectrum range (was including mirrored
results)
2006-05-21 16:23:23 +00:00
|
|
|
|
2007-06-20 08:56:17 +00:00
|
|
|
/* can we do this nicer? */
|
|
|
|
gst_adapter_push (spectrum->adapter, gst_buffer_copy (in));
|
gst/spectrum/Makefile.am: Link to base libraries
Original commit message from CVS:
* gst/spectrum/Makefile.am:
Link to base libraries
* gst/spectrum/demo-osssrc.c: (main):
use new threshhold property
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_set_sink_caps),
(gst_spectrum_get_sink_caps), (gst_spectrum_chain),
(gst_spectrum_change_state):
* gst/spectrum/gstspectrum.h:
Use gst_adapter, support multiple-channels, add threshold property for
result, add docs, fix resulting spectrum range (was including mirrored
results)
2006-05-21 16:23:23 +00:00
|
|
|
/* required number of bytes */
|
Port GstSpectrum to GstAudioFilter and libgstfft, add support for int32, float and double, use floats for the message...
Original commit message from CVS:
* configure.ac:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-audiotest.c: (draw_spectrum),
(message_handler), (main):
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (message_handler):
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_start),
(gst_spectrum_setup), (gst_spectrum_message_new),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Port GstSpectrum to GstAudioFilter and libgstfft, add support
for int32, float and double, use floats for the message contents,
average all FFTs done in one interval for better results, use
a better windowing function, allow posting the phase in the message
and actually do an FFT with the requested number of bands instead
of interpolating.
* tests/check/elements/spectrum.c: (GST_START_TEST),
(spectrum_suite):
Improve the units tests by checking for a 11025Hz sine wave
and add unit tests for all 4 supported sample types.
2007-09-06 07:21:22 +00:00
|
|
|
wanted = channels * nfft * width;
|
gst/spectrum/Makefile.am: Link to base libraries
Original commit message from CVS:
* gst/spectrum/Makefile.am:
Link to base libraries
* gst/spectrum/demo-osssrc.c: (main):
use new threshhold property
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_set_sink_caps),
(gst_spectrum_get_sink_caps), (gst_spectrum_chain),
(gst_spectrum_change_state):
* gst/spectrum/gstspectrum.h:
Use gst_adapter, support multiple-channels, add threshold property for
result, add docs, fix resulting spectrum range (was including mirrored
results)
2006-05-21 16:23:23 +00:00
|
|
|
|
2006-10-06 11:31:11 +00:00
|
|
|
while (gst_adapter_available (spectrum->adapter) >= wanted) {
|
Port GstSpectrum to GstAudioFilter and libgstfft, add support for int32, float and double, use floats for the message...
Original commit message from CVS:
* configure.ac:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-audiotest.c: (draw_spectrum),
(message_handler), (main):
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (message_handler):
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_start),
(gst_spectrum_setup), (gst_spectrum_message_new),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Port GstSpectrum to GstAudioFilter and libgstfft, add support
for int32, float and double, use floats for the message contents,
average all FFTs done in one interval for better results, use
a better windowing function, allow posting the phase in the message
and actually do an FFT with the requested number of bands instead
of interpolating.
* tests/check/elements/spectrum.c: (GST_START_TEST),
(spectrum_suite):
Improve the units tests by checking for a 11025Hz sine wave
and add unit tests for all 4 supported sample types.
2007-09-06 07:21:22 +00:00
|
|
|
const guint8 *samples;
|
gst/spectrum/Makefile.am: Link to base libraries
Original commit message from CVS:
* gst/spectrum/Makefile.am:
Link to base libraries
* gst/spectrum/demo-osssrc.c: (main):
use new threshhold property
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_set_sink_caps),
(gst_spectrum_get_sink_caps), (gst_spectrum_chain),
(gst_spectrum_change_state):
* gst/spectrum/gstspectrum.h:
Use gst_adapter, support multiple-channels, add threshold property for
result, add docs, fix resulting spectrum range (was including mirrored
results)
2006-05-21 16:23:23 +00:00
|
|
|
|
Port GstSpectrum to GstAudioFilter and libgstfft, add support for int32, float and double, use floats for the message...
Original commit message from CVS:
* configure.ac:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-audiotest.c: (draw_spectrum),
(message_handler), (main):
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (message_handler):
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_start),
(gst_spectrum_setup), (gst_spectrum_message_new),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Port GstSpectrum to GstAudioFilter and libgstfft, add support
for int32, float and double, use floats for the message contents,
average all FFTs done in one interval for better results, use
a better windowing function, allow posting the phase in the message
and actually do an FFT with the requested number of bands instead
of interpolating.
* tests/check/elements/spectrum.c: (GST_START_TEST),
(spectrum_suite):
Improve the units tests by checking for a 11025Hz sine wave
and add unit tests for all 4 supported sample types.
2007-09-06 07:21:22 +00:00
|
|
|
samples = gst_adapter_peek (spectrum->adapter, wanted);
|
gst/spectrum/Makefile.am: Link to base libraries
Original commit message from CVS:
* gst/spectrum/Makefile.am:
Link to base libraries
* gst/spectrum/demo-osssrc.c: (main):
use new threshhold property
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_set_sink_caps),
(gst_spectrum_get_sink_caps), (gst_spectrum_chain),
(gst_spectrum_change_state):
* gst/spectrum/gstspectrum.h:
Use gst_adapter, support multiple-channels, add threshold property for
result, add docs, fix resulting spectrum range (was including mirrored
results)
2006-05-21 16:23:23 +00:00
|
|
|
|
Port GstSpectrum to GstAudioFilter and libgstfft, add support for int32, float and double, use floats for the message...
Original commit message from CVS:
* configure.ac:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-audiotest.c: (draw_spectrum),
(message_handler), (main):
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (message_handler):
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_start),
(gst_spectrum_setup), (gst_spectrum_message_new),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Port GstSpectrum to GstAudioFilter and libgstfft, add support
for int32, float and double, use floats for the message contents,
average all FFTs done in one interval for better results, use
a better windowing function, allow posting the phase in the message
and actually do an FFT with the requested number of bands instead
of interpolating.
* tests/check/elements/spectrum.c: (GST_START_TEST),
(spectrum_suite):
Improve the units tests by checking for a 11025Hz sine wave
and add unit tests for all 4 supported sample types.
2007-09-06 07:21:22 +00:00
|
|
|
spectrum->process (spectrum, samples);
|
gst/spectrum/Makefile.am: Link to base libraries
Original commit message from CVS:
* gst/spectrum/Makefile.am:
Link to base libraries
* gst/spectrum/demo-osssrc.c: (main):
use new threshhold property
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_set_sink_caps),
(gst_spectrum_get_sink_caps), (gst_spectrum_chain),
(gst_spectrum_change_state):
* gst/spectrum/gstspectrum.h:
Use gst_adapter, support multiple-channels, add threshold property for
result, add docs, fix resulting spectrum range (was including mirrored
results)
2006-05-21 16:23:23 +00:00
|
|
|
|
Port GstSpectrum to GstAudioFilter and libgstfft, add support for int32, float and double, use floats for the message...
Original commit message from CVS:
* configure.ac:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-audiotest.c: (draw_spectrum),
(message_handler), (main):
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (message_handler):
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_start),
(gst_spectrum_setup), (gst_spectrum_message_new),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Port GstSpectrum to GstAudioFilter and libgstfft, add support
for int32, float and double, use floats for the message contents,
average all FFTs done in one interval for better results, use
a better windowing function, allow posting the phase in the message
and actually do an FFT with the requested number of bands instead
of interpolating.
* tests/check/elements/spectrum.c: (GST_START_TEST),
(spectrum_suite):
Improve the units tests by checking for a 11025Hz sine wave
and add unit tests for all 4 supported sample types.
2007-09-06 07:21:22 +00:00
|
|
|
spectrum->num_frames += nfft;
|
gst/spectrum/: port to use message to get results, cleanly exit when closing the window
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (on_window_destroy),
(draw_spectrum), (message_handler), (main):
* gst/spectrum/demo-osssrc.c: (on_window_destroy), (draw_spectrum),
(message_handler), (main):
port to use message to get results, cleanly exit when closing the window
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_get_property),
(gst_spectrum_set_caps), (gst_spectrum_start),
(gst_spectrum_message_new), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
port to derive from basetransform and send results via messages
(like level element)
2006-06-16 09:49:07 +00:00
|
|
|
endtime += blktime;
|
|
|
|
/* do we need to message ? */
|
|
|
|
if (spectrum->num_frames >=
|
Port GstSpectrum to GstAudioFilter and libgstfft, add support for int32, float and double, use floats for the message...
Original commit message from CVS:
* configure.ac:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-audiotest.c: (draw_spectrum),
(message_handler), (main):
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (message_handler):
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_start),
(gst_spectrum_setup), (gst_spectrum_message_new),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Port GstSpectrum to GstAudioFilter and libgstfft, add support
for int32, float and double, use floats for the message contents,
average all FFTs done in one interval for better results, use
a better windowing function, allow posting the phase in the message
and actually do an FFT with the requested number of bands instead
of interpolating.
* tests/check/elements/spectrum.c: (GST_START_TEST),
(spectrum_suite):
Improve the units tests by checking for a 11025Hz sine wave
and add unit tests for all 4 supported sample types.
2007-09-06 07:21:22 +00:00
|
|
|
GST_CLOCK_TIME_TO_FRAMES (spectrum->interval, rate)) {
|
gst/spectrum/: port to use message to get results, cleanly exit when closing the window
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (on_window_destroy),
(draw_spectrum), (message_handler), (main):
* gst/spectrum/demo-osssrc.c: (on_window_destroy), (draw_spectrum),
(message_handler), (main):
port to use message to get results, cleanly exit when closing the window
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_get_property),
(gst_spectrum_set_caps), (gst_spectrum_start),
(gst_spectrum_message_new), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
port to derive from basetransform and send results via messages
(like level element)
2006-06-16 09:49:07 +00:00
|
|
|
if (spectrum->message) {
|
Port GstSpectrum to GstAudioFilter and libgstfft, add support for int32, float and double, use floats for the message...
Original commit message from CVS:
* configure.ac:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-audiotest.c: (draw_spectrum),
(message_handler), (main):
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (message_handler):
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_start),
(gst_spectrum_setup), (gst_spectrum_message_new),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Port GstSpectrum to GstAudioFilter and libgstfft, add support
for int32, float and double, use floats for the message contents,
average all FFTs done in one interval for better results, use
a better windowing function, allow posting the phase in the message
and actually do an FFT with the requested number of bands instead
of interpolating.
* tests/check/elements/spectrum.c: (GST_START_TEST),
(spectrum_suite):
Improve the units tests by checking for a 11025Hz sine wave
and add unit tests for all 4 supported sample types.
2007-09-06 07:21:22 +00:00
|
|
|
GstMessage *m;
|
|
|
|
|
|
|
|
/* Calculate average */
|
|
|
|
for (i = 0; i < spectrum->bands; i++) {
|
|
|
|
spect_magnitude[i] /= spectrum->num_fft;
|
|
|
|
spect_phase[i] /= spectrum->num_fft;
|
|
|
|
}
|
|
|
|
|
|
|
|
m = gst_spectrum_message_new (spectrum, endtime);
|
gst/spectrum/: port to use message to get results, cleanly exit when closing the window
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (on_window_destroy),
(draw_spectrum), (message_handler), (main):
* gst/spectrum/demo-osssrc.c: (on_window_destroy), (draw_spectrum),
(message_handler), (main):
port to use message to get results, cleanly exit when closing the window
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_get_property),
(gst_spectrum_set_caps), (gst_spectrum_start),
(gst_spectrum_message_new), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
port to derive from basetransform and send results via messages
(like level element)
2006-06-16 09:49:07 +00:00
|
|
|
|
|
|
|
gst_element_post_message (GST_ELEMENT (spectrum), m);
|
|
|
|
}
|
Port GstSpectrum to GstAudioFilter and libgstfft, add support for int32, float and double, use floats for the message...
Original commit message from CVS:
* configure.ac:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-audiotest.c: (draw_spectrum),
(message_handler), (main):
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (message_handler):
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_start),
(gst_spectrum_setup), (gst_spectrum_message_new),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Port GstSpectrum to GstAudioFilter and libgstfft, add support
for int32, float and double, use floats for the message contents,
average all FFTs done in one interval for better results, use
a better windowing function, allow posting the phase in the message
and actually do an FFT with the requested number of bands instead
of interpolating.
* tests/check/elements/spectrum.c: (GST_START_TEST),
(spectrum_suite):
Improve the units tests by checking for a 11025Hz sine wave
and add unit tests for all 4 supported sample types.
2007-09-06 07:21:22 +00:00
|
|
|
memset (spect_magnitude, spectrum->bands * sizeof (gfloat), 0);
|
|
|
|
memset (spect_phase, spectrum->bands * sizeof (gfloat), 0);
|
gst/spectrum/: port to use message to get results, cleanly exit when closing the window
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (on_window_destroy),
(draw_spectrum), (message_handler), (main):
* gst/spectrum/demo-osssrc.c: (on_window_destroy), (draw_spectrum),
(message_handler), (main):
port to use message to get results, cleanly exit when closing the window
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_get_property),
(gst_spectrum_set_caps), (gst_spectrum_start),
(gst_spectrum_message_new), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
port to derive from basetransform and send results via messages
(like level element)
2006-06-16 09:49:07 +00:00
|
|
|
spectrum->num_frames = 0;
|
Port GstSpectrum to GstAudioFilter and libgstfft, add support for int32, float and double, use floats for the message...
Original commit message from CVS:
* configure.ac:
* gst/spectrum/Makefile.am:
* gst/spectrum/demo-audiotest.c: (draw_spectrum),
(message_handler), (main):
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (message_handler):
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_start),
(gst_spectrum_setup), (gst_spectrum_message_new),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Port GstSpectrum to GstAudioFilter and libgstfft, add support
for int32, float and double, use floats for the message contents,
average all FFTs done in one interval for better results, use
a better windowing function, allow posting the phase in the message
and actually do an FFT with the requested number of bands instead
of interpolating.
* tests/check/elements/spectrum.c: (GST_START_TEST),
(spectrum_suite):
Improve the units tests by checking for a 11025Hz sine wave
and add unit tests for all 4 supported sample types.
2007-09-06 07:21:22 +00:00
|
|
|
spectrum->num_fft = 0;
|
gst/spectrum/: port to use message to get results, cleanly exit when closing the window
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (on_window_destroy),
(draw_spectrum), (message_handler), (main):
* gst/spectrum/demo-osssrc.c: (on_window_destroy), (draw_spectrum),
(message_handler), (main):
port to use message to get results, cleanly exit when closing the window
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_get_property),
(gst_spectrum_set_caps), (gst_spectrum_start),
(gst_spectrum_message_new), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
port to derive from basetransform and send results via messages
(like level element)
2006-06-16 09:49:07 +00:00
|
|
|
}
|
2006-10-06 11:31:11 +00:00
|
|
|
|
|
|
|
gst_adapter_flush (spectrum->adapter, wanted);
|
2001-12-22 23:26:33 +00:00
|
|
|
}
|
|
|
|
|
gst/spectrum/: port to use message to get results, cleanly exit when closing the window
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (on_window_destroy),
(draw_spectrum), (message_handler), (main):
* gst/spectrum/demo-osssrc.c: (on_window_destroy), (draw_spectrum),
(message_handler), (main):
port to use message to get results, cleanly exit when closing the window
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_get_property),
(gst_spectrum_set_caps), (gst_spectrum_start),
(gst_spectrum_message_new), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
port to derive from basetransform and send results via messages
(like level element)
2006-06-16 09:49:07 +00:00
|
|
|
return GST_FLOW_OK;
|
gst/spectrum/Makefile.am: Link to base libraries
Original commit message from CVS:
* gst/spectrum/Makefile.am:
Link to base libraries
* gst/spectrum/demo-osssrc.c: (main):
use new threshhold property
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_dispose),
(gst_spectrum_set_property), (gst_spectrum_set_sink_caps),
(gst_spectrum_get_sink_caps), (gst_spectrum_chain),
(gst_spectrum_change_state):
* gst/spectrum/gstspectrum.h:
Use gst_adapter, support multiple-channels, add threshold property for
result, add docs, fix resulting spectrum range (was including mirrored
results)
2006-05-21 16:23:23 +00:00
|
|
|
}
|
|
|
|
|
2001-12-22 23:26:33 +00:00
|
|
|
static gboolean
|
2004-03-14 22:34:33 +00:00
|
|
|
plugin_init (GstPlugin * plugin)
|
2001-12-22 23:26:33 +00:00
|
|
|
{
|
2004-03-14 22:34:33 +00:00
|
|
|
return gst_element_register (plugin, "spectrum", GST_RANK_NONE,
|
|
|
|
GST_TYPE_SPECTRUM);
|
2001-12-22 23:26:33 +00:00
|
|
|
}
|
|
|
|
|
2004-03-14 22:34:33 +00:00
|
|
|
GST_PLUGIN_DEFINE (GST_VERSION_MAJOR,
|
|
|
|
GST_VERSION_MINOR,
|
|
|
|
"spectrum",
|
|
|
|
"Run an FFT on the audio signal, output spectrum data",
|
2006-04-01 10:09:11 +00:00
|
|
|
plugin_init, VERSION, GST_LICENSE, GST_PACKAGE_NAME, GST_PACKAGE_ORIGIN)
|